Abstract
Background
Ample quantities of ashes generated from domestic biomass energy combustion in Ghanaian kitchens are currently disposed of despite their potential agricultural value. This study aimed to investigate the potential agricultural value of charcoal and firewood ashes in terms of differences in the chemical and mineralogical compositions, and to identify the suitability of aqua regia, H2SO4, vinegar and distilled water to extract plant nutrients (Ca, Mg, K, Na, and P). The chemical compositions were determined by atomic absorption spectrometry after extractions with aqua regia, H2SO4, vinegar and distilled water while mineralogy was determined by X-ray powder diffraction.
Results
The charcoal ash had 0.2 units, 13 ds m−1, and 7% higher (P < 0.05) pH, EC, and CCE, respectively, than the firewood ash, whereas the latter had 6, 17, 43, and 139 µg g−1 higher (P < 0.05) As, Cu, Mg, and Zn contents, respectively, and more minerals with 86% being Mg-rich. Calcite and calcium oxide were the dominant minerals occurring in both ashes followed by calcium manganate (CaMnO3). Aqua regia and vinegar were suitable for Ca, acidic solutions for Mg, H2SO4 and aqua regia for P with Na and K being virtually soluble in all solutions. Lead, Mn, Ni, and Zn had values in the order of hundreds.
Conclusions
Although the ashes differ, they both contain trace elements whose bioavailability may differ and may not necessarily lead to plant uptake after field application. This offers an opportunity for further research into the threshold trace element contents of wood ash and their relationship with plant uptake in different soil pH and soil types.
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1186%2Fs40538-019-0171-2/MediaObjects/40538_2019_171_Figa_HTML.png)
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Background
Wood ash is a waste product of biomass combustion, but it contains substantial amounts of plant nutrients such as calcium (Ca), potassium (K), magnesium (Mg), and phosphorus (P) [1,2,3]. This composition of wood ash makes it a valuable fertilizer to increase the yields of crop and forest products [1, 4, 5]. Previous studies revealed that wood ash has an acid-neutralizing capacity, expressed as calcium carbonate equivalence (CCE), in the range of 17–95% [6, 7]. The actual chemical composition of wood ash depends on the type and source of the biomass, combustion type and temperature used for its production [4, 8, 9].
Beside its acid-neutralizing capacity and fertilizer value, wood ash may also increase the basic cation contents and the effective CEC of some soils [3, 10]. Due to the variable composition of wood ash, a random application rate to a particular soil may be injurious to both soil and crop health as a result of shocks caused by sudden pH increase. For instance, at an application rate of 25 g kg soil−1, Nabeela et al. [5] found detrimental effects on Brassica napus L. compared with lower rates of 1 and 10 g kg soil−1, suggesting possible plant-specific responses to the application of ash. Wood ash reacts faster than regular liming materials because of the finer particles and leads to high initial pH increases that seldom last [2].
Major nutrient elements in ash exist in different crystalline forms, which have different solubility in different extraction solutions [11]. Therefore, different extraction solutions were tested. Vinegar as non-traditional extraction solution was included to test its efficacy to extract the major nutrient elements in case poor farmers are not able to access regular acids. The mineral composition of the ashes was examined to differentiate their various crystalline forms and associations.
Wood ash contains substantial but variable amounts of trace elements, particularly, Cd, Cu, Pb, and Zn [1, 2] and may also contain some polycyclic aromatic hydrocarbons [12, 13] that may limit its use as a plant nutrient and pose hazards to the environment. However, the total quantities of the trace elements may not necessarily translate into bioavailable forms due to differences in solubility, which may be influenced by rhizosphere and soil factors. For instance, high amounts of Cd, Cr, Cu, Mn, Pb, and Zn were found in sewage sludge ash [14], which did not accumulate in the edible parts of oats (Avena sativa L.) and rapeseed (Brassica napus L.) after application. Conversely, other studies have shown that plants take up trace elements through applied wood ash [5]. In this case, plant and soil conditions may have played a role in metal accumulation.
Biomass energy has been the major source of domestic energy in the past. Until now, over 80% of the population in sub-Saharan Africa still depends on biomass energy [15]. Cross-sectional time series data for 20 countries of sub-Sahara Africa reveal that wood fuel accounts for 70% of energy consumption [16]. In Ghana, 90% of rural households depend on firewood for cooking compared to 61% charcoal use by urban residents [17]. The share of biomass to the primary energy supply was 36.9% in 2018 [18]. Apart from domestic use, local eateries also use huge amounts of biomass fuel in Ghana [17]. Although the Ghana Government discouraged biomass fuel use by promoting the use of liquefied petroleum gas (LPG) in the past decade. Unfortunately, such efforts have fallen short of sustainability due to recurrent shortages and price hikes of LPG [19]. During these times, many urban residents resort to cheap options such as charcoal [17]. The Strategic National Energy Plan 2006–2020 of the Ghana Energy Commission estimates that the use of biomass fuel is expected to increase alongside non-biomass fuel due to rising populations [17]. During the last 10 years, the supply of woodfuels for charcoal and firewood was increasing [18].
It is obvious that biomass energy use in Ghana may persist for decades [19] and continuously generate ash, which constitutes a substantial fraction of municipal solid waste disposed in poorly organized waste dumps. The fertilizer value of ash could be harnessed and utilized in the Ghanaian agricultural system, particularly in urban and peri-urban agriculture (UPA) where it could improve crop yields, enhance the livelihoods of poor UPA farmers and enhance urban food security in Ghana. UPA is a vital livelihood strategy in sub-Saharan Africa (SSA), employing over 10% of the population [20]. In Ghana, UPA employs about 800–1000 farmers in Accra alone where it improves urban food security and alleviates poverty [21]. However, soil nutrient mining caused by continuous cultivation without substantial nutrient enrichment is one of the challenges of UPA in Ghana [21]. Wood ash could be used to supplement the existing but limited fertilizer sources used by UPA famers. Due to large and frequent biomass fuel use by the eateries, large amounts of wood ash are expected to be produced within short intervals compared to households. The nutrient content of wood ash makes it a potential source of cheap fertilizer to supplement the prevalent poultry manure used in UPA in Ghana [21] and increase food security.
Many studies exist on industrial wood ash comprising mostly fly and bottom ash or coal ash [9, 22]. Studies characterizing wood ash generated from the combustion of firewood on the one hand and that of charcoal on the other hand are scarce. While ash from charcoal is a product of slow pyrolysis under anoxic conditions and followed by combustion under oxic conditions, firewood, on the other hand, is a product of direct combustion of wood under oxic conditions. Further, some constituents are likely to volatilize along with the formation of other minerals in the ashes owing to the influence of temperature, there is bound to be differences in their compositions. The aims of this study were to (i) investigate the differences in the chemical and mineralogical compositions; and (ii) identify the suitability of aqua regia, H2SO4, vinegar and distilled water to extract plant nutrients (Ca, Mg, K, Na, and P). The ultimate goal was to characterize the ashes produced from local kitchens for properties that are critical for their potential utilization in UPA. The underlying hypothesis is that charcoal and firewood ashes are both highly suitable as fertilizers UPA in terms of their nutrient contents without threat of containing excessive toxic trace elements.
Material and methods
Study sites and sampling
The ash samples were collected from kitchens from five regional capital cities in southern Ghana namely, Accra (Greater Accra Region), Cape Coast (Central Region), Ho (Volta Region), Koforidua (Eastern Region) and Sekondi-Takoradi (Western Region). Most of the charcoal used in the urban areas originates from the hinterlands, particularly from the forest, transitional and savannah ecological zones of Ghana. The firewood used in most cities rather comes from “regular firewood” with and without wood bark such as timber wastes, from bamboo or wood wastes from construction sites. The kitchens comprised food vendors, eateries, and some secondary schools. The “false cardinal points” were defined using major roads that cross each other near or around each city center to form four hypothetical segments (Fig. 1). Each of these segments represented a zone making four zones per city within which the ashes were sampled. This approach was adopted with the assumption that the nature of settlements differs with the city and that most eateries and food vendors follow traffic flow, which also has a bearing on demand for food. This was however not applicable to the schools. In each city, six sacks lined with plastic bags were left each zone for charcoal and firewood ashes except for Accra where eight sacks were left to avoid having many missing samples. This is because the hassles of life in Accra could restrain people from commitments such as ash sampling and safekeeping for days. The sacks were retrieved after a week and transported to the University of Ghana, main campus for further processing. The dominant color of the ashes was light grey. The charcoal ash comprised a few greyish and greyish olive colors while the firewood ash was mainly greyish olive. Light grey is a common color of most ashes, although a few greyish and greyish olive colors exist. This seems to depend on the type of biomass. For instance, ashes from Parkia biglobosa (Jacq.) R. Br. ex G. Don. (African locust bean) and Vitellaria paradoxa G. Don (shea tree) often have light grey colors while those of many eucalyptus species is greyish olive (Neina, unpublished data).
Ash pH, electrical conductivity, and calcium carbonate equivalence
The samples were composited, passed through a 1-mm sieve and kept for laboratory analysis. The electrical conductivity (EC) and pH of the ash were measured in 1:5 ash–water ratio using a multi-parameter pH/EC meter (PL-700AL, Gondo Electronics, Taiwan) after shaking for 30 min and leaving to stand for 1 h. The CCE was determined by digesting ash (< 1 mm) with 1 mol L−1 HCl [6, 14, 23]. Ash (1 g) was weighed into 100 mL conical flasks, 50 mL of 1 mol L−1 HCl were added, shaken and left overnight. The digest was homogenized on a magnetic stirrer and filtered. Afterwards, 10 mL of the filtrate was pipetted into a 50-mL conical flask, diluted with 10 mL distilled water. Three drops of methyl red indicator were added and titrated with 0.5 mol L−1 NaOH solution to a pH 7 endpoint. Four blanks (i.e., 1 mol L−1 HCl solution without ash) were included and treated in a similar manner. The CCE was calculated using the equation:
where a is mL NaOH used for blank titrations; b is mL NaOH used for titration of the soil sample; S is weight of oven-dried ash (g); M is concentration of NaOH solution (mol L−1).
Analysis of nutrient elements and trace element contents
Analysis of plant nutrient elements was carried out using an atomic absorption spectrometer, a mercury analyzer and a spectrophotometer after extraction with aqua regia (10.5 mL 37% HCl, 3.5 mL 69% HNO3), concentrated H2SO4, vinegar (spirit vinegar, NCP Alcohols, Durban, South Africa) and distilled water. For the acid extractions solutions, 500 mg of the fine fractions (1 mm) was mixed with the solutions and allowed to stand overnight. Afterwards, distilled water was added to the mixture and allowed to boil over a magnetic stirrer for 5 min. The suspension was filtered using 150-mm qualitative filter paper (Grade 413 filter paper, qualitative; VWR International) and measured for the target constituents. Four replicates of 50 mg of BCR-038 coal fly ash reference materials (Institute for Reference Materials and Measurements, Joint Research Centre, European Commission) was included and treated in a similar manner for internal checks. Water extracts were obtained by shaking 500 mg of ash in 30 mL distilled water and filtered.
Total nutrient elements (Ca, Mg, K, and Na) and trace element contents (Cd, Cu, Mn, Pb, and Zn) were measured using an Atomic Absorption Spectrometer (AAS) (Perkin Elmer AAnalyst 800, Germany) while As and Ni were detected on a PinAAcle 900T Atomic Absorption Spectrometer (Perkin Elmer). Total trace element contents were measured only in the aqua regia extracts. For mercury (Hg) analysis, the dry ash samples were subjected to Solid Thermal Decomposition Atomic Absorption Spectrophotometry (EPA7473) using a DMA-80 Tri-cell direct mercury analyzer (Milestone, Sorisole, Italy). The content of total phosphorus was measured at 710 nm on a UV/VIS spectrophotometer (Pharo 300 Spectroquant, Merck Millipore, Darmstadt, Germany) after coloration of the extracts with ammonium molybdate and ascorbic acid. In each batch of analysis, four replicates of blank samples were included, which were treated in the same way, but without ash sample.
Mineralogical analysis
Ash samples were subsampled, homogenized and passed through 47 µm before mineralogical analysis by X-ray powder diffraction (XRD). The XRD was performed at the Department of Physics, University of Ghana with the aid of a Philips PANalytical Empyrean Series 2 X-Ray Diffractometer (Almelo, The Netherlands). The scan parameters were 45 kV and 40 mA, having a Cu-Kα radiation and a graphite monochromator. The scan was a continuous type at a speed of 1 s per 0.03 °2-Theta starting from 5.0150 °2-Theta and ending at 69.9650 °2-Theta. The XRD patterns were collected using PANalytical Xpert Data Collector and analyzed with PANalytical HighScore Plus V 3.0.5. Identification of minerals was done with reference data from PANalytical HighScore PDF-2.
Statistical analysis
The data were checked for conformity to the criteria of analysis of variance (ANOVA). Only three zones of Cape Coast charcoal ash samples were retrieved. Therefore, we substituted the missing value with the mean of the three values plus the standard deviation (mean of N = 3 + SD) for the purpose of statistics. Where the criteria of ANOVA were not met, the data were either log- or square root-transformed, and the level of significance was set at 5%. Two-way ANOVA was used to analyze the data using the ash type and city as the independent factors. The means from ANOVA were separated using the Holm–Sidak post hoc test. The interrelationships between extracted elements were tested by Pearson correlation analysis. Statistical analyses were performed using SPSS version 20 (IBM-SPSS, USA) and Sigma Plot 13 (Systat Software, USA).
Results
Ash pH, electrical conductivity, and calcium carbonate equivalence
The charcoal ash had a slightly more alkaline pH, a higher EC and CCE. Specifically, the mean pH of charcoal ash was 0.2 pH units higher (P = 0.02) than the firewood ash (Table 1) and showed almost no variation among cities. The mean EC of the charcoal ash was also 13 dS m−1 higher (P = 0.01) than the firewood ash, showing differences among the cities (P = 0.04). Further, the mean CCE of the charcoal ash was 7% higher (P < 0.01) than that of the firewood and differed (P = 0.02) among the cities.
Elemental composition
The trace element (As, Cd, Cu, Hg, Mn, Ni, Pb, and Zn) contents in both ash types (Table 1) as extracted from the aqua regia varied widely among the samples both within and between the cities. On the average, the elements were present in the order Pb > Mn > Ni > Zn > Cu > Cd > As > Hg for charcoal ash, whereas that of firewood was Pb > Mn > Zn > Ni > Cu > As > Cd > Hg (Table 1). Lead, Mn, Ni, and Zn had values in the order of hundreds. The ANOVA revealed interaction effects (P < 0.05) of ash type and city for Cd, Ni, and Pb contents as well as significantly higher (P < 0.05) contents of As, Cu, and Zn (Fig. 2a) in the firewood ash than in the charcoal ash. The rest of the trace elements (Cd, Hg, Mn, Ni, and Pb) in both ashes did not differ significantly. Manganese and Zn contents were 43 and 139 µg g−1 higher in the firewood ash than in the charcoal ash, respectively, but with no statistical significance for Mn. In contrast, Ni and Pb were 64 and 180 µg g−1 higher in the charcoal ash (Table 1) with no statistical significance.
The amounts of the elements extracted using the solutions varied depending on the elements with all of them being less water-soluble (Table 2). For Ca, the amount of elements extracted was in the order vinegar > aqua regia > H2SO4 > water; aqua regia > H2SO4 > vinegar > water for Mg; vinegar > H2SO4 > aqua regia > water for K; H2SO4 > vinegar > aqua regia > water for Na; and aqua regia > H2SO4 > vinegar > water for P. The elements extracted generally occurred in the order Ca > K > Mg > Na > P. The Mg contents extracted by the acid extraction solutions revealed that the firewood ash contained about 20% more Mg (P < 0.05) than the charcoal ash. Only 0.4% of the total Mg extracted by the acid solutions was soluble in water. The charcoal ash appeared to have more K than the firewood ash in that vinegar and H2SO4 extracted 49 and 20 mg g−1 more K (P < 0.05) in the charcoal ash, respectively, and varied among cities (Table 2). The K extracted by H2SO4 showed interaction effects (P < 0.01) of ash type and city whereby the highest and lowest K were found in the Cape Coast and Accra charcoal ashes (Fig. 2b), respectively. The correlation matrix revealed significant positive relations between K extracted by all solutions (Table 3). Sodium extracted using aqua regia and water showed interaction effects (P < 0.05) of ash type and city and varied among cities (P < 0.05) (Table 2). The H2SO4 and vinegar extracted over twofold the Na contents extracted by aqua regia and water.
Total P was sparingly soluble in vinegar and water compared to aqua regia and H2SO4 (Table 2). However, the charcoal ash P extracted using vinegar was 1.5-fold higher (P < 0.01) than its counterpart. The water-soluble P was only about 0.5–1% of the total P extracted by the acid solutions. P–water did not correlate with P extracted by the three acidic solutions, whereas the latter correlated with each other (Table 3).
Mineralogical composition
The XRD showed that almost all the crystalline minerals present in both ashes were predominantly Ca minerals mostly occurring in association with CO3, Fe, Mg, Mn, and P (Table 4). Calcite (CaCO3) and calcium oxide (CaO) were the most prevalent minerals occurring in both ashes followed by calcium manganate (CaMnO3). Manganese-containing minerals occurred in ten cases while Mg minerals occurred in eight cases. The rest of the minerals occurred in about 20% in the ashes. The firewood ash had more minerals than the charcoal ash. Aluminum and silicon oxides were also present in the firewood ash and could be associated with the sand particles found in the traditional cooking stoves or hearths.
Discussion
Ash pH, electrical conductivity, and calcium carbonate equivalence
Charcoal and firewood ashes differ in their chemical and mineralogical compositions. This is attributed to the fact that charcoal ash is a product of slow pyrolysis under limited oxygen conditions, and combustion under oxygenated conditions coupled with the volatilization of constituents in contrast to firewood ash which is the product of a one-time combustion of wood in its natural form under oxygenated conditions. This was reflected in higher pH, EC, and CCE in the charcoal ash in contrast to firewood ash. The pH values obtained for the firewood ash are similar to those found in Rwandan ashes from eucalyptus wood-dominated charcoal and firewood collected over a 3-month period (Neina, unpublished data). Similarly, a pH of 13.8 in a mix of firewood and charcoal were found in ashes from Accra, Ghana [4], while a range of 9–13.5 has also been obtained elsewhere [5, 7].
The EC values were close to those of 59 dS m−1 found in a mix of wood and charcoal ashes collected from Accra [4]. Similarly, an EC value of 50 dS m−1 in ash from a kraft pulp mill in the US [8]. This contrasts EC values of 3.1 dS m−1 from the combustion of biomass of only one tree species [5], which may have been different for ashes from different species. Then, the CCE values also fall within the range found by many authors [6,7,8]. Overall, the pH, EC, and CCE values have been associated with the alkali and alkaline earth metals in the ashes which often dominate ashes because of their high vaporization temperatures [23, 24]. Presumably, this change in pH is coupled with changes in ash composition caused by the effects of combustion temperature aside the influence of biomass type and source. For instance, Qian et al. [24] found sharp ash pH increases with temperature from pH 4.9 at 250 °C to pH 10 at 450 °C, during a study on the effects of burn temperature on ash nutrient forms and availability from cattail (Typha domingensis Pers.) and sawgrass (Cladium jamaicense Crantz) in the Florida Everglades. In contrast, the pH increase was from 450 to 550 °C [24].
Elemental composition
Apart from the pH, EC, and CCE, the analysis of nutrient elements and trace element contents also suggested that firewood ash had higher As, Cu, Mg, and Zn contents than its counterpart. Arsenic and Cu were found in smaller amounts while Zn was among the four trace elements (Mn, Ni, Pb, and Zn) which occurred in the order of hundreds. This corroborates the findings on bottom and fly ashes [25, 26]. These elements are the most prevalent trace elements in some soils of Ghana [27], which might the reason for their prevalence in the ashes. This, however, contradicts the findings on bottom and fly ashes of Municipal solid wastes [28]. The amounts of elements extracted by the extractants were in the order, vinegar > aqua regia > H2SO4 > water whereas that of specific elements extracted occurred in the order Ca > K > Mg > Na > P for both ashes. This contrasts the results of others [14, 29, 30] who found the order Ca > Mg > K > Na. It is obvious from the relationships that aqua regia and vinegar are suitable for Ca; acidic extractants for Mg; aqua regia and H2SO4 for P and H2SO4 and almost all the solutions vinegar for K and Na (Table 2).
Higher contents of Ca have been reported in previous studies on ashes [9, 22, 31]. Calcium and Mg minerals have been found in many studies on bottom and fly ashes [9, 22, 25]. Potassium followed Ca and agrees with results of Misra et al. [29]. Earlier studies by Neina and Dowuona [3] showed that water-soluble K constituted 43% of the acid-extractable K. In ashes generated from open combustion systems, K and Na are mostly water-soluble [5, 24]. Many ashes are a source of K in the form of potash or alkali for local soap making and for cooking in many African countries [32,33,34].
Mineralogical composition
The mineral compounds found in the ashes are the basis for their composition revealing the differences between charcoal and firewood. This is reflected in more mineral compounds in firewood ash. These differences can be attributed to the effects of combustion temperature as earlier noted [24, 35, 36]. This lead to the increase of less volatile components [24] producing marked differences in the mineral constituents. During combustion, decomposition and volatilization occur and are mostly responsible for the disappearance [29] of ash constituents such as CaCO3, CaO, As, Cd, Pb, Hg, and Zn [30, 37, 38]. Decomposition of hydroxides of Ca and Mg, and CaCO3 has been found to occur at temperatures of 350–450 °C and 500–600 °C, respectively [39]. At pyrolysis temperatures of (500–800 °C) [39, 40], CaCO3 and K2Ca(CO3)2 dominate [29, 39] along with a soluble alkalinity, which decreases between 800 and 1000 °C [39]. Volatilization may have reduced contents of Mg, As, Cu, Zn, and the range of minerals compounds in the charcoal ash.
Aside from the effect combustion temperature, oxic or anoxic conditions play a role in ash composition. This could have resulted in the presence of many oxide minerals in the firewood ash, which is a product of direct combustion under oxic conditions. For the charcoal ash, the first step of combustion involves slow pyrolysis at temperatures between 400 and 500 °C [40, 41] followed by combustion under oxic conditions of varying extents depending the kind of stove used. For instance, in Ghana, charcoal is either burnt in clay and metal cooking stoves of different forms, shapes, and sizes, which may affect the oxygen supply during the combustion and subsequently the ash composition. Another factor that may play a role in ash composition is the presence of Si, Mn, Fe, Al which can readily form acidic oxides [29]. In some cases, new minerals such as portlandite can be formed when ash is wetted [22]. In some of the firewood ashes, the food vendors used water to quench the ambers before collecting the ash. This could be the source of portlandite in ashes.
There may be concerns over the magnitude of Mn, Ni, Pb, and Zn, there seems to be a threshold application rate beyond, which the elements may accumulate in plants [5, 42]. The accumulation of trace elements in plants is often associated with increased ash application [5, 43]. Nevertheless, soil pH has been found to be the main determinant of element leaching and uptake [43]. Nonetheless, this creates another opportunity for further research on the threshold trace element contents of wood ash and their relationship with plant uptake in different soil pH and soil types. This study was designed as a start-up for future agronomic and microbial studies in the field. Therefore, the uptake of the trace elements by plants and soil microorganisms cannot be determined in the current study as this process is strongly affected by plant species and variety, soil pH and soil solution chemistry.
Conclusions
The mineralogical composition of the ash types will give important information on their future behavior as fertilizer in soil. The charcoal ash had higher pH, EC, CCE and K, whereas the firewood ash contained more minerals and had higher As, Cu, Mg, and Zn contents. However, the differences in the ash compositions may not dictate which of them will make a better fertilizer supplement for UPA. Therefore, these ashes could be an important source of K for root or carbohydrate-rich crops. This study revealed that charcoal ash had higher CCE, EC, pH, and P and K contents, whereas the firewood ash had more minerals with 86% containing Mg, and higher contents of As, Cu, Mg and Zn than the charcoal ash. However, the trace element contents were usually below allowable limits required for ash application as fertilizers except for poorly soluble Pb and Ni. Aqua regia and vinegar are suitable for Ca, all solutions for K, the “stronger acids” and water for Na, all acids for Mg and aqua regia and H2SO4 for P. This study is not meant to promote biomass energy use but to harness plant nutrients present in ash wastes produced as part of municipal solid wastes and encourage its utilization in agriculture thus reducing the amount of wastes for disposal and also recycle as many nutrients as possible in the ecosystem.
Availability of data and materials
All data generated or analyzed during this study are included in this published article.
Abbreviations
- AR:
-
aqua regia
- CCE:
-
calcium carbonate equivalence
- CEC:
-
cation exchange capacity
- EC:
-
electrical conductivity
- GEC:
-
Ghana Energy Commission
- LPG:
-
liquefied petroleum gas
- SA:
-
sulfuric acid
- UPA:
-
urban and peri-urban agriculture
- XRD:
-
X-ray powder diffraction
References
Park BB, Yanai RD, Sahm JM, Ballard BALPD. Wood ash effects on soil solution and nutrient budgets in a willow bioenergy plantation. Water Air Soil Pollut. 2004;159:209–24.
Pasquini MW, Alexander MJ. Chemical properties of urban waste ash produced by open burning on the Jos Plateau: implications for agriculture. Sci Total Environ. 2004;319:225–40.
Neina D, Dowuona GNN. Short-term effects of human urine fertiliser and wood ash on soil pH and electrical conductivity. J Agric Rural Dev Trop. 2013;114:89–100.
Merino A, Otero V, Omil B, Lastra B, Piñeiro V, Gallego PP. Application of wood ash compared with fertigation for improving the nutritional status and fruit production of kiwi vines. J Plant Nutr Soil Sci. 2006;169:127–33.
Nabeela F, Murad W, Khan I, Mian IA, Rehman H, Adnan M, Azizullah A. Effect of wood ash application on the morphological, physiological and biochemical parameters of Brassica napus L. Plant Physiol Biochem. 2015;95:15–25.
Ohno T, Erich MS. Effect of wood ash application on soil pH and soil test nutrient levels. Agric Ecosyst Environ. 1990;32:223–39.
Demeyer A, Voundi Nkana JC, Verloo MG. Characteristics of wood ash and influence on soils properties and nutrient uptake: an overview. Bioresour Technol. 2001;77:287–95.
Patterson SJ, Acharya SN, Thomas JE, Bertschi AB, Rothwell RL. Barley biomass and grain yield and canola seed yield response to land application of wood ash. Agron J. 2004;96:971–7.
Lanzerstorfer C. Chemical composition and physical properties of filter fly ashes from eight grate-fired biomass combustion plants. J Environ Sci. 2015;30:191–7.
Arvidsson H, Lundkvist H. Effects of crushed wood ash on soil chemistry in young Norway spruce stands. For Ecol Manag. 2003;176:121–32.
Kalmykova Y, Karlfeldt FK. Phosphorus recovery from municipal solid waste incineration fly ash. Waste Manag. 2013;33:1403–10.
Rey-Salgueiro L, García-Falcón MS, Soto-González B, Simal-Gándara J. Procedure to measure the level of polycyclic aromatic hydrocarbons in wood ashes used as fertilizer in agroforestry soils and their transfer from ashes to water. J Agric Food Chem. 2004;52:3900–4.
Pérez-Gregorio MR, García-Falcón MS, Martínez-Carballo E, Simal-Gándara J. Removal of polycyclic aromatic hydrocarbons from organic solvents by ashes wastes. J Hazard Mater. 2010;178:273–81.
Zhang FS, Yamasaki S, Nanzyo M. Waste ashes for use in agricultural production: I. Liming effect, contents of plant nutrients and chemical characteristics of some metals. Sci Total Environ. 2002;284:215–25.
UNDP. The energy access situation in developing countries: a review focusing on the Least Developed Countries and sub-Saharan Africa. Environment and Energy Group, United Nations Development Programme, New York, USA; 2009.
Kebede E, Kagochi J, Jolly CM. Energy consumption and economic development in Sub-Sahara Africa. Energy Econ. 2010;32:532–7.
GEC. Ghana Energy Commission, strategic national energy plan 2006–2020, annex one of four. 2006. https://www.energycom.gov.gh/files/snep/ENERGY%20DEMAND%20final%20PD.pdf. Accessed 20 Dec 2015.
GEC. Ghana Energy Commission, national energy statistics 2009–2018. Strategic planning and policy directorate. 2019. https://www.energycom.gov.gh/files/ENERGY_STATISTICS-2019.pdf. Accessed 21 Oct 2019
Kwakwa PA, Wiafe ED, Alhassan H. Households energy choice in Ghana. Empir Econ. 2013;1:96–103.
FAO. Profitability and sustainability of urban and peri-urban agriculture. Agricultural management, marketing and finance occasional paper 19. Food and Agriculture Organization of the United Nations, Viale delle Terme di Caracalla, 00153 Rome, Italy 19; 2007. xii:95.
Obuobie E, Keraita B, Danso G, Amoah P, Cofie OO, Raschid-Sally L, Drechsel P. Irrigated urban vegetable production in Ghana: characteristics, benefits and risks: IWMI-RUAF-CPWF, Accra, Ghana: IWMI; 2006. p. 150. https://ageconsearch.umn.edu/bitstream/137958/2/Irrigated_Urban_Vegetable_Production_in_Ghana.pdf.
Holmberg SL, Claesson T. Mineralogy of granulated wood ash from a heating plant in Kalmar Sweden. Environ Geol. 2001;40:820–8.
Valmari T. Potassium behaviour during combustion of wood in circulating fluidised power plants. Ph.D. Thesis, Helsinki University of Technology, Finland; 2000.
Qian Y, Miao SL, Gu B. Effects of burn temperature on ash nutrient forms and availability from cattail (Typha domingensis) and Sawgrass (Cladium jamaicense) in the Florida Everglades. J Environ Qual. 2009;38:451–64.
Dahl O, Nurmesniemi H, Pöykiö R, Watkins G. Heavy metal concentrations in bottom ash and fly ash fractions from a large-sized (246 MW) fluidized bed boiler with respect to their Finnish forest fertilizer limit values. Fuel Process Technol. 2010;91:1634–9.
Nurmesniemi H, Mäkelä M, Pöykiö R, Manskinen K, Dahl O. Comparison of the forest fertilizer properties of ash fractions from two power plants of pulp and paper mills incinerating biomass-based fuels. Fuel Process Technol. 2012;104:1–6.
Eze PN, Udeigwe TK, Stietiya MH. Distribution and potential source evaluation of heavy metals in prominent soils of Accra Plains. Ghana. Geoderma. 2010;156:357–62.
Zhao Y. Pollution control and resource recovery: municipal solid wastes incineration: bottom ash and fly ash. Amsterdam: Elsivier; 2016.
Misra MK, Ragland KW, Baker AJ. Wood ash composition as a function of furnace temperature. Biomass Bioenergy. 1993;4:103–16.
Sanders M-L, Andrén O. Ash from cereal and rape straw used for heat production: liming effects and contents of plant nutrients and heavy metals. Water Air Soil Poll. 1997;93:93–108.
Emilsson S. International handbook—from extraction of forest fuels to ash recycling. Stockholm: Swedish Forest Agency, Jönköping; 2006.
Babayemi JO, Adewuyi GO, Obi-Egbedi NO. Evaluation of options in wood waste management: burning and consequent alkali production. J Sustain Dev Environ Prot. 2011;1:98–109.
Kuye AO, Okorie C. Factors affecting the lixiviation of palm bunch ash as a source of alkali for soap production. Ife J Technol. 1990;3:33–7.
Taiwoo OE, Osinowo FAO. Evaluation of various wastes for traditional black soap making. Biores Technol. 2001;79:95–7.
Ulery AL, Graham RC, Amrhein C. Wood-ash composition and soil pH following intense burning. Soil Sci Soc Am J. 1993;156:358–64.
Certini G. Effects of fire on properties of forest soils: a review. Oecologia. 2005;143:1–10.
Pacyna JM. Atmospheric emissions of arsenic, cadmium, lead and mercury from high temperature process in power generation and industry. In: Hutchinson TC, Meema KM, editors. Lead, mercury and arsenic in the environment. New York: Wiley; 1987. p. 69–87.
Gray DB, Watts F, Overcamp TJ. Volatility of arsenic in contaminated clay at high temperatures. Environ. Eng Sci. 2001;8:69–87.
Liodakis S, Katsigiannis G, Kakali G. Ash properties of some dominant Greek forest species. Thermochim Acta. 2005;437:158–67.
FAO. Integrated energy systems in China—the cold Northeastern region experience. 1994. https://www.fao.org/3/a-t4470e/t4470e0a.htm. Accessed 2 May 2017.
Seidel A. Charcoal in Africa: importance, problems and possible solution strategies. Household Energy Programme (HERA), Eschborn, Germany: German Technical Cooperation; 2008.
Pandey VC, Abhilash PC, Upadhyay RN, Tewari DD. Application of fly ash on the growth performance and translocation of toxic heavy metals within Cajanus cajan L.: implication for safe utilization of fly ash for agricultural production. J Hazard Mater. 2009;166:255–9.
Ram LC, Masto RE. Fly ash for soil amelioration: a review on the influence of ash blending with inorganic and organic amendments. Earth Sci Rev. 2014;128:52–74.
Acknowledgements
We are also indebted to Dr. Martin Egblewogbe and Miss. Beatrice Agyapomah for conducting the X-ray diffraction, to Mr. Ransford Okley Tetteh and Miss. Beatrice Kudavor for helping in the ash sampling, the technical support of Mr. Adusei Okrah and the laboratory staff of the Department of Soil Science, Mr. Prince Boateng of the Ecological Laboratory (Ecolab), University of Ghana, and Mr. Mario Boateng of the Department of Marine Science (Marine Laboratory), University of Ghana.
Funding
We wish to acknowledge the financial support of the University of Kassel Strategic Research Fund for supporting this research.
Author information
Authors and Affiliations
Contributions
ND conceived, designed the study with the support of RGJ and collected the data; ND, RGJ and SF analyzed and interpreted the data; ND drafted the manuscript and revised it; RGJ and SF reviewed the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare that they have no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Neina, D., Faust, S. & Joergensen, R.G. Characterization of charcoal and firewood ash for use in African peri-urban agriculture. Chem. Biol. Technol. Agric. 7, 5 (2020). https://doi.org/10.1186/s40538-019-0171-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40538-019-0171-2