Correction to: J Orthop Surg Res (2017) 12: 195. https://doi.org/10.1186/s13018-017-0700-2
In the original publication of this article [1] there was an error in one of the author names. In this publication the correct and incorrect name are indicated.
Originally the author name has been published as:
• John P. Pfail
The correct name is as followed:
• John L. Pfail
The original publication has been corrected.
Reference
Helguero CG, Mustahsan VM, Parmar S, et al. Biomechanical properties of 3D-printed bone scaffolds are improved by treatment with CRFP. J Orthop Surg Res. 2017;12:195. https://doi.org/10.1186/s13018-017-0700-2
Author information
Authors and Affiliations
Corresponding author
Additional information
The original article can be found online at https://doi.org/10.1186/s13018-017-0700-2.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Helguero, C.G., Mustahsan, V.M., Parmar, S. et al. Correction to: Biomechanical properties of 3D-printed bone scaffolds are improved by treatment with CRFP. J Orthop Surg Res 13, 37 (2018). https://doi.org/10.1186/s13018-018-0741-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s13018-018-0741-1