Correction
After publication of this work [1], the authors noted that there were some corrections that should be added to the work. These corrections are done in order to modify some parts that were unfortunately missed during the original publishing procedures. The authors would like to apologize for the inconvenience.
Page 2 in the Methods section under “Mechanical loading studies and design of the defect” line 13: “4 cm” should be written instead of “8 cm.”
In the legends of Figures 7 and 8, the right tag should be as follows: A: Parotid duct, D: Facial nerve, V: facial vessels.
References
Eweida : Mandibular reconstruction using an axially vascularized tissue-engineered construct. Ann Surg Innov Res 2011, 5: 2. 10.1186/1750-1164-5-2
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
The online version of the original article can be found at 10.1186/1750-1164-5-2
Rights and permissions
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Eweida, A.M., Nabawi, A.S., Marei, M.K. et al. Erratum to: Mandibular reconstruction using an axially vascularized tissue-engineered construct. Ann Surg Innov Res 6, 4 (2012). https://doi.org/10.1186/1750-1164-6-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1750-1164-6-4