Correction: Chinese Journal of Mechanical Engineering (2023) 36:10 https://doi.org/10.1186/s10033-023-00839-z
Following publication of the original article [1], it was found the Funding information is incorrect, the correct Funding information should be changed to:
Funding
Supported by National Natural Science Foundation of China (Grant Nos. U21A20165, 52205515, 52105431), Applied Basic Research Program of Liaoning Province of China (Grant No. 2022JH2/101300221), Dalian Science and Technology Innovation Fund of China (Grant No. 2022JJ12GX033), National Key Research and Development Project of China (Grant No. 2020YFB2009805), and China Postdoctoral Science Foundation (Grant Nos. 2020M680937, 2020M670734).
The original publication has been corrected.
Reference
Yang Y, Bao Y, Liu X, Wang J, Du F. Chin J Mech Eng (2023) 36:10 https://doi.org/10.1186/s10033-023-00839-z
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yang, Y., Bao, Y., Liu, X. et al. Correction: Progressive Failure Analysis of Composite/Aluminum Riveted Joints Subjected to Pull-Through Loading. Chin. J. Mech. Eng. 36, 21 (2023). https://doi.org/10.1186/s10033-023-00860-2
Published:
DOI: https://doi.org/10.1186/s10033-023-00860-2