1 Correction to: Int J Concr Struct Mater (2021) 15:20 https://doi.org/10.1186/s40069-021-00457-w

Following publication of the original article (Zainal et al., 2021), the authors identified several errors in the article:

  1. 1.

    dr. S. M. Iqbal S. Zainal is also affiliated to Department of Civil Engineering, Universiti Malaysia Sabah, 88400, Sabah, Malaysia.

    The author group and the affiliations list are presented correctly in this correction article.

  2. 2.

    The legends of Figure 2 should be updated as below

    • Figure 2c—Casting of HyFRC on the beam–column joint region

    • Figure 2d—Strain gages installed on the steel reinforcements

    • Figure 2e—Moist-curing of the HyFRC specimens using wet burlap

  3. 3.

    In Table 10 the ‘Trend line equation’ and the ‘Correlation factor’ were merged. Below the correct version of the Table 10.

Table 10 Trend line comparison

The original article (Zainal et al., 2021) has been corrected.