Abstract
Background
Amphiphilic peptides are important building blocks to generate nanostructured biomaterials for drug delivery and tissue engineering applications. We have shown that the self-assembling peptide SA2 (Ac-AAVVLLLWEE) can be recombinantly produced in E. coli when fused to the small ubiquitin-like modifier (SUMO) protein. Although this system yielded peptides of high purity with no residual amino acids after cleavage of the SUMO fusion protein, the yield after purification was generally low (~1 mg/L bacterial culture) as compared to other peptides and proteins produced with the same method and under the same conditions.
Results
The aim of this study is to understand the underlying mechanisms causing the low yield of this recombinant peptide in E. coli and to optimize both production and purification of recombinant SA2 peptides. It was demonstrated that by simply changing the medium to a well-balanced auto-induction medium the yield of recombinant production was augmented (~4 fold). Moreover, it was demonstrated that self-assembly of SUMO-SA2 fusion proteins caused the low peptide yields after purification. By replacing the second IMAC purification step with a selective precipitation step, peptide yields could be increased approx. 3 fold. With these optimizations in place the overall yield of purified SA2 peptide increased with 12-fold.
Conclusion
Premature self-assembly of the SUMO-SA2 fusion construct interfered with proper purification of the SA2 peptide, resulting in low yields of purified peptide and this could be prevented by changing the mode of purification. These findings are important when setting up purification schemes for other self-assembling peptides with the use of a SUMO fusion construct.
Similar content being viewed by others
Introduction
Amphiphilic peptides (Aps) represent a group of small peptides with sequestered hydrophobic and hydrophilic domains. Their amphiphilic nature allows them to self-assemble into supramolecular structures, such as micelles, nanotubes, belts or vesicles with interesting applications in drug delivery and tissue engineering [1-10].
Aps are produced by solid-phase peptide synthesis (SPPS) [11,12] but also recombinantly in bacteria and yeast [13-16]. Production of Aps via SPPS has some limitations. The presence of large stretches of hydrophobic amino acids in Aps may cause collapse of the peptides on the solid support, which increases the risk of truncated peptides that even become more problematic in large scale synthesis [17]. Such truncated peptides which often differ in only one amino acid from the full length peptide, are difficult to remove during subsequent purification steps. It was shown that such impurities can have profound effects on the self-assembling behavior of these Aps [17]. Besides purity, high scale production of SPPS is costly [18,19].
Numerous attempts have been made for recombinant production of relatively small, self-assembling peptides. However, such methods have encountered several challenges: their amphiphilic nature and tendency to self-assemble can cause toxicity problems in the production cells or can lead to proteolytic degradation or sequestering in inclusion bodies [20]. To prevent this, APs are often fused to a larger chaperone proteins [21].
One such fusion construct that favors soluble production of small hydrophobic peptides is the small ubiquitin-like modifying protein (SUMO) [21]. It can protect the protein/peptide by using its chaperoning properties, enhance the solubility and increase production [20]. This relatively small fusion protein (12.2 KD) can be specifically cleaved and separated from its fused partner by SUMO protease [22]. An important advantage of the SUMO fusion protein technology is that it generates peptides with a native N-terminus without residual amino acids after cleavage with SUMO protease [22,23]. In previous studies, we have used the SUMO fusion technology for the recombinant production and purification of a 10 amino-acid amphiphilic peptide called SA2 (AAVVLLLWEE) in E. coli [6]. The fusion protein consisted of a 6 residue histidine tag at the N-terminus for purification, SUMO for stability and solubility and the SA2 peptide at the C-terminus. Cleavage of the fusion protein with SUMO protease enabled the release of SA2 without any residual amino acids (Figure 1). Since SA2 self-assembles into nanovesicles, the SUMO fusion technology was used to prevent premature self-assembly of the peptides into supramolecular structures and to keep the monomeric peptide soluble during recombinant production. Although we succeeded to purify SA2 peptides following this approach, the yield was rather low, with approximately 1 mg of purified SA2 peptide/L bacterial culture.
In this study, the aim was therefore to determine and optimize the critical steps in the production and purification scheme of SA2 that limits the purified peptide yield and to maximize production yields of SA2 peptide.
Results and discussion
Peptide biosynthesis
To increase the yield of purified recombinant SA2, we first focused on the optimization of production of SUMO-SA2 in E. coli. Production of potentially toxic proteins generally does not benefit from the use of strong promoters to maximize transcription levels. Instead, tight control over the induction of expression is necessary to prevent premature expression and subsequent toxicity to the host. Strategies that enable induction of expression at high cell densities using auto-induction medium have been used to yield good levels of recombinant proteins [24]. Moreover, auto-induction media have the added advantage of very low to no expression prior to the time of induction because of the catabolyte repression effect of glucose, which makes it particularly suitable for the expression of potentially toxic recombinant proteins [25]. Here, we tested two different media for recombinant production of SA2: 1). Standard LB medium with IPTG as irreversible inducer of SUMO-SA2 expression under control of the T7lac promoter, and 2). ZYM medium, which leads to auto-induction of SUMO-SA2 expression based on glucose as preferable carbon source for E. coli. A restricted concentration of glucose not only is consumed preferentially during growth but also inhibits uptake of lactose. After consumption and depletion of glucose to reach a high cell density, lactose will be taken up and converted to the allolactose which is an inducer for T7 RNA polymerase expression under control of the lacUV5 promoter and unblocks the T7lac promoter, leading to high levels of expression [24]. A 5 ml overnight culture of E. coli was diluted in 1000 ml of LB or ZYM medium followed by incubation at 37°C in a shaking incubator. OD600 was monitored for LB medium and IPTG was added when the OD600 was ~0.4. Four hrs after induction with IPTG (in case of LB medium) and 16 hrs after inoculation (in case of ZYM medium) the wet weight of the bacterial pellet was determined (Table 1). A higher biomass (~3.5 fold) was reached using the ZYM autoinduction medium in comparison with IPTG induction in LB medium [24].
SUMO-SA2 purification
After induction, E.coli cells were harvested and lysed. Cleared lysate was used for further purification of the SUMO-SA2 construct using Ni2+-NTA immobilized metal affinity chromatography. Eluted proteins were subjected to a buffer exchange with HEPES, pH 8.0 using a Hiprep 26/10 desalting column. Determination of total amount of SUMO-SA2 after desalting based on its extinction coefficient at 280 nm (6990 M−1 cm−1) indicated higher protein yield per volume (~3.8 time) using the ZYM autoinduction medium in comparison with IPTG induction in LB medium (Table 1).
SDS-PAGE analysis of SUMO-SA2 before and after desalting showed a major protein band with good purity at 16 kD and a smaller, less intense band at 14 kD) (Figure 2). Further analysis of the purified and desalted SUMO-SA2 with size exclusion chromatography revealed two peaks (Figure 3, dashed line), of which the first peak eluted in the void volume of the column with a retention volume of 7.5 ml. The second peak eluted at 11.2 ml, with the same retention volume of a 14 kD globular protein (ribonuclease A). This indicated that SUMO-SA2 was present in monomeric as well as aggregated form. This can be explained by the hydrophobic nature of SA2 peptide causing the formation of aggregates. We assumed that the attachment of SUMO would prevent premature self-assembly of SA2 in bacteria, allowing us to purify the soluble fusion protein directly from the cleared lysates in a two-step metal affinity chromatography purification [6,20].
SDS-PAGE analysis of purified SUMO-SA2. Lane 1: 3 μl PageRuler™ Prestained Protein Ladder (Fermentas, Vilnius, Lithuania). Lane 2: 25 μl of purified SUMO-SA2 before desalting. Lane 3: same as lane 2, but 10x diluted in sample buffer. Lane 3: 25 μl of purified SUMO-SA2 after desalting. Lane 4: same as lane 3 but 10x diluted in sample buffer.
Here we showed that the presence of the SUMO fusion protein, although beneficial for expression levels of the SA2 peptide, did not completely prevent premature aggregation of the peptide-fusion construct.
SUMO-SA2 cleavage
Next, SUMO-SA2 was cleaved with SUMO protease to release the SA2 peptide from the SUMO protein. SUMO protease was added to the SUMO-SA2 solution at a mass ratio of 1:500, and the mixture was incubated at 30°C for 6 hrs with gentle shaking. To monitor the enzymatic cleavage of SUMO-SA2, analytical size exclusion chromatography (SEC) was used (Figure 3, solid line). Before cleavage of SUMO-SA2, two peaks can be discerned, with the first peak eluting in the void volume of the SEC column and the second peak corresponding with monomeric SUMO-SA2. SDS-PAGE analysis confirmed that both peaks consisted of SUMO-SA2 only, suggesting that the first peak consists of a multimeric or aggregated form of SUMO-SA2. As expected, after cleavage a third peak at a retention volume of 15.9 ml appeared, which contained full length SA2 (as confirmed by mass spectrometry). Furthermore, after cleavage an increase in the area under the curve (AUC) of peak 1 and a decrease of AUC of peak 2 were observed, suggesting an increase in protein in the multimeric or aggregated form after cleavage.
To determine the composition of these aggregates, peak 1 was collected and again injected into the column. Interestingly, this fraction divided into three peaks, with the main part being monomeric SA2 peptide (Figure 4, dashed line). This demonstrated that the aggregate peak consisted of a mixture of SA2 and SUMO-SA2. In an attempt to dissolve the aggregates, we raised the pH of the sample and mobile phase to 11.5 prior to separation.
Size exclusion chromatography analysis of cleaved SUMO-SA2 in phosphate buffered saline (pH = 7.4) Chromatogram showed three main peaks (solid line). After collection and reinjection of the first peak the same three peaks appeared (dashed line). This indicates that the first peak contained complex aggregates of SUMO-SA2 and SA2.
As shown in Figure 5A, SEC analysis was performed with phosphate buffered saline (pH 11.5) as the mobile phase. Interestingly, the AUC for the SA2 peptide peak clearly increased, while the AUC of the first peak simultaneously reduced, which showed that increasing the pH could dissolve the major part of the aggregates. This finding revealed that at high pH, the portion of SA2 peptides in a soluble, monomeric state was higher and consequently purification could be done more easily.
Peptide purification
The original purification scheme for SUMO-SA2 entailed a two-step IMAC purification scheme in which the first step was the purification of SUMO-SA2 fusion protein from the cleared lysate. After cleavage of the purified SUMO-SA2 with SUMO protease, the His-tagged SUMO was separated from the released peptide by a second IMAC step. However, we observed that mixtures of uncleaved SUMO-SA2 and cleaved SA2 can form aggregates, which caused loss of the SA2 product during the second purification step (Figure 6). For that reason we adapted the purification scheme.
Schematic representation of IMAC purification and the peptide loss in 2 nd IMAC purification after cleavage of SUMO-SA2 by SUMO protease. Released peptides are able to form aggregates with cleaved or uncleaved SUMO-SA2. Collected peptide in the flow through is low and most peptides stick to the column through the His tag of bigger proteins.
To separate the cleaved peptide from the SUMO protein, selective precipitation was applied. The pH of the protein solution after cleavage was adjusted to pH 11.5. SUMO, SUMO protease and uncleaved SUMO-SA2 were selectively precipitated by adding ethanol up to 50% (v/v) to the protein solution.
SEC analysis of the supernatant showed a major peak in the chromatogram, corresponding to the SA2 peptide which was confirmed by mass spectrometry (M.W. 1142.65 Da) (Figure 7A,C). To determine the yield of purification, the precipitate obtained after centrifugation was collected and resuspended in the same buffer and volume and analyzed by SEC. The chromatogram showed separation of most of the big proteins and aggregates and also some parts of SA2 (Figure 7B).
Peptide purification after enzymatic cleavage through selective precipitation. Selective precipitation was performed by adding ethanol up to 50% (v/v). A) Analysis of supernatant showed 1 major peak corresponding to SA2 B) SEC analysis of cleaved SUMO-SA2 before (solid line) and after (dashed line) selective precipitation. C) ESI-MS mass spectrum of the SA2 peptide in the supernatant after ethanol precipitation.
A comparison of the AUCs of the SA2 peptide peaks before and after ethanol precipitation revealed that 75% of the peptide was recovered in the supernatant (Table 1), and almost all other proteins were removed by ethanol precipitation.
Conclusion
In conclusion, the results of this study demonstrated that premature self-assembly of SUMO-SA2 interfered with the proper purification of SA2 peptides resulting in low yields of purified peptide. By refining the purification procedure and by altering the expression medium, we demonstrated a more than 12-fold increase in purified SA2 peptide from one liter of bacterial culture. Although these findings are specific for the purification of SA2 peptides, premature self-assembly during recombinant production may also take place with other amphiphilic peptides, which may to a certain extent explain the low yields reported for the recombinant production and purification of such self-assembling peptides [21,26,27]. A critical evaluation of the purification scheme of such peptides may therefore be advisable.
Materials and methods
Materials
All chemicals and media were from Sigma-Aldrich (ST.Louis, USA), unless indicated otherwise. Bicinchoninic acid (BCA) assay reagent was from Pierce (Rockford, IL, U.S.A.). DNAse I was from Roche Diagnostics (Mannheim, Germany) and chicken egg white lysozyme was obtained from Fluka (Buchs, Switzerland; 84,468 U/mg). Hiprep 26/10 desalting and Superdex Peptide 10/300 columns were purchased from GE Healthcare, (Uppsala, Sweden). PageRuler™ Prestained Protein Ladder was from (Fermentas, Vilnius, Lithuania). Phosphate buffer saline (PBS) was obtained from Braun (Melsungen AG, Germany).
Bacterial strains and plasmids
Escherichia coli BL21 (DE3) containing the T7 RNA polymerase under control of the lacUV5 promoter was purchased from Invitrogen (Breda, The Netherlands). BL21 (DE3) was transformed with pET-SUMO-SA2 [6] and pSUPER-dtUD1 constructs (kindly donated by Prof. Patrick J. Loll) [28] separately according to the pET-SUMO supplier protocol (Invitrogen, Carlsbad, USA). Briefly, 6.5 ng of the plasmid DNA was added to 50 μl of chemically competent E.coli BL21 (DE3) in a Eppendorf tube and shaken gently. The tube was put on ice for 30 min after which the cells were placed in a water bath of 42°C for 30 sec. Next, the tube was placed on ice. For recovery of cells, 250 μl of SOC medium was added to the tube. To make a stock for the transformed E.coli bacteria, 100 μl of the bacterial suspension was transferred into a LB plate containing 50 μg/ml of kanamycin and incubated at 37°C overnight. A single colony was selected and grown in 5 ml LB overnight. The overnight grown bacteria were cooled on ice and glycerol was added up to 30% of final volume before storage at −80°C.
Peptide biosynthesis
Media composition and protein expression
LB medium (peptone; 10 g/L, yeast extract; 5 g/L and 10 g/L of NaCl) was used for the pre-culture preparation and expression of SUMO-SA2 and SUMO protease (dtUD1). Auto induction medium (ZYM) was made according to the Studier method [24] and was used for SUMO-SA2 expression. In short, 1 L of ZYM medium that contained Tryptone (10 g/l), Yeast Extract (5 g/l), MgSO4 (1 mM), 20 mL of 50 × 5052 solution (glycerol 250 g/l, glucose 25 g/l, alpha lactose 100 g/l in RO water), kanamycin (100 mg/l) and 50 ml of 20× NPS solution ((NH4)2SO4 (66 g/l), KH2PO4 (136 g/l), Na2HPO4 (142 g/l). One liter of autoclaved ZYM or LB media was inoculated with 5 ml of overnight seed culture of the transformed E. coli strain BL21 (DE3). LB medium was incubated in a shaking incubator (Innova 4335, New Brunswick Scientifc,USA) at 37°C/250 rpm and induced with 1 mM IPTG when the culture reached OD600 = 0.6-0.8. Next, bacteria were harvested after 4 hrs by centrifugation at 5,000× g for 30 min at 4°C. Inoculated autoinduction medium was shaken at 37°C/250 rpm and bacteria were collected after 16 hrs at 5,000× g for 30 min at 4°C.
Purification of SUMO-SA2
For the isolation and purification of the SA2 peptide, bacterial pellets were suspended in the lysis buffer (3 ml for each gram of biomass) (20 mM Na2HPO4, 150 mM NaCl, 20 mM imidazole, 5 mM MgCl2 1.5% N-lauroylsarcosine, pH 8) supplemented with DNAse I 1 μg/ml and chicken egg white lysozyme 300 μg/ml. The resulted suspension was incubated on ice for 30 min. Subsequently, urea was added to the suspension to achieve 4 M final concentration. Lysis was accomplished using a Braun Labsonic tip-sonicator (Braun Biotech, Melsungen, Germany) for 5 min with 30 second stop between each 30 second pulse and passing two times through high pressure homogenizer. Next, the cell lysate was centrifuged (30 minutes, 40.000 g, 20°C) and supernatant was filtered through a 0.45 μm filter. SUMO-SA2 was purified by affinity chromatography using a 50 ml packed column of Ni-NTA Superflow (Qiagen, Chatsworth, CA) attached to an AKTA Purifier (GE Healthcare, Uppsala, Sweden). The column was washed with 5 column volumes of binding buffer (20 mM sodium phosphate, 0.5 M NaCl, 40 mM imidazole, pH 8) after which the cleared lysate was loaded onto a 50 ml packed Ni2+-NTA column at 0.5 ml/min at room temperature. After loading the cleared lysate, the column was washed with the binding buffer until the A280 reached to the baseline. His-tagged proteins were eluted from the column with elution buffer (20 mM sodium phosphate, 0.5 M NaCl, 500 mM imidazole, pH 8).
To remove excess imidazole and NaCl, the elution buffer was exchanged with cleavage buffer (20 mM hepes, 150 mM NaCl, pH 8.0) by loading onto a Hiprep 26/10 desalting column.
As the molecular weight of SA2 peptide (1.142 KD) is 8% of the molecular weight of the SUMO-SA2 (14295 KD), the highest expected amount of SA2 that can be released after enzymatic cleavage can be calculated.
Purification of SUMO protease
The same protocol as described above was used for the purification of SUMO protease without addition of urea. Moreover, the elution buffer was replaced by the storage buffer (50 mM NaH2PO4, 300 mM NaCl, 1 mM DTT, pH 8.0) prior to protein quantification using the BCA assay which BSA used as a standard. Finally, 0.2 mg/ml dilutions were made by adding glycerol 50% (v/v) and stored at −80°C until required.
Purification of SA2 peptide
SUMO protease was added at a 1:500 molar ratio to the purified SUMO-SA2 solution supplemented with 1 mM DTT and the mixture was incubated under gentle shaking for 6 hrs at 30°C to allow SUMO cleavage from the SA2 peptide.
To separate SA2 peptide from cleaved SUMO, SUMO protease and uncleaved SUMO-SA2, selective precipitation by ethanol was performed.
The pH of protein solution after cleavage was adjusted to 11.5 then ethanol was added up to 50% of the total volume to precipitate all proteins except SA2. After centrifugation at 5000xg at 4°C for 15 min, supernatant was collected and pH of supernatant was adjusted to 2 by adding 1 M HCl to precipitate SA2. The precipitate was collected and suspended in 0.1 M HCl and centrifuged at 5000× g at 4°C. This procedure was repeated 3 times.
Subsequently, recovered peptide was confirmed by HPLC, and mass spectrometry. Finally the peptide pellet was lyophilized at −50°C and at 0.5 mbar in a Chris Alpha 1–2 freeze-drier (Osterode am Harz, Germany) for 12 hrs and stored at −20°C.
Characterization of produced peptide
Gel electrophoresis
The produced proteins were evaluated by SDS-PAGE. Samples were boiled in Laemmli sample buffer (Bio-Rad Laboratories, Hercules, CA, USA) for 5 min and loaded at 20 μl/well onto NuPAGE 10% Novex Bis-Tris gels (12 wells, 1.0-mm thickness; NuPAGE, Invitrogen, Carlsbad, CA, USA). Electrophoresis was performed at room temperature applying a constant voltage of 175 V for 50 min. The gel was stained with Page Blue™ Protein Staining Solution (Fermentas GMBH, St. Leon-Rot, Germany) and destained overnight by washing with RO water.
Size exclusion chromatography
Cleavage of SUMO-SA2 was followed by Size Exclusion Chromatography on a Superdex Peptide 10/300 GL column at a flow rate of 0.7 ml/min with phosphate buffered saline at pH = 7.4 or pH = 11.5 as the mobile phase. Prior to loading the samples a Gel Filtration LMW Calibration kit (GE Healthcare, Uppsala, Sweden) was used to validate column performance.
HPLC analysis and mass spectrometry
1 mg of Lyophilized SA2 peptide was dissolved in 1 ml of DMSO and 20 μl of the peptide solution was diluted 5 times in RO water. 50 μl of prepared sample was injected onto a Sunfire C18 column (waters Corporation, Milford, USA). A gradient was run at 1.0 ml/min flow rate from buffer A (5% actonitrile, 0.1% trifluoroacetic acid, 95% water) in 30 minutes to buffer B (100% acetonitrile, 0.1% trifluoroacetic acid). UV absorption was monitored at 220 nm, 280 nm and also fluorescent emission at 350 nm of tryptophan residue upon excitation at 295 nm was recorded.
Furthermore, Electrospray ionization (ESI) mass spectrometry was carried out using a Shimadzu LCMS QP-8000(Duisburg, Germany) single quadrupole bench top mass spectrometer (m/z range, 2000), coupled with a QP-8000 data system.
Abbreviations
- A280:
-
Absorbance at 280 nm
- Aps:
-
Amphiphilic peptides
- AUC:
-
Area under the curve
- BSA:
-
Bovine serum albumin
- DMSO:
-
Dimethylsulfoxide
- DNase:
-
Deoxyribonuclease
- DTT:
-
Dithiothreitol
- E.coli:
-
Escherichia coli
- G:
-
Relative centrifugation force to gravity
- HEPES:
-
4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid
- His6:
-
Hexa-histidine tag
- HPLC:
-
High-performance liquid chromatography
- IMAC:
-
Immobilized-metal affinity chromatography
- IPTG:
-
Isopropyl-β-D-thiogalactopyranoside
- LB-medium:
-
Luria-Bertani medium
- Ni-NTA:
-
Nickel-nitriloacetic acid
- OD600:
-
Optical density at 600 nm
- RNase:
-
Ribonuclease
- RO water:
-
Reverse osmosis water
- Rpm:
-
Round per minute
- SDS-PAGE:
-
Sodium dodecyl sulphate-polyacrylamide gel electrophoresis
- SEC:
-
Size exclusion chormatography
- SOC:
-
Medium super optimal broth medium + glucose
- SUMO:
-
Small ubiquitin-like modifier
References
Vauthey S, Santoso S, Gong H, Watson N, Zhang S: Molecular self-assembly of surfactant-like peptides to form nanotubes and nanovesicles. Proc Natl Acad Sci U S A 2002, 99:5355–5360.
Santoso S, Hwang W, Hartman H, Zhang S: Self-assembly of Surfactant-like peptides with variable glycine tails to form nanotubes and nanovesicles. Nano Lett 2002, 2:687–691.
Khoe U, Yang Y, Zhang S: Self-assembly of nanodonut structure from a cone-shaped designer lipid-like peptide surfactant†. Langmuir 2008, 25:4111–4114.
Khoe U, Yang Y, Zhang S: Synergistic effect and hierarchical nanostructure formation in mixing two designer lipid-like peptide surfactants Ac-A6D-OH and Ac-A6K-NH2. Macromol Biosci 2008, 8:1060–1067.
Chen C, Pan F, Zhang S, Hu J, Cao M, Wang J, Xu H, Zhao X, Lu JR: Antibacterial activities of short designer peptides: a link between propensity for nanostructuring and capacity for membrane destabilization. Biomacromolecules 2010, 11:402–411.
Van Hell AJ, Costa CI, Flesch FM, Sutter M, Jiskoot W, Crommelin DJ, Hennink WE, Mastrobattista E: Self-assembly of recombinant amphiphilic oligopeptides into vesicles. Biomacromolecules 2007, 8:2753–2761.
Schuster TB, de Bruyn Ouboter D, Bordignon E, Jeschke G, Meier W: Reversible peptide particle formation using a mini amino acid sequence. Soft Matter 2010, 6:5596.
Guo XD, Tandiono F, Wiradharma N, Khor D, Tan CG, Khan M, Qian Y, Yang YY: Cationic micelles self-assembled from cholesterol-conjugated oligopeptides as an efficient gene delivery vector. Biomaterials 2008, 29:4838–4846.
Maham A, Tang Z, Wu H, Wang J, Lin Y: Protein-based nanomedicine platforms for drug delivery. Small 2009, 5:1706–1721.
Stupp SI, Zha RH, Palmer LC, Cui H, Bitton R: Self-assembly of biomolecular soft matter. Faraday Discuss 2013, 166:9–30.
Corin K, Baaske P, Ravel DB, Song J, Brown E, Wang X, Wienken CJ, Jerabek-Willemsen M, Duhr S, Luo Y, Braun D, Zhang S: Designer lipid-like peptides: a class of detergents for studying functional olfactory receptors using commercial cell-free systems. PLoS One 2011, 6:e25067.
Gudlur S, Sukthankar P, Gao J, Avila LA, Hiromasa Y, Chen J, Iwamoto T, Tomich JM: Peptide nanovesicles formed by the self-assembly of branched amphiphilic peptides. PLoS One 2012, 7:e45374.
Merrifield RB: Solid phase peptide synthesis. I. the synthesis of a tetrapeptide. J Am Chem Soc 1963, 85:2149–2154.
Muller D, Bayer K, Mattanovich D: Potentials and limitations of prokaryotic and eukaryotic expression systems for recombinant protein production - a comparative view. Microb Cell Fact 2006, 5:P61.
Trabbic-Carlson K, Liu L, Kim B, Chilkoti A: Expression and purification of recombinant proteins from Escherichia coli: comparison of an elastin-like polypeptide fusion with an oligohistidine fusion. Protein Sci 2004, 13:3274–3284.
Pasupuleti M, Schmidtchen A, Malmsten M: Antimicrobial peptides: key components of the innate immune system. Crit Rev Biotechnol 2011, 32:143–171.
Adams DJ, Holtzmann K, Schneider C, Butler MF: Self-assembly of surfactant-like peptides. Langmuir 2007, 23:12729–12736.
Singh SM, Panda AK: Solubilization and refolding of bacterial inclusion body proteins. J Biosci Bioeng 2005, 99:303–310.
Hojo K, Hara A, Kitai H, Onishi M, Ichikawa H, Fukumori Y, Kawasaki K: Development of a method for environmentally friendly chemical peptide synthesis in water using water-dispersible amino acid nanoparticles. Chem Cent J 2011, 5:49.
Satakarni M, Curtis R: Production of recombinant peptides as fusions with SUMO. Protein Expres Purif 2011, 78:113–119.
Prakash A, Parsons SJ, Kyle S, McPherson MJ: Recombinant production of self-assembling β-structured peptides using SUMO as a fusion partner. Microb Cell Fact 2012, 11:92.
Malakhov M, Mattern M, Malakhova O, Drinker M, Weeks S, Butt T: SUMO fusions and SUMO-specific protease for efficient expression and purification of proteins. J Struct Funct Genomics 2004, 5:75–86.
Butt TR, Edavettal SC, Hall JP, Mattern MR: SUMO fusion technology for difficult-to-express proteins. Protein Expres Purif 2005, 43:1–9.
Studier FW: Protein production by auto-induction in high-density shaking cultures. Protein Expr Purif 2005, 41:207–234.
Novy R: Use of glucose to control basal expression in the pET system. Innov 2013, 13:13–15.
Reed DC, Barnard GC, Anderson EB, Klein LT, Gerngross TU: Production and purification of self-assembling peptides in Ralstonia eutropha. Protein Expr Purif 2006, 46:179–188.
Hartmann BM, Kaar W, Yoo IK, Lua LH, Falconer RJ, Middelberg AJP: The chromatography-free release, isolation and purification of recombinant peptide for fibril self-assembly. Biotechnol Bioeng 2009, 104:973–985.
Weeks SD, Drinker M, Loll PJ: Ligation independent cloning vectors for expression of SUMO fusions. Protein Expr Purif 2007, 53:40–50.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Acknowledgements
We gratefully acknowledge Georgi Nadibaidze for his excellent technical assistance. This work was partially supported by Iranian ministry of health and medical education.
Authors’ contributions
MR-M and MF performed all the experiments. MR-M and EM drafted the manuscript and EM and WEH supervised the project and revised the manuscript. All authors read and approved the final manuscript.
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Rad-Malekshahi, M., Flement, M., Hennink, W.E. et al. Optimization of the recombinant production and purification of a self-assembling peptide in Escherichia coli . Microb Cell Fact 13, 178 (2014). https://doi.org/10.1186/s12934-014-0178-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12934-014-0178-0