Background

PR10 proteins belong to the huge family of pathogenesis related (PR) proteins ubiquitous in the plant kingdom. PR proteins were first identified as defence molecules produced in response to pathogen attack and some of them actually display an antimicrobial activity. However, numerous studies have reported their induction under a great variety of abiotic stress conditions as well as possible constitutive or developmentally regulated expression [1]. Sharing common biochemical characteristics (acidic pI, resistance to proteolytic degradation, small molecular mass) PR proteins are divided into seventeen different groups based on their primary structure, serological relationships and biological activity [2]. Most of them are extracellular, but some others are found in the cytoplasm, mainly in the vacuole. PR10 proteins present the specificity to be free in the cytoplasm and are therefore classified as intracellular PR (IPR) proteins. They are closely related to a group of major tree pollen allergens and food allergens, that belong to the Bet v 1-like superfamily [3].

PR10 genes form multigene families with low intraspecific variation and higher interspecific variation that make them interesting phylogenetic markers [46]. Some of them were shown to be organized in chromosome clusters [7, 8]. Characterised in a number of plant species, most PR10 genes share an open reading frame (ORF) from 456 to 489 bp interrupted by an intron of 76-359 bp at a highly conserved position [9]. This ORF codes for an acidic small protein with conserved sequence features: three amino acids E96, E148 and Y150 (as positioned in Bet v 1) possibly involved in ribonucleasic activity and two other remarkable domains comprising the motif GXGGXGXXK (aa 47-55) that forms a P-loop supposed to have NTPase activity and the Bet v 1 motif [PS00451] characteristic of proteins from the Bet v 1 superfamily [9].

The significance of multiple close copies of a gene in a single plant species has to be clarified. In birch or yellow lupine, some PR10 genes are constitutively expressed while others are induced under pathogen attack, abiotic stress or during plant development, suggesting functional diversification [10, 11]. A significant common feature of PR10 proteins is a large Y-shaped hydrophobic cavity, as shown by the determination of three-dimensional structure [3, 1215]. This internal cavity could be responsible for the intracellular transport of apolar ligands, so diverse as fatty acids, flavonoids, cytokinins or brassinosteroids [10, 14, 16, 17]. Slight modifications of the structure and shape of this cavity would allow to bind different ligands, what could account for the diverse roles hypothesised for PR10 proteins in plant defence and development [12, 13].

To date, three different PR10 genes have been described in Vitis vinifera. VvPR10.1 was shown to be up-regulated during a pathogen interaction with Pseudomonas syringae in the cultivar Ugni blanc [18], while the expression of VvPR10.1, VvPR10.2 and VvPR10.3 was detected during somatic embryogenesis (SE) induction in the cultivar Chardonnay [19]. Moreover, several studies showed a strong and specific production of PR10 proteins in V. vinifera under salt or herbicide stress [20, 21], as well as after fungal attack [22, 23].

The recent publication of the whole genome sequence of V. vinifera by the Genoscope [24] and the Instituto Agrario San Michele all'Adige (IASMA) [25] makes genome scale analyses possible. Using these databases, we characterised all sequences of the PR10 gene family of V. vinifera and monitored the expression of nine candidate genes in various tissues and conditions.

Results

In silico identification of V. vinifera PR10related sequences

We searched for all V. vinifera PR10 related sequences in the whole genomic sequence published by the Genoscope. An automatic list of chromosome regions containing PR10 and PR10-like gene annotations was produced. After correction for mis- and redundant annotations, ten sequences with a complete ORF were retained, comprising VvPR10.1 and VvPR10.2, previously identified (AJ291705 and AJ291704 respectively) and the recently described VvPR10.3 gene (EU379313) [19]. Three additional incomplete sequences corresponded to pseudogenes. All thirteen sequences were arranged in a tandem array on the chromosome 5. On both sides of this cluster, we could identify four more PR10 related sequences, omitted by automatic annotation. No additional sequence was retrieved by a further homology search, suggesting that all V. vinifera PR10 genes are grouped in this single cluster, approximately 80,000 pb long and limited by putative genes not related to PR10 genes. The seventeen PR10 related sequences were named s1 to s17 and numbered according to their position on the chromosome regardless the strand they were located on (Figure 1): the twelve first (s1 to s12) and the last one (s17) on the minus (-) strand of the chromosome, and s13 to s16 on the plus (+) strand. VvPR10.1, VvPR10.2 and VvPR10.3 respectively correspond to s16, s10 and s12. All Genoscope references and precise locations are given in the additional file 1. The seventeen sequences collected from the Genoscope (PN 40024) were compared to their counterparts in the IASMA database (Pinot noir ENTAV 115), which are scattered on fifteen different scaffolds [additional file 2]. Each sequence was less than 2% divergent from its counterpart, highlighting a high similarity between the two genomes and databases.

Figure 1
figure 1

Organisation of V. vinifera PR10 related sequences in a single cluster on chromosome 5. All sequences are located between the positions 599,000 and 681,000, on the + or the - strand. Nucleotide positions are as referenced on the Genoscope website.

Characterisation and comparison of nucleotide sequences

The putative exon-intron structure of the seventeen PR10 related sequences was determined (Figure 2a). Each sequence is interrupted by a single intron at a very well conserved position, presenting consensus motifs at the 5' and 3' boundaries with exons (Figure 2b). The hypothetical CDS are 204 to 486 bp long. The length of exons is well conserved, except for s6, s7 and s9, which are shortened by a premature stop codon suggesting that they are pseudogenes. In addition, s9 presents a single nucleotide deletion in the first exon, which induces a frame shift definitely compromising a correct translation. The structure of the fourteen sequences with a complete ORF is in accordance with previous reports on Vitis vinifera and other plant PR10 genes [9, 18, 19].

Figure 2
figure 2

Exon-intron structures of the seventeen PR10 related sequences. A: length of exons (bold dashes) and introns (thin dashes). B: frequency of nucleotides at the 5' and 3' putative splicing sites of introns. The size of letters is proportional to the nucleotide frequency at each position. The numbers indicate nucleotide position relatively to the first nucleotide of intron 1 (number 1 at the 5' end) or to the first nucleotide of exon 2 (number 1 at the 3' end). VvPR10.1, VvPR10.2 and VvPR10.3 respectively correspond to s16, s10 and s12.

The CDS were aligned for comparison. The percentages of nucleotide similarity are given in Figure 3. All sequences are very similar and show at least 48% of nucleotide similarity. A very high similarity (≥92%) was found between the six sequences s11-s16, including VvPR10.1 and VvPR10.3, that are also strongly similar to s10-VvPR10.2 (87-91% of nucleotide similarity), together forming a group of closely related sequences. The sequence of the pseudogene s6 is also remarkably similar to s5 (91%). The intron sequence is more variable and the similarity percentages range from 8 to 100%, being very high for the seven sequences s10-s16 comprising VvPR10.1, VvPR10.2 and VvPR10.3 on one hand, and for s5 and s6 on the other hand [additional file 3].

Figure 3
figure 3

Percentages of nucleotide similarity between the CDS of the seventeen sequences. High percentages of nucleotide similarity are highlighted in red. VvPR10.1, VvPR10.2 and VvPR10.3 respectively correspond to s16, s10 and s12. The values were obtained from sequence alignments on ClustalW.

Prediction of expression

In order to determine whether the newly identified PR10 related sequences could be functional genes, we searched for related Expressed Sequence Tags (ESTs) in the databases (Table 1). Consistent with the prediction of s6, s7 and s9 as pseudogenes, no EST was found to match these incomplete sequences. In addition, we found no EST corresponding to s2, s4, s8 nor s17, suggesting that these sequences would not be transcribed, at least in the tissues and conditions reported in the databases. On the contrary, numerous different ESTs (> 100) were found to match s11, s13, s14 and s15 with up to 99% nucleotide similarity. Although some of them also matched the highly homologous VvPR10.1, VvPR10.2 and VvPR10.3, the expression of which was reported [18, 19], other ESTs were closer to s11, s13, s14 and s15, that would therefore be expressed in varied reproductive and/or vegetative tissues. Several ESTs corresponding to s1, s3 and s5 were also found (1, 52 and 4, respectively). Although a single incomplete EST (27% of coverage) matched s1, its sequence was 100% similar to the sequence of s1. Moreover, this EST covered the last 135 nucleotides of the CDS and 3'UTR, which are usually the most varying parts of a gene sequence, suggesting that this EST is a specific partial transcript of s1. The ESTs matching s3 and s5 with up to 99% similarity and 100% coverage argue for the expression of these two sequences. Using the Gene Finding program, a correct gene structure was predicted for the seven sequences s4, s5, s8, s11, s13, s14 and s15, in addition to VvPR10.1, VvPR10.2 and VvPR10.3 (Figure 4). All possess the well positioned TATA-box, transcription starting site (TSS) and polyadenylation signal, defining a CDS of 477-480 bp. No promoter was found for s1, s2, s3 and s17. When a manual search was performed, no TSS-motif was detectable for these sequences, but a TATA-box was identified for s1, s3 and s17 at the respective positions -1,214, -699 and -313 nucleotides. On the whole, in addition to the three well characterised V. vinifera PR10 genes, seven PR10 related sequences showed the canonical transcription signals, suggesting their possible expression, although no specific EST was found to match s4 nor s8. In contrast, s1 and s3 did not show the features usually described for effective transcription, but some specific ESTs were identified in the databases, indicating their probable expression. Finally, s2 and s17 showed no usual transcription signals, and no EST was found to match these two sequences.

Table 1 ESTs from Vitis spp. related to the seventeen PR10 sequences
Figure 4
figure 4

Predicted structures for PR10 related sequences of V. vinifera. Only sequences having canonical transcription signals are shown. The arrow indicates the transcription starting site (+1). Predicted exons are represented as black boxes and deduced introns as dashed boxes. Given positions respectively correspond to the start of the TATA-box, the transcription starting site, the first nucleotide of the CDS, the last nucleotide of exon 1, the first nucleotide of exon 2, the last nucleotide of the CDS and the first nucleotide of the poly-A signal. Predictions were performed using the GeneFinding program. VvPR10.1, VvPR10.2 and VvPR10.3 respectively correspond to s16, s10 and s12.

Characterisation of deduced PR10 proteins and phylogenetic analysis

The nucleotide sequences with a complete ORF were named according to usual nomenclature. The highly similar sequences VvPR10.1, s15 and s11 on one hand, and VvPR10.3, s13 and s14 on the other hand (≥97% nucleotide similarity) were named VvPR10.1-a, -b and -c, and VvPR10.3-a, -b and -c, respectively. The other sequences were named VvPR10.4 to VvPR10.10 for s8, s5, s4, s3, s1, s2 and s17, respectively, following increasing divergence from the group of VvPR10.1-a to VvPR10.3-c sequences. Putative protein sequences were deduced from nucleotide sequences, analysed and compared. All proteins are 158-160 aa long (Figure 5), have a calculated molecular mass ranging from 17.1 to 18.4 kDa and a theoretical pI from 4.7 to 6.3, consistent with usual plant PR10 features [9]. Apart from few exceptions mentioned in the figure legend, all sequences present the three characteristic amino acids thought to be implied in ribonucleasic activity: E102, E149 and Y151, the characteristic P-loop motif (aa 47-55) described in various species and corresponding to the consensus sequence GXGGXGXXK, and the Bet v 1 motif which is the signature for the Pathogenesis-related proteins Bet v 1 family (Prosite accession PS00451)[3, 9]. The predictive three-dimensional structure of the deduced proteins was determined. As for PR10.1 (Figure 6), all proteins would be composed of three alpha-helices and a seven-stranded antiparallel beta-sheet arranged to form a large internal hydrophobic cavity. Nine short loops connect the secondary elements. This conformation is in accordance with the crystal structure determined for plant PR10 proteins in cherry, yellow lupine, birch and celery [1215]. All these observations suggest correct structure and folding for the eleven putative V. vinifera PR10 proteins in addition to PR10.1, PR10.2 and PR10.3 [additional file 4].

Figure 5
figure 5

Sequence alignment of deduced PR10 proteins. The P-loop and Bet v 1 signature are framed. A star (*) marks the amino-acids implied in possible ribonucleasic activity (E102, E149 et Y151). Alignments were performed with ClustalW. A V. vinifera specific Bet v 1 motif was determined: G-[DG]-[VA]-L-x(4)-E-[SY]-[IL]-[CSATV]-[HY]-[ED]-x-[KST]-x-[VE]-x(3)-[GNDS]-G(2)-[CS]-x(2)-K-x(2)-[SK]-X-Y. In PR10.8 and PR10.10, the last aa varies in the P-loop motif (E and T, respectively); in PR10.9, E102 is replaced by D102, the 4th aa in the P-loop motif is E, and the Bet v 1 motif presents 4 differences (out of 34 aa) at the positions 1, 6, 23 and 29; in PR10.6, there is one difference (out of 33 aa) in the Bet v1 motif (position 12).

Figure 6
figure 6

Three-dimensional structure of V. vinifera PR10.1 represented by a ribbon diagram. The structure was predicted on an automated comparative protein modeling server using SWISS-MODEL.

A phylogenetic tree shows the relationships between V. vinifera PR10 proteins and representatives of the main PR10 subfamilies in other plants: Mal d 1 and Pru p 1 subfamilies I-IV in Malus domestica [7] and Prunus persica [8], Bet v 1 subfamilies I-III and V in Betula pendula [26] and LlPR10 subclasses I and II in Lupinus luteus [11] (Figure 7). In each species, PR10 proteins tend to form one (Betula pendula, Lupinus luteus) or two clades (Malus domestica, Prunus persica and Vitis vinifera), showing a low intraspecific and a higher interspecific variation, as previously described [46]. In a first clade, V. vinifera PR10 proteins are subdivided into two distinct homogeneous groups: PR10.1-A to PR10.3-C with more than 79% of amino acid identity and PR10.4 to PR10.6 with more than 81% of amino acid identity. These two groups of tightly phylogenetically connected proteins are closer to birch Bet v 1 than to PR10 proteins of other plant species, and are undoubtedly distant from the four other V. vinifera PR10 proteins, PR10.7 to PR10-10.

Figure 7
figure 7

Phylogenetic relationships between V. vinifera PR10 proteins and representative PR10 proteins from Betula pendula , Lupinus luteus , Malus domestica and Prunus persica. GenBank accession numbers are as follows: Betula pendula Betv1.0401 (CAA54482), Betv1.0601 (CAA54484), Betv1.1101 (CAA54694), Betv1.1301 (CAA54696), Betv1.1701 (CAA96539) and Betv1.1801 (CAA96540); Lupinus luteus LlPR10.1A (CAA56298), LlPR10.1B (CAA56299), LlPR10.2A (AAF77633), LlPR10.2B (AAF77634) and LlPR10.2E (AAP37978); Malus domestica Mald1.01 (AAX18288), Mald1.02 (AAX18291), Mald1.03A (AAX18313), Mald1.04 (AAX18294), Mald1.05 (AAX18296), Mald1.06A (AAX18299), Mald1.07 (AAX18307) and Mald1.08 (AAX18310); Prunus persica Prup1.01 (ACE80940), Prup1.02 (ACE80942), Prup1.03 (ACE80944), Prup1.04 (ACE80946), Prup1.05 (ACE80948) and Prup1.06A (ACE80952). The V. vinifera Grip61 gene (CAB85634) was included as an outgroup representative of another Bet v 1 subfamily [3]. The NJ-tree was generated with the Phylo_win program. The bootstrap value is given for each node.

Expression of V. vinifera candidate PR10genes

The possible expression of ten out of the fourteen complete PR10 sequences was assessed in various non-treated tissues of V. vinifera cv. Chardonnay, as well as during secondary somatic embryogenesis. It was not possible to design specific primers for the detection of VvPR10.1-b and -c and VvPR10.3-b and -c transcripts, because of very high similarity with VvPR10.1-a and VvPR10.3-a transcripts respectively, even in the 5' and 3' UTRs.

Nine different genes were expressed in the tissues analysed, VvPR10.10 transcripts being undetectable in any condition (Figure 8). Moreover, VvPR10.4 and VvPR10.9 transcripts were only weakly detected in a few tissues.

Figure 8
figure 8

Expression of V. vinifera PR10 genes. A: tissue-specific expression; R = roots, S = stems, L = leaves, F = flowers. B: expression during secondary somatic embryogenesis induction; E = non-treated somatic embryos at the cotyledonary stage, E2,4-D = calli obtained from embryos treated with 2,4-D. gDNA = genomic DNA. The length of amplified sequences are given in bp.

In intact tissues, all nine PR10 genes were expressed, depending on the plant organ. In roots, the expression of all genes except VvPR10.7 was detected, although VvPR10.8 transcription was very weak. At the opposite, VvPR10.7 transcription was high in leaves, while VvPR10.5 and VvPR10.6 transcripts were not detected; all other genes were expressed at varied levels. In stems, VvPR10.2, VvPR10.3-a and VvPR10.7 were the only clearly expressed genes. Immature flowers expressed all genes except VvPR10.4 and VvPR10.9. In non-treated somatic embryos, VvPR10.1-a, VvPR10.3-a and VvPR10.8 transcripts were weakly detected, while VvPR10.2 transcription was clear.

The 2,4-D treatment of embryos used for induction of secondary somatic embryogenesis increased the expression of VvPR10.1-a, VvPR10.3-a, VvPR10.5 and VvPR10.9 but not VvPR10.2 and VvPR10.8. The expression of VvPR10.6 was also weakly stimulated. On the other hand, VvPR10.7 transcription was weakly detectable in intact embryos but not at all in tissues derived from 2,4-D-treated embryos. VvPR10.4 expression was not detected in non-treated or treated embryos.

Discussion

We found a total of seventeen PR10 related sequences in the whole V. vinifera genome. Thirteen unique sequences were retained from an automatic search that initially produced ninety regions, reflecting redundancy of the database as well as annotation errors partly due to wrong homology detection. A manual search allowed the recovery of four additional PR10 related sequences. All seventeen sequences were found in a single compact cluster on the chromosome 5. Plant PR10 belong to multigene families. There are at least five PR10 genes in pea [27], eighteen Mal d 1 genes in apple [7], ten Bet v 1 genes in birch [6], eight Fra a 1 genes in strawberry [28], six PR10 genes in Solanum surattense [29], eight in yellow lupine [11], five in rice [30], and eight Pru p 1 and Pru d 1 genes in peach and almond, respectively [8]. They were shown to form physical clusters in apple [7] and peach [8]. Poplar PR10 genes are also supposed to be grouped on chromosomes [26]. Tandem duplicates are frequent in plant genomes and represent up to 16% of Arabidopsis genes [31]. Such gene clusters are thought to be produced by successive single gene or small-scale duplications. We found that thirteen out of the seventeen V. vinifera PR10 sequences are present on the chromosome in direct orientation, suggesting that most copies were produced by unequal crossing over events, as described in Arabidopsis and rice [31].

Following duplication, new copies of a gene may undergo modifications allowing functional diversification, which is a significant source of evolutionary novelty in plants [32]. However, gene duplication mostly creates copies that are rapidly lost through pseudogenisation. As a result, from numerous homologous sequences coexisting in a genome, only a part are functional genes. From the seventeen V. vinifera PR10 sequences, only fourteen have an intact ORF. In birch, the copy number of PR10 genes varies from twelve to twenty-five, depending on the species, and pseudogenes represents as much as one-third of Betula nigra alleles [6]. In V. vinifera, the pseudogenes s7 and s9 share the highest nucleotide similarity with VvPR10.6 (s4), suggesting that they could derive from its duplication. Likewise, s6 is closer to VvPR10.5 (s5) than to all other sequences and could therefore originate from its duplication. Moreover, s6 and VvPR10.5 are also very similar at the intron level (81% of nucleotide similarity), indicative of possible recent duplication or slow pseudogenisation.

Apart from pseudogenes, sequence divergence is generally reduced in PR10 multigene families. PR10 genes within a species are generally very similar and more distant from gene copies of other plant species [4]. Such a low intraspecific variability has been observed in Passiflora [5] and in the Betula genus [6]. The different paralogs are thought to undergo strong concerted evolution which is the tendency of a family of repeated genes to jointly evolve. The close physical proximity of tandem duplicates facilitates gene conversion or unequal crossing-over events leading to concerted evolution [6]. The phylogenetic tree in Figure 7 illustrates probable concerted evolution in the V. vinifera PR10 family. However, V. vinifera PR10 proteins divide into two clades interrupted by PR10 of other plants, indicating partial independent evolution. Interestingly, the seven sequences s10 to s16 corresponding to the very homologous proteins PR10.1-A to PR10.3-C follow one another on the chromosome, what could favor concerted evolution and suggest strong local selection pressure. However, it cannot be ruled out that recent duplication events produced these seven very homologous sequences.

Grapes, as other eudicot species, probably originate from an ancient hexaploid ancestor formed through whole genome duplication (WGD) events [24, 33]. Recurrent polyploidisation is tightly linked to evolution in angiosperms, providing raw materials for gene diversification and genome refinement, and coinciding with species radiation [32]. A WGD is followed by incomplete and asymmetric loss of gene copies and chromosome rearrangements allowing the recovery of a diploid-like state compatible with effective reproduction. In Arabidopsis, it was possible to track gene pairs released by a recent specific WGD event [34]. Only 28.6% of gene pairs were retained from the transient tetraploid genome, the other pairs having lost a copy from one of the homeologous chromosomes. In V. vinifera, PR10 sequences were solely located on the chromosome 5, suggesting loss of some of the triplicate ancestral copies and/or translocation on a unique chromosome. The seventeen present PR10 sequences are most probably due to repetitive small duplications having continuously occurred during V. vinifera evolution. Subsequent mutations and possible positive selection are responsible for the observed divergence within the sequences. However, at least a part of V. vinifera PR10 sequences are probably subjected to concerted evolution, reducing variability and hampering the identification of putative triplicate ancestral copies.

We were able to detect the expression of nine out of the fourteen complete PR10 related sequences in varied non-treated and treated tissues of V. vinifera cv. Chardonnay. Three genes, i.e. VvPR10.1-a, VvPR10.2 and VvPR10.3-a, were already shown to be expressed under pathogen attack or abiotic stress, and during somatic embryogenesis induction [18, 19], whereas expression of VvPR10.4-VvPR10.9 was never studied before. VvPR10.10 transcripts were not detectable in our conditions. This sequence has no corresponding EST in the databases and lacks canonical transcription signals. However, expression could be limited to very specific tissues and/or developmental stages. Although specific ESTs in the databases suggest a probable expression of the four sequences VvPR10.1-b and -c and VvPR10.3-b and -c, the distinction of each transcription product would require more sensitive methods than PCR, such as cDNA-AFLP or SSCP, which were used for discriminate highly homologous sequences in potato, polyploid cotton and barley [3537]. The expression of VvPR10.5, VvPR10.7 and VvPR10.8 is not surprising because well matching ESTs were found in the databases. On the contrary, no EST was found to correspond to VvPR10.4, VvPR10.6 and VvPR10.9, whose expression is therefore reported for the first time. Interestingly, VvPR10.7, VvPR10.8 and VvPR10.9 are expressed although devoid of canonical transcription signals.

We found transcripts of all nine PR10 genes in varying amounts, in the different non-treated tissues analysed, suggesting a role apart from defence. Specific expression profiles were found in intact tissues, except for VvPR10.2 and VvPR10.3-a. Stems and intact embryos expressed a reduced subset of PR10 proteins. On the contrary, immature flowers expressed a large subset of PR10 genes, suggesting a possible role of some PR10 proteins during sexual reproduction. No V. vinifera PR10 gene was solely expressed in calli derived from 2,4-D-treated embryos. However, expression of several genes was enhanced in these tissues, at least weakly. Somatic embryogenesis is generally obtained from tissues subjected to the auxin 2,4-D, which acts as a stress factor able to trigger the reprogramming of plant somatic cells towards embryogenesis [38]. As a consequence, high amounts of defence proteins are produced following a 2,4-D treatment, as shown in grapevine cultures [39]. Consistent with the results reported here, we previously showed that varied PR genes including VvPR10.1-a and VvPR10.3-a are up-regulated during secondary somatic embryogenesis induction in V. vinifera [19]. VvPR10.1 expression was also previously reported to be induced in whole plant leaves challenged with the incompatible bacterium Pseudomonas syringae [18]. Interestingly, VvPR10.4 and VvPR10.7 were not responsive to 2,4-D treatment.

On the whole, various expression patterns were found for V. vinifera PR10 genes, indicating functional diversification and possible tissue specificity. Likewise, in other plants, PR10 proteins show expression diversity suggesting various biological activities [9]. A major feature of PR10 proteins is their internal hydrophobic cavity with openings at the protein surface. Several three-dimensional modeling studies showed that this structure is suitable for the binding and transport of diverse hydrophobic ligands as brassinolides [14] or homocastasterone [12]. Some birch and yellow lupine PR10 can bind diverse molecules such as cytokinins, brassinosteroids, fatty acids and flavonoids, suggesting that they could interfere with the trafficking of hormones inside the cell [10, 16, 17]. Moreover, overexpression of a PR10 gene in pea led to a change in the ratio between cytokinins and abscisic acid, showing that the PR10 content could be relevant for intracellular hormone regulation [40]. Although all crystallographic models for PR10 proteins share the same canonical fold, their superimposition can reveal structural differences [12]. Remarkably, the volume of the internal cavity and of its openings can show some variability, what could influence the type of transported ligand. In yellow lupine, different shapes for the inducible LlPR10.1A and the constitutive LlPR10.1B could account for their different biological roles [13].

Conclusion

The availability of the complete genome sequence of V. vinifera allowed us to characterise the PR10 gene family. Seventeen different PR10 related sequences including three pseudogenes were identified and located in a single compact cluster on the chromosome 5, most probably reflecting repetitive small duplications during evolution. A phylogenetic analysis showed a characteristic low variability within the different sequences, especially within seven sequences closely located on the chromosome, suggesting probable concerted evolution. We could analyse the expression of nine genes in various tissues. Different expression patterns indicate functional specialisation. Several genes showed a typical stress induced up-regulation. Further experiments will help to elucidate the differential regulation of V. vinifera PR10 gene expression.

Methods

In silico identification of PR10 related sequences in the V. viniferagenome and characterization of candidate genes

The grapevine Genoscope database was used to identify any sequence related to PR10 genes [41]. The Genoscope Blat tool [42] and the ClustalW alignment tool of the European Bioinformatics Institute (EBI) [43] were used to retrieve and compare the sequences. An automatic list produced twenty-three unique (among ninety) putative PR10 or PR10-like gene annotations. Seven annotations with no consistent homology with PR10 genes were removed. Six other annotations covered three complete sequences, from which each exon was annotated as an independent gene, suggesting that the intron splicing sites were not detected. The last ten annotations comprised seven sequences with a complete ORF, and three with a prematurely interrupted ORF. All thirteen PR10 related sequences were found to form a cluster on the chromosome 5, between the positions 604,886 and 675,550. Thoroughly examining this chromosome portion as well as its 5' and 3' extensions, we found four additional annotations with nucleotide similarity (48-71% in the ORF) to the thirteen previous sequences. The PR10 cluster was found to be limited by two putative genes not related to PR10 sequences GSVIVT00033064001 and GSVIVT00033091001.

All corresponding genome sequences originating from the Istituto Agrario San Michele all'Adige (IASMA) grapevine database were retrieved using the NCBI Blast tool [44]. They were compared to the Genoscope sequences using the ClustalW alignment tool.

The exon-intron composition of PR10 sequences was automatically determined by the Gaze program on the Genoscope website. When necessary, the position of the intron was corrected relatively to the structure of VvPR10.1 [18], and according to the 5' and 3' splicing consensus sequences NN/GT and AG/NN, respectively.

Vitis sp. ESTs were searched, using the blastn program of the NCBI database [44].

Gene structures were predicted using the Gene Finding program on the University of London bioinformatics web server [45]. The organism parameter was set on "dicots". The FGENESH method showed the position of the TATA-box, the first and last nucleotides of the exons and the position of the polyadenylation signal. The TSSP-TCM method localized the transcription initiation site (+1).

Protein sequence analysis

The putative CDS were translated using the Transeq program [46]. The PM and pI were determined using the COMPUTE program [47]. The PROSITE database [48] was used to find the Pathogenesis-related proteins Bet v 1 family signature. Three-dimensional structures were predicted on an automated comparative protein modeling server using SWISS-MODEL [49].

Phylogenetic analysis and multiple alignments

A phylogenetic tree was built using the Neighbor-Joining method, with the Phylo_win program [50]. Bootstrap values were obtained from 500 replicates. The ClustalW alignment tool was used to compare protein sequences.

Plant material

All expression studies were performed on V. vinifera plants or cultures of the cultivar Chardonnay.

We separately collected roots, stems (with nodes) and whole leaves from well developed plantlets (10-12 leaves) obtained from in vitro microcutting, as previously described [51].

Immature flowers were harvested from French vineyards, at the stage of separate flower buds.

Recurrent in vitro embryogenesis was induced from nodal explants of the V. vinifera cv. Chardonnay, as previously described [19]. Young cotyledonary somatic embryos were isolated and transferred onto a medium containing the auxin analog 2,4-D for induction of indirect secondary embryogenesis. After three weeks, an undifferentiated callus was obtained from each embryo.

Tissues were collected, frozen in liquid nitrogen and further conserved at -80°C until RNA extraction. Two independent samplings were performed.

RNA extraction and analysis

Total RNA extractions and semi-quantitative RT-PCR experiments were performed as reported [19]. Primer pairs were designed to overlap the intron, in order to distinguish possible genome DNA contamination from gene expression products (Table 2). All primer pairs were shown to efficiently detect the respective corresponding genomic sequences (gDNA). Semi-quantitative RT-PCR tests were performed in three replicates. PCR products were sequenced to confirm their identity (Genoscreen, France).

Table 2 Sequences of primers used for semi-quantitative RT-PCR