Abstract
Background
The resistance of Plasmodium falciparum to artemisinin-based (ART) drugs, the front-line drug family used in artemisinin-based combination therapy (ACT) for treatment of malaria, is of great concern. Mutations in the kelch13 (k13) gene (for example, those resulting in the Cys580Tyr [C580Y] variant) were identified as genetic markers for ART-resistant parasites, which suggests they are associated with resistance mechanisms. However, not all resistant parasites contain a k13 mutation, and clearly greater understanding of resistance mechanisms is required. A genome-wide association study (GWAS) found single nucleotide polymorphisms associated with ART-resistance in fd (ferredoxin), arps10 (apicoplast ribosomal protein S10), mdr2 (multidrug resistance protein 2), and crt (chloroquine resistance transporter), in addition to k13 gene mutations, suggesting that these alleles contribute to the resistance phenotype. The importance of the FD and ARPS10 variants in ART resistance was then studied since both proteins likely function in the apicoplast, which is a location distinct from that of K13.
Methods
The reported mutations were introduced, together with a mutation to produce the k13-C580Y variant into the ART-sensitive 3D7 parasite line and the effect on ART-susceptibility using the 0−3 h ring survival assay (RSA0−3 h) was investigated.
Results and conclusion
Introducing both fd-D193Y and arps10-V127M into a k13-C580Y-containing parasite, but not a wild-type k13 parasite, increased survival of the parasite in the RSA0−3 h. The results suggest epistasis of arps10 and k13, with arps10-V127M a modifier of ART susceptibility in different k13 allele backgrounds.
Similar content being viewed by others
Background
Artemisinin (ART)-based combination therapy (ACT) for Plasmodium falciparum malaria is the frontline drug combination recommended by the World Health Organization (WHO). ART and derivatives (ARTs) are the most effective drugs for parasite elimination since they are fast-acting, but they have a short half-life. ACT uses a treatment of ARTs with a second drug that has a longer half-life to ensure removal of all parasites. The emergence of parasite resistance to ARTs is extremely concerning. ART-resistance is characterized by slow parasite clearance in patients, and reduced susceptibility of ring-stage parasites in an in vitro 0−3 h ring survival assay (RSA0−3 h) [1]. Clinically resistant parasites were first detected in western Cambodia and have spread throughout the Greater Mekong Sub-region and beyond [2,3,4].
Mutations in the gene encoding the propeller domain of the Kelch13 (K13) protein were identified as genetic markers associated with ART-resistance [5]. The role of K13 in ART resistance has been clearly established by both forward and reverse genetic studies, but its biochemical function remains unclear. The level of resistance appears to be modulated by mutations in other genes that occurred during in vitro selection, suggesting that resistance may be multifactorial. For example, it was reported that a mutation in the PF3D7_0110400 gene occurred at the same time as the K13 mutation and that this was associated with resistance level in RSA0−3 h. However, mutations in PF3D7_0110400 have not been identified in resistant field isolates, suggesting that this mutation selected under in vitro drug pressure may not occur in nature. Another important question that arose from this study is whether mutations in other genes are epistatic to k13 mutations, i.e., does the ART-resistance phenotype mediated by a k13 allele depend on mutations in other genes?
A genome-wide association study (GWAS) of field-isolates reported k13 alleles and single nucleotide polymorphisms (SNPs) at different loci associated with resistant founder populations in which k13 mutations had arisen [6]. The reported SNPs were in fd (ferredoxin, fd-D193Y), arps10 (apicoplast ribosomal protein S10, arps10-V127M), mdr2 (multidrug resistance protein 2, mdr2-T484I), and crt (chloroquine resistance transporter, crt-N326S). The fd-D193Y SNP (Asp193Tyr substitution in ferredoxin) was most strongly associated with resistant founder populations and the arps10-V127M SNP (Val127Met substitution in apicoplast ribosomal protein S10) was the SNP most strongly associated with delayed parasite clearance after k13-C580Y, the most common of the k13 alleles found in the Greater Mekong Subregion (GMS) [7]. Hence, the questions raised by this GWAS study include: do the reported SNPs, fd-D193Y and arps10-V127M contribute to ART resistance, and is there an epistatic relationship between the k13 mutant and the reported SNPs in an ART-resistance phenotype? Both FD and ARPS10 are nuclear encoded apicoplast proteins, therefore, do different alleles of these two genes affect the function of the proteins and of the apicoplast, to provide an advantage to the parasite for survival under drug pressure? Apicoplast function includes type II fatty acid biosynthesis, de novo haem biosynthesis, and isoprenoid biosynthesis, but only isoprenoid biosynthesis is thought to be important in the asexual blood stage of the life cycle [8].
To examine the effect of the SNPs identified in the GWAS study, and genetic epistasis with the k13 allele, genome editing was performed to introduce specific mutations into the target genes. In an earlier genome editing study, k13 mutations from Cambodian field isolate parasites were reported to confer ART resistance [9]. Editing the wild type k13 gene in the ART-sensitive parasite to introduce the reported k13 mutations significantly increased the survival of the parasite in RSA0−3 h, and converting k13 mutants to k13 wild type sequence in ART-resistant parasite lines from Cambodian isolates restored parasite sensitivity to ART. The introduction of different k13 mutations into the same parasite line resulted in differences in the parasite survival and the introduction of the same k13 mutation into different parasite lines also resulted in differences in the parasite survival, indicating that the parasite’s genetic background affects the level of resistance conferred by individual k13 mutations.
The CRISPR/Cas9 genome editing system was used to modify the ART-sensitive 3D7 parasite line. Mutations to produce k13-C580Y, fd-D193Y and arps10-V127M either individually or together was performed and 3D7 was used for the experiment control, so the genetic background of all modified parasites was the same. 3D7 is a laboratory P. falciparum line originally from Africa where the spread of ART resistance is concerning. The fd and arps10 mutations were expected to modulate sensitivity to ART, but only in a k13 mutant background so the fd and arps10 mutations were introduced into 3D7 and a k13-C580Y containing 3D7.
Methods
Plasmodium falciparum culture and synchronization
Parasites were cultured in a complete RPMI 1640 medium (RPMI 1640 medium with 2 mM l-glutamine, 25 mM HEPES, 2 g/L NaHCO3, 27.2 mg/L hypoxanthine and 0.5% Albumax II, pH7.4) using human O + erythrocytes (2−4% haematocrit). Parasite cultures were gassed with 90% N2, 5% CO2 and 5% O2 and incubated at 37 °C. Parasite developmental stage and viability were routinely assessed by microscopic examination of Giemsa-stained thin blood films. Before transfection, parasite populations were tightly synchronized using a 70% Percoll gradient to purify schizont stages. Synchronous ring stage parasite populations were produced from purified schizonts by allowing merozoite invasion for three hours, followed by 5% D-sorbitol treatment to remove residual schizonts as described in [10].
Plasmid design and construction for mutagenesis
The genomic DNA sequences of Pfk13 (PF3D7_1343700), Pffd (PF3D7_1318100) and Pfarps10 (PF3D7_1460900.1) were obtained from PlasmoDB, Plasmodium Informatics Resources (www.PlasmoDB.org) and used for plasmid, oligonucleotide, and primer design.
To construct Cas9 plasmids, three independent guides for the gene of interest (GOI) were designed to direct Cas9 cutting to near the codon to be modified. A pair of complementary oligonucleotides were phosphorylated, annealed, and cloned into the pDC2-cam-Cas9-U6-hDHFRyFCU-plasmid [10] via a BbsI restriction site for pCas9_pfk13g, pCas9_pffdg and pCas9_pfarps10g, used for mutagenesis of codons to produce the k13-C580Y, fd-D193Y and arps10-V127M variants, respectively. The pairs of complementary oligonucleotides are shown in Additional file 1: Table S1.
To construct a repair plasmid to introduce the required mutation, a recodonized sequence was designed, containing the modified codon and flanked with homologous regions (HR) for integration into the target GOI. The recodonized region of the guide RNA encoded the same amino acids as the endogenous sequence except for the codon to be changed and changes to prevent Cas9 cleavage of the modified sequence. For the repair plasmid to generate k13-C580Y (pMA_k13MT), a 42 bp recodonized sequence region was flanked with pfk13HR1 (310 bp) and pfk13HR2 (360 bp), respectively. The DNA sequence was synthesized and cloned into pMA, an ampicillin resistance plasmid, by GeneArt, Life Technologies. For the repair plasmid to generate fd-D193Y (pMK_fdMT), a 40 bp recodonized sequence was flanked with pffdHR1 (400 bp) and pffdHR2 (406 bp), respectively. The DNA sequence was synthesized by GeneArt and provided in pMK, a kanamycin resistance plasmid. For the repair plasmid to generate arps10-V127M (pGEM-T_arps10MT), a 21 bp recodonized sequence region was flanked with pfarps10HR1 (339 bp) and pfarps10HR2 (346 bp), respectively. To construct this plasmid, pairs of primers were designed to amplify pfarps10HR1 and pfarps10HR2 from 3D7 genomic DNA. The reverse primer for pfarps10HR1 (arps10HR1_R) and the forward primer for pfarps10HR2 (arps10HR2_F) were designed to amplify overlapping sequences with the generation of the recodonized sequence region between pfarps10HR1 and pfarps10HR2. Following PCR amplification of pfarps10HR1 and HR2, the products were used in a second PCR reaction using arps10HR1_F and arps10HR2_R to generate the full DNA repair sequence, which was cloned into the pGEM-T Easy vector. The plasmid structure was confirmed by restriction enzyme digestion and sequence analysis. Repair plasmid sequences are provided in Additional file 2: Table S2.
Plasmodium falciparum transfection and cloning
Sixty µg of linearized repair plasmid and 20 µg of CRISPR/Cas9 plasmid carrying the specific guide RNA sequence were co-precipitated with ethanol and then dissolved in 10 µl sterile TE (10 mM Tris-HCl 1 mM EDTA pH 8.0). This transfection DNA mixture was added to 100 µl of AMAXA primary cell solution P3, mixed with 10 to 40 µl of synchronized mature schizonts and electroporated using an Amaxa 4D-Nucleofector™ (Lonza) with program FP158. To select for parasites with the Cas9/guide plasmid, the transfected parasites were cultured in 2.5 nM WR99210 for four days. Then, the cultures were treated with 1 µM 5-fluorocytosine (5-FC) for one week to negatively select parasites retaining the Cas9/guide plasmid. The parasite population was screened for integration by PCR analysis, using the pairs of primers shown in Fig. 1A, D, G. Then, the transgenic parasites were cloned by limiting dilution and screening by PCR. The presence of the mutant sequence in cloned parasites was confirmed by DNA sequence analysis of PCR products, using the primers described in Fig. 1A, D, G.
Strategy to introduce the k13-C580Y, fd-D193Y and arps10-V127M alleles. A k13-C580Y mutagenesis. Plasmid pCas9_pfk13g and linearized plasmid pMA_k13MT were co-transfected into the 3D7 parasite; pCas9_pfk13g contains expression cassettes for Cas9 and k13 specific guide RNA for generating a double-strand break in k13. The k13-C580Y mutation was introduced by homology-directed DNA repair using k13HR1 and k13HR2 sequences in pMA_k13MT. The k1/k2 primer pair was used to identify the wild-type genotype (product size = 481 bp) of the unmodified parasite and the k1/k3 pair was used to identify the modified gene (product size = 492 bp). B Genotype analysis by PCR amplification of the modified parasite after cloning. Two transgenic parasite clones (KMTC1 and KMTC2) were isolated and tested by PCR analysis in comparison with 3D7 (C) DNA sequence analysis of KMTC1. The k13-C580Y mutated codon is highlighted in red (TGT(C) ◊ TaT(Y)). D fd-D193Y mutagenesis. The pCas9_pffd and pMK_fdMT plasmid pair was used for Pffd gene modification. The f1/f2 and f1/f3 primer pairs were used to identify unmodified parasites (product size = 704 bp) and modified parasites (product size = 711 bp), respectively. For the sequence analysis, the f4/f5 primer pair was used to amplify and read the sequence. E The genotype analysis of the fd-D193Y mutated parasites. E (upper) PCR result for clonal parasites (FMTC1 and FMTC2) with single fd-D193Y mutation. E (lower) PCR result for cloned parasite (KMTFMT) with double mutation k13C580YfdD193Y. F DNA sequence analysis result confirming the fd-D193Y mutation: the sequence result for the FMTC1 parasite (F, upper) and KMTFMT (F, lower) with the fd-D193Y mutated codon highlighted in red (GAC(D) ◊ tAt(Y)). G arps10-V127M mutagenesis. The pCas9_pfarps10 and linearized pGemT_arps10MT plasmids were used to modify the arps10 gene in 3D7 and KMTFMT parasites. The a1/a2 (product size = 462 bp) and a3/a2 (product size = 459 bp) primer pairs were used to identify unmodified parasite and modified parasite, respectively. The a4/a2 primer pairs were used to amplify and read the sequence for sequence analysis. H PCR genotypic analysis: (H, upper) PCR result for two clonal lines of AMT. (H, lower) PCR result for one clonal line of KMTFMTAMT. I DNA sequence analysis confirming arps10-V127M mutation. Data are shown for AMT (I, upper) and KMTFMTAMT (I, lower) clonal lines with the arps10-V127M mutated codon highlighted in red (GTG(V) ◊ aTG(M)). Pfk13-g, Pffd-g or Pfarps10-g: Pfk13, Pffd or Pfarps10 specific guide RNA gene cassette, cas9: Cas9 gene cassette, hdhfr-yfcu: drug selectable marker, HR; Homologous region, KMT = k13C580Y mutation, FMT = fdD193Y mutation, AMT = arps10V127M mutation
Parasite growth assay
Growth analysis of the parental 3D7 and modified parasites was performed over two intraerythrocytic replication cycles. Tightly synchronized ring stage parasite populations (0−3 h post-invasion) were prepared at 0.2% parasitaemia and 2% haematocrit. Parasite morphology and percentage parasitaemia were determined by microscopic examination of Giemsa-stained blood films at 0 h, 24 h, 48 h, 72 and 96 h time points to assess parasite growth and development. Experiments were performed three times, each with two technical replicates. Data for each modified parasite were compared to those for parental 3D7 parasites and analysed statistically using a one-way ANOVA analysis with Dunnett’s multiple comparisons test.
ART-susceptibility assessment by 0−3 h ring survival assay (RSA0−3 h)
Synchronous populations of mature schizonts were prepared by Percoll-purification and released merozoites were allowed to invade new red blood cells for exactly 3 h (producing 0−3 h ring stages), followed by 5% sorbitol treatment to remove residual schizonts. The culture was prepared at 0.5−1% parasitaemia and 2% haematocrit, and Giemsa-stained thin smears were prepared to measure the initial percent parasitaemia (INI). Cultures were treated with either 0.1% DMSO (non-DHA exposed control [NE]), 20 nM DHA or 700 nM DHA for 6 h in 48-well plates. Each parasite sample was then washed once with 9 ml RPMI 1640, resuspended in 1 ml complete medium, placed in a new well, and cultured for a further 66 h. Giemsa stained smears were prepared for microscopic analysis of parasite morphology and percent parasitaemia, in which at least 10,000 erythrocytes were counted for each sample. Assays were repeated 5 or 6 times independently, with two technical repeats for each sample. Growth and survival were calculated by the formulae below. Only if the growth was ≥ 1.5 was the percent survival rate calculated.
GraphPad Prism 8.3.0 was used for all statistical analyses. One-way ANOVA with Tukey’s multiple comparisons test was used to compare the mean survival of each parasite to the mean survival of every other. One-way ANOVA with Dunnett’s multiple comparisons test was used to compare the mean growth or the mean percentage of the growth stages of each parasite to the corresponding mean of the control parasite. P < 0.05 was considered statistically significant.
Results
Transgenic parasites established by CRISPR/Cas9 mutagenesis
Plasmids were designed and prepared for mutagenesis to insert the k13-C580Y, fd-D193Y and arps10-V127M mutations into the 3D7 parasite genome. For each mutagenesis, a Cas9 and a repair plasmid were designed and constructed (Additional files 1, 2: Tables S1, S2), co-transfection was performed, and then modified parasites were screened, selected and cloned (Fig. 1).
To insert the k13-C580Y mutation, following transfection and selection the modified parasites were examined using PCR with primer pairs k1/k2, designed to amplify only wildtype unmodified k13 sequence and the primer pairs k1/k3, designed to amplify only modified k13 sequence (Fig. 1A). PCR analysis of two parasite lines, selected and cloned by limiting dilution, revealed a positive product only with the k1/k3 primer pair while the parental 3D7 parasite was only positive with the k1/k2 primer pair. This indicates that the transgenic parasites were successfully modified and contain only the k13-C580Y allele (Fig. 1B). DNA sequence analysis of the region of k13 amplified using the k1/k4 primer pair confirmed that the desired mutation had been introduced into the parasite (Fig. 1C), and this clone was used in subsequent experiments.
To investigate the contribution of fd-D193Y to ART resistance, the fd-D193Y mutation was introduced into both the parental 3D7 and transgenic k13C580Y_3D7 parasite. Modified parasites were screened by PCR analysis: the f1/f2 primer pair was designed to amplify wildtype-fd and the f1/f3 primer pair was designed to specifically amplify the modified-fd sequence (Fig. 1D). Two parasite clones containing the modified fd allele were confirmed by PCR analysis: they were positive only with the f1/f3 primer pair, and contained the fd-D193Y allele (Fig. 1E, upper). Following mutagenesis of the k13C580Y_3D7 parasite to introduce the fd-D193Y allele, the transgenic parasite was selected, cloned and the sequence confirmed using the same strategy. The fd-modified k13C580Y_3D7 was positive only in a PCR reaction with the f1/f3 primer pair, so the transgenic parasite was k13C580YfdD193Y_3D7 (Fig. 1E, lower). The DNA sequence analyses confirmed that the fd gene of 3D7 (Fig. 1 F, upper) and k13C580Y_3D7 (Fig. 1F, lower) parasites had been modified to fd-D193Y. The confirmed fdD193Y_3D7 and k13C580YfdD193Y_3D7 parasite lines were used in subsequent experiments.
The ART-resistant parasite from a field isolate sampled in the GWAS contained multiple SNPs in addition to those in k13 and fd, a further modification to the k13C580YfdD193Y_3D7 parasite was performed. Of particular interest was the arps10-V127M allele, the k13C580YfdD193Y arps10V127M_3D7 parasite, and also arps10V127M_3D7 were established to observe any effect of arps10-V127M alone on ART resistance. The arps10-V127M mutagenesis was performed on the 3D7 and k13C580Y fdD193Y_3D7 parasite lines and the products analysed by PCR, using the primers shown in Fig. 1G. Two clones of arps10-modified 3D7 parasites were confirmed by PCR analysis to have the arps10-V127M allele, with 3D7 used as a control for comparison. Both selected clones were arps10-modified parasites (Fig. 1H, upper). For arps10-modified k13C580Y fdD193Y_3D7, the selected clone was confirmed to contain the k13-C580Y, fd-D193Y and arps10-V127M alleles by PCR analysis, so the arps10-modified k13C580Y fdD193Y_3D7 had been modified and still carried the k13-C580Y and fd-D193Y alleles (Fig. 1H, lower). DNA sequence analysis confirmed the presence of the arps10-V127M allele in arps10-modified 3D7 (Fig. 1I, upper) and arps10-modified k13C580YfdD193Y_3D7 (Fig. 1I, lower) parasites lines.
Growth of the transgenic parasites was the same as that of the 3D7 parasite
To examine the effect of each mutation on parasite growth, transgenic parasites were compared with the parental 3D7 parasite line over two erythrocytic development cycles. No differences in morphology were apparent among transgenic lines compared with 3D7 at each time point, suggesting that development was unaffected by the mutations (Fig. 2A). At the end of cycle 2, the fold increase of all transgenic parasites was not significantly different from that of 3D7 (one-way ANOVA with Dunnett’s multiple comparisons test, three independent experiments) (Fig. 2B). In conclusion, the alleles k13-C580Y, fd-D193Y and arps10-V127M alone, k13-C580Y together with fd-D193Y, or k13-C580Y, fd-D193Y and arps10-V127M together, did not significantly affect parasite proliferation or development compared with 3D7, suggesting that there is no substantial fitness cost associated with these alleles in vitro.
Growth and development of the modified parasites. A Giemsa-stained parasites at 0, 24, 48, 72 and 96 h after initial invasion (hpi). Most parasites in each population of modified parasites were at the same stage of development as parental 3D7 parasites. B Fold increase in percentage parasitaemia over 2 cycles (96 h). The results are shown as means ± SD of 3 independent experiments. One-way ANOVA with Dunnett’s multiple comparisons test was performed. The growth of all transgenic parasites was not significantly different from 3D7 (95% CI). KMT = k13C580Y mutation, FMT = fdD193Y mutation, AMT = arps10V127M mutation
Phenotypic analysis of parasite ART-resistance by ring stage survival assay
The susceptibility of the modified parasites to ART was examined using the in vitro 0 to 3 h ring survival assay (RSA0 − 3 h) to determine percent survival after a 6 h treatment with 700 nM DHA [11]. The lower 20 nM DHA concentration was also tested to further differentiate ART-sensitive from ART-resistant parasites [12]. The 3D7 parental line was used as the ART-sensitive parasite control and MRA1240 (IPC 5202) was used as an ART-resistant parasite control; MRA1240 is a parasite line from a malaria patient in western Cambodia containing k13-R539T, which confers high resistance to ART in RSA0 − 3 h. Growth was also measured for untreated parasites over the same period as RSA0−3 h, providing controls to interpret the percentage survival values (the parasite growth must be ≥ 1.5).
As expected, the survival of 3D7 following 700 nM DHA treatment was below 1%, whereas that of MRA1240 was greater than 30%. The transgenic parasites with the K13C580Y mutation (i.e. the KMT, KMTFMT, and KMTFMTAMT parasite lines) also showed greater than 1% survival, and therefore they are also defined as ART-resistant (Fig. 3; Table 1). The survival of FMT in 20 nM and 700 nM DHA was not significantly different to the survival of 3D7 in both DHA treatments, unlike the increased survival of KMT. The survival of KMTFMT in 20 nM DHA and 700 nM DHA was not significantly different from the corresponding survival of KMT. Therefore, the fd-D193Y allele in either the 3D7 or the K13C580Y parasite lines did not affect the parasite’s ART-sensitivity phenotype. The survival of AMT in 20 nM and 700 nM DHA was not significantly different from the corresponding survival of 3D7. The survival of the triple mutant KMTFMTAMT in 20 nM and 700 nM DHA was significantly different from the corresponding survival of the single (KMT) and double mutant (KMTFMT) in 20 nM and 700 nM DHA. Therefore, the ARPS10V127M mutation appears to modulate ART sensitivity depending on the genetic background. Interestingly, the survival of KMTFMTAMT was not significantly different from that of MRA1240 in 700 nM DHA, wherease in 20 nM DHA the survival differed.
Percentage of parasite ring survival in RSA 0−3 h. Univariate scatterplots of the % survival for 20 nM DHA treatment (left) and 700 nM DHA treatment (right) for the modified parasite lines, parental 3D7 and ART-resistance control strain (MRA1240). Mean and error bars (SD) are also shown for each sample group. One-way ANOVA with Tukey’s multiple comparisons test was performed. The dotted line at 1% survival shows the cut off used to discriminate between sensitive and resistant lines in the 700 nM DHA treatment. KMT = k13C580Y mutation, FMT = fdD193Y mutation, AMT = arps10V127M mutation
Effect of DHA treatment on parasite growth and morphology
The effect of DHA treatment on parasite growth and morphology was assessed by light microscopy (Fig. 4). At 72 h following mock treatment, in all samples most parasites were viable and at late trophozoite to early schizont stages of development. Following DHA treatment, most 3D7, FMT and AMT parasites were identified as pyknotic and dead (indicated by arrows). In contrast, a much greater proportion of KMT, KMTFMT, and KMTFMTAMT parasites appeared to be viable late trophozoite and early schizont stages. MRA1240 parasites also appeared viable and mostly at the ring stage, with some early trophozoites, consistent with growth delay. The percent of trophozoite/schizont and ring stage parasites in each parasite and treatment group was compared statistically using one-way ANOVA, and only MRA1240 was significantly different in the distribution of parasite stages when compared with 3D7 (Additional file 3: Fig. S1).
Parasite morphology in control (mock treatment; + 0.1% DMSO) or drug treated (+ 20 nM DHA and + 700 nM DHA) cultures. A Representative images from Giemsa-stained thin smears showing morphology of parasites at 72 h of treatment. Most of the 3D7, FMT and AMT parasites treated with DHA were identified as pyknotic and dead (indicated by arrows). In contrast, a marked proportion of KMT, KMTFMT, and KMTFMTAMT parasites appeared viable and mostly at the late trophozoite and early schizont stages of development. MRA1240 parasites also appeared viable and mostly at the ring stage, with some early trophozoites, consistent with some growth delay. B The percent infected red cells containing trophozoites and schizonts (blue), rings (red) and pyknotic forms (green)
Discussion
Most ART-resistant parasites from field isolates contain k13 mutations. Several different k13 alleles have been identified and associated with different levels of ART resistance. In addition to the k13 alleles, SNPs in other genes have been identified that are associated with ART resistance, and it is important to establish whether or not these genes have a direct or indirect role in the manifestation of the resistance phenotype. If many genetic factors drive resistance, then it will be important to establish the role of specific genes and individual alleles of those genes. GWAS studies have identified a high prevalence of SNPs associated with resistance, and it is possible that k13 alleles and different alleles of other genes are epistatic in modulating parasite survival in the presence of artemisinin. Therefore, it is of interest to establish whether, within a defined genetic background and with a single k13 allele, mutations in other genes may modify parasite survival in the presence of ART.
The mutations of particular interest were fd-D193Y and arps10-V127M, which were reported to be highly associated with ART-resistance in a GWAS. Ferredoxin is a protein that functions in the apicoplast and the fd-D193Y allele has been implicated in ART-resistance. Plasmodium falciparum ferrodoxin (PfFd) interacts with P. falciparum ferredoxin NADP+ reductase (PfFNR) in a major redox system of the apicoplast. Fd-FNR interaction studies suggest that Fd-D193Y (D97Y at the C-terminus of mature ferredoxin in the apicoplast) is within an important interaction site for electron exchange. Site-directed mutagenesis to substitute PfFd C-terminal residues indicated that an aromatic residue at positions 96 and 97 increased the PfFd-PfFNR binding affinity. A recent study analysing the interaction of PfFd-D193Y and PfFNR showed mutations leading to attenuation of PfFNR function and suggested that this could be associated with the action of artemisinin [13, 14]. ARPS10 has a role in apicoplast protein translation. k13 mutations have been reported to deregulate phosphorylation of PfPK4, leading to downstream phosphorylation of eukaryotic translation initiation resulting in reduced rate of intraerythrocytic development via regulation of translation. This leads to an extended ring stage and lower haemoglobin catabolism, resulting in reduced levels of free Fe(II)PPIX available to activate artemisinin [15]. It is possible that arps10 mutations might affect the level of apicoplast protein(s), which interact directly with the mechanism of ART-resistance or enhance the effect of k13 mutation.
These hypotheses were investigated by measuring the RSA survival of parasites with k13 wild-type or k13 mutant alleles and fd and arps10 alleles in the same genetic background. To clarify the potential interaction of fd-D193Y and arps10-V127, these mutant genes were introduced into a single laboratory sensitive parasite strain to remove other genetic factors that could interfere with the analysis. There are several studies that introduced the k13-C580Y allele into the 3D7 parasite line [12, 16,17,18]. The measured survival of the k13-C580Y-containing 3D7 from previous studies varied from 0.9 to 30.6%. The measured survival of KMT was similar to that measured for 3D7 expressing K13C580Y-HA, for which the survival of the parasite was about 9% [16], validating the approach used and the generated transgenic ART-resistant parasites in this study.
The first finding in this study was that none of the genetic modifications had any apparent deleterious effect on parasite growth in the absence of drug. This indicates that there might be no fitness cost associated with these mutations in the asexual blood stages of the life cycle. This is important because a mutation that enhances ART-resistance but causes the parasite to grow less well in the absence of drug is unlikely to become fixed in the population. A previous study reported a growth defect in their transgenic 3D7C580Yparasite, determining the growth defect by co-culture of the parasite line with 3D7WT. They compared the in vitro growth rates for 36 days to quantify the proportion of each k13 allele, while in our experiment the growth was only examined for 4 days.
The addition of fd-D193Y or arps10-V127M alone into 3D7 did not make parasites resistant to ART in the RSA0 − 3 h since their survival in 700 nM DHA treatment was < 1%. However this does not mean that fd-D193Y or arps10-V127M do not have a role in the ART-resistance mechanism, if there is a possibility that their contribution depends on the k13 allele present. Therefore, these mutations were introduced into a parasite that already partially resists ART and examined the effect on ART-susceptibility. No difference was observed in ART-susceptibility between KMTFMT and KMTparasites. It is possible that the fd-D193Y mutation may have an insufficient effect on Fd function to cause a measurable difference in ART susceptibility. This result is in line with that of a recent study in which reversion of fd-D193Y to wild-type did not increase parasite susceptibility to ART [18]. However, addition of arps10-V127M into the KMTFMT parasite did enhance the resistance level as shown by a 1.6–1.7 fold increase in the survival of KMTFMTAMT compared with the KMT and KMTFMT parasite lines.
The survival of the KMTFMTAMT line to that of MRA1240 was also compared. MRA1240 is an ART-resistant parasite isolated from a malaria patient in western Cambodia, and a representative of resistant parasites in nature. The fd and arps10 genes of MRA1240 were checked by PCR amplification and sequence analysis; MRA1240 parasites contain the fd-D193Y and arps10-V127M alleles, respectively (Additional file 4: Fig. S2). This finding correlates with the GWAS report that fd-D193Y and arps10-V127M are genetic background markers of k13 mutant-containing parasites, correlating with the ART resistant parasite population [6]. The survival of KMTFMTAMT was no different from that of MRA1240 following 700 nM DHA treatment which was unexpected because MRA1240 contains the k13-R539T allele expected to confer a higher ART resistance than k13-C580Y. Interestingly, following 20 nM DHA treatment the KMTFMTAMT parasite showed greater sensitivity than MRA1240; k13-R539T may lead to greater loss of K13 function in parasites and consequently greater ART resistance, although both R539T and C580Y have a similar effect on K13 folding in vitro [19]. Perhaps it also reflects the complexity of the mode of action of ART and the resistance mechanisms evolved by the parasite. Since both fd-D193Y and arps10-V127M alleles show enhanced survival with the k13-C580Y allele in RSA0−3 h, so differences in the k13 allele background might produce different effects on ART-resistance. It is possible that the fd-D193Y and arps10-V127M alleles are important to MRA1240 survival in RSA0 − 3 h. The current assays for ART susceptibility of parasites may not be sensitive enough to detect small contributions to the overall phenotype and this may explain why a phenotypic effect of fd-D193Y could not observed. The finding in this study is consistent with the observed prevalence of fd-D193Y and arps10-V127M alleles in field isolates with high levels of ART resistance. Both fd-D193Y and, in particular, arps10-V127M alleles may be required to confer high-level ART resistance acting epistatically with different k13 alleles and in diverse genetic backgrounds.
The Fd-FNR redox system is an important supplier of electrons in the apicoplast for isoprenoid precursor synthesis [20]. Defects in ferredoxin might affect isoprenoid synthesis leading to a decrease of precursors for molecules such as PI3P, important for vesicular formation. ARPS10 is important in apicoplast protein translation, for example synthesis of Suf B, encoded in the apicoplast genome, that is a part of the Suf BCD assembly complex in the Suf iron-sulfur cluster synthesis pathway (Suf pathway). A defect in ARPS10 might affect the translation of Suf B, which consequently affects the Suf pathway [21]. The Suf pathway provides essential FeS-cluster cofactors for enzymes in the isoprenoid synthesis pathway including Fd, IspH and IspG. Isoprenoid synthesis provides substrate for protein prenylation, for example prenylated proteins driving haemoglobin vesicular trafficking. Recently, it was proposed that a defect in vesicular trafficking is involved in ART-resistance, especially the haemoglobin trafficking pathway, which correlated with K13 mutations and their effect on the transcriptome [22, 23]. It was found that K13 mutations altered multiple intra-erythrocytic development programs, which impact the cell cycle, unfolded protein response, protein degradation, vesicular trafficking and mitochondrial metabolism [23]. The gene knockout of Plasmodium-specific putative phosphoinositide-binding protein (PfPX1) was found to affect the haemoglobin trafficking pathway and made the parasite ART-resistant, suggesting that the haemoglobin trafficking pathway is an essential process for the ART-resistance mechanism. It was also shown that PfPX1 binds to phosphatidylinositol-3-phosphate (PI3P), a molecule that has already been shown to be affected by K13 mutation [15, 24]. Taken together, different Fd and ARPS10 alleles might affect the isoprenoid synthesis pathway that leads to insufficient substrates for vesicle formation, especially the haemoglobin vesicular trafficking pathway which is also affected by the K13 mutation and consequently enhances parasite ART-resistance. A future experiment to assess the importance of the isoprenoid synthesis pathway would be to examine the ring survival rate of the KMTFMTAMT parasite line in the presence of isopentenyl pyrophosphate (IPP), an isoprenoid precursor that can rescue parasites from lethal apicomplast dysfunction.
Availability of data and materials
All plasmids and transgenic P. falciparum parasites described in this study are available upon request.
References
Fairhurst RM, Dondorp AM. Artemisinin-resistant Plasmodium falciparum malaria. Microbiol Spectr. 2016;4. https://doi.org/10.1128/microbiolspec.El10-0013-2016.
Dondorp AM, Nosten F, Yi P, Das D, Phyo AP, Tarning J, et al. Artemisinin resistance in Plasmodium falciparum malaria. N Engl J Med. 2009;361:455–67.
Imwong M, Suwannasin K, Kunasol C, Sutawong K, Mayxay M, Rekol H, et al. The spread of artemisinin-resistant Plasmodium falciparum in the Greater Mekong subregion: a molecular epidemiology observational study. Lancet Infect Dis. 2017;17:491–7.
Murmu LK, Barik TK. An analysis of Plasmodium falciparum-K13 mutations in India. J Parasit Dis. 2022;46:296–303.
Ariey F, Witkowski B, Amaratunga C, Beghain J, Langlois AC, Khim N, et al. A molecular marker of artemisinin-resistant Plasmodium falciparum malaria. Nature. 2014;505:50–5.
Miotto O, Amato R, Ashley EA, MacInnis B, Almagro-Garcia J, Amaratunga C, et al. Genetic architecture of artemisinin-resistant Plasmodium falciparum. Nat Genet. 2015;47:226–34.
Zaw MT, Lin Z, Emran NA. Importance of kelch 13 C580Y mutation in the studies of artemisinin resistance in Plasmodium falciparum in Greater Mekong Subregion. J Microbiol Immunol Infect. 2020;53:676–81.
Yeh E, DeRisi JL. Chemical rescue of malaria parasites lacking an apicoplast defines organelle function in blood-stage Plasmodium falciparum. PLoS Biol. 2011;9:e1001138.
Straimer J, Gnadig NF, Witkowski B, Amaratunga C, Duru V, Ramadani AP, et al. Drug resistance. K13-propeller mutations confer artemisinin resistance in Plasmodium falciparum clinical isolates. Science. 2015;347:428–31.
Knuepfer E, Napiorkowska M, van Ooij C, Holder AA. Generating conditional gene knockouts in Plasmodium - a toolkit to produce stable DiCre recombinase-expressing parasite lines using CRISPR/Cas9. Sci Rep. 2017;7:3881.
Witkowski B, Amaratunga C, Khim N, Sreng S, Chim P, Kim S, et al. Novel phenotypic assays for the detection of artemisinin-resistant Plasmodium falciparum malaria in Cambodia: in-vitro and ex-vivo drug-response studies. Lancet Infect Dis. 2013;13:1043–9.
Wang J, Huang Y, Zhao Y, Ye R, Zhang D, Pan W. Introduction of F446I mutation in the K13 propeller gene leads to increased ring survival rates in Plasmodium falciparum isolates. Malar J. 2018;17:248.
Kimata-Ariga Y, Yuasa S, Saitoh T, Fukuyama H, Hase T. Plasmodium-specific basic amino acid residues important for the interaction with ferredoxin on the surface of ferredoxin-NADP + reductase. J Biochem. 2018;164:231–7.
Kimata-Ariga Y, Morihisa R. Functional analyses of plasmodium ferredoxin Asp97Tyr mutant related to artemisinin resistance of human malaria parasites. J Biochem. 2021;170:521–9.
Paloque L, Ramadani AP, Mercereau-Puijalon O, Augereau JM, Benoit-Vical F. Plasmodium falciparum: multifaceted resistance to artemisinins. Malar J. 2016;15:149.
Mbengue A, Bhattacharjee S, Pandharkar T, Liu H, Estiu G, Stahelin RV, et al. A molecular mechanism of artemisinin resistance in Plasmodium falciparum malaria. Nature. 2015;520:683–7.
Siddiqui FA, Boonhok R, Cabrera M, Mbenda HGN, Wang M, Min H, et al. Role of Plasmodium falciparum Kelch 13 protein mutations in P. falciparum populations from Northeastern Myanmar in mediating artemisinin resistance. mBio. 2020;11:e01134-19.
Stokes BH, Dhingra SK, Rubiano K, Mok S, Straimer J, Gnädig NF, et al. Plasmodium falciparum K13 mutations in Africa and Asia impact artemisinin resistance and parasite fitness. Elife. 2021;10:e66277.
Schumann R, Bischoff E, Klaus S, Möhring S, Flock J, Keller S, et al. Protein abundance and folding rather than the redox state of Kelch13 determine the artemisinin susceptibility of Plasmodium falciparum. Redox Biol. 2021;48:102177.
Qidwai T, Jamal F, Khan MY, Sharma B. Exploring drug targets in isoprenoid biosynthetic pathway for Plasmodium falciparum. Biochem Res Int. 2014;2014:657189.
Gisselberg JE, Dellibovi-Ragheb TA, Matthews KA, Bosch G, Prigge ST. The Suf Iron-Sulfur cluster synthesis pathway is required for apicoplast maintenance in malaria parasites. PLoS Pathog. 2013;9:e1003655.
Birnbaum J, Scharf S, Schmidt S, Jonscher E, Hoeijmakers WAM, Flemming S, et al. A Kelch13-defined endocytosis pathway mediates artemisinin resistance in malaria parasites. Science. 2020;367:51–9.
Mok S, Stokes BH, Gnädig NF, Ross LS, Yeo T, Amaratunga C, et al. Artemisinin-resistant K13 mutations rewire Plasmodium falciparum’s intra-erythrocytic metabolic program to enhance survival. Nat Commun. 2021;12:530.
Mukherjee A, Crochetière M-È, Sergerie A, Amiar S, Thompson LA, Ebrahimzadeh Z, et al. A phosphoinositide-binding protein acts in the trafficking pathway of hemoglobin in the malaria parasite Plasmodium falciparum. mBio. 2022;13:e03239-21.
Acknowledgements
T.K. was funded by The Royal Golden Jubilee Ph.D. Programme (NSTDA), Thailand Research Fund (PHD/0234/2558) and the Faculty of Medicine research fund, Chiang Mai University, Thailand (05293, 113/2561). Work in the Holder laboratory was funded by the Francis Crick Institute (FC001097), which receives its core funding from Cancer Research UK (FC001097), the UK Medical Research Council (FC001097), and the Wellcome Trust (FC001097); This research was funded in whole, or in part, by the Wellcome Trust (FC001097), the National Center for Genetic Engineering and Biotechnology, and Thailand Research Fund (RSA5880064), and the National Science and Technology Development Agency (P1450883, P1850116). For Open Access, the author has applied a CC BY public copyright licence to any Author Accepted Manuscript version arising from this submission.
Author information
Authors and Affiliations
Contributions
TK, AAH, CU, JLG, PJS: conceptualised and designed experiments; TK: performed experiments; JLG, EK, PP: provided reagents and methodology; TK, AAH, CU, PJS: analysed the data; AAH, SS, CU: acquired funding and supervised the work; TK, AAH: wrote initial manuscript draft; all authors reviewed manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare that they have no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Additional file 1: TableS1
Oligonucleotides used to generate guide RNA, primers in PCR analysis ofparasite genetic modification and primers for sequence confirmation.
Additional file 2: Table S2.
The sequences of designed elements (HR1-Recodonized part-HR2) of therepair plasmids for each mutagenesis.
Additional file 3: Fig.S1.
Graphscomparing the percentage of the different stages and results of the statisticalanalysis using one-way ANOVA with Dunnett's multiple comparisons test of mock(DMSO), 20 nM DHA and 700 nM DHA treatments. T-S; trophozoite to schizontstage, R; ring stage.
Additional file 4: Fig. S2.
Sequence analysis demonstratingthe presence of fd-D193Y (upper) and arps10-V127M (lower) alleles in the MRA1240parasite line. The mutant codons are enclosed in thered box, compared with the 3D7 reference line.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Kampoun, T., Srichairatanakool, S., Prommana, P. et al. Apicoplast ribosomal protein S10-V127M enhances artemisinin resistance of a Kelch13 transgenic Plasmodium falciparum. Malar J 21, 302 (2022). https://doi.org/10.1186/s12936-022-04330-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12936-022-04330-3