A TR-UWB Downconversion Autocorrelation Receiver for Wireless Body Area Network
- 1.1k Downloads
Low power UWB receiver architecture is proposed for a Wireless Body Area Network (WBAN). This receiving technology is a synergy of existing downconversion-based narrowband rejection mechanism in RF front end and signal processing in frequency domain. Frequency components of converted and filtered UWB pulses are separated into real and imaginary parts, independently correlated and effectively combined to achieve an improved output Signal to noise ratio (SNR). An extensive mathematical analysis has been performed to formulate the close-form expressions for SNRs in order to compare system performances toward favorable BER under BPSK modulation scheme. Analysis shows that optimal rotation of coordination plays an important role for the enhancement of receiving SNR which is further confirmed by computer simulation. A wide range of link level simulation (LLS) urges that the proposed system is more power efficient in higher-order modulation (HOM) schemes. Transmitted Reference (TR) scheme has been considered as the basis for wideband communication.
KeywordsLocal Oscillator Wireless Body Area Network Rake Receiver Receiver Architecture Transmit Reference
Cardiovascular disease is the leading cause of death [1, 2, 3, 4] and it accounts for approximately 30% of all deaths worldwide  requiring giant healthcare expenditure . A Wireless Body Area Network (WBAN) allows the integration of intelligent, miniaturized, low-power, invasive, and noninvasive sensor nodes to monitor body function and the surrounding environment . Each intelligent node has enough capability to process and forward information to a base station for diagnosis and prescription. A WBAN provides long-term health monitoring of patients under natural physiological states without constraining their normal activities. It can be used to develop a smart and affordable health care system and can be part of diagnostic procedure, maintenance of chronic condition, supervised recovery from a surgical procedure, and handling emergency events. One of the major components of WBAN is low-power miniaturized sensor . This paper aims to develop an extremely low power receiver that can be employed for WBAN.
The transmitted data is encoded by relative phases of two pulses. The first pulse acts as a reference and the second pulse is the modulated one. The receiver delays the first pulse by the delay D, multiplies it with the second pulse, and integrates the result over one delay length, which in fact correlates the two pulses. When using polar Non Return to Zero (NRZ) modulation, for a logical zero, a pulse is transmitted, subsequently followed by a polarity reversed pulse. To send a logical one, two pulses with the same polarity are sent sequentially. The absolute value of the output after integration is in fact the energy of the pulse while the polarity of the output contains the data. If the output is negative, this corresponds to a logical zero, while a positive output corresponds to a logical one. Thus, the information is in the relative polarity of the two pulses and the delay between them acts as a synchronization mechanism. As long as the two consecutive pulses have corresponding waveforms except for their polarity, the autocorrelation receiver can detect them properly. Yet, directly processing at UWB frequencies, due to the inherent influence of on-chip parasitic reactances at these frequencies, requires relatively large currents, or the use of expensive high speed technologies (SiGe, GaAr).
The work in  suggests a new receiver architecture based on the TR scheme  for its mentioned advantages with the rake receiver. It deals with interference rejection by filtering and avoids high frequency on-chip processing by using frequency conversion. Frequency conversion in this receiver is done differently from the traditional narrowband system to reject narrowband interference by making a proper choice for the frequency of the local oscillator (LO). The authors in  show a lot of advantages of their proposed UWB receiver. For example, it does not suffer from timing and template matching problems, and it circumvents processing at high frequencies, thereby reducing the on-chip circuit complexity and power consumption. Recently, many works have been done to digitally implement the TR-UWB system. However, the limited speed and resolution of the current ADC technology have been a major drawback. To lessen the constraints in ADC sampling speed required for digitally implementing the TR-UWB system, a technique using signal expansions into frequency components has been proposed in . Application of proposed technique in  on the receiver architecture suggested in  may develop a new receiving technology in which the front end is for downconversion-based narrowband rejection and there after, signal processing is carried out in frequency domain. In fact, this is the main idea of our work.
The authors in  are dealing with a similar problem where they estimate the joint response of the analysis filter and the propagation channel independently in each subband. However, it does not consider the coordinate rotation; moreover it uses hybrid filtering as subband filters which reduces the design freedom in the aspect of coexistence issues.
2. Analysis of Proposed System
2.1. Interference Rejection
The proposed architecture employs frequency conversion as done in  to coexist with other existing narrowband systems. To achieve this technique, a proper choice for the frequency of the Local Oscillator (LO) is made. Let us investigate this issue in terms of some practical numerical values. If the LO frequency is set to the center frequency of the pulse, which for simplicity is chosen to be in the middle of the band allocated by the FCC for UWB (6.85 GHz), the system acts like a zero IF system and the bandwidth is halved, that is, the band from 3.1 GHz to 10.6 GHz is transformed into a baseband signal from DC to 3.75 GHz. However, the wireless LAN (WLAN) originally residing at around 5.5 GHz is shifted to 1.35 GHz, so it is still in band. Another option is to set the oscillator frequency to this WLAN frequency, such that this interference is shifted to around zero making possible to remove it using a simple high-pass or bandpass filter.
A possible disadvantage is that the downconverted bandwidth of the UWB signal extends up to approximately 5.1 GHz and the converted 2.4 GHz interferer falls in band. A third option is to set the LO to 5.5 GHz and filter out below Open image in new window 0.35 GHz and above Open image in new window 3.1 GHz. By this way, we remove the interferences completely with a simple bandpass filter, albeit at the expense of the loss of part of the incoming frequency band, from Open image in new window GHz to 10.6 GHz and from 5.15 to 5.85 GHz, which is a bandwidth of 2.7 GHz, being only 36% or equivalently 1.9 dB.
2.2. Information Decoding and Performance Analysis
Open image in new window can be thought as the correlator output under noise free channel.
To implement the right most term in (9), we need the frequency components of Open image in new window and Open image in new window at discrete position of frequency domain. This is realized by a series of analog correlators and termed as sampler in Figure 2. Due to Fourier transform properties, the frequency resolution Open image in new window achievable from a time-domain signal confined in Open image in new window duration is calculated by Open image in new window . Thus, the sample values of Open image in new window and Open image in new window at discrete position Open image in new window can be obtained from the sampler.
The frequency component of a data pulse at Open image in new window can likewise be expressed as
According to (10), a signal signature resides only on real-axis. Thus a receiver to implement (13) uses the following decision rule:
In the same way, for lower path,
where Open image in new window
Defining Open image in new window and Open image in new window . Now a message point for Open image in new window is located at Open image in new window in the constellation diagram while a message point for Open image in new window is at Open image in new window and hence a decision boundary is the line to bisect the line at right angle connecting two message points. Two message points are always symmetrical with respect to origin, and the connecting line has a slope of Open image in new window . Let us rotate the coordination by Open image in new window , then two message points are relocated at Open image in new window and Open image in new window where Open image in new window . Then the decision rule becomes
where Open image in new window .
Mean and Variance of Open image in new window :
The ratio of SNRs of two systems is
However, (24) implies that the more θ is departed away from Open image in new window , the better the performance of our proposed receiver architecture. Theoretically, two systems are identical regarding performance when Open image in new window . Suppose that as it is intuitionally, the variance of Open image in new window and Open image in new window are same, then Open image in new window yielding a reasonable improvement (double or 3 dB) in SNR performance by new system. Similar approaches can be carried out for other modulation schemes such as QPSK and QAM.
3. Simulation and Results
Gausian 2nd pulse
Over sampling rate
Number of frequency components
BPSK, QPSK, QAM
Number of input data bits
New low power TR-UWB receiver architecture has been introduced. It amalgams existing downconversion-based narrowband rejection mechanism in RF front end and signal processing in frequency domain. A detailed mathematical framework has been formulated for close form expression of SNR that is used to compare the system performance. Theoretical analysis shows that separating the converted UWB pulses into real and imaginary parts, independently correlating and introducing rotation of coordination brings a 3 dB improvement in performance regarding Signal-to-noise-ratio (SNR) using binary modulation. This theoretical conclusion has been verified by performing computer simulation. Additional link level simulations show that the proposed system is also well behaved for higher order adaptive modulation (HOM) by improving 6 dB SNR in every scheme which is really fruitful for WBAN as it requires extremely low power.
This receiver needs perfect tuning while decomposing the received signal to multiple frequency tones within sampler, otherwise, it suffers from interferences and may creates a number of complexities. In future, the performance of this receiver will be investigated introducing synchronization mechanism. Performance evaluation of this proposed system considering fading environments is also a part of our future work.
- 1.Ullah S, Islam SMR, Nessa A, Zhong Y, Kwak KS: Performance analysis of preamble based TDMA protocol for wireless body area network. Journal of Communication Software and Systems 2008., 4(3):Google Scholar
- 4.Lo B, Yang GZ: Key technical challenges and current implementations of body sensor networks. Proceedings of the 2nd IEEE International Workshop on Body Sensor Networks (BSN '05), April 2005 1-5.Google Scholar
- 8.Foerster J, Green E, Somayazulu S, Leeper D: Ultra-wideband technology for short- or medium-range wireless communications. Intel Technology Journal Q2 2001.Google Scholar
- 10.Proakis JG: Digital Communications. 3rd edition. McGraw-Hill, New York, NY, USA; 1995.Google Scholar
- 12.Hoctor RT, Tomlinson HW: Dday-hopped transmitted-reference RF communications. Proceedings of the IEEE Conference on Ultra Wideband System and Technologies, May 2002 265-270.Google Scholar
- 13.Lee S, Bagga S, Serdijn WA: A quadrature downconversion autocorrelation receiver architecture for UWB. Proceedings of the Conference on Ultra Wideband Systems and Technologies (UWBST '04), May 2004 6-10.Google Scholar
- 16.Austrin A: Channel Model for WBAN. IEEE P802.15 Working Group for Wireless Personal Area Networks (WPAN), P802.15-08-0780-06-0006, March 2009Google Scholar
This article is published under license to BioMed Central Ltd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.