1 Introduction

Satellite communication (SatCom) is regarded as a wishing method to achieve the goal of the next generation wireless communication networks for its own characters, for instance, wide coverage and high energy utilization efficiency [1,2,3]. However, owing to the some practical reasons, the satellite sometimes cannot communicate with the terrestrial users directly, which needs the help of the terrestrial/aerial networks [4,5,6,7,8,9]. On this foundation, the combination of the SatCom and terrestrial/aerial networks appears, which forms the integrated satellite terrestrial/aerial networks (IST/ANs) [10,11,12]. IST/ANs overcome the shortages of the SatCom and terrestrial/aerial networks. Besides, IST/ANs utilize the advantages of the both networks, which have been regarded as the future issue for the next wireless communication networks [13, 14]. IST/ANs have been considered as the important part in the practical systems, such as Digital Video Broadcasting (DVB) networks and the Space-Ground Integrated Information Network Engineering of China [15, 16].

1.1 Related literatures

The investigation for IST/ANs is regarding as a hot topic these years, it has attract so many interests [17,18,19,20]. In [19], the authors proposed a relay selection algorithm for a representative uplink IST/AN, moreover, the outage probability (OP) was investigated along with the asymptotic analysis. In [20], the threshold was introduced into the terrestrial selection algorithm for the considered IST/AN with several terrestrial relays and several users. In addition, the system complexity was further investigated after the OP analysis. In [21], the max-max terrestrial relay/user scheduling algorithm was proposed to improve the system performance, i.e., reducing the OP. In [22], the secondary networks selection algorithm was utilized to enhance the ergodic capacity (EC) for the IST/ANs in the presence for several terrestrial relays and several users. The authors in [23] gave a user scheduling algorithm for an uplink IST/AN with two channel state information (CSI) scenarios. To enhance the spectrum utilization, cognitive technology is used for the IST/ANs [24,25,26]. Through [17], the secure problem was researched for the IST/ANs with cognitive technology, furthermore, the secrecy OP was studied. The authors in [24] researched the secure beamforming issue for the cognitive IST/ANs by using wireless power. In [25], the authors researched the EC for the non-orthogonal multiple access (NOMA)-assisted IST/ANs by utilizing cognitive technology. In [26], the authors proposed an optimization issue by jointly utilizing the terrestrial beamforming design and the satellite scheduling for the IST/ANs. In [27], the authors investigated the delay optimization problem for the IST/ANs by utilizing the multi-tier computing method.

As announced before, high energy utilization efficiency is one of the target requirements of the next generation networks. To achieve this goal, two-way and duplex relay technique come to our sights [28,29,30,31]. Owing to the fact that in the common networks, the relay or the UAV will take two time slots for the whole communication in only one transmission link, namely, the uplink transmission link or the downlink [32, 33]. In [34], a two-way terrestrial relay was utilized in the IST/ANs to enhance the transmission, besides, the OP was deeply investigated along with the closed-form expressions. In [35], several two-way terrestrial relays were utilized to enhance the communication quality and improve the energy efficiency in the presence of closed-form and asymptotic expressions for the IST/ANs. In [36], several two-way terrestrial relays were used for the IST/ANs with non-ideal hardware, particularly, the secrecy OP (SOP) was further investigated, besides, the secrecy diversity order and secrecy coding gain were also gotten. In [37], the authors proposed the optimization method, whose goal is optimize the full-duplex IST/ANs with NOMA. In [38], the authors researched the secrecy problem for the IST/ANs against eavesdropping and jamming.

Another famous technology that can improve the energy utilization efficiency is the reconfigurable intelligent surface (RIS) technology [39,40,41]. RIS can save the energy by utilizing the man-made electromagnetic surfaces which can be controlled through electronic tools [42]. RIS has been the widely investigated in the terrestrial networks, also consisted of the UAV networks [43]. In [44], the widely used RIS channel was proposed in this paper, which provided a computable probability density function (PDF) for the terrestrial networks. Besides, the OP was deeply investigated along with the closed-form expressions. In [45], the authors researched the OP for the RIS-enabled IST/ANs with the help of a UAV along with the non-ideal hardware. The most importance was that the famous RIS channel model used came from [44]. In [46], the authors explored the rate-splitting multiple access scheme RIS-enabled vehicle networks along with the UAV and interference. Particularly, the average OP was analyzed. In [47], the capacity of the system was maximized for the RIS-UAV networks in the presence of trajectory and phase shift optimization. In [48], RIS was used in the NOMA-assisted networks to enhance the system performance, particularly, they formulated an optimization issue whose goal is to enhance the sum rate. In [49], the secrecy performance was investigated in the RIS-aided communication systems through the help of UAVs. In [50], the SOP was investigated for the IST/ANs with multiple eavesdroppers, particularly, the accurate expressions for the SOP were along derived. In [51], the authors investigated the impact of simultaneously transmitting and reflecting-RIS on the cognitive IST/ANs, furthermore, the authors obtained closed-form expressions of OP for the secondary users.

As mentioned before, the satellite owns wider coverage when compared with the terrestrial nodes, which leads to the fact that several terrestrial relays/UAVs exist in one satellite transmission beam [52,53,54,55]. In addition, to simplify the analysis, relay selection algorithm is always utilized, through the selection algorithm, two famous algorithms are used in the literatures, namely, the opportunistic relay selection algorithm and partial relay selection algorithm [53, 55]. However, the opportunistic selection scheme needs the whole CSI of the whole links. Thus, the partial selection scheme appears, which needs only the CSI of one transmission link not the whole link which reduces the complexity and can get the acceptable performance [20]. Above all, in our work, we use the partial selection algorithm to analyze the system performance.

1.2 Motivations

To its regret, most of the former works focused on the perfect hardware, which is not practical in real systems. In practical scenarios, the hardware often suffers from several kinds of imperfect limitations, for example high power amplifier nonlinearity, phase noise, and the other issues [56,57,58]. In [59], the authors summarized the whole issues and gave a popular imperfect hardware (IH) model which is widely utilized in so many papers. In [60], the authors researched the influence of IH on the SatCom, besides, the detailed investigations of OP was further investigated. In [61], the effect of IH was analyzed on the secrecy IST/ANs along with NOMA along with opportunistic terrestrial relay selection algorithm. In [19], the influence of IH was investigated for the uplink IST/ANs along with several terrestrial relays. In [20], the authors utilized the threshold-based terrestrial scheduling algorithm for the IST/ANs in the presence of IH, particularly, the impact of IH was investigated for the considered system through the system complexity analysis. Furthermore, the investigations for the SOP were obtained. The influence of IH on the two-way terrestrial relay for the IST/ANs has been investigated in [34, 35]. However, to the authors’ best efforts, the investigations for the RIS-assisted IST/ANs in the presence of a full-duplex UAV remain unreported, especially by considering the IH. The above illustrations motivate the major work of this paper.

1.3 Our contributions

Discussed by the above observations, by both considering the IH, RIS and a duplex UAV into our consideration, this paper investigates the performance for the regarded ISAN by utilizing partial UAV selection scheme. Particularly, self-interference and co-channel interference are also analyzed in this paper. The major work of this paper is given in the following

  • By both taking the IH and duplex UAV relay into our consideration, this paper forms an investigated model, namely, the integrated satellite multiple duplex UAV relay terrestrial networks (ISMDURTNs). In this system model, several UAVs are utilized. In addition, decode-and-forward (DF) scheme is used at UAVs to help the satellite transmit the transmission signals.

  • Upon the considered network, we get the accurate analysis for the OP. To reduce the secrecy complexity, partial UAV selection algorithm is applied to balance the complexity and performance. Moreover, the investigations for the OP are gotten, which can guide the engineering work.

  • The analysis for the OP in high signal-to-noise ratio (SNR) regime is also given. Relied on these derivations, the coding gain and diversity order are also gotten. The results show that IH has great impact on the OP. Besides, partial UAV selection algorithm also has a great influence on the OP.

The remaining of our paper is shown as what follow. In Sect. 2, the system model is illustrated along with the signal transmission process. In Sect. 3, the OP is detailed investigated, particularly, the satellite transmission model, the RIS channel model and the accurate analysis for OP is further researched. In Sect. 4, the asymptotic analysis for the OP is gotten along with the coding gain and diversity order. Through Sect. 5, some representative Monte Carlo (MC) simulation results are given to confirm the theoretical analysis. Finally, the whole summary of our work is provided in Sect. 6.

2 System model and signal transmission

As introduced in Fig. 1, in our work, we investigate an ISMDURTN, which contains a satellite (S), P duplex UAVs (R) and a vehicle user (D). Owing to some practical reasons, the S or UAV cannot transmit the signal to D, directlyFootnote 1. On this foundation, the RIS is installed in a tall building to assist the transmission. Besides, owing to the wide coverage, M interferers are considered to affect the R and D. To balance the system complexity and performance, partial UAV selection algorithm is utilized to gain better system. All the transmission nodes own one antennaFootnote 2. For the whole system, it needs 2 time slots to complete the transmission.

Fig. 1
figure 1

Illustration of the system model

In the 1st time slot, S sends it signal \(s\left( t \right)\) with \(E\left[ {{{\left| {s\left( t \right) } \right| }^2}} \right] = 1\) to R, as R is the duplex relay with two antennas, thus the received signal at R is given as

$$\begin{aligned} {y_{{R_p}}}\left( t \right)&= \sqrt{{P_S}} {h_{S{R_p}}}\left[ {s\left( t \right) + {\eta _S}\left( t \right) } \right] + \sqrt{{P_{R{R_p}}}} {h_{R{R_p}}}\left[ {{s_{R{R_p}}}\left( t \right) + {\eta _{R{R_p}}}\left( t \right) } \right] \nonumber \\& \quad + \sum \limits _{r = 1}^M {\sqrt{{P_{{I_r}}}} } {h_{{I_r}{R_p}}}\left[ {{s_{{I_r}}}\left( t \right) + {\eta _{{I_r}{R_p}}}\left( t \right) } \right] + {n_{{R_p}}}\left( t \right) , \end{aligned}$$
(1)

where \(P_S\) depicts the transmission power for S, \(h_{SR_p}\) depicts the channel issue between S and the pth R which suffers from the shadowed-Rician (SR) fading, \({\eta _S}\left( t \right)\) is the distortion noise cased by the IH [62, 63] that satisfies \(\eta _{S}(t) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,k_{S}^2} \right)\) with \(k_S\) being the IH level [62, 63] at S. \(P_{RR_p}\) depicts the power of the pth R for the self-interference caused by the duplex mode, \(h_{RR_p}\) denotes the channel fading for the self-interference which suffers Rayleigh fading, \({{s_{R{R_p}}}\left( t \right) }\) is the self-interference signal with \(E\left[ {{{\left| {{s_{R{R_p}}}\left( t \right) } \right| }^2}} \right] = 1\), \({\eta _{RR_p}}\left( t \right)\) is the distortion noise cased by the IH that satisfies \(\eta _{RR_p}(t) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,k_{RR_p}^2} \right)\) with \(k_{RR_p}\) denoting the IH level at the pth self-interference R. \(P_{I{r}}\) represents the interference power from the rth I, \(h_{I_rR_p}\) represents the channel shadowing between the rth I and pth R with suffering Rayleigh fading, \({\eta _{I_rR_p}}\left( t \right)\) is the distortion noise cased by the IH that satisfies \(\eta _{{I_rR_p}}(t) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,k_{{I_rR_p}}^2} \right)\) with \(k_{I_rR_p}\) giving as the IH level at the rth I for the \(I_r \rightarrow R_p\) link. \({n_{{R_p}}}\left( t \right)\) represents the additive white Gaussian noise (AWGN) at the pth R with the form as \({n_{{R_p}}}\left( t \right) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,\delta _{R_p}^2} \right)\).

For the 2nd time slot, as announced before, the chosen R re-transmits the received signal \(s\left( t \right)\) to D via the help of the RIS element. At the same time, M interferes affect D by sending the information signal. Finally, the gotten signal at D is seen as

$$\begin{aligned} {y_{R_pD}}\left( t \right)&= \sqrt{{P_{{R_p}}}} \left( {\sum \limits _{i = 1}^N {{h_{R{V_i}}}{e^{j{\varphi _i}}}{h_{{V_i}D}}} } \right) \left[ {s\left( t \right) + {\eta _{{R_p}}}\left( t \right) } \right] \nonumber \\& \quad + \sum \limits _{r = 1}^M {\sqrt{{P_{{I_r}}}} {h_{{I_r}D}}\left[ {{s_{{I_r}}}\left( t \right) + {\eta _{{I_r}D}}\left( t \right) } \right] + } {n_D}\left( t \right) , \end{aligned}$$
(2)

where \(P_{R_p}\) depicts the transmission power for the pth R of the \(R \rightarrow D\) link, N is the number of the RIS elements. \({\varphi _i}\) depicts the phase shift utilized by the ith reflecting factor of the RIS, \(h_{RV_i}\) and \(h_{V_iD}\) are the channel gains with presentations as \({h_{R{V_i}}} = {\chi _i}{e^{ - {\phi _i}}}/\sqrt{{L_{R{V_i}}}}\), \({h_{{V_i}D}} = {\kappa _i}{e^{ - {\theta _i}}}/\sqrt{{L_{{V_i}D}}}\), respectively. \({\chi _i}\) and \({\kappa _i}\) are the Rayleigh random variable with mean \(\sqrt{\pi }/2\) and variance \(\left( {4 - \pi } \right) /4\). \({L_{R{V_i}}} = 10{\log _{10}}\left( {d_{R{V_i}}^\vartheta } \right) + A\) and \({L_{{V_i}D}} = 10{\log _{10}}\left( {d_{{V_i}D}^\vartheta } \right) + A\) denote the path loss, where A denotes as a fixed value which relies on the transmission frequency and transmission environment, \(d_{RV_i}\) and \(d_{V_iD}\) represent the distance of the \(R-RIS\) and \(RIS-D\) links with \(\vartheta\) being the path loss issue. \({{\eta _{{R_p}}}\left( t \right) }\) is the distortion noise cased by the IH that satisfies \(\eta _{R_p}(t) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,k_{R_p}^2} \right)\) with \(k_{R_p}\) being the IH level at the pth transmission R. \(h_{I_rD}\) depicts the channel factor between the rth I and D which suffers from Rayleigh fading, \({{\eta _{{I_rD}}}\left( t \right) }\) represents the distortion noise cased by the IH that satisfies \(\eta _{I_rD}(t) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,k_{I_rD}^2} \right)\) with \(k_{I_rD}\) regarding as the IH level at the rth I for the \(I_r \rightarrow D\) link. \({n_{{D}}}\left( t \right)\) depicts the AWGN at the D which is represented as \({n_{{D}}}\left( t \right) \sim {{\mathcal {C}}{\mathcal {N}}}\left( {0,\delta _{D}^2} \right)\).

From (1), the obtained signal-to-interference-and-noise-plus-distortion ratio (SINDR) is shown as

$$\begin{aligned} {\gamma _{S{R_p}}}= \frac{{{\lambda _{S{R_p}}}}}{{{\lambda _{S{R_p}}}k_S^2 + {\lambda _{R{R_p}}}\left( {1 + k_{R{R_p}}^2} \right) + {\lambda _{I{R_p}}}\left( {1 + k_{{I_r}{R_p}}^2} \right) + 1}}, \end{aligned}$$
(3)

where \({\lambda _{S{R_p}}} = \frac{{{P_S}{{\left| {{h_{S{R_p}}}} \right| }^2}}}{{\delta _{{R_p}}^2}}\), \({\lambda _{R{R_p}}} = \frac{{{P_{R{R_p}}}{{\left| {{h_{R{R_p}}}} \right| }^2}}}{{\delta _{{R_p}}^2}}\) and \({\lambda _{I{R_p}}} = \sum \limits _{r = 1}^M {\frac{{{P_{{I_r}}}{{\left| {{h_{{I_r}{R_p}}}} \right| }^2}}}{{\delta _{{R_p}}^2}}}\).

Owing to the partial selection scheme, the derived SINDR for the first transmission link is given byFootnote 3

$$\begin{aligned} {\gamma _{SR}} = \mathop {\max }\limits _{p \in \left\{ {1, \ldots ,P} \right\} } \left( {{\gamma _{S{R_p}}}} \right) . \end{aligned}$$
(4)

With the help of [45], by letting \({\varphi _i} = {\phi _i} + {\theta _i}\), the maximal output signal for the \(R \rightarrow D\) link is written as

$$\begin{aligned} {y_D}\left( t \right)&= \sqrt{{P_{{R_p}}}} \left( {\sum \limits _{i = 1}^N {{\chi _i}{\kappa _i}} } \right) \left[ {s\left( t \right) + {\eta _{{R_p}}}\left( t \right) } \right] \nonumber \\& \quad + \sum \limits _{r = 1}^M {\sqrt{{P_{{I_r}}}} {h_{{I_r}D}}\left[ {{s_{{I_r}}}\left( t \right) + {\eta _{{I_r}D}}\left( t \right) } \right] + } {n_D}\left( t \right) . \end{aligned}$$
(5)

From (2), the signal-to-noise and distortion ratio (SNDR) for the second transmission link is derived as

$$\begin{aligned} {\gamma _{{R}D}}={\gamma _{{R_p}D}} = \frac{{{\lambda _{{R_p}D}}}}{{{\lambda _{{R_p}D}}k_{{R_p}D}^2 + {\lambda _{ID}}\left( {1 + k_{{I_r}D}^2} \right) + 1}}, \end{aligned}$$
(6)

where \({\lambda _{{R_p}D}} = \frac{{{P_{{R_p}}}{{\left( {\sum \nolimits _{i = 1}^N {{\chi _i}{\kappa _i}} } \right) }^2}}}{{{L_{R{V_i}}}{L_{{V_i}D}}\delta _D^2}}\), \({\lambda _{ID}} = \sum \nolimits _{r = 1}^M {\frac{{{P_{{I_r}}}{{\left| {{h_{{I_r}D}}} \right| }^2}}}{{\delta _D^2}}}\)

As described before, DF forward protocol is utilized at R, thus the total SINDR of the whole network is written as

$$\begin{aligned} {\gamma _e} = \min \left( {{\gamma _{SR}},{\gamma _{RD}}} \right) . \end{aligned}$$
(7)

3 System performance evaluation

During this Section, the detailed investigations for the OP of the considered system will be given. At the very beginning, the illustration of the channel model is given.

3.1 The channel model

3.1.1 The interference link model

In the system model, we have illustrated that there are M interferes interfering the R and D. As the popular assumption, the channel model for \(\lambda _{IR_p}\) and \(\lambda _{ID}\) are considered to suffer from the Rayleigh fading, relied on [20], then the PDF for \(\lambda _Q,Q \in \left\{ {I{R_p},ID} \right\}\) is given by

$$\begin{aligned} {f_{{\lambda _Q}}}\left( x \right) = \sum \limits _{q = 1}^{\rho \left( {{A_Q}} \right) } {\sum \limits _{j = 1}^{{\tau _q}\left( {{A_Q}} \right) } {\frac{{{\mu _{q,j}}\left( {{A_Q}} \right) \bar{\lambda }_{{Q_{\left\langle q \right\rangle }}}^{ - j}}}{{\left( {j - 1} \right) !}}} } {x^{j - 1}}\exp \left( { - x/{{\bar{\lambda }}_{{Q_{\left\langle q \right\rangle }}}}} \right) , \end{aligned}$$
(8)

where \({A_Q} = diag\left( {{{\overline{\lambda }}_{{Q_1}}}, \ldots ,{{\overline{\lambda }}_{{Q_q}}}, \ldots ,{{\overline{\lambda }}_{{Q_M}}}} \right)\), \({\rho \left( {{A_Q}} \right) }\) represents the number of distinct factors of \(A_Q\), \({\overline{\lambda }_{{Q_{\left\langle 1 \right\rangle }}}}> {\overline{\lambda }_{{Q_{\left\langle 2 \right\rangle }}}}> \cdots > {\overline{\lambda }_{{Q_{\left\langle {\rho \left( {{A_Q}} \right) } \right\rangle }}}}\) depicts the ascending order of \({{{\overline{\lambda }}_{{Q_{\left\langle q \right\rangle }}}}}\), \({{\tau _q}\left( {{A_Q}} \right) }\) is the multiplicity of \({{{\overline{\lambda }}_{{Q_{\left\langle q \right\rangle }}}}}\), and \({{\mu _{q,j}}\left( {{A_Q}} \right) }\) denotes the \(\left( {q,j} \right)\)th characteristic factor of \(A_Q\) [20].

By utilizing [34], the channel mode for the self-interference link of the duplex R is given by

$$\begin{aligned} {f_{{\lambda _{R{R_p}}}}}\left( x \right) = \frac{1}{{{{\overline{\lambda }}_{R{R_p}}}}}{e^{ - \frac{x}{{{{\overline{\lambda }}_{R{R_p}}}}}}}, \end{aligned}$$
(9)

where \({\overline{\lambda }}\) denotes the channel gain.

3.1.2 The R \(\rightarrow\) D link model

By utilizing [45], the PDF for \(\lambda _{R_pD}\) can be written as

$$\begin{aligned} {f_{{\lambda _{{R_p}D}}}}\left( x \right) \simeq {e^{ - {{\left( {x - s{{\overline{\lambda }}_{{R_p}D}}} \right) }^2}/\left( {2{\delta ^2}\overline{\lambda }_{{R_p}D}^2} \right) }}/\sqrt{2\pi {\delta ^2}\overline{\lambda }_{{R_p}D}^2}, \end{aligned}$$
(10)

where \(s = N\pi /4\) and \({\delta ^2} = N\left( {1 - {\pi ^2}/16} \right)\).

Then, by utilizing some calculating steps, the cumulative distribution function (CDF) for \(\lambda _{R_pD}\) has the expression as

$$\begin{aligned} {F_{{\lambda _{{R_p}D}}}}\left( x \right) = \frac{1}{{\sqrt{2\pi {\delta ^2}\overline{\lambda }_{{R_p}D}^2} }}\left[ {\Phi \left( {A,B,C,x} \right) - \Phi \left( {A,B,C,0} \right) } \right] , \end{aligned}$$
(11)

where

$$\begin{aligned} \Phi \left( {A,B,C,x} \right) = \frac{{\sqrt{\pi /A} }}{2}\exp \left( {\frac{{{B^2} - AC}}{A}} \right) erf\left( {\sqrt{A} x + \frac{B}{{\sqrt{A} }}} \right) , \end{aligned}$$
(12)

where \(A = \frac{1}{{2{\delta ^2}\overline{\lambda }_{{R_p}D}^2}}\), \(B = \frac{{ - s}}{{2{\delta ^2}{{\overline{\lambda }}_{{R_p}D}}}}\) and \(C = \frac{{{s^2}}}{{2{\delta ^2}}}\). Besides, \(erf\left( x \right)\) depicts the error function which has been defined in [64]. By [64], \(erf\left( x \right)\) has the following expression as

$$\begin{aligned} erf\left( x \right) = \frac{1}{{\sqrt{\pi }}}{e^{ - {x^2}}}\sum \limits _{k = 0}^\infty {\frac{{{2^k}{x^{2k + 1}}}}{{\left( {2k + 1} \right) !!}}}, \end{aligned}$$
(13)

where \(\left( \cdot \right) !!\) represents the double factorial function [64].

3.1.3 The satellite transmission model

In our work, the geosynchronous Earth orbit (GEO) satelliteFootnote 4 is taken for an example. In addition, the satellite is considered to own several transmission beams. time division multiple access (TDMA) [65] is used for the GEO. \(h_{SR_p}\) can be written as

$$\begin{aligned} {h_{SR_p}} = {C_{SR_p}}{f_{SR_p}}, \end{aligned}$$
(14)

where \(f_{SR_p}\) depicts the SR issue. \(C_{SR_p}\) is the influence of the antenna pattern and the free space loss (FSL), which has the form as

$$\begin{aligned} {C_{SR_p}} = \frac{{c\sqrt{{G_{SR_p}}{G_R}} }}{{8{\pi ^2}f\sqrt{{d^2} + d_0^2} }}, \end{aligned}$$
(15)

where c is regarding as the communication speed, f represents the communication frequency. d is the distance between the satellite’s center and the UAV. Besides, \(d_0\approx 35{,}786\;{\text{km}}\), \(G_{SR_p}\) represents the gain of the UAV antenna. \(G_R\) depicts the on-board beam gain of the satellite.

From the similar method of [60], \(G_R\) has the following expression as

$$G_{R} \left( {dB} \right) \simeq \left\{ {\begin{array}{*{20}l} {\bar{G}_{{\max }} ,} \hfill & {{\text{for}}\;~0^{^\circ } < \vartheta < 1^{^\circ } } \hfill \\ {32 - 25\;\log \vartheta ,} \hfill & {{\text{for}}\;1^{^\circ } < \vartheta < 48^{^\circ } } \hfill \\ { - {\text{10,}}} \hfill & {{\text{for}}\;48^{^\circ } < \vartheta \le 180^{^\circ } ,} \hfill \\ \end{array} } \right.$$
(16)

where \({\overline{G} _{\max }}\) denotes the maximal value of the beam gain. \(\vartheta\) depicts the angle of the off-boresight. By investigating \(G_{SR_p}\), \(\theta _k\) is assumed as the angle of the transmission. \(\bar{\theta }_k\) is expressed as the 3 dB angle. By considering all of these factors, \(G_{SR_p}\) can be re-written as [18, 60]

$$\begin{aligned} {G_{SR_p}} \simeq {G_{\max }}\left( {\frac{{{K_1}\left( {{u_k}} \right) }}{{2{u_k}}} + 36\frac{{{K_3}\left( {{u_k}} \right) }}{{u_k^3}}} \right) , \end{aligned}$$
(17)

where \(G_{max}\) depicts the largest value of the beam gain. Besides, \({u_k} = 2.07123\sin {\theta _k}/\sin {\overline{\theta }_k}\), \(K_3\) and \(K_1\) represents the 1st-kind bessel function of order 3 and order 1, respectively. In order to get the best beam gain, \({\theta _k}\) is set as 0 value, which can results into the fact that \({G_{SR_p}} \approx {G_{\max }}\). Based on these considerations, \({h_{SR_p}} = C_{SR_p}^{\max }{f_{SR_p}}\) can be gotten.

By considering the \(f_{SR_p}\), a widely utilized fading model is provided in [66], which has been the popular assumption for the land mobile satellite (LMS) communication [18]. In [60], \(f_{SR_p}\) has the expression as \({f_{SR_p}} = {\overline{f} _{SR_p}} + {\widetilde{f}_{SR_p}}\), where \({\widetilde{f}_{SR_p}}\) has the consideration as i.i.d Rayleigh fading distribution. In addition, \({\overline{f} _{SR_p}}\) represents the factor of line-of-sight (LoS) component which has the fading as i.i.d Nakagami-m shadowing.

Moreover, the PDF of \({\lambda _{SR_p}} = {\overline{\lambda }_{SR_p}}\left| {C_{SR_p}^{\max }{f_{SR_p}}} \right|\) is derived as

$$\begin{aligned} {f_{{\lambda _{SR_p}}}}\left( x \right) = \sum \limits _{{k_1} = 0}^{{m_{SR_p}} - 1} {\frac{{{\alpha _{SR_p}}{{\left( {1 - {m_{SR_p}}} \right) }_{{k_1}}}{{\left( { - {\delta _{SR_p}}} \right) }^{{k_1}}}{x^{{k_1}}}}}{{{{\left( {{k_1}!} \right) }^2}\overline{\lambda }_{SR_p}^{{k_1} + 1}\exp \left( {{\Delta _{SR_p}}x} \right) }}}, \end{aligned}$$
(18)

where \({\overline{\lambda }_{SR_p}}\) denotes the average SNR between the satellite and UAV. \({\Delta _{SR_p}} = \frac{{{\beta _{SR_p}} - {\sigma _{SR_p}}}}{{{{\overline{\lambda }}_{SR_p}}}}\), \({\alpha _{SR_p}} = {\left( {\frac{{2{b_{SR_p}}{m_{SR_p}}}}{{2{b_{SR_p}}{m_{SR_p}} + {\Omega _{SR_p}}}}} \right) ^{{m_{SR_p}}}}/2{b_{SR_p}}\), \({\delta _{SR_p}} = \frac{{{\Omega _{SR_p}}}}{{\left( {2{b_{SR_p}}{m_{SR_p}} + {\Omega _{SR_p}}} \right) 2{b_{SR_p}}}}\), \({\beta _{SR_p}} = 1/2{b_{SR_p}}\), where \(m_{SR_p} \ge 0\), \(2b_{SR_p}\) and \({\Omega _{SR_p}}\) are t the channel factors with the definition as the fading severity parameter, the multipath’s component’s power and the LoS element’s average power. From the popular consideration, \(m_{SR_p}\) is regarded as an integer in this paper [22]. When \(m_{SR_p} \rightarrow \infty\), the shadowed-Rician channel will be reduced to the Rician fading. At last, \({\left( \cdot \right) _{{k_1}}}\) represents the Pochhammer symbol [64].

By utilizing (18) and the help of [21], the CDF of \(\lambda _{SR_p}\) has been shown as

$$\begin{aligned} {F_{{\lambda _{SR_p}}}}\left( x \right) = 1 - \sum \limits _{{k_1} = 0}^{{m_{SR_p}} - 1} {\sum \limits _{t = 0}^{{k_1}} {\frac{{{\alpha _{SR_p}}{{\left( {1 - {m_{SR_p}}} \right) }_{{k_1}}}{{\left( { - {\delta _{SR_p}}} \right) }^{{k_1}}}{x^t}}}{{{k_1}!{t!}\overline{\lambda }_{SR_p}^{{k_1} + 1}\Delta _{SR_p}^{{k_1} - t + 1}\exp \left( {{\Delta _{SR_p}}x} \right) }}} }. \end{aligned}$$
(19)

3.2 The OP

By utilizing [60], the OP is defined as

$$\begin{aligned} {P_{out}}\left( {{\gamma _0}} \right) = \Pr \left( {{\gamma _e} \le {\gamma _0}} \right) . \end{aligned}$$
(20)

With the help of (7), (20) can be re-given as

$$\begin{aligned} {P_{out}}\left( {{\gamma _0}} \right)&= \Pr \left[ {\min \left( {{\gamma _{SR}},{\gamma _{RD}}} \right) \le {\gamma _0}} \right] \nonumber \\& \quad = \Pr \left( {{\gamma _{SR}} \le {\gamma _0}} \right) + \Pr \left( {{\gamma _{RD}} \le {\gamma _0}} \right) - \Pr \left( {{\gamma _{SR}} \le {\gamma _0}} \right) \Pr \left( {{\gamma _{RD}} \le {\gamma _0}} \right) . \end{aligned}$$
(21)

The accurate expression for OP will be given in Theorem 1.

Theorem 1

The closed-form expression for OP of the considered system is given by

$$\begin{aligned}{P_{out}}\left( {{\gamma _0}} \right) &= 1 - \sum \limits _{l = 1}^P {{{\left( { - 1} \right) }^{l + 1}{P \atopwithdelims ()l}}}\nonumber \\& \quad \times \left[ {\sum \limits _{{k_1} = 0}^{{m_{S{R_p}}} - 1} {\sum \limits _{t = 0}^{{k_1}} {\frac{{{\alpha _{S{R_p}}}{{\left( {1 - {m_{S{R_p}}}} \right) }_{{k_1}}}{{\left( { - {\delta _{S{R_p}}}} \right) }^{{k_1}}}{e^{ - {\Delta _{S{R_p}}}C}}}}{{{k_1}!t!\bar{\lambda }_{S{R_p}}^{{k_1} + 1}\Delta _{S{R_p}}^{{k_1} - t + 1}{{\bar{\lambda }}_{R{R_p}}}}}} } } \right. \nonumber \\& \quad \times \sum \limits _{i = 1}^{\rho \left( {{A_{I{R_p}}}} \right) } {\sum \limits _{j = 1}^{{\tau _i}\left( {{A_{I{R_p}}}} \right) } {\sum \limits _{s = 0}^t {\sum \limits _{v = 0}^{t - s} {\frac{{{t \atopwithdelims ()s}{t-s \atopwithdelims ()v}A_1^s{C^{t - s - v}}{B^v}{\mu _{i,j}}\left( {{A_{I{R_p}}}} \right) }}{{\left( {j - 1} \right) !\bar{\lambda }_{I{R_p}_{\left\langle i \right\rangle }}^j}}} } } } \nonumber \\& \quad {\left. { \times \frac{{s!\left( {v + j - 1} \right) !}}{{{{\left( {{\Delta _{S{R_p}}}{A_1} + 1/{{\bar{\lambda }}_{R{R_p}}}} \right) }^{s + 1}}{{\left( {{\Delta _{S{R_p}}}B + \bar{\lambda }_{I{R_p}_{\left\langle i \right\rangle }}^{ - 1}} \right) }^{v + j}}}}} \right] ^l}\nonumber \\& \quad + \sum \limits _{l = 1}^P {\frac{{{P \atopwithdelims ()l}}}{{{{\left( { - 1} \right) }^{ - l - 1}}}}} \left[ {\sum \limits _{{k_1} = 0}^{{m_{S{R_p}}} - 1} {\sum \limits _{t = 0}^{{k_1}} {\frac{{{\alpha _{S{R_p}}}{{\left( {1 - {m_{S{R_p}}}} \right) }_{{k_1}}}{{\left( { - {\delta _{S{R_p}}}} \right) }^{{k_1}}}}}{{{k_1}!t!\bar{\lambda }_{S{R_p}}^{{k_1} + 1}\Delta _{S{R_p}}^{{k_1} - t + 1}{{\bar{\lambda }}_{R{R_p}}}{e^{{\Delta _{S{R_p}}}C}}}}} } } \right. \nonumber \\& \quad \times \sum \limits _{i = 1}^{\rho \left( {{A_{I{R_p}}}} \right) } {\sum \limits _{j = 1}^{{\tau _i}\left( {{A_{I{R_p}}}} \right) } {\sum \limits _{s = 0}^t {\sum \limits _{v = 0}^{t - s} {\frac{{{t \atopwithdelims ()s}{t-s \atopwithdelims ()v}A_1^s{C^{t - s - v}}{B^v}{\mu _{i,j}}\left( {{A_{I{R_p}}}} \right) }}{{\left( {j - 1} \right) !\bar{\lambda }_{I{R_p}_{\left\langle i \right\rangle }}^j}}} } } } \nonumber \\& \quad {\left. { \times \frac{{s!\left( {v + j - 1} \right) !}}{{{{\left( {{\Delta _{S{R_p}}}{A_1} + 1/{{\bar{\lambda }}_{R{R_p}}}} \right) }^{s + 1}}{{\left( {{\Delta _{S{R_p}}}B + \bar{\lambda }_{I{R_p}_{\left\langle i \right\rangle }}^{ - 1}} \right) }^{v + j}}}}} \right] ^l}\nonumber \\& \quad \times \left[ {\frac{{erf\left( {s/\sqrt{2{\delta ^2}\overline{\lambda }_{{R_p}D}^2} } \right) }}{2} + \sum \limits _{q = 1}^{\rho \left( {{A_{ID}}} \right) } {\sum \limits _{j = 1}^{{\tau _q}\left( {{A_{ID}}} \right) } {\frac{{{\mu _{q,j}}\left( {{A_{ID}}} \right) \bar{\lambda }_{I{D_{\left\langle q \right\rangle }}}^{ - j}}}{{\left( {j - 1} \right) !\sqrt{\pi }}}} } } \right. \nonumber \\& \quad \left. { \times \sum \limits _{n = 0}^\infty {\sum \limits _{r = 0}^{2n + 1} {\left( {2n+1 \atopwithdelims ()r} \right) \frac{{{{\left( { - 1} \right) }^n}{F^{2n + 1 - r}}{E^r}\left( {j - 1 + r} \right) !}}{{n!\left( {2n + 1} \right) \bar{\lambda }_{I{D_{\left\langle q \right\rangle }}}^{ - j - r}}}} } } \right] , \end{aligned}$$
(22)

where \({A_1} = \frac{{\left( {1 + k_{R{R_p}}^2} \right) {\gamma _0}}}{{1 - k_S^2{\gamma _0}}}\), \(B = \frac{{\left( {1 + k_{{I_r}{R_p}}^2} \right) {\gamma _0}}}{{1 - k_S^2{\gamma _0}}}\), \(C = \frac{{{\gamma _0}}}{{1 - k_S^2{\gamma _0}}}\), \(E = \frac{{\left( {1 + k_{{I_r}D}^2} \right) {\gamma _0}}}{{\left( {1 - k_{{R_p}D}^2{\gamma _0}} \right) }}/\sqrt{2{\delta ^2}\overline{\lambda }_{{R_p}D}^2}\) and \(F = \left[ {\frac{{{\gamma _0}}}{{1 - k_{{R_p}D}^2{\gamma _0}}} - s} \right] /\sqrt{2{\delta ^2}\overline{\lambda }_{{R_p}D}^2}\).

Proof

The detailed step can be seen in “Appendix 1”. \(\square\)

4 The asymptotic OP

To derive further investigations of the major issues on the OP, the approximate analysis for the OP can be obtained in the following analysis. When \(\bar{\gamma }_{SR_p} \rightarrow \infty\) and \(\bar{\gamma }_{R_pD} \rightarrow \infty\), (19) and (11) has the expression as

$$\begin{aligned}&{F_{{\lambda _{S{R_p}}}}}\left( x \right) = \frac{{{\alpha _{S{R_p}}}}}{{{{\bar{\lambda }}_{S{R_p}}}}}x + o\left( x \right) , \end{aligned}$$
(23)
$$\begin{aligned}&{F_{{\lambda _{{R_p}D}}}}\left( x \right) = \frac{{x{e^{ - \frac{{{s^2}}}{{2{\delta ^2}}}}}}}{{\sqrt{2\pi {\delta ^2}\overline{\lambda }_{{R_p}D}^2} }} + o\left( x \right) , \end{aligned}$$
(24)

where \(o\left( x \right)\) represents the higher order of x.

The asymptotic analysis for OP is given in Theorem 2.

Theorem 2

The asymptotic expression for OP of the considered network is obtained as

$$\begin{aligned}P_{out}^\infty \left( {{\gamma _0}} \right) &= \frac{{{e^{ - \frac{{{s^2}}}{{2{\delta ^2}}}}}}}{{\sqrt{2\pi {\delta ^2}\overline{\lambda }_{{R_p}D}^2} }}\left[ {\sum \limits _{q = 1}^{\rho \left( {{A_{ID}}} \right) } {\sum \limits _{j = 1}^{{\tau _q}\left( {{A_{ID}}} \right) } {\frac{{{\mu _{q,j}}\left( {{A_{ID}}} \right) \bar{\lambda }_{I{D_{\left\langle q \right\rangle }}}^{ - j}L}}{{\left( {j - 1} \right) !\sqrt{\pi }}}} + C} } \right] \nonumber \\& \quad + {\left[ {\frac{{{\alpha _{S{R_p}}}}}{{{{\bar{\lambda }}_{S{R_p}}}}}\left( {C + {A_1}{{\bar{\lambda }}_{R{R_p}}}\left. { + B\sum \limits _{i = 1}^{\rho \left( {{A_{I{R_p}}}} \right) } {\sum \limits _{j = 1}^{{\tau _i}\left( {{A_{I{R_p}}}} \right) } {{\mu _{i,j}}\left( {{A_{I{R_p}}}} \right) j{{\bar{\lambda }}_{I{R_p}_{\left\langle i \right\rangle }}}} } } \right) } \right. } \right] ^P}. \end{aligned}$$
(25)

Proof

The detailed proof will be given in “Appendix 2”. \(\square\)

5 Numerical results

Some representative MC figures are shown to investigate the correctness of the theoretical results. Channel and system parameters are provided in Table 1 [2] and Table 2 [18], respectively. Besides, \(L_{RV_i} = L_{V_iD} = L = 20\) is assumed. In addition, \(\bar{\lambda }_{SR_p} = \bar{\lambda }_{R_pD} = \bar{\gamma }\), \(k_S = k_{I_rR_p} = k_{R_pD} = k_{I_rD} = k\), \(\delta _{R_p}^2 = \delta _{D}^2 = \delta ^2 = 1\), \(\bar{\lambda }_{I_rR_p} = \bar{\lambda }_{I_rD} = \bar{\gamma }_{I}\), and \(\bar{\gamma }_{RR_p} = \bar{\gamma }_{RR}\). By utilizing the infinite series function, when \(N=2\), 10 terms are acceptable; when \(N=10\), 30 terms are needed to gain the suitable performance.

Table 1 Channel parameters
Table 2 System parameters

Figure 2 examines the OP versus \(\bar{\gamma }\) for some shadow fading and IH level with \(\bar{\gamma }_I\) = 5 dB, \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\), \(P=3\) and \(N=5\). Firstly, we can find that the simulation results are nearly the same with the theoretical results which verify the rightness of our analysis. Moreover, at high SNRs, the asymptotic results are the tight across the simulation results, which also proves the rightness of our analytical investigations. In addition, it can be found that when the channel is under light fading, the OP will be smaller. At last, if the system suffers light IH, the OP will be smaller, too.

Fig. 2
figure 2

OP versus \(\bar{\gamma }\) for different shadow fading and IH level with \(\bar{\gamma }_I\) =5 dB, \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\), \(P=3\) and \(N=5\)

Figure 3 illustrates the OP versus \(\bar{\gamma }\) for some P and IH level with \(\bar{\gamma }_I\) =5 dB, \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\) and \(N=5\) in FHS scenario. From Fig. 3, the same insights with the theoretical results, P has a serious impact on the OP, and the diversity order is the function of P. When P is smaller, the OP will be higher.

Fig. 3
figure 3

OP versus \(\bar{\gamma }\) for different P and IH level with \(\bar{\gamma }_I\) = 5 dB, \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\) and \(N=5\) in FHS scenario

Figure 4 examines the OP versus \(\bar{\gamma }\) for some N and IH level with \(\bar{\gamma }_I\) = 5 dB, \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\) and \(P=1\) in FHS scenario. From Fig. 4, it can be seen that the N has an influence on the OP. When N is smaller, the OP will be higher. However, it is a conclusion that gap between the curves with different N is small for the reason that the satellite transmission link is the major decision of the OP performance. which leads to results of these curves. From Fig. 4, we can see that these curves are relatively closely spaced, which indicate that the RIS transmission link is not the decision link.

Fig. 4
figure 4

OP versus \(\bar{\gamma }\) for different N and IH level with \(\bar{\gamma }_I\) = 5 dB, \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\) and \(P=1\) in FHS scenario

Figure 5 introduces the OP versus \(\bar{\gamma }\) for some \(\bar{\gamma }_I\) and IH level with \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\), \(N=5\), and \(P=3\) in FHS scenario. From Fig. 5, we could know that when interference’s power become smaller, the OP will be lower. Besides, we can observe that these curves with different \(\bar{\gamma }_I\) are parallel for the reason that the diversity order is the same.

Fig. 5
figure 5

OP versus \(\bar{\gamma }\) for different \(\bar{\gamma }_I\) and IH level with \(\gamma _0=1\) dB, \(\bar{\gamma }_{RR}=10\) dB, \(M=3\), \(N=5\), and \(P=3\) in FHS scenario

Figure 6 shows the OP versus \(\bar{\gamma }\) for some \(\bar{\gamma }_{RR}\) and IH level with \(\gamma _0=1\) dB, \(\bar{\gamma }_{I}=3\) dB, \(M=3\), \(N=2\), and \(P=3\) in FHS scenario. Moreover, we can find that when \(\bar{\gamma }_{RR}\) is becoming larger, the OP will be larger. In addition, we see that in high SNR regime, these curves has the trend that they have the same OP, which is the inherent character of the NI system.

Fig. 6
figure 6

OP versus \(\bar{\gamma }\) for different \(\bar{\gamma }_{RR}\) and IH level with \(\gamma _0=1\) dB, \(\bar{\gamma }_{I}=3\) dB, \(M=3\), \(N=2\), and \(P=3\) in FHS scenario

Figure 7 plots the OP versus \(\bar{\gamma }\) for some \(\gamma _{0}\) and IH level with \(\bar{\gamma }_{RR}=5\) dB, \(\bar{\gamma }_{I}=5\) dB, \(M=3\), \(N=2\), and \(P=3\) in AS scenario. From Fig. 7, it has the scenario that with \(\gamma _0\) becoming larger, the OP will be larger, too. This is because that the outage threshold is getting larger, which indicates that the system needs larger power to keep the transmission.

Fig. 7
figure 7

OP versus \(\bar{\gamma }\) for different \(\gamma _{0}\) and IH level with \(\bar{\gamma }_{RR}=5\) dB, \(\bar{\gamma }_{I}=5\) dB, \(M=3\), \(N=2\), and \(P=3\) in AS scenario

Figure 8 illustrates the OP versus \(\gamma _{0}\) for some P and IH level with \(\bar{\gamma }=20\) dB, \(\bar{\gamma }_{RR}=5\) dB, \(\bar{\gamma }_{I}=5\) dB, \(M=3\) and \(N=2\) in FHS scenario. Form Fig. 8, it can be found that when \(\bar{\gamma }_0\) is larger than a fixed value, the OP will be always 1, and this fixed values has not influence with the P. When the NI level is lager, this fixed value is smaller. This is the inherent character of the IH system.

Fig. 8
figure 8

OP versus \(\gamma _{0}\) for different P and IH level with \(\bar{\gamma }=20\) dB, \(\bar{\gamma }_{RR}=5\) dB, \(\bar{\gamma }_{I}=5\) dB, \(M=3\) and \(N=2\) in FHS scenario

6 Conclusion

Through this work, we researched the OP for the RIS-aided ISDURTNs. To gain the balance between the performance and complexity, partial UAV selection scheme was utilized in the considered network. Particularly, the accurate expression for the OP was gotten, which has given an efficient way to verify the impacts of major parameters on the OP. In addition, the asymptotic analysis for the OP was further studied in high SNR regime. From the simulation results, it could be derived that the light channel fading, the larger N, the weaker IH level and the less interference power would lead to a lower OP, which guide the future engineering design.