Abstract
Singlecell RNAseq data allows insight into normal cellular function and various disease states through molecular characterization of gene expression on the single cell level. Dimensionality reduction of such highdimensional data sets is essential for visualization and analysis, but singlecell RNAseq data are challenging for classical dimensionalityreduction methods because of the prevalence of dropout events, which lead to zeroinflated data. Here, we develop a dimensionalityreduction method, (Z)ero (I)nflated (F)actor (A)nalysis (ZIFA), which explicitly models the dropout characteristics, and show that it improves modeling accuracy on simulated and biological data sets.
Similar content being viewed by others
Introduction
Singlecell RNA expression analysis (scRNAseq) is revolutionizing wholeorganism science [1, 2] allowing the unbiased identification of previously uncharacterized molecular heterogeneity at the cellular level. Statistical analysis of singlecell gene expression profiles can highlight putative cellular subtypes, delineating subgroups of T cells [3], lung cells [4] and myoblasts [5]. These subgroups can be clinically relevant: for example, individual brain tumors contain cells from multiple types of brain cancers, and greater tumor heterogeneity is associated with worse prognosis [6].
Despite the success of early singlecell studies, the statistical tools that have been applied to date are largely generic, rarely taking into account the particular structural features of singlecell expression data. In particular, singlecell gene expression data contain an abundance of dropout events that lead to zero expression measurements. These dropout events may be the result of technical sampling effects (due to low transcript numbers) or real biology arising from stochastic transcriptional activity (Fig. 1 a). Previous work has been undertaken to account for dropouts in univariate analysis, such as differential expression analysis, using mixture modeling [7, 8]. However, approaches for multivariate problems, including dimensionality reduction, have not yet been considered. As a consequence, it has not been possible to ascertain fully the ramifications of applying dimensionalityreduction techniques, such as principal components analysis (PCA), to zeroinflated data.
Dimensionality reduction is a universal dataprocessing step in highdimensional gene expression analysis. It involves projecting data points from the very highdimensional gene expression measurement space to a lowdimensional latent space reducing the analytical problem from a simultaneous examination of tens of thousands of individual genes to a much smaller number of (weighted) collections that exploit gene coexpression patterns. In the lowdimensional latent space, it is hoped that patterns or connections between data points that are hard or impossible to identify in the highdimensional space will be easy to visualize.
The most frequently used technique is PCA, which identifies the directions of largest variance (principal components) and uses a linear transformation of the data into a latent space spanned by these principal components. The transformation is linear as the coordinates of the data points in the lowdimensional latent space are a weighted sum of the coordinates in the original highdimensional space and no nonlinear transformations are used. Other linear techniques include factor analysis (FA), which is similar to PCA but focuses on modeling correlations rather than covariances. Many nonlinear dimensionality techniques are also available but linear methods are often used in an initial step in any dimensionalityreduction processing since nonlinear techniques are typically more computationally complex and do not scale well to simultaneously handling many thousands of genes and samples.
In this article, we focus on the impact of dropout events on the output of dimensionalityreduction algorithms (principally linear approaches) and propose a novel extension of the framework of probabilistic principal components analysis (PPCA) [9] or FA to account for these events. We show that the performance of standard dimensionalityreduction algorithms on highdimensional singlecell expression data can be perturbed by the presence of zeroinflation making them suboptimal. We present a new dimensionalityreduction model, zeroinflated factor analysis (ZIFA), to account explicitly for the presence of dropouts. We demonstrate that ZIFA outperforms other methods on simulated data and singlecell data from recent scRNAseq studies.
The fundamental empirical observation that underlies the zeroinflation model in ZIFA is that the dropout rate for a gene depends on the expected expression level of that gene in the population. Genes with lower expression magnitude are more likely to be affected by dropout than genes that are expressed with greater magnitude. In particular, if the mean level of nonzero expression (log read count) is given by μ and the dropout rate for that gene by p _{0}, we have found that this dropout relationship can be approximately modeled with a parametric form p _{0}= exp(−λ μ ^{2}), where λ is a fitted parameter, based on a double exponential function. This relationship is consistent with previous investigations [7] and holds in many existing singlecell data sets (Fig. 1 b), including a data set with unique molecular identifiers [10] (Additional file 1: Figure S1). The use of this parametric form permits fast, tractable linear algebra computations in ZIFA enabling its use on realistically sized data sets in a multivariate setting.
Method
Overview
ZIFA adopts a latent variable model based on the FA framework and augments it with an additional zeroinflation modulation layer. Like FA, the data generation process assumes that the separable cell states or subtypes initially exist as points in a latent (unobserved) lowdimensional space. These are then projected onto points in a latent highdimensional gene expression space via a linear transformation and the addition of Gaussiandistributed measurement noise. Each measurement then has some probability of being set to zero via the dropout model that modulates the latent distribution of expression values. This allows us to account for observed zeroinflated singlecell gene expression data (Fig. 1 c). The scaling parameter in the dropout model can allow for a large range of dropoutexpression profiles (Fig. 1 d).
In the following, we provide a more detailed mathematical treatment of the proposed zeroinflated factor analysis model, although we leave a complete exposition for Additional file 1. A Pythonbased software implementation and source code are made freely available online via an MIT License: https://github.com/epierson9/ZIFA.
Statistical model
Let N be the number of samples, D be the number of genes and K be the desired number of latent dimensions. The data are given by a highdimensional N×D data matrix Y= [y _{1},…,y _{ N }], where y _{ ij } is the level of expression (log read count) of the jth gene in the ith sample. The data are assumed to be generated from a projection of a latent lowdimensional N×K matrix Z= [z _{1},…,z _{ N }] (K≪D). In all derivations below, we use use i=1,…,N to index over samples (cells), j=1,…,D to index over genes and k=1,…,K to index over latent dimensions. Each sample y _{ i } is drawn independently:
where I denotes the K×K identity matrix, A denotes a D×K factor loadings matrix, H is a D×N masking matrix, \(\textbf {W} = \text {diag}\left ({\sigma _{1}^{2}}, \dots, {\sigma _{D}^{2}}\right)\) is a D×D diagonal matrix and μ is a D×1 mean vector. We choose the dropout probability to be a function of the latent expression level, \(p_{0} = \text {exp}\left (\lambda x_{\textit {ij}}^{2}\right)\), where λ is the exponential decay parameter in the zeroinflation model. Note that λ is shared across genes, which reduces the number of parameters to be estimated and captures that technical noise should have similar effects across genes.
Statistical inference
Given an observed singlecell gene expression matrix Y, we wish to identify model parameters Θ=(A,σ ^{2},μ,λ) that maximize the likelihood p(Yθ). We do this using the expectationmaximization (EM) algorithm. We summarize the algorithm in the box below and then describe the algebraic details:
We denote the value of the parameters at the nth iteration, Θ _{ n }, as the value that maximizes the expected value of the complete log likelihood p(Z,X,H,Y) under the conditional distribution over the latent variables given the observed data and the parameters at the last iteration. Computing the value of the parameters at each iteration requires two steps: the expectation step (Estep) and the maximization step (Mstep). In the Estep, we derive an expression for the complete log likelihood p(Z,X,H,YΘ _{ n }) and compute all necessary expectations under the distribution p(Z,X,HY,Θ _{ n−1}). The approximate zeroinflation model that we adopt admits closed form expressions for the expectations allowing the algorithm to be applied to realistically sized data sets. In the Mstep, we maximize the expected value of the complete log likelihood with respect to Θ _{ n }.
The EM algorithm structurally resembles the equivalent algorithm for FA that iterates between imputing the coordinates of the observed data points in the lowdimensional latent space (Estep) and optimizing model parameters (Mstep). In ZIFA, the expectation step incorporates a data imputation stage to compute the expected gene expression levels for genes/cells with observed null values. Note that if the noise measurement variances attributed to each gene are identical, we obtain a zeroinflated version of the probabilistic PCA algorithm [9] (ZIPPCA).
Fast approximation for whole transcriptome analysis
The EM algorithm requires computations involving conditional expectations of multivariate Gaussian distributions. For each cell, information from nonzero measurements is used to impute the expected expression levels for genes with zero measured values jointly. If all available expressed genes are used for this imputation process, the exact computations would necessitate large computationally intensive matrix multiplications. In practice, we have discovered that it is not necessary to compute the expectations using all available genes at once. Substantial computational savings can be achieved by partitioning the genes into nonoverlapping disjoint sets, and then performing exact computations within each block of genes. This decreases the run time of our algorithm from quadratic to linear in the number of genes, allowing it to run on data sets with hundreds of samples and tens of thousands of genes on a standard computer. Figure 2 shows that expectations obtained via this approximate strategy closely follow those from exact calculations but can be achieved with a substantial computational speedup. Parameter estimates based on these approximate expectations are also robust (Additional file 1: Figure S2).
Table 1 details running times using our serial Python implementation for four data sets. For all data sets, we filtered out genes that were zero more than 95 % of the time except for the 11 cell populations data set, for which the algorithm did not converge unless we filtered out genes that had zeros across more than 80 % of samples. Tests were run on a standard quadcore Apple MacBook Pro laptop computer. We do not report timings for the exact version of our algorithm as these require many orders of magnitude more compute time. The computational times are not of the order of seconds, like PCA or FA, as a price must be paid for the increased expressive power of ZIFA. However, the availability of exact and approximate versions of ZIFA does allow the application of the method for data of a variety of sizes. The computational implementation of our approximate inference method can also be parallelized since the expectation calculations are independent across each cell and gene subset. We seek to implement this strategy in future versions of the software.
Results
Simulation study
We tested the relative performance of ZIFA against PCA, PPCA [9], FA and, for reference, nonlinear techniques including stochastic neighbor embedding (tSNE) [11], Isomap [12] and multidimensional scaling [13]. First, we generated simulated data sets according to the PPCA/FA data generative model with the addition of one of three dropout models: (i) a double exponential model (as assumed by ZIFA), (ii) a linear decay model and (iii) a missingatrandom uniform model. The latter two models were designed to test the robustness of ZIFA to extreme misspecification of the dropout model. Data were simulated under a range of different conditions by varying noise levels, dropout rates, number of latent dimensions and number of genes. The simulation experiment was not intended to truly reflect actual real world data characteristics but to establish, when all other modeling assumptions are true, the impact of dropout events on the outcomes of (P)PCA and FA.
Setup
We used the assumed generative model to produce simulated data. For the simulations, the values a _{ jk } were drawn from a uniform distribution U(−0.5,0.5), the diagonal elements of the covariance matrix were drawn from a uniform distribution U(0.9,1.1)σ ^{2}, where σ ^{2} is a simulation parameter, and μ _{ j } were drawn from U(2.7,3.3). We experimented with three choices of f(·): a decaying squared exponential, \(f(X_{\textit {ij}}) = \exp \left (\lambda X_{\textit {ij}}^{2}\right)\) (used in ZIFA); a linear decay function, f(X _{ ij })=1−λ X _{ ij }; and a uniform (missing at random) function for each gene j, f(X _{ ij })=1−λ _{ j }.
We used a base setting of N=150, K=10, D=50, σ ^{2}=0.3 and λ=0.1, and we explored the effects of altering the decay parameter λ, the number of latent dimensions K, the cluster spread σ ^{2}, the number of observed dimensions D and the number of samples N.
Performance metrics
As a measure of algorithm performance, we compared the true z _{ i } to the \(\hat {\mathbf {z}}_{i}\) for each sample estimated by the algorithms as follows. We computed the true distance between each pair of points j,k and defined a pairwise distance matrix F such that F _{ jk }=z _{ j }−z _{ k }_{2}. We compared this to the estimated distance matrix \(\hat F_{\textit {jk}} = \hat {\textbf {z}}_{j}  \hat {\textbf {z}}_{k}_{2}\). We scored the correspondence between the two distance matrices using the Spearman correlation. By comparing F and \(\hat F\) rather than z _{ i } and \(\hat {\textbf {z}}_{i}\), we account for the fact that dimensionalityreduction algorithms may rotate the points but ought to preserve the relative distances between them.
Outcomes
Although the data sets were generated according to a PPCA/FA model (up to the dropout stage), in the presence of cells with genes possessing zero expression, the performance of all standard dimensionalityreduction methods (even PPCA/FA) deteriorated relative to ZIFA. An example is illustrated in Fig. 3 a. Our simulation results (Fig. 3 b) indicate that standard approaches may be safely used in certain regimes but should be avoided in others. In particular, gene sets with a high degree of zeroinflation will be problematic (small λ), as the relative distances between data points in the gene expression measurement space will be distorted by the presence of zeros and hence there will be an error when projecting back into the latent space. Performance also falls if the gene set is small since there is less scope to exploit strong coexpression signatures across genes to mitigate for the presence of zeros. These regimes are important to consider in the context of linear transformation techniques (PCA, PPCA and FA) that are often applied only to curated gene sets where the linearity constraints may be approximately applicable. The application of nonlinear techniques did not cure the problems induced by dropouts.
Overall, ZIFA outperformed the standard dimensionalityreduction algorithms. This would be expected for those simulations adopting the same generative model assumed by ZIFA (Fig. 3 b) but performance was also replicated regardless of whether dropouts were added following a linear model (Additional file 1: Figure S3A), or a missingatrandom model (Additional file 1: Figure S3B). This suggests that it is better to account for dropouts somehow even if the dropout characteristics are not realistic. Interestingly, this may suggest that ZIFA could be applicable for other zeroinflated multivariate data sets. Additional file 1: Figure S4 also shows performance measured in terms of sumofsquared error rather than Spearman correlation.
ZIFA should, therefore, be considered a safe alternative in that it converges in performance to PPCA/FA in the largedata lownoise limit but is robust to dropout events that might distort the outcomes of these methods in nonideal situations.
Singlecell data modeling
We next sought to test these methods in an experiment based on real singlecell expression data sets [3, 5, 6, 14]. In this case, the true latent space is unknown and we are unable to measure performance as with the previous simulated data experiment. Instead, for each of the data sets, we took random subsets of 25, 100, 250 and 1000 genes and applied ZIFA, PPCA and FA to each subset assuming five latent dimensions.
For each gene j, we compared the posterior predictive distribution \(\hat Y_{j}\) of the distribution of read counts from each method to the observed distribution Y _{ j } as follows: (1) we computed the proportion of values in Y _{ j } and \(\hat Y_{j}\) that fell into 30 discrete intervals, (2) we then computed the difference between the histograms Δ _{ j }. If h _{ n } is the proportion of values in bin n for the true distribution, and \(\hat h_{n}\) for the predicted distribution, then the histogram divergence is given by
We computed the fraction of genes for which the Δ _{ j } from ZIFA was less than Δ _{ j } from PPCA and FA. To prevent overfitting, we assessed the fit on a test set: we fitted the model for each data set on a training set containing 70 % of the data points, and computed the difference between the histograms on the remaining 30 % of data points.
Note that it is not possible to do this comparison with standard PCA or other dimensionality methods, such as tSNE, since these are not based on a probabilistic generative model framework and therefore, it is not possible to derive the posterior predictive distributions that we use for performance comparisons.
Using this criterion, we found that predictive distributions from PPCA and FA showed high divergence for genes that exhibited a high dropout rate or possessed a low nonzero expression level. This meant that the predictive data distributions were a poor fit for the empirical data. The performance of ZIFA was largely unaffected in contrast (Fig. 3 c). Example predictive model fits are shown for the Tcell data set [3] for three genes: Plscr3, Ulk2 and Ncrna00085 (Fig. 3 c).
The statistical frameworks underlying PPCA and FA employ Gaussianity assumptions that are unable to account explicitly for zeroinflation in singlecell expression data. The dropout model used by ZIFA modulates this Gaussianity assumption allowing for zeroinflation leading to drastically improved modeling accuracy. Across the four data sets, we found that the predictive distribution derived by ZIFA was superior to those of PPCA and FA on at least 80 % of the genes examined and often over 95 % (Table 2).
We further assessed whether the lowdimensional projections by ZIFA were more consistent than those of PPCA. For the four data sets, we repeated the following procedure 100 times: we sampled 100 genes at random, ran ZIFA or PPCA, and computed the pairwise distances between points in the lowdimensional space. This yielded 100 distance matrices, one for each iterate. We computed the Spearman correlation between each pair of distance matrices (for a total of 100×99/2 correlations) and recorded the average Spearman correlation for both ZIFA and PPCA. Figure 4 shows the distribution of the Spearman correlations for ZIFA and PPCA on the four data sets. Overall, the distance matrices produced by ZIFA were more correlated with each other than those produced by PPCA, indicating that the ZIFA distance matrices are more consistent across random iterates as ZIFA’s performance is less dependent on the number of dropout events present in the data.
Cell type separability
We now address the utility of ZIFA for a common analytical problem in singlecell expression analysis: the identification of distinct cellular subtypes or states. Typically, this occurs by reducing the highdimensional gene expression measurements to a lowdimensional representation (often with PCA). The data are then clustered in this lowdimensional space to identify groups of cells exhibiting similar expression behaviors. Similarity is usually defined in terms of the relative positions of the cells in this lowdimensional space: cells that are close together are more likely to be of the same subtype, whilst cells that are far apart are more likely to be of different types.
We speculated that dropout events may distort the relative positions of cells in the lowdimensional subspace potentially leading to misclassification of cell types. To test this, we utilized singlecell data from two recent studies [15, 16] where the cell type identities had been established and could be used as ground truth in a simulation study. We applied PCA and ZIFA to 30 gene subsets of size 500 that were randomly sampled from each data set and projected the data from an initial 500 dimensions to 10 dimensions. We then trained classifiers, using linear and quadratic discriminant analysis (LDA/QDA), and computed the classification error rate of the classifiers. If the cell types are separated well in the latent space, then it would be possible to construct decision boundaries to segregate the classes perfectly and achieve zero classification error on the training data. If cell type classes overlap, it will not be possible to construct classifiers that will separate all cells into their respective groups. The greater the overlap, the greater the rate of misclassification. We treated these misclassification errors as measures of cell type separability.
Figure 5 shows that dimensionality reduction using ZIFA led to lower classification error rates than PCA on the Usoskin data [16] indicating that, by taking into account dropout events, ZIFA was able to separate cell types better than PCA. For the Pollen data set, PCA showed better performance than ZIFA when classification error was measured based on an LDA classifier but equal performance when using QDA. It should be noted that overall absolute classification errors for the Pollen data [15] were extremely low (0–2 % using QDA). This is unsurprising as the cell types in this study were derived from a number of unrelated cell lines. Therefore, a comparison of the performance of PCA and ZIFA for this data may not necessarily reflect most experimental conditions. In contrast, the four cell types we considered in the Usoskin data are all neuronal cells.
The previous simulation study was limited because each of the gene subsets had very similar dropout rates that were approximately 50 % and 60 %, respectively, for the Pollen and Usoskin data sets (Additional file 1: Figure S5). To understand better the relationship between the performance of PCA and ZIFA and dropout rate, we used these data sets as a scaffold upon which to construct further simulated data sets. Using simulations allows us to control the rate of dropout events. Our double exponential dropout model was used to introduce dropouts by varying the decay parameter λ used in the simulations. The simulation algorithm is detailed in Additional file 1.
Figure 6 shows the relative performance of PCA and ZIFA on the simulated data sets. As the data were simulated, we can also provide a baseline performance from classifiers built from PCA applied to the latent expression measurements with no dropout events (i.e., treating the latent measurements X as the observations instead of the zeroinflated observations Y). The results show that for low dropout rates, the performance of PCA and ZIFA converges to the baseline. However, at higher dropout rates, ZIFA proves more effective at maintaining cell type separation than PCA for both data sets. We observed from the magnitude of the absolute misclassification errors that separating the neuronal cell types in the Usoskin data is more challenging than with the cell types in the Pollen data set. Classification performance quickly declines as dropout rates increase with the Usoskin data but, even when the average dropout rate was nearly 90 %, it was still possible to achieve less than 10 % misclassification errors with the Pollen data.
In conclusion, the performance gain of ZIFA over PCA for cell type identification problems will heavily depend on the intrinsic separability of the cell subtypes and the dropout rate. Our analysis of the Pollen data suggests there is little to gain from ZIFA over PCA for cell types that are straightforward to separate and would be expected to lie far apart in latent space. However, the Usoskin results suggest there may be greater advantages from modeling dropouts when cellular expression behaviors are more similar and the positions of the cells in latent space are close.
Discussion
The density of dropout events in scRNAseq data can render classical dimensionalityreduction algorithms unsuitable and to date it has not been possible to assess the potential ramifications of applying such methods on zeroinflated data. We have modified the PPCA/FA framework to account for dropout to produce a safe method for the dimensionality reduction of singlecell gene expression data that provides robustness against such uncertainties. In the absence of dropout events, the method is essentially equivalent to PPCA/FA, and therefore, software implementations can straightforwardly substitute our approach for existing methods (e.g., Z = PCA(Y, k) to Z = ZIFA(Y, k)). Therefore, users could use ZIFA as a direct substitute with the benefit that it will automatically account for dropouts whereas remedial efforts may be required with standard PCA. Note that our methodology differs from approaches, such as the many variants of robust PCA, that aim to model corrupted observations. ZIFA treats dropouts as real observations, not outliers, whose occurrence properties have been characterized using an empirically informed statistical model.
The inclusion of a zeroinflation model gives ZIFA greater expressive power than standard PPCA/FA but increases the computational complexity. We have developed an approximate inference method for ZIFA and shown that it is possible to handle usefully larger data sets involving thousands of genes and hundreds of samples. Whilst improved approximation methods and parallelization could yield further performance gains, a particularly important factor in determining computational complexity is the selection of the gene set. Potential users should note that ZIFA attempts to impute latent expression values for zero measurements. If a gene has a very low frequency of expression and is zero across most cells, this imputation process is unlikely to yield further information and these genes are best removed before analysis to avoid redundant computations.
One of the limitations of ZIFA is that it models strictly zero measurements rather than nearzero values. It has been possible to account for nearzero values in a univariate mixture modeling framework by placing a smallvariance distribution around zero rather than a point mass [7, 8]. Achieving the same goal, in a multivariate context, requires further methodological thought and development to produce solutions that are computationally tractable with a large number of dimensions.
Finally, the ZIFA framework lies strictly in the linear transformation framework but nonlinear dimensionalityreduction approaches, such as tSNE [11], have proven to be highly effective in singlecell expression analysis. There are ongoing investigations to determine how zeroinflation can be formally accounted for with such methods. A natural direction would be to incorporate it directly in a nonlinear generative approach such as the Gaussian process latent variable model (GPLVM) [17]. ZIFA is also potentially applicable to other zeroinflated data where there is a negative correlation between the frequency with which a measurement feature is zero and its mean signal magnitude in nonzero samples.
Abbreviations
 EM:

Expectationmaximization
 FA:

Factor analysis
 PCA:

Principal components analysis
 PPCA:

Probabilistic principal components analysis
 ScRNAseq:

Singlecell RNA expression analysis
 ZIFA:

Zeroinflated factor analysis
References
Shapiro E, Biezuner T, Linnarsson S. Singlecell sequencingbased technologies will revolutionize wholeorganism science. Nat Rev Genet. 2013; 14(9):618–30.
Blainey PC, Quake SR. Dissecting genomic diversity, one cell at a time. Nat Methods. 2014; 11(1):19–21.
Buettner F, Natarajan KN, Casale FP, Proserpio V, Scialdone A, Theis FJ, et al. Computational analysis of celltocell heterogeneity in singlecell RNAsequencing data reveals hidden subpopulations of cells. Nat Biotechnol. 2015; 33(2):155–160.
Treutlein B, Brownfield DG, Wu AR, Neff NF, Mantalas GL, Espinoza FH, et al. Reconstructing lineage hierarchies of the distal lung epithelium using singlecell RNAseq. Nature. 2014; 509(7500):371–5.
Trapnell C, Cacchiarelli D, Grimsby J, Pokharel P, Li S, Morse M, et al. The dynamics and regulators of cell fate decisions are revealed by pseudotemporal ordering of single cells. Nat Biotechnol. 2014; 32(4):381–386.
Patel AP, Tirosh I, Trombetta JJ, Shalek AK, Gillespie SM, Wakimoto H, et al. Singlecell RNAseq highlights intratumoral heterogeneity in primary glioblastoma. Science. 2014; 344(6190):1396–401.
Kharchenko PV, Silberstein L, Scadden DT. Bayesian approach to singlecell differential expression analysis. Nat Methods. 2014; 11(7):740–2.
Satija R, Farrell JA, Gennert D, Schier AF, Regev A. Spatial reconstruction of singlecell gene expression data. Nat Biotechnol. 2015; 33(5):495–502.
Tipping ME, Bishop CM. J R Stat Soc: Series B (Statistical Methodology). 1999; 61(3):611–22.
Islam S, Zeisel A, Joost S, La Manno G, Zajac P, Kasper M, et al. Quantitative singlecell RNAseq with unique molecular identifiers. Nat Methods. 2014; 11(2):163–6.
Van der Maaten L, Hinton G. Visualizing data using tSNE. J Mach Learn Res. 2008; 9(2579–2605):85.
Tenenbaum JB, De Silva V, Langford JC. A global geometric framework for nonlinear dimensionality reduction. Science. 2000; 290(5500):2319–23.
Kruskal JB. Multidimensional scaling by optimizing goodness of fit to a nonmetric hypothesis. Psychometrika. 1964; 29(1):1–27.
Shalek AK, Satija R, Shuga J, Trombetta JJ, Gennert D, Lu D, et al. Singlecell RNAseq reveals dynamic paracrine control of cellular variation. Nature. 2014; 510(7505):363–369. doi:10.1038/nature13437.
Pollen AA, Nowakowski TJ, Shuga J, Wang X, Leyrat AA, Lui JH, et al. Lowcoverage singlecell mRNA sequencing reveals cellular heterogeneity and activated signaling pathways in developing cerebral cortex. Nat Biotechnol. 2014; 32(10):1053–1058.
Usoskin D, Furlan A, Islam S, Abdo H, Lönnerberg P, Lou D, et al. Unbiased classification of sensory neuron types by largescale singlecell RNA sequencing. Nat Neurosci. 2015; 18(1):145–53.
Lawrence N. Probabilistic nonlinear principal component analysis with Gaussian process latent variable models. J Mach Learn Res. 2005; 6:1783–816.
Acknowledgments
EP acknowledges support from the Rhodes Trust and thanks Nat Roth for helpful comments. CY is supported by a UK Medical Research Council New Investigator Research Grant (reference MR/L001411/1), a Wellcome Trust Core Award Grant (090532/Z/09/Z), the John Fell Oxford University Press Research Fund and the Li Ka Shing Foundation via a Oxford–Stanford Big Data in Human Health Seed Grant.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
EP and CY conceived the study and developed the algorithms. EP performed the data analysis and developed the software implementation. EP and CY wrote the manuscript. All authors read and approved the final manuscript.
Additional file
Additional file 1
Supplementary information. Supplementary figures and methods. (PDF 1710 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Pierson, E., Yau, C. ZIFA: Dimensionality reduction for zeroinflated singlecell gene expression analysis. Genome Biol 16, 241 (2015). https://doi.org/10.1186/s130590150805z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s130590150805z