Abstract
Background
The study of plant phenotype by deep learning has received increased interest in recent years, which impressive progress has been made in the fields of plant breeding. Deep learning extremely relies on a large amount of training data to extract and recognize target features in the field of plant phenotype classification and recognition tasks. However, for some flower cultivars identification tasks with a huge number of cultivars, it is difficult for traditional deep learning methods to achieve better recognition results with limited sample data. Thus, a method based on metric learning for flower cultivars identification is proposed to solve this problem.
Results
We added center loss to the classification network to make inter-class samples disperse and intra-class samples compact, the script of ResNet18, ResNet50, and DenseNet121 were used for feature extraction. To evaluate the effectiveness of the proposed method, a public dataset Oxford 102 Flowers dataset and two novel datasets constructed by us are chosen. For the method of joint supervision of center loss and L2-softmax loss, the test accuracy rate is 91.88%, 97.34%, and 99.82% across three datasets, respectively. Feature distribution observed by T-distributed stochastic neighbor embedding (T-SNE) verifies the effectiveness of the method presented above.
Conclusions
An efficient metric learning method has been described for flower cultivars identification task, which not only provides high recognition rates but also makes the feature extracted from the recognition network interpretable. This study demonstrated that the proposed method provides new ideas for the application of a small amount of data in the field of identification, and has important reference significance for the flower cultivars identification research.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Background
As a popular category of plants, cultivars identification of ornamental plants is an important basis for reproduction, cultivation, application, and breeding. With the rapid development of Artificial Intelligence (AI), the study of plant phenotype has made a series of important progress [1,2,3,4,5,6,7,8] as a science of studying plant growth, performance, and composition. Image processing methods based on computer vision are increasingly applied to the study of plant phenotype. Bonnet [3] evaluating how state-of-art computer vision systems do perform in identifying plants compared to human expertise. The results show that the machine can clearly outperform beginners and inexperienced test subjects, which proves the feasibility of identifying plants based on computer vision.
Flowers with ornamental phenotype have brought a pleasing visual feast to humans due to their unique shapes, rich colors, and varied textures, which is important for flower phenotype research through computer vision. Recent studies have applied deep learning-based methods to flower recognition and made a series of important progress [9,10,11,12,13,14]. In particular, Lee [9] studied Convolutional Neural Networks (CNN) to learn unsupervised feature representations for 44 different plant species. Deep Convolutional Neural Networks (DCNN) based hybrid method is applied to flower species classification on Flower17 and Flower102 datasets in [13]. Liu [14] proposed a method of large-flowered chrysanthemum cultivar recognition. In the context of deep learning [15], at least thousands of training samples are required for each class to saturate the performance of DCNN on known classes. However, in practice, due to privacy protection restrictions, it is difficult to have a large amount of labeled samples, such as face recognition. For ornamental plants, not all angles have research value, which like the task of face recognition that a complete frontal view of people is required. Due to the limitation of the viewing angle, both tasks are difficult to obtain a large number of variable data for training. Such as chrysanthemum, only one or a few images of each cultivar is effective for further research despite numerous cultivars. Besides, due to the poor generalization ability of the classification neural network, it is difficult for the model to learn to identify new cultivars in the lack of labeled samples. On the other hand, sometimes it is difficult to label samples. Some cultivars’ phenotype changed dramatically during their flower opening process [14], if labeled as the same cultivar will cause ambiguity, as shown in Fig. 1. These problems restrict the application of deep learning in plant phenotype.
Opening process of one large-flowered chrysanthemum. Figure is from [14], with permission from the rights holder
Inspired by human rapid learning ability, a challenging machine learning field called Few-Shot Learning (FSL) emerges [16], which helps to relieve the burden of collecting large-scale supervised data. The methods of FSL are being widely applied to various research areas such as computer vision, natural language processing, audio and speech, and data analysis, etc. [17]. Early research of FSL approaches focused on the image field, the solution of image recognition tasks by FSL is that the model can learn quickly for new classes after learning a large amount of data in a certain class. Siamese Nets [18] is the first work that brings deep neural networks into FSL tasks, which consists of twin CNNs that share the same weights. By accepting a pair of samples as inputs, outputs of twin CNNs at the top layer are combined in order to output a single pairwise similarity score. Li [19] proposed an end-to-end deep architecture, Covariance Metric Networks, used in generic few-shot image classification and fine-grained few-shot image classification. The method of metric learning has been widely used in the image field.
Metric learning belongs to FSL. Through a spatial mapping approach that can be learned, an embedding space is obtained, in which all samples are converted into embedding vectors. In embedding space, the distance distribution between samples is being modeled so that similar samples are closer, and vice versa. This approach is applied in many fields, such as image retrieval, face recognition, target tracking, etc. Consequently, metric learning is suitable for the task of flower cultivars identification.
In this work, by using metric learning method, unknown chrysanthemum cultivars were identified. We trained a chrysanthemum cultivars identification system using DCNN which was to transform the image into the embedding space. A DCNN was trained as a classification task where the network learned to classify a given chrysanthemum cultivars image to its correct identity label. But different from the usual classifier training, in addition to the classification loss, it also increases the distance loss. In the embedding space, the classification loss distinguishes different classes, while the distance loss makes similar samples closer. Through the learning of the embedding space, the finally obtained embedding vector has the ability to measure, and the vector can be used for unknown chrysanthemum cultivars identification. To our knowledge, different datasets have a built-in bias, which has a certain impact on the recognition results. Thus, we evaluate the performance of the proposed methods on three datasets, a public dataset and two novel datasets constructed by us. The public dataset Oxford 102 Flowers consists of 102 flower classes, the number of images in each class between 40 and 258. Peony dataset contains 1255 images of 80 cultivars that were manually photographed in 2019. Chrysanthemum dataset contains 2520 images of 126 cultivars that were acquired by an automatic image acquisition device in 2018. The ROC curve, Top-1, and Top-5 evaluation indicators are used to evaluate the model, and the feature distribution of cultivars is visualized by T-SNE.
Methods
Chrysanthemum dataset
The image datasets of this research come from traditional Chinese large-flowered chrysanthemum cultivated by the research team of Beijing Forestry University (Beijing, China) in Dadongliu Nursery, Beijing. Cultivar naming standard is referred to Chinese Chrysanthemum Book [20]. The cultivation in our experiment belongs to single-flower cultivation, and the morphologies in these cultivars are similar. The cultivation process follows [14]. All images from chrysanthemum dataset were collected using the chrysanthemum image acquisition device. And the device and image acquisition process are the same as [14]. All the collected pictures were accurately and uniformly marked by the researchers using labelImg v1.7.0 software.
Images of 126 cultivars were gathered by automatic image acquisition device in 2018, 100 cultivars were randomly selected for training and 26 cultivars for test. In order to balance the samples, we randomly selected 20 images for each cultivar. The angles of the obtained images were consistent with the background, and some of the images were shown in Fig. 2.
According to [14], DCNN model paid substantial attention to inflorescence edge areas and disc floret areas, which were the key recognition positions. Therefore, DCNN models usually focus on the local information of the image when using deep learning to classify chrysanthemum images. SimCLR [23] has shown that focusing on the part of the image can obtain better recognition results than focusing on the overall image because the overall information of the image is more demanding than the local information. Therefore, to make the model focuses on local information by learning the embedding vector representation of a patch of an image, all the patches of the same image have similar representations, and different images have different representations. By random cropping, we expanded the number of original images by 10 times to a total of 25200 to construct the chrysanthemum dataset. Some of the images were shown in Fig. 3.
Peony dataset
Peonies were cultivated in a natural environment, the images were captured by the researchers with a digital camera under natural light in 2019. There are 80 cultivars of peonies, each of which contains 3-40 images, for a total of 1255 images. Due to the nonuniform background and the different shooting angles of these images, manual shooting is more subjective and flexible than shooting by a machine. Besides, there may be multiple peonies in one picture. Since the task of flower cultivars identification requires a complete top-view of images, and each image contains only one cultivar, the original images need to be annotated and cropped. We stored the cropped images by cultivars, checked each image manually, and screened out the images with overexposure, incomplete patterns, and poor definition to meet the requirements of the identification task. By random cropping, we expanded the number of original images by 10 times to a total of 12550. We selected 20 images for each cultivar from the augmented images randomly, removed cultivars with less than 20 images, and finally constructed a balanced dataset containing 11200 images of 56 cultivars. Some of the images were shown in Fig. 4. 80% of the images were used for training and 20% for test.
Oxford 102 flowers dataset
Oxford 102 Flowers dataset (Fig. 5) is a flower collection dataset released by the Department of Engineering Science of Oxford University in 2008 [24]. It is mainly used for image classification, consisting of 102 different classes of flowers common to the UK, each class contains 40 to 258 images. Since the flower cultivars identification task requires a complete top view of the flower, we first selected 3384 images of 80 classes of the original Oxford 102 Flowers dataset. By random cropping, we expanded the number of original images by 10 times and then randomly select 20 images for each class from the augmented images, remove classes with less than 20 images, and finally construct a balanced dataset containing 15400 images of 77 classes. Likewise, 80% of the images were used for training and 20% for test. Table 1 shows the details of the three datasets.
Devices
The models were built and trained on the Ubuntu 16.04 system, based on Intel Xeon Gold 5120 CPU and 4 NVIDIA Titan Xp 16GB GPU hardware platform. PyTorch was used for our experiments.
Metric learning method
Refer to the method of [22], we first summarize the general pipeline for training a chrysanthemum cultivars identification system using DCNN as shown in Fig. 6. The DCNN includes a feature extractor and classifier. During training, the DCNN is trained where the network learns to classify a given chrysanthemum cultivars image patch to its correct identity label, a softmax loss function is used for training the network which is given by Eq. (1)
where M is the training batch size, \({x_i}\) is the ith input chrysanthemum cultivars image patch in the batch, feature descriptor \(f({x_i})\) is the corresponding output of the feature extractor, \({y_i}\) is the corresponding class label, and W and b are the weights and bias for the last layer of the network which acts as a classifier. Feature descriptor \(f({x_i})\) is also the embedding vector using the L2-norm.
At test time, the embedding vectors \(f({x_g})\) and \(f({x_p})\) are extracted for the pair of test chrysanthemum cultivars images \({x_g}\) and \({x_p}\) respectively using the trained DCNN, and normalized to unit length. Then, a similarity score s is computed as the L2-distance or using cosine similarity, as given by Eq. (2). Due to normalized, the two results are equivalent. If the similarity score is greater than a set threshold, the chrysanthemum cultivars pairs are decided to be of the same cultivars.
To ensure that samples of the same cultivars are as close as possible during training, center loss [21] was proposed to enhance the discrimination of the deep features trained by DCNN, which can simultaneously learn a center for deep features of each class and minimize the distances between the deep features and their corresponding class centers. Center loss can efficiently pull the deep features of the same class to their centers to improve the similarity. In this paper, the total loss function includes center loss and L2-softmax loss [22], which can increase the distance between different samples while reducing the distance inside the same samples so that the learned features have better generalization and discrimination ability to improve the feature recognition ability of DCNN. The total loss function is defined as
and LS is L2-softmax loss, LC is center loss, \(\lambda\) is a scalar to balance the two loss functions, \({c_{{y_i}}} \in {\mathbb{R}^d}\) denotes the \({y_i}\) th class embedding center vector in embedding space.
A L2-softmax loss function [20] is given by Eq. (5)
where \({x_i}\) denotes the input image, \({y_i}\) denotes the corresponding class label, \(f({x_i})\) denotes the feature descriptor which is restricted by a constant value \(\alpha\). W and b are the weights and bias for the last layer of the network, the size of mini-batch and the number of classes is M and C, respectively. Fig. 7 shows the architecture of the network.
Implementation details
According to [25], ImageNet-trained CNNs are strongly biased towards recognizing textures. But for ornamental plants, color is a very important factor that must be considered. Thus, we used the script of ResNet18 [26] as a feature extractor to learn 128-D embedding instead of using pre-trained on ImageNet [27] dataset for our experiments. Besides, the script of ResNet50 and DenseNet121 were used for comparative experiments on chrysanthemum dataset.
Our model requires the fixed-size (224×224 pixel) input images, so the original images were first scaled to 256×256 pixels, and then images of 224×224 pixels were randomly cropped from the scaled images to obtain different scales and local feature images.
For chrysanthemum dataset, due to the use of the center loss, we adopt P-K sampling strategy [28] to construct mini-batch in training. The core idea is to form mini-batch by randomly sampling P classes (chrysanthemum cultivars), and then randomly sampling K images of each class (cultivar), thus resulting in a mini-batch of PK images. The DCNN was initialized by He initialization [29]. The test set consists of 26 cultivars that are different from the training set, with a total of 5200 sample pairs, 2600 pairs of positive samples, and 2600 pairs of negative samples. All positive and negative pairs were sampled randomly and performed to binary decision and 10 cross-validation. For peony dataset and Oxford 102 Flowers dataset, in terms of dataset division, we performed a random shuffling of the images in the datasets mentioned above, 80% of images were used for training and the rest for test. Others are the same as chrysanthemum.
The model supervised by L2-softmax loss and center loss trained 30 epochs in total. Using ResNet18, the training time of chrysanthemum dataset and the Oxford 102 Flowers dataset was around 3 hours and was around 2 hours for peony dataset. Using ResNet50 and DenseNet121, the training time of chrysanthemum dataset was around 3 hours and 4 hours, respectively. The Adam optimizer was used to optimize the network with the initial learning rate of 0.001, and the step-decay strategy was adopted for the learning rate adjustment. We fix the hyperparameter \(\lambda\) to 1 and \(\alpha\) to 10 in this experiment.
Evaluation
We used Top-k accuracy, which has been widely used to evaluate the DCNN model in image classification, as the evaluation criteria to evaluate our model. The network gives the most likely k classification results, the classification is considered correct if the k results include the correct class. Therefore, we applied the Top-k accuracy to our model and used the average of all images in the test set of each cultivar as the Top-1 and Top-5 accuracy. In addition, we used the receiver operating characteristic (ROC) curve which is commonly used to analyze results for binary decision problems and the area under the ROC curve (AUC) as the evaluation metrics.
T-Distributed Stochastic Neighbor Embedding (T-SNE) is a technique for dimensionality reduction that is particularly well suited for the visualization of high-dimensional datasets [30]. T-SNE is a nonlinear dimensionality reduction algorithm, which is very suitable for dimensionality reduction of high-dimensional data to two or three dimensions for visualization. For points with greater similarity, the distance of t distribution in the low-dimensional space needs to be smaller; for points with low similarity, the distance of t distribution in the low-dimensional space needs to be farther. This just satisfies our need for features in the same cluster (closer distance) to gather closer, and features between different clusters (farther distance) to be more distant. For the above methods, we extracted high-dimensional features of the training set and test set images respectively and visualized them in a two-dimensional space.
Results
Model accuracy performance on chrysanthemum dataset
For joint supervision of center loss and L2-softmax loss on chrysanthemum dataset, two P-K sampling schemes were designed. For each batch of training, one scheme includes P=5, K=10, and a total of 50 images; the other includes P=18, K= 5 images, and a total of 90 images. Table 2 lists the Top-1 accuracy (%) of chrysanthemum test set obtained with the two schemes for different network architecture. ResNet18 with P=18, K=5 achieves the highest performance by the accuracy of 91.88%.
The ROC curve on chrysanthemum test set
The ROC curve of the five models joint supervision of center loss and L2-softmax loss after 10 cross-validations on chrysanthemum test dataset are shown in Fig. 8.
T-SNE visualization on chrysanthemum dataset
To directly observe the distribution of features extracted by the model about different cultivar images, we applied T-SNE nonlinear dimensionality reduction algorithm. The dimension-reduced scatter plot (Fig. 9) shows the distribution of features extracted from images on chrysanthemum dataset. Fig. 9a depicts the 2-dimension features reduced from 128-dimension in the training set. We can see from this figure that most of the images are mapped on their own fixed areas, images of chrysanthemums from the same cultivar are grouped together, different cultivars are separated, but there is overlap in a small area. By observing the feature distribution map along with example images of each cultivar in Fig. 10, we find that the chrysanthemum in the overlapping area has the same color and similar morphology. This phenomenon also appears in the test set as shown in Figs. 9b and 11.
Results on peony dataset and Oxford 102 flowers dataset
Top-1 and Top-5 accuracy rates are used to evaluate the model trained with only L2-softmax loss (Model S) and joint supervision of center loss and L2-softmax loss (Model C) on peony dataset and Oxford 102 Flowers dataset. Both models include P=18, K= 5 images, and a total of 90 images. Table 3 shows the accuracies of peony dataset. With and without center loss, the model both achieved high recognition accuracy rates. Top-1 accuracy rates of the model are 93.97% and 97.99%, respectively, and Top-5 accuracy rates of the model are 99.82% and 99.73%, respectively. In Table 4, Top-1 accuracy rates of Oxford 102 Flowers dataset with and without center loss are 86.13% and 95.36%, respectively, and Top-5 accuracy rates are 97.34% and 99.42%, respectively, which are slightly lower compared to peony dataset.
To analyze the distribution of features, we drew the boxplots to reflect the distance within and between classes. The distance boxplots are shown in Fig. 12a, b are the boxplots of the Oxford 102 Flowers dataset, Fig. 12c, d are of peony dataset. Among them, Fig. 12a, c only use L2-softmax loss, Fig. 12b, d joint supervision of center loss and L2-softmax loss. The boxplot on the left of each figure represents the distance within the class, and the boxplot on the right represents the distance between classes. The upper and lower lines in the boxplot represent the maximum and minimum values of the data, respectively. The upper and lower boundaries of the rectangular box represent the upper and lower quartiles of the data, respectively, and the middle line represents the median of the data. Compared with the model that only uses L2-softmax loss, the model that adds center loss can reduce intra-class distance significantly.
Discussion
Deep learning and other related technologies have been applied to the research of flower classification tasks and made a series of important progress [10,11,12,13]. Although these methods achieved high recognition accuracy, the image features obtained through the classification network do not reflect the botanical features of flowers, which cannot provide further help for botany research. Compared to only identifying plant species from flower images [10], flower cultivars identification based on metric learning can not only classify flower cultivars accurately, but more importantly make the model has the ability to metric and make the classification results interpretable. In this study, we proposed a method based on metric learning by adding center loss to the classification network for flower cultivars identification. Three different and representative datasets are chosen to evaluate our proposed method and validated the effectiveness.
The model trained in combination with center loss and L2-softmax loss on chrysanthemum dataset, for adopting P-K sampling strategy to construct mini-batch in training, the accuracy of the model using P=18, K=5 scheme is higher than that of using P=5, K=10. This shows that the more classes are included in each batch, the training will be faster and the test accuracy will improve. Top-1 accuracies of different feature extraction networks show that the accuracy rates do not blindly increase as the number of network layers deepens. Due to the small amount of data in this research, there may be overfitting problems on networks with deeper layers. Therefore, ResNet18 has the highest Top-1 accuracy under the same P and K values among the three different network architectures. For peony dataset and Oxford 102 Flowers dataset, we found that the model joint supervision of center loss and L2-softmax loss has a slightly lower accuracy compared to only using L2-softmax loss, but the feature of the same class gathers more closely. Unlike the image angles of peony dataset, which are mostly top-view and oblique-view, Oxford 102 Flowers dataset has a variety of image angles, so the selection of its feature center is slightly difficult, resulting the clustering within the class is not as obvious as peony dataset. Different from face recognition, the backgrounds of the images in peony dataset and Oxford 102 Flowers dataset are not uniform, so the optimization effect will be weakened.
DCNN model is difficult to interpret, visualizing the outputs helps us to understand its training results [31]. The visualization results show that after training, image patches from the same cultivar are gathered on the feature center representing the cultivar, achieving the purpose of establishing cultivar features through local information. In addition, we found that the chrysanthemums in the overlapping area have the same color and similar morphology, while the color and morphology information was not provided during the training, which shows that the network has indeed learned the potential botany information from the image. Especially in the test set, although the chrysanthemum cultivars in the test set did not appear in the training set, the model can still distinguish the unseen cultivars when the test set is applied to the model, indicating that the features learned by the model have good discrimination ability, as compared to results reported in [14]. The model has achieved high generalization, which proves the effectiveness of metric learning. Center loss only focuses on reducing intra-class distance and does not deal with the inter-class distance, which leads to overlaps between different classes. Since each mini-batch updates the center once during the training process which will make the center unstable, it needs to be combined with the L2-softmax loss to maintain stability. Center loss is mostly used for face recognition in previous research [21], so how to solve the overlap problem between samples of different cultivars to make it more suitable for flower cultivars identification and make the model more universal are the direction of our future research.
Conclusions
In this paper, we developed a metric learning method based on DCNN for flower cultivars identification tasks. The results have shown the effectiveness of the proposed method with high recognition rates and the feature extracted from the recognition network is interpretable. The same class gathers more closely and has a strong aggregation, and the distance between different classes increases, showing stronger separation. This study can provide new ideas for the application of a small amount of data in the field of identification, and has important reference significance for the flower cultivars identification research.
Availability of data and materials
The datasets that were used and analysed during the current study are available from the corresponding author upon reasonable request.
Abbreviations
- AI:
-
Artificial intelligence
- CNN:
-
Convolutional neural networks
- DCNN:
-
Deep convolutional neural networks
- FSL:
-
Few-shot learning
- SGD:
-
Stochastic gradient descent
- ROC:
-
receiver operating characteristic
- AUC:
-
area under ROC curve
- T-SNE:
-
T-distributed stochastic neighbor embedding
References
Rousseau D, Dee H, Pridmore T. Imaging methods for phenotyping of plant traits. Phenomics in Crop Plants: Trends, Options and Limitations. 2015. p. 61-74.
Scharr H, Dee H, French AP, Tsaftaris SA. Special issue on computer vision and image analysis in plant phenotyping. Machine Vision Appl. 2016;27:607–9.
Bonnet P, Joly A, Goeau H, Champ J, Vignau C, Molino JF, Barthelemy D, Boujemaa N. Plant identification: man vs machine LifeCLEF 2014 plant identification challenge. Multimedia Tools Appl. 2016;75(3):1647–65.
Tsaftaris SA, Minervini M, Scharr H. Machine learning for plant phenotyping needs image processing. Trends Plant Sci. 2016;21(12):989–91.
Pound MP, Atkinson JA, Townsend AJ, Wilson MH, Griffiths M, Jackson AS, et al. Deep machine learning provides state-of-the-art performance in image-based plant phenotyping. Gigascience. 2017;6:1–10.
Ubbens JR, Stavness I. Deep plant phenomics: a deep learning platform for complex plant phenotyping tasks. Front Plant Sci. 2017.
Sun Y, Liu Y, Wang G, Zhang H. Deep learning for plant identification in natural environment. Comput Intell Neurosci. 2017;2017(4):7361042.
Ghosal S, Blystone D, Singh AK, Ganapathysubramanian B, Sarkar S. An explainable deep machine vision framework for plant stress phenotyping. Proc Natl Acad Sci USA. 2018;115(18):4613–8.
Lee SH, Chan CS, Wilkin P, Remagnino P. Deep-plant: plant identification with convolutional neural networks. IEEE International Conference on Image Processing (ICIP); 2015. p. 452-456.
Nguyen N, Le V T, Le T L, Hai V. Flower species identification using deep convolutional neural networks. AUN/SEED-Net Regional Conference on Computer and Information Engineering (RCCIE). 2016.
Gurnani A, Mavani V. Flower categorization using deep convolutional neural networks. 2017.
Hiary H, Saadeh H, Saadeh M, Yaqub M. Flower classification using deep convolutional neural networks. IET Comput Vision. 2018;12(6):855–62.
Cıbuk M, Budak U, Guo Y, Cevdet IM, Sengur A. Efficient deep features selections and classification for flower species recognition. Measurement. 2019;137:7–13.
Liu ZL, Wang J, Tian Y, Dai SL. Deep learning for image-based large-flowered chrysanthemum cultivar recognition. Plant Methods. 2019;15:146.
LeCun YA, Bengio Y, Hinton GE. Deep learning. Nature. 2015;521:436–44.
Michael F. Object Classification from a Single Example Utilizing Class Relevance Metrics. Proceedings of the 17th International Conference on Neural Information Processing Systems; 2004. p. 449–456.
Lu J, Gong PH, Ye JP, Zhang CS. Learning from Very Few Samples: A Survey. 2020.
Koch G, Zemel R, Salakhutdinov R. Siamese neural networks for one-shot image recognition. International Conference on Machine Learning. 2015.
Li W, Xu J, Huo J, Wang L, Gao Y, Luo J. Distribution Consistency Based Covariance Metric Networks for Few-Shot Learning. Proc AAAI Conference Artificial Intell. 2019;33(01):8642–9.
Shulin Z, Silan D. Chinese chrysanthemum book. Beijing: China Forestry Publishing House; 2013. (in Chinese).
Wen Y, Zhang K, Li Z, Qiao Y. A Discriminative Feature Learning Approach for Deep Face Recognition. Europeon Conference on Computer Vision (ECCV); 2016. p. 499-515.
Ranjan R, Castillo C, Chellappa R. L2-constrained Softmax Loss for Discriminative Face Verification. 2017.
Chen T, Kornblith S, Norouzi M, Hinton G. A Simple Framework for Contrastive Learning of Visual Representations. Proceedings of the 37th International Conference on Machine Learning, PMLR. 2020;119: 1597-1607.
Nilsback M, Zisserman A. Automated Flower Classification over a Large Number of Classes. Proceedings of the 2008 Sixth Indian Conference on Computer Vision, Graphics & Image; 2008. p. 722-729.
Geirhos R, Rubisch P, Michaelis C, Bethge M, Wichmann F, Brendel W. ImageNet-trained CNNs are biased towards texture; increasing shape bias improves accuracy and robustness. 2018.
He K, Zhang X, Ren S, Jian S, editors. Deep residual learning for image recognition. Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition (CVPR); 2016. p. 770-778.
Russakovsky O, Deng J, Su H, Krause J, Satheesh S, Ma S, Huang Z, Karpathy A, Khosla A, Bernstein M, Berg A, Li F. ImageNet large scale visual recognition challenge. Int J Comput Vision. 2015;115(3):211–52.
Hermans A, Beyer L, Leibe B. In defense of the triplet loss for person re-identification. 2017.
He K, Zhang X, Ren S, Sun J. Delving Deep into Rectifiers: Surpassing Human-Level Performance on ImageNet Classification. Proceedings of the IEEE International Conference on Computer Vision (ICCV); 2015. p. 1026-1034.
Laurens VDM, Hinton G. Visualizing Data using t-SNE. J Machine Learning Res. 2008;9(86):2579–605.
Bau D, Zhou B, Khosla A, Oliva A, Torralba A. Network Dissection: Quantifying Interpretability of Deep Visual Representations. 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR). 2017. p. 3319-3327.
Acknowledgements
Not applicable.
Funding
This work was supported by the National Natural Science Foundation of China (No. 31530064), the National Natural Science Foundation of China (No. U1804233), the National Key Research and Development Plan (No. 2018YFD1000405), the Beijing Science and Technology Project (No. Z191100008519002) and the Major Research Achievement Cultivation Project of Beijing Forestry University (No. 2017CGP012).
Author information
Authors and Affiliations
Contributions
YT and JZ conceived the study. SD and XH completed the work of cultivars confirmation, review, and flower guidance. JW and QG undertook the cultivation, collection, and data labeling of chrysanthemum and peony, respectively. YT and RZ performed the experiments, analyzed the data, prepared figures and tables. RZ completed the first draft. YT revised the manuscript. All authors read and approved the final manuscript.
Corresponding authors
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare that they have no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Zhang, R., Tian, Y., Zhang, J. et al. Metric learning for image-based flower cultivars identification. Plant Methods 17, 65 (2021). https://doi.org/10.1186/s13007-021-00767-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s13007-021-00767-w