Abstract
Background
Vertebral bodies in patients with adolescent idiopathic scoliosis (AIS) usually have frontal wedge deformities. However, the plasticity of the deformed vertebrae in skeletally immature patients is unknown. The purpose of our study was to clarify the plasticity of vertebral deformities in skeletally immature patients with AIS by using in vivo three-dimensional (3D) analysis.
Methods
Ten female patients with AIS (mean age, 12.2 years; three patients, Lenke type 1; five patients, type 2; two patients, type 5) who underwent posterior fusion and whose Risser grade was ≤3 at surgery were included. Using computed tomography images (0.625-mm slice thickness) obtained 1 week and 1 year postoperatively, a total of seventy-three 3D bone models of vertebrae was made. The 3D bone models were made between the upper and lower end vertebrae within the main thoracic curve for patients with Lenke types 1 and 2 scoliosis, whereas they were made within the thoracolumbar/lumbar curve in patients with Lenke type 5 scoliosis. The height of the concave and convex sides in the anterior, middle and posterior parts of the vertebral bodies was measured using the original digital viewer, and the vertebral height ratio (VHR: concave/convex) was calculated. VHRs at 1 week and 1 year postoperatively were compared using the Wilcoxson signed-rank test. Differences were considered statistically significant at p < 0.05.
Results
VHR of the end vertebrae (n = 20) did not change postoperatively for any parts of the vertebral bodies. VHR of the vertebrae in the apical region (n = 28) also remained unchanged postoperatively. In contrast, VHR of the other vertebrae (n = 25) increased significantly in the anterior part postoperatively (from 0.938 to 0.961, p = 0.006).
Conclusions
The wedge deformity of vertebral bodies showed a reshaping potential towards a symmetrical configuration in the region other than end and apex, although no plasticity of the vertebrae was observed in the apical region even in skeletally immature patients with AIS.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Background
Adolescent idiopathic scoliosis (AIS) is defined as scoliosis with an onset between ages 10 and 18 years [1, 2]. Although AIS is a relatively common spinal disorder affecting 1–3 % of children, its etiology remains unknown [1, 2]. Because the onset and progression of AIS is at or around puberty when the osseous growth of vertebrae occurs in spurts, the unbalanced axial load caused by primary scoliotic changes can affect the growth and morphology of adjacent vertebrae.
Recent morphological analysis of the vertebrae in patients with AIS revealed that the vertebral bodies have three-dimensional (3D) deformities (e.g. wedging and torsion) and that these deformities are primarily oriented in the frontal plane [3–6]. It is still controversial whether these deformities are secondary change caused by asymmetrical vertebral loading or primary changes caused by aberrant asymmetrical vertebral growth [7]. If deformities are secondary, reshaping of the vertebral bodies can occur postoperatively, which will remove asymmetrical loading. However, little is known about the plasticity of vertebral deformities in AIS.
Posterior corrective surgery in AIS attenuates the excessive axial loading in the concave side by restoring physiological vertebral alignment. We hypothesized that the secondary deformity caused by asymmetrical axial loading can be reshaped postoperatively in skeletally immature AIS patients. Therefore, the purpose of our study was to clarify the plasticity of vertebral wedge deformities in skeletally immature AIS patients using in vivo 3D analysis.
Methods
Our study was a retrospective review of a radiological database of patients with AIS who underwent corrective surgery, and was approved by the Research Ethics Committee of Osaka University Hospital (no. 15098).
We included 10 female skeletally immature patients (Risser grade ≤3) who underwent posterior corrective spinal fusion surgery for AIS between 2008 and 2012. The mean age at the time of the surgery was 12.2 years (range, 10–14 years). In brief, the surgical procedures were as follows. Only by posterior approach, instrumentation and correction of curve were performed. Unilateral pedicle hook placement at upper and middle thoracic spine and bilateral or unilateral pedicle screw insertion at lower thoracic and lumbar spine were performed. All the inferior articular processes within fusion segments were resected for posterior release. The correction of curve was performed by a rod rotation maneuver and distraction at the concave side, without direct vertebral rotation. All surgeries were performed by a single surgery team of our spine care unit. COLORADO 2TM Spinal System (Medtronic Sofamor Danek Inc., Memphis, TN) was used for all surgeries (Figs. 1 and 2).
Preoperative (a, b) and postoperative (c, d: 1 week postoperatively) full-length standing posteroanterior radiographs and 3D reconstructed CT images in the main thoracic curve of a 12-year-old female patient (Patient No. 5 in Table 1)
Preoperative (a, b) and postoperative (c, d: 1 week postoperatively) full-length standing posteroanterior radiographs and 3D reconstructed CT images in the main thoracic curve of an 11-year-old female patient (Patient No. 6 in Table 1). The 3D-CT images demonstrated that the opening of disc spaces in the apical region was observed at the concave side
Radiographic assessments
The type of scoliosis of each patient was classified according to Lenke classification on the basis of preoperative full-length standing posteroanterior and lateral radiographs [8]. If an apex was located at an inter-vertebral disc, the adjacent upper and lower vertebral bodies were defined as apical vertebrae. Cobb angles of the main thoracic (MT) and thoracolumbar/lumbar (TL/L) curves and Risser grades were digitally measured on a flat-panel monitor at our hospital using a built-in imaging software (Centricity WebDX; GE Healthcare Japan, Tokyo, Japan).
Computed tomography (CT) assessments
The patients underwent CT scans within 3 months preoperatively as well as 1 week and 1 year postoperatively. Aquilion ONETM (Toshiba Medical Systems Corporation, Tochigi, Japan) was used for the CT scans. The settings used for CT scans were a slice thickness of 0.5 mm, a tube voltage of 120 kV and a tube current of 60 mA. The mean dose length product per single CT scan was 365.66 ± 192.22 mGy · cm.
Segmentation and creation of a 3D bone surface model
The obtained image data of the CT scans, in Digital Imaging and Communications in Medicine standard format, were imported into a 3D image processing workstation (Synapse Vincent; Fujifilm Holdings Corporation, Tokyo, Japan). The segmentation and creation of a 3D bone surface model of each vertebra were performed semi-automatically. The contour of each vertebra was extracted at a threshold of 2000 Hounsfield units for window width and 150 Hounsfield units for window level, as has been previously described [9, 10]. The 3D models were made between the upper and lower end vertebrae within the MT curve for patients with Lenke types 1 and 2 scoliosis, whereas they were made within the TL/L curve in patients with Lenke type 5 scoliosis. As a result, 73 3D models of vertebrae was made. Thereafter, the vertebral bodies were extracted semi-automatically from the 3D models of the vertebrae by removing posterior elements at the transitions between the vertebral bodies and pedicles.
Measurement of vertebral height and vertebral angle
The following processing and measurements were performed semi-automatically using the original digital viewer (Orthopedic Viewer; Osaka University). The center of gravity of each vertebral body was calculated, and the vertical axis of each vertebral body was defined as the line containing the center of gravity that runs parallel to the line connecting the anterior edges of the vertebral foramen on the upper and lower vertebral end plates (Fig. 3). Sagittal planes of each vertebral body, which contained the center of gravity and anterior edges of the vertebral foramen on the upper and lower end plates, were made (Fig. 3), and were then rotated on the vertical axis at 45° intervals (Fig. 4). The intersection points of the rim of the lower endplate of each vertebral body and the rotated sagittal planes were then plotted (Fig. 4). The anterior two intersection points were used for assessing the anterior part of the vertebral body, the middle two intersection points for assessing the middle part and the posterior two intersection points for the posterior part (Fig. 4). Moreover, approximated planes of the upper and lower endplates of each vertebral body were made (Fig. 5). We measured and calculated the following parameters.
An example of the vertical axis and sagittal plane of a vertebral body. The vertical axis (arrow) was defined as the line containing the center of gravity (G) and parallel to the line connecting anterior edges of the vertebral foramen on the upper and lower vertebral end plates (a, b). The sagittal plane (c) contained the center of gravity and anterior edges of the vertebral foramen on the upper and lower end plates
The intersection points of the rim of the lower endplate of a vertebral body and the rotated sagittal plane. A sagittal plane (a) was rotated on the vertical axis at 45° intervals. The anterior two intersection points (ant.) were used for assessing the anterior part of the vertebral body, the middle two intersection points (mid.) for the middle part and the posterior two intersection points (post.) for the posterior part
-
Vertebral height (VH) and Vertebral height ratio (VHR)
VH was defined as the distance between each intersection point and the approximated plane of the upper vertebral end plate (Fig. 6). VHR, defined as the ratio of the VH of the concave side to that of the convex side, was used as the index of wedge deformity of the vertebral bodies in the coronal plane. VHR was assessed at the anterior, middle and posterior parts of each vertebral body, respectively. A value of VHR getting closer to 1 implies that the upper and lower endplates of the vertebral bodies in the coronal plane are closer to being parallel.
-
Disc opening angle (DOA)
As the index of the opening change of the discs in the coronal plane for each vertebral body at the concave side, DOA was measured as follows. First, the coronal plane of each vertebral body was made by rotating the sagittal plane of each vertebral body by 90° around the vertical axis. Then, in the coronal plane of the lower vertebral body adjacent to the disc, the angle between the approximated planes of the lower endplate of the upper vertebral body and the upper endplate of the lower vertebral body adjacent to the disc (‘plus’ indicates that the opening is at the convex side) was measured as the disc angle (Fig. 7). DOA was calculated using the following formula:
Fig. 7 An example of coronal disc angle (CDA). CDA (α) was defined as the angle in the coronal plane of the lower vertebral body adjacent to the disc (a), between the approximated planes of the lower endplate of the upper vertebral body (b) and the upper endplate of the lower vertebral body (c) adjacent to the disc
A higher DOA means that the discs adjacent to the vertebral body largely open at the concave side postoperatively.
Statistical analysis
The postoperative changes of VHR and DOA were analyzed statistically in end vertebrae (EV), vertebrae in the apical region (AV: an apical vertebra and adjacent upper and lower vertebrae. If an apex was located at an inter-vertebral disc, the upper and lower vertebrae adjacent to the disc were defined as AV), and the other vertebrae (OV: vertebrae other than EV and AV), respectively. Statistical analysis was performed using IBM SPSS Statistics Version 22 (IBM, Armonk, NY, USA). The Wilcoxson signed-rank test was used to compare VHR between 1 week and 1 year postoperatively. The Scheffe test was used to compare DOA among the EV, AV and OV. Intra-observer and inter-observer agreement for measurements of VH and disc angle were assessed with intra-class correlation coefficients based on the blinded evaluation of these parameters in two patients (VH, 120 points; disc angle, 18 discs). For the analysis of intra-observer reliability, the first author (T.M.) evaluated these parameters twice with a 2-week interval. For the analysis of inter-observer reliability, two spinal surgeons (T.M. with a 6-year experience of CT analysis of scoliosis, and Y.S. with a 3-year experience) evaluated these parameters. Differences were considered statistically significant at p < 0.05.
Results
Based on Lenke classification of AIS, three patients were type 1, five patients were type 2 and two patients were type 5. The mean Cobb angle of the MT curve in patients with type 1 and type 2 was 66.3° ± 19.4° (range, 39°–97°), and that of the TL/L curve in patients with type 5 was 56.5° ± 6.5° (range, 50°–63°). The mean Risser grade was 1.8 ± 1.2 (range, 0–3). The demographic data of each patient are shown in Table 1.
VHR of the EV (n = 20) did not change between 1 week and 1 year postoperatively for the anterior, middle and posterior parts of the vertebral bodies (Table 2, Fig. 8). VHR of the AV (n = 28), where the most severe wedge deformities were observed, did not change during the observation period (Table 2, Fig. 9). However, VHR in the OV (n = 25) significantly increased (i.e. remodeled towards a symmetrical configuration) between 1 week and 1 year postoperatively at the anterior part (from 0.938 to 0.961, p = 0.006, [1 - β] = 0.758) (Table 2, Fig. 10).
The changes of the vertebral height ratio (VHR) of the vertebrae other than the end vertebrae and vertebrae in the apical region (n = 25) between 1 week and 1 year postoperatively. VHR of the vertebrae other than the end vertebrae and vertebrae in the apical region at the middle and posterior part did not change postoperatively; however, VHR at the anterior part increased. (*p = 0.006)
DOA was -0.12° ± 2.70° at the EV, 6.01° ± 3.33° at the AV and 3.38° ± 2.30° at the OV. DOA at the AV was greater than that at the EV and OV (vs. EV, p < 0.001; vs. OV, p = 0.007). DOA at OV was also greater than that at the EV (p < 0.001).
Intra-class correlation coefficients for intra-observer and inter-observer reliabilities were 0.996 (95 % confidence interval, 0.994–0.997) and 0.990 (0.986–0.993) for VH, and 0.981 (0.951–0.993) and 0.960 (0.899–0.985) for disc angle, respectively.
Discussion
In accordance with our hypothesis, our study revealed that vertebrae with wedge deformities in skeletally immature AIS patients have remodeling potential towards a symmetrical configuration at the anterior part of the OV. However, remodeling was not observed at the AV where the wedge deformities were most severe, although distraction of the adjacent disc spaces at the concave sides was confirmed by the increased DOA.
It is well known that mechanical loading influences the longitudinal growth of the long bones and vertebrae. Growth is retarded by increased mechanical compression and accelerated by decreased loading, and this phenomenon is explained as the Hueter–Volkmann Law [11]. Using a rat-tail model, Stokes et al. [12] showed that the longitudinal growth of vertebrae was suppressed under compression force and accelerated under distraction force. In patients with scoliosis, asymmetrical loading in the inter-vertebral disc has been proved in vivo, and loading in the concave annulus has been shown to be greater than in the convex annulus [13, 14]. Therefore, in patients with scoliosis, this can cause a vicious cycle of asymmetrical loading and vertebral wedge deformities [7, 12]. Many researchers have shown that vertebral wedge deformities exist in patients with scoliosis [3–6, 15]. Recent 3D morphometric studies revealed that the severity of wedge deformities correlated with the Cobb angle and that this wedge deformity was greater in the apical region [4, 15].
It is unclear as to why reshaping of the wedged vertebrae did not occur in the apical region, even though more correction force was applied and the correction of the coronal curve as measured by DOA was not less than that in the other regions. One hypothesis is that the epiphyseal growth plate of a vertebral body can be injured at the concave side of the vertebrae at the apical lesion by excessive loading. In a morphometric study regarding vertebral wedge deformities in AIS, Modi et al. [15] suggested that the load distribution was concentrated maximally at the apex. A histomorphological study of spinal growth plates in AIS by Wang et al. [16] showed that no signs of growth activity were observed in the growth plates at the concave side of the apical vertebrae compared to the convex side of the apical vertebrae and the concave side of the upper or lower end vertebrae. They also showed that the proliferation and apoptosis of chondrocytes in the proliferative and hypertrophic zones were inhibited at the concave side of the apical vertebrae compared to the convex side of the apical vertebrae and the concave side of both the upper and lower end vertebrae. This supports our finding that reshaping did not occur at the apical wedged vertebrae.
Another hypothesis is that the loss of plasticity at the apical vertebrae in patients with AIS is caused by primary factors. GPR126 and BNC2 were reportedly two of the candidate susceptibility genes for AIS, and GPR126 knockdown or BNC2 overexpression in zebrafish has been shown to cause delayed ossification of the developing spine and scoliosis [17, 18]. Growth arrest at the epiphyseal growth plates at the concave side of the apical vertebrae in patients with AIS could be induced by the asymmetrical expression of some genes regulating spine ossification or some disorders such as osteochondrosis. Vertebral wedge deformities have been observed even in the early stages of mild scoliosis [5, 6]. This also supports the fact that primary factors can affect vertebral body growth in AIS.
Vertebral rotation is one of the concerns in vertebral morphometric studies on AIS. It is well known that the vertebrae in patients with AIS rotate in the axial plane and that the rotation increases gradually from neutral vertebrae to apical vertebrae [19, 20]. Recent studies have revealed that an increase in vertebral rotation in the thoracic spine could induce the loss of local kyphosis in the ‘true’ 3D sagittal plane [21, 22]. Using 3D analysis, Hattori et al. [23] showed that local lordosis could occur at the thoracic apical lesion. In our study, we defined the 3D sagittal plane of each vertebral body in order to consider vertebral rotation. Our study showed that VHR of the OV increased at the anterior part; however, VHR at the middle and posterior parts remained unchanged. This could be attributed to the posterior spinal fusion procedure. However, as described above, local lordosis or loss of local kyphosis can occur even in the thoracic spine in AIS, and these abnormal sagittal alignments could result in epiphyseal growth plate injury at the middle and posterior parts of the vertebral bodies according to scoliosis progression.
Though the post hoc analysis revealed that the statistical power (1 – β) in the analysis of the change of VHR in the OV at the anterior part was relatively high, the primary limitation of our study is the small sample size. Therefore, we were unable to show differences in the plasticity of the vertebral bodies between the thoracic spine and the lumbar spine. It is because skeletally immature patients with AIS often undergo anterior corrective fusion surgery, and patients who undergo only posterior corrective surgery are relatively rare. Moreover, the used implant and correction maneuver for scoliosis have been changed since 2013 in our institution. Because these changes could affect the morphology of vertebral bodies, the patients who underwent surgery after 2013 were excluded. Further prospective studies are needed to clarify this issue.
Conclusions
The wedge deformity of vertebral bodies in the coronal plane could be reshaped at the region other than the end and apex after posterior corrective surgery. In contrast, the vertebrae in the apical region had no plasticity even though more distraction force was applied to the concave side than the other regions. With regard to the clinical relevance of our findings, the evaluation of vertebral wedge deformities may represent a possible measure of the effect of brace treatments because the correction of asymmetrical loading to the vertebrae under brace treatments can induce vertebral reshaping in skeletally immature patients.
Abbreviations
- 3D:
-
Three-dimensional
- AIS:
-
Adolescent idiopathic scoliosis
- AV:
-
An apical vertebra and adjacent upper and lower vertebrae
- CT:
-
Computed tomography
- DOA:
-
Disc opening angle
- EV:
-
End vertebrae
- MT:
-
Main thoracic
- OV:
-
Vertebrae other than EV and AV
- TL/L:
-
Thoracolumbar/lumbar
- VH:
-
Vertebral height
- VHR:
-
Vertebral height ratio
References
Horne JP, Flannery R, Usman S. Adolescent idiopathic scoliosis: diagnosis and management. Am Fam Physician. 2009;89:193–8.
Weinstein SL, Dolan LA, Cheng JC, Danielsson A, Morcuende JA. Adolescent idiopathic scoliosis. Lancet. 2008;371:1527–37. doi:10.1016/S0140-6736(08)60658-3.
Parent S, Labelle H, Skalli W, de Guise J. Vertebral wedging characteristic changes in scoliotic spines. Spine (Phila Pa 1976). 2004;29:E455–62.
Schlösser TP, van Stralen M, Brink RC, Chu WC, Lam TP, Vincken KL, et al. Three-dimensional characterization of torsion and asymmetry of the intervertebral discs versus vertebral bodies in adolescent idiopathic scoliosis. Spine (Phila Pa 1976). 2014;39:E1159–66. doi:10.1097/BRS.0000000000000467.
Scherrer SA, Begon M, Leardini A, Coillard C, Rivard CH, Allard P. Three-dimensional vertebral wedging in mild and moderate adolescent idiopathic scoliosis. PLoS One. 2013;8:e71504. doi:10.1371/journal.pone.0071504.
Begon M, Scherrer SA, Coillard C, Rivard CH, Allard P. Three-dimensional vertebral wedging and pelvic asymmetries in the early stages of adolescent idiopathic scoliosis. Spine J. 2015;15:477–86. doi:10.1016/j.spinee.2014.10.004.
Sarwark J, Aubin CE. Growth considerations of the immature spine. J Bone Joint Surg Am. 2007;89 Suppl 1:8–13.
Lenke LG, Betz RR, Harms J, Bridwell KH, Clements DH, Lowe TG, et al. Adolescent idiopathic scoliosis: a new classification to determine extent of spinal arthrodesis. J Bone Joint Surg Am. 2001;83-A:1169–81.
Fujimori T, Iwasaki M, Nagamoto Y, Ishii T, Sakaura H, Kashii M, et al. Three-dimensional measurement of growth of ossification of the posterior longitudinal ligament. J Neurosurg Spine. 2012;16:289–95. doi:10.3171/2011.11.SPINE11502.
Matsuo Y, Kaito T, Iwasaki M, Sugiura T, Fujimori T, Nagamoto Y, et al. 3D morphometric analysis of laminae and facet joints in patients with degenerative spondylolisthesis. Mod Rheumatol. 2015;25:756–60. doi:10.3109/14397595.2015.1008673.
Stokes IA. Mechanical effects on skeletal growth. J Musculoskelet Neuronal Interact. 2002;2:277–80.
Stokes IA, Spence H, Aronsson DD, Kilmer N. Mechanical modulation of vertebral body growth. Implications for scoliosis progression. Spine (Phila Pa 1976). 1996;21:1162–7.
Meir AR, Fairbank JC, Jones DA, McNally DS, Urban JP. High pressures and asymmetrical stresses in the scoliotic disc in the absence of muscle loading. Scoliosis. 2007;2:4.
Meir A, McNally DS, Fairbank JC, Jones D, Urban JP. The internal pressure and stress environment of the scoliotic intervertebral disc--a review. Proc Inst Mech Eng H. 2008;222:209–19.
Modi HN, Suh SW, Song HR, Yang JH, Kim HJ, Modi CH. Differential wedging of vertebral body and intervertebral disc in thoracic and lumbar spine in adolescent idiopathic scoliosis - A cross sectional study in 150 patients. Scoliosis. 2008;3:11. doi:10.1186/1748-7161-3-11.
Wang S, Qiu Y, Zhu Z, Ma Z, Xia C, Zhu F. Histomorphological study of the spinal growth plates from the convex side and the concave side in adolescent idiopathic scoliosis. J Orthop Surg Res. 2007;2:19.
Kou I, Takahashi Y, Johnson TA, Takahashi A, Guo L, Dai J, et al. Genetic variants in GPR126 are associated with adolescent idiopathic scoliosis. Nat Genet. 2013;45:676–9. doi:10.1038/ng.2639.
Ogura Y, Kou I, Miura S, Takahashi A, Xu L, Takeda K, et al. A functional SNP in BNC2 is associated with adolescent idiopathic scoliosis. Am J Hum Genet. 2015;97:337–42. doi:10.1016/j.ajhg.2015.06.012.
Liljenqvist UR, Allkemper T, Hackenberg L, Link TM, Steinbeck J, Halm HF. Analysis of vertebral morphology in idiopathic scoliosis with use of magnetic resonance imaging and multiplanar reconstruction. J Bone Joint Surg Am. 2002;84-A:359–68.
Kuklo TR, Potter BK, Lenke LG. Vertebral rotation and thoracic torsion in adolescent idiopathic scoliosis: what is the best radiographic correlate? J Spinal Disord Tech. 2005;18:139–47.
Hayashi K, Upasani VV, Pawelek JB, Aubin CE, Labelle H, Lenke LG, et al. Three-dimensional analysis of thoracic apical sagittal alignment in adolescent idiopathic scoliosis. Spine (Phila Pa 1976). 2009;34:792–7. doi:10.1097/BRS.0b013e31818e2c36.
Newton PO, Fujimori T, Doan J, Reighard FG, Bastrom TP, Misaghi A. Defining the “Three-Dimensional Sagittal Plane” in thoracic adolescent idiopathic scoliosis. J Bone Joint Surg Am. 2015;97:1694–701. doi:10.2106/JBJS.O.00148.
Hattori T, Sakaura H, Iwasaki M, Nagamoto Y, Yoshikawa H, Sugamoto K. In vivo three-dimensional segmental analysis of adolescent idiopathic scoliosis. Eur Spine J. 2011;20:1745–50. doi:10.1007/s00586-011-1869-4.
Acknowledgements
The authors would like to thank Dr. Tsuyoshi Murase (Department of Orthopaedic Surgery, Osaka University Graduate School of Medicine) for permission to use Orthopedic Viewer.
Funding
This work was supported by a JSPS Grant-in-Aid for Young Scientists (B) (Grant Number 15 K19994).
Availability of data and materials
All data generated or analyzed in this study can be available on request through sending e-mail to the first or corresponding authors.
Authors’ contributions
TM and KS designed the study. TM and YS contributed to data collection. TM, TK, and KS interpreted the acquired data. TM and TK drafted the manuscript. TM, TK, ST, KS, and HY reviewed and edited the manuscript. KS and HY contributed to supervision of this study. All authors read and approved the final manuscript.
Competing interests
The authors declare that they have no competing interests.
Consent for publication
Not applicable.
Ethics approval and consent to participate
This study was approved by the Research Ethics Committee of Osaka University Hospital (no. 15098). The requirement for written informed consent of participants and their parents was waived by the committee due to the retrospective nature of this study.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Makino, T., Kaito, T., Sakai, Y. et al. Plasticity of vertebral wedge deformities in skeletally immature patients with adolescent idiopathic scoliosis after posterior corrective surgery. BMC Musculoskelet Disord 17, 424 (2016). https://doi.org/10.1186/s12891-016-1287-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12891-016-1287-1