Background

Linkage maps are key tools to genetically map and dissect complex traits, as well as for the study of several topics in genome biology such as the molecular basis of recombination and evolutionary genomics [1]. Interestingly, previous studies have reported larger recombination rate variations across and within chromosomes from swine species than those observed in other mammals [2]. These and other results, such as the construction of the most recent porcine linkage maps, have been enabled by the high density of markers provided by the PorcineSNP60 BeadChip [3],[4].

The X chromosome plays an important role in the evolution of human and animals [5], and experiences higher selection pressure than autosomes due to the sex-specific dosage compensation [6]. Moreover, the X chromosome of pigs carries many interesting genes involved in development, fertility, reproduction and diseases such as the inactive X specific transcripts (XIST), androgen receptor (AR) and thyroid-binding globulin (TGB), and over 370 QTLs for productive and reproductive related traits have been reported on this chromosome (www.animalgenome.org/cgi-bin/QTLdb). However, the location of these QTL is not precise, due to the low density of the available linkage map. In spite of its relevance, the highest density linkage map for the porcine X chromosome to date includes only 60 markers [7]. None of the above mentioned high density linkage maps include this chromosome.

High density genetic linkage maps are not only essential for QTL fine-mapping, they are also needed to successfully identify functional and positional candidate genes that may carry causal mutations. Therefore, the aim of the current study was to construct a high density linkage map of the SSCX, obtaining precise estimates of the recombination rate along this chromosome. Furthermore, we have employed the new dense marker linkage map to identify possible QTL for several production and meat quality traits in an experimental Iberian x Landrace cross.

Methods

Linkage map construction

The animals used in the current study belong to three generations of an experimental Iberian x Landrace cross, the so-called IBMAP pedigree [3]. Briefly, there were a total of 416 pigs of the IBMAP experimental cross, comprising 147 males and 269 females organized in 62 families. There were 86 F3 animals from the cross of three F2 boars with 15 F2 sows, 79 backcrossed animals (BC2) from the cross of four F2 boars with 22 Landrace sows, and 160 backcrossed animals (BC1) from the cross of five F1 boars with 25 Landrace sows. In addition, F1 and F0 sires and dams of the F2 and F1 animals described were also genotyped. A total of 329 meiotic events were available for further analyses. Animal manipulations were performed according to the Spanish Policy for Animal Protection RD1201/05, which meets the European Union Directive 86/609 about the protection of animals used in experimentation. The animals were genotyped with the PorcineSNP60 BeadChip [8] using the Infinium HD Assay Ultra protocol (Illumina, Inc.). Raw individual data had high-genotyping quality (call rate >0.99). The clustering of the genotype data obtained with the Illumina BeadStudio software was checked, and markers with poor clustering performance (GenScore <0.85) were excluded from the analysis. The high-quality SNPs mapped on SSCX following Sscrofa10.2 genome assembly [9] were retained, giving a total of 426 SNPs that were used for further analyses.

The linkage map was built employing exclusively the female genotypes and using those high-quality SNPs with a minor allele frequency higher than 0.15 (a total of 200 SNPs) (Additional file 1: Table S1). The Fixed option of the updated CRI-MAP v2.503 (provided by JF Maddox, http://www.animalgenome.org/bioinfo/tools/share/crimap/) was used for linkage map construction. The order given to the SNPs followed the physical order of the Sscrofa10.2 assembly. Note that possible errors in the Xq tail assembly (from 125 Mb in Sscrofa9 version corresponding to 144 Mb in Sscrofa10.2 version) have been reported [10]. However, the SNP data used in the current study span from 0 to 143 Mb, therefore the assembly region containing potential errors is not included in the analyses. In an attempt to evaluate remaining genotyping errors and mapping mistakes, Chrompic option of CRI-MAP was employed to reconstruct the chromosomes and carefully check double crossovers. The average recombination rates were calculated as the ratio between genetic and physical lengths (cM/Mb) from the first to the last marker. Genetic vs. physical distances were plotted considering the exact SNP linkage (cM) and physical (Mb) positions.

Correlations between recombination rate and SNP number, GC content (%GC) and gene content were examined. The SNP number, %GC and gene content were calculated along the X chromosome in 1 Mb non-overlapping windows. The gene content was estimated using the porcine genome annotation Sscrofa10.2 in BioMart tool of Ensembl (ensembl.org/biomart) [11] and the Ensembl Genes 76 database.

Chromosome X origin

To infer the origins of the chromosome X segregating in the mentioned IBMAP experimental cross, 100 animals with available genotypes from the Porcine60SNP BeadChip [10] and the 79 parental pigs of the experimental cross were included in the analysis. These animals were grouped into five pre-defined populations: 21 Asian wild boars from Korea (5) and Russia (16), 52 Asian domestic pigs from Korea (9) and China (43), 17 European wild boars from Poland (8), Tunisia (8) and Hungary (1), 13 Iberian pigs including the 3 sires and the 76 Landrace dams that were founders of the experimental cross. The genotypes for the 426 high-quality SNPs were extracted from the whole SNP dataset.

The SNPs contained within the pseudoautosomal (PAR) and non-pseudoautosomal (NPAR) regions of X chromosome were differentiated following Burgos-Paz et al. [12] criteria. The first 37 SNPs (from 0 to 6.54 Mb) fall within PAR and the remaining 389 (from 7.18 to 143.48 Mb) within NPAR, and each one of these chromosome regions was independently analyzed. A Bayesian clustering method in STRUCTURE software [13] was used to assign individuals to one of the K clusters representing ancestral populations, or jointly to two or more populations if their genotypes indicated that they were admixed. In this analysis, an admixed ancestry model was assumed, and K values equal to 2 and 3 were considered according to the results reported in the quoted study concerning worldwide genetic relationships between pigs based on SSCX SNPs [12]. For each analysis performed, a burn-in period of 50,000 iterations was followed by 500,000 iterations.

QTL scan

A QTL scan on SSCX was conducted for growth, fatness, intramuscular fat content (IMF) and body conformation traits recorded on 134 fattened pigs from the F3 (n = 55) and BC2 (n = 79) generations of the IBMAP experimental cross. The BC1 pigs were not included in the QTL scan as the segregating X chromosomes were exclusively of Landrace origin (F1 boars (♂ Iberian x ♀ Landrace) x Landrace sows). A summary of the phenotypic traits analyzed is shown in Table 1.

Table 1 Phenotypic traits recorded in 134 fattened pigs from the IBMAP intercross used for QTL detection on SSCX

The QTL scan was performed with the following basic model:

y i j k = S i + B j + u k +b x k + P a k a+ e i j k

where y ijk is the ijk th observation for the analyzed trait, S i and B j are the systematic effects for sex (male or female) and generation/cross (three levels), u k is the random polygenic effect of the k th individual, x k is a covariable (individual age, body or carcass weight in different analyses) and b its respective slope, a is the QTL additive effect; P ak is the probability of the k th individual having an allele of Iberian and e ijk is the random residual. The probabilities P were obtained using a modification of the MCMC algorithm described by Pérez-Enciso et al. [14] allowing for the fact that females have two X chromosomes and males have one, and including a weighting factor (Ψ = ½) to account for gene inactivation in females. The infinitesimal genetic effect was treated as random, with covariance Aσ2u, A being the numerator relationship matrix.

Likelihood ratio tests (LRT) were calculated comparing the full model and a reduced model without the corresponding QTL effect. The nominal P-values were calculated assuming a χ2 distribution of the LRT with the degrees of freedom given by the difference between the number of estimated parameters in the reduced and full models. Note that permutation techniques cannot be used to calculate chromosome-wide P with animal models because the pedigree structure is broken. It is assumed that a nominal 10−3P-value is equivalent to a 1% chromosome-wide level [15]. All the statistical analyses were performed using the Qxpak v.5.1 software [16]. The confidence intervals (CI) were calculated at 95% following Mangin et al. [17]

Results and discussion

A female-specific high density linkage map was built for chromosome SSCX using Sscrofa10.2 annotation (Additional file 2: Table S2). The total length of this chromosome was 84.61 cM, shorter than the three SSCX lengths previously reported by Ma et al. [7] (111.4, 159.7 and 128.4 cM), with an average recombination rate of 0.60 cM/Mb. To visualize the results, genetic vs. physical distances were plotted (Figure 1a). Although the total genetic length differs between Ma et al. [7] study and the present one, similar recombination cold and hot regions along SSCX were identified. The markers used in Ma et al. [7] study were annotated here using Sscrofa10.2 assembly version in order to compare SSCX regions. The central section of the chromosome (B interval from 62 to 103 Mb), comprising the centromere, showed almost no recombination events (average recombination rate = 0.05 cM/Mb). Note that few useful SNPs were available in this interval not only in the selected set for the analyzed population (Figure 1c), but also in the whole PorcineSNP60 BeadChip (Figure 1b) [18]. This large cold recombination section was previously described in Ma et al. [7]. That study was based on two F2 crosses between Western and Chinese pigs; therefore it could be hypothesized that the recombination suppression in such regions might be due to structural differences (insertions, deletions, translocations) between Asian and Western X chromosomes. This hypothesis has been refuted in the present study by determining the X chromosome origin. The results of the analysis conducted to determine whether the NPAR X chromosomes of the animals used in the current linkage mapping were of Asian or European origin are shown in Figure 2. Assuming two ancestral populations (K = 2), the European wild boars, Iberian and Landrace pigs clustered in the same genetic group with a membership proportion higher than 0.99. A similar proportion of Asian domestic pigs clustered in a separate group, and the analyzed Asian wild boars displayed admixture of European and Asian genetic components with averaged individual proportions of 0.30 and 0.70, respectively (Figure 2). Results from the alternative scenario (K = 3), with the assumption of two population clusters of European origin [11], confirm the separate and admixed clustering of Asian pigs and wild boars, respectively. Whereas Iberian pigs and European wild boars presented some admixture of the other two population clusters, Landrace pigs clustered in one of these genetic groups with an average proportion higher than 0.99. The Iberian and Landrace parents of the intercross are likely to be carriers of European X chromosomes rather than Asian X chromosomes, although there were probably two different X chromosome of European origin, according to the probabilistic assignments of individuals obtained when K = 3 (Figure 2). Both NPAR (Figure 2) and PAR (Additional file 3: Figure S1) analyses revealed similar results, with minor differences attributable to difference in the number of SNPs analyzed which was very low in the latter. Therefore structural differences between Asian and European X chromosomes would not provide a plausible explanation for the recombination suppression in the B interval, in agreement with other results where a remarkable homozygosity is observed in this section of the chromosome across European and Asian pigs and wild boars [19],[20].

Figure 1
figure 1

Physical distance versus linkage distance and SNP number for female-specific SSCX. a) Distribution of genetic (cM) against physical (Mb) distances for female-specific SSCX according to Sscrofa10.2. A, B, C, D and E boxes frame cold and hot recombination spots. b) Distribution of the SNPs contained in PorcineSNP60 BeadChip and mapped on SSCX according to Sscrofa10.2. c) Distribution of the SNPs retained in the current dataset and mapped on SSCX.

Figure 2
figure 2

Average Bayesian probabilistic cluster assignments by population in the non-pseudoautosomal region (K = 2 and K = 3). IB = Iberian; AWB = Asian wild boar; EWB: European wild boar; AD: Asian domestic pigs; LD: Landrace.

Conversely, four other X chromosome intervals showed recombination rates much higher than the average: the A interval ranging from 35 to 40 Mb, C interval from 103 to 106 Mb, D interval from 130 to 140 Mb and E interval from 121 to 123 Mb, showed recombination rates of 3.17, 1.42, 0.75 and 4.02 cM/Mb, respectively. Apart from the E interval, all of them correspond to the same recombination hotspots identified by Ma et al. [7] with slight differences. The E interval, containing six SNPs, revealed the largest recombination rate along SSCX, and it had not been identified in the previous study likely due to the lack of available markers. It should be noted that SSCX 10.2 assembly has several gaps, and some genome regions are missing. In fact the A region presents 16 gaps, the C region 8 gaps, the D region 19 gaps and the E region 3 gaps. Therefore it is possible that the physical lengths are larger than those used for recombination rate estimates.

In order to analyze the chromosome features influencing recombination rate on the X chromosome, the correlations between recombination rate and SNP number, GC content (%GC) and gene content were calculated. The correlation between recombination rate and SNP number was −0.14 (P-value = 0.12), recombination rate and % GC was 0.20 (P-value = 0.04) and recombination rate and gene content was 0.01 (P-value = 0.42). The only chromosomal feature significantly correlated with the recombination rate was to the GC content. The regions displaying higher recombination rates tended to show enriched GC sequences, in agreement with the tendency observed in autosomes [4].

To show an application of the map, a QTL scan for diverse traits in the experimental Iberian x Landrace cross was conducted using the newly generated linkage map for SSCX containing 200 SNP markers. The results of the analysis are shown in Table 2. The analysis revealed a QTL at 16 cM for the intramuscular fat content of longissimus dorsi with an additive effect of 0.33 ± 0.12% and a nominal P-value close to the 1% chromosome-wide level. Previous studies on the IBMAP population based on few microsatellite markers revealed a significant QTL in SSCX for live weight before slaughter [15]. However this result could not be validated in the current study, based on animals from other generations of this intercross. A QTL for IMF was previously reported on SSCX by Ma et al. [21] in two large-scale F2 intercosses between breeds with some alleles of Asian ancestry. Nevertheless the QTL (59–84 cM, 42–108 Mb) mapped far from the one identified in the present study.

Table 2 QTL detection for the analyzed traits: Positions, confidence intervals and additive effects

The confidence interval of the QTL for IMF was 13–20 cM, which corresponds to 3.5-5 Mb. The QTL falls within the PAR and outside of the cold and hot recombination intervals. This region contains only three protein-coding genes, including an interesting candidate gene for fat deposition, which require further investigation, the steroid sulfatase isozyme S (STS), located at 4.1 Mb on SSCX and involved in energy metabolism regulation and insulin sensitivity [22].

Conclusions

The present study presents for the first time a high density linkage map for SSCX and supports the existence of cold and hot recombination regions. The large cold recombination region in the central segment of the chromosome is not likely to be due to structural differences between Asian and European X chromosomes as previously hypothesized. The new generated linkage map has allowed us to identify a QTL for IMF content, an important meat quality parameter.

Additional files