Abstract
The charged-particle production ratios \(\bar{p}/p\), K −/K +, π −/π +, \((p + \bar{p})/(\pi^{+} + \pi^{-})\), (K ++K −)/(π ++π −) and \((p + \bar{p})/(K^{+} + K^{-})\) are measured with the LHCb detector using 0.3 nb−1 of pp collisions delivered by the LHC at \(\sqrt{s} = 0.9~\mathrm{TeV}\) and 1.8 nb−1 at \(\sqrt{s} = 7~\mathrm{TeV}\). The measurements are performed as a function of transverse momentum p T and pseudorapidity η. The production ratios are compared to the predictions of several Monte Carlo generator settings, none of which are able to describe adequately all observables. The ratio \(\bar{p}/p\) is also considered as a function of rapidity loss, Δy≡y beam−y, and is used to constrain models of baryon transport.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
1 Introduction
All underlying interactions responsible for pp collisions at the Large Hadron Collider (LHC) and the subsequent hadronisation process can be understood within the context of quantum chromodynamics (QCD). In the non-perturbative regime, however, precise calculations are difficult to perform and so phenomenological models must be employed. Event generators based on these models must be optimised, or ‘tuned’, to reproduce experimental observables. The observables exploited for this purpose include event variables, such as particle multiplicities, the kinematical distributions of the inclusive particle sample in each event, and the corresponding distributions for individual particle species. The generators can then be used in simulation studies when analysing data to search for physics beyond the Standard Model.
The relative proportions of each charged quasi-stable hadron, and the ratio of antiparticles to particles in a given kinematical region, are important inputs for generator tuning. Of these observables, the ratio of antiprotons to protons is of particular interest. Baryon number conservation requires that the disintegration of the beam particles that occurs in high-energy inelastic non-diffractive pp collisions must be balanced by the creation of protons or other baryons elsewhere in the event. This topic is known as baryon-number transport. Several models exist to describe this transport, but it is not clear which mechanisms are most important in driving the phenomenon [1–13]. Pomeron exchange is expected to play a significant role, but contributions may exist from other sources, for example the Odderon, the existence of which has not yet been established [13–15]. Experimentally, baryon-number transport can be studied by measuring \(\bar{ p}/{ p}\), the ratio of the number of produced antiprotons to protons, as a function of suitable kinematical variables.
In this paper results are presented from the LHCb experiment for the following production ratios: \(\bar{ p}/{ p}\), K −/K +, π −/π +, \((p + \bar{p})/(\pi^{+} + \pi^{-})\), (K ++K −)/(π ++π −) and \((p + \bar{p})/(K^{+} + K^{-})\). The first three of these observables are termed the same-particle ratios and the last three the different-particle ratios. Only prompt particles are considered, where a prompt particle is defined to be one that originates from the primary interaction, either directly, or through the subsequent decay of a resonance. The ratios are measured as a function of transverse momentum p T and pseudorapidity η=−ln(tanθ/2), where θ is the polar angle with respect to the beam axis.
Measurements have been performed of the \(\bar{p}/p\) ratio in pp collisions both at the LHC [16], and at other facilities [17–22]. Studies have also been made of the production characteristics of pions, kaons and protons at the LHC at \(\sqrt{s} =0.9~\mathrm{TeV}\) at mid-rapidity [23]. The analysis presented in this paper exploits the unique forward coverage of the LHCb spectrometer, and the powerful particle separation capabilities of the ring-imaging Cherenkov (RICH) system, to yield results for the production ratios in the range 2.5<η<4.5 at both \(\sqrt{s}=0.9~\mathrm{TeV}\) and \(\sqrt{s}=7~\mathrm{TeV}\). LHCb has previously published studies of baryon transport and particle ratios with neutral strange hadrons [24], and results for strange baryon observables at the LHC are also available in the midrapidity region [25, 26]. New analyses have also been made public since the submission of this paper [27].
The paper is organised as follows. Section 2 introduces the LHCb detector and the datasets used. Section 3 describes the selection of the analysis sample, while Sect. 4 discusses the calibration of the particle identification performance. The analysis procedure is explained in Sect. 5. The assignment of the systematic uncertainties is described in Sect. 6 and the results are presented and discussed in Sect. 7, before concluding in Sect. 8. Full tables of numerical results may be found in Appendix. Throughout, unless specified otherwise, particle types are referred to by their name (e.g. proton) when both particles and antiparticles are being considered together, and by symbol (e.g. p or \(\bar{p}\)) when it is necessary to distinguish between the two.
2 Data samples and the LHCb detector
The LHCb experiment is a forward spectrometer at the Large Hadron Collider with a pseudorapidity acceptance of approximately 2<η<5. The tracking system begins with a silicon strip Vertex Locator (VELO). The VELO consists of 23 sequential stations of silicon strip detectors which retract from the beam during injection. A large area silicon tracker (TT) follows upstream of a dipole magnet, downstream of which there are three tracker stations, each built with a mixture of straw tube and silicon strip detectors. The dipole field direction is vertical, and charged tracks reconstructed through the full spectrometer are deflected by an integrated B field of around 4 Tm. Hadron identification is provided by the RICH system, which consists of two detectors, one upstream of the magnet and the other downstream, and is designed to provide particle identification over a momentum interval of 2–100 GeV/c. Also present, but not exploited in the current analysis, are a calorimeter and muon system. A full description of the LHCb detector may be found in [28].
The data sample under consideration derives from the early period of the 2010 LHC run. Inelastic interactions were triggered by requiring at least one track in either the VELO or the tracking stations downstream of the magnet. This trigger was more than 99 % efficient for all offline selected events that contain at least two tracks reconstructed through the whole system. Collisions were recorded both at \(\sqrt{s}=0.9~\mathrm{TeV}\) and 7 TeV. During 0.9 TeV running, where the beams were wider and the internal crossing-angle of the beams within LHCb was larger, detector and machine safety considerations required that each VELO half was retracted by 10 mm from the nominal closed position. For 7 TeV operation the VELO was fully closed.
The analysis exploits a data sample of around 0.3 nb−1 recorded at \(\sqrt{s}= 0.9~\mathrm{TeV}\) and 1.8 nb−1 at \(\sqrt{s}=7~\mathrm{TeV}\). In order to minimise potential detector-related systematic biases, the direction of the LHCb dipole field was inverted every 1–2 weeks of data taking. At 0.9 TeV the data divide approximately equally between the two polarities, while at 7 TeV around two-thirds were collected in one configuration. The analysis is performed separately for each polarity.
The beams collided with a crossing angle in the horizontal plane which was set to compensate for the field of the LHCb dipole. This angle was 2.1 mrad in magnitude at \(\sqrt{s} = 0.9~\mathrm{TeV}\) and 270 μrad at \(\sqrt{s} = 7~\mathrm{TeV}\). Throughout this analysis momenta and any derived quantities are computed in the centre-of-mass frame.
Monte Carlo simulated events are used to calculate efficiencies and estimate systematic uncertainties. A total of around 140 million events are simulated at 0.9 TeV and 130 million events at 7 TeV. The pp collisions are generated by Pythia6.4 [29] and the parameters tuned as described in Ref. [30]. The decays of emerging particles are implemented with the EvtGen package [31], with final state radiation described by Photos [32]. The resulting particles are transported through LHCb by Geant4 [33, 34], which models hits in the sensitive regions of the detector as well as material interactions as described in Ref. [35]. The decay of secondary particles produced in these interactions is controlled by Geant4. Additional Pythia6.4 samples with different generator tunes were produced in order to provide references with which to compare the results. These were Perugia 0, which was tuned on experimental results from SPS, LEP and the Tevatron, and Perugia NOCR, which includes an extreme model of baryon transport [36].
3 Selection of the analysis sample
The measurement is performed using the analysis sample, the selection of which is described here. Understanding of the particle identification (PID) performance provided by the RICH sample is obtained from the calibration sample, which is discussed in Sect. 4.
Events are selected which contain at least one reconstructed primary vertex (PV) within 20 cm of the nominal interaction point. The primary vertex finding algorithm requires at least three reconstructed tracks.Footnote 1
Tracks are only considered that have hits both in the VELO detector and in the tracking stations downstream of the magnet, and for which the track fit yields an acceptable χ 2 per number of degrees of freedom (ndf). In order to suppress background from decays of long-lived particles, or particles produced in secondary interactions, an upper bound is placed on the goodness of fit when using the track’s impact parameter (IP) to test the hypothesis that the track is associated with the PV (\(\chi^{2}_{\mathrm{IP}} < 49\)). To reduce systematic uncertainties in the calculation of the ratio observables, a momentum cut is imposed of p>5 GeV/c, as below this value the cross-section for strong interaction with the beampipe and detector elements differs significantly between particle and anti-particle for kaons and protons. If a pair of tracks, i and j, are found to have very similar momenta (|p i −p j |/|p i +p j |<0.001), then one of the two is rejected at random. This requirement is imposed to suppress ‘clones’, which occur when two tracks are reconstructed from the hit points left by a single particle, and eliminates \({\mathcal{O}}(1~\%)\) of candidates.
The analysis is performed in bins of p T and η. In p T three separate regions are considered: p T<0.8 GeV/c, 0.8≤p T<1.2 GeV/c and p T≥1.2 GeV/c. In η half-integer bins are chosen over the intervals 3.0<η<4.5 for p T<0.8 GeV/c, and 2.5<η<4.5 for higher p T values. The η acceptance is not constant with p T because the limited size of the calibration samples does not allow for the PID performance to be determined with adequate precision below η=3 in the lowest p T bin. The bin size is large compared to the experimental resolution and hence bin-to-bin migration effects are negligible in the analysis.
The RICH is used to select the analysis sample at both energy points from which the ratio observables are determined. A pattern recognition and particle identification algorithm uses information from the RICH and tracking detectors to construct a negative log likelihood for each particle hypothesis (e, μ, π, K or p). This negative log likelihood is minimised for the event as a whole. After minimisation, the change in log likelihood (DLL) is recorded for each track when the particle type is switched from that of the preferred assignment to another hypothesis. Using this information the separation in log likelihood DLL(x−y) can be calculated for any two particle hypotheses x and y, where a positive value indicates that x is the favoured option. In the analysis, cuts are placed on DLL(p−K) versus DLL(p−π) to select protons and on DLL(K−p) versus DLL(K−π) to select kaons. Pions are selected with a simple cut on DLL(π−K). As the RICH performance varies with momentum and track density, different cuts are applied in each (p T,η) bin. The selection cuts are chosen in order to optimise purity, together with the requirement that the identification efficiency be at least 10 %. Figure 1 shows the background-subtracted two-dimensional distribution of DLL(p−K) and DLL(p−π) for protons, kaons and pions in the calibration sample for one example bin. The approximate number of positive and negative tracks selected in each PID category is given in Tables 1 and 2. A charge asymmetry can be observed in many bins, most noticeably for the protons.
Two-dimensional distribution of the change in log likelihood DLL(p−K) and DLL(p−π) for (a) protons, (b) kaons and (c) pions (here shown for negative tracks and one magnet polarity) in the calibration sample with p T>1.2 GeV/c and 3.5<η≤4.0. The region indicated by the dotted lines in the top right corner of each plot is that which is selected in the analysis to isolate the proton sample. The selection of the calibration sample is discussed in Sect. 4
4 Calibration of particle identification
The calibration sample consists of the decaysFootnote 2 \(K^{0}_{\mathrm{S}} \to\pi^{+}\pi^{-}\), Λ→pπ − and ϕ→K + K −, all selected from the 7 TeV data. The signal yields in each category are 4.7 million, 1.4 million and 5.5 million, respectively.
The \(K^{0}_{\mathrm{S}}\) and Λ (collectively termed V 0) decays are reconstructed through a selection algorithm devoid of RICH PID requirements, identical to that used in Ref. [24], providing samples of pions and protons which are unbiased for PID studies. The purity of the samples varies across the p T and η bins, but is found always to be in excess of 83 % and 87 %, for \(K^{0}_{\mathrm{S}}\) and Λ, respectively. Isolating ϕ→K + K − decays with adequate purity is only achievable by exploiting RICH information. A PID requirement of DLL(K−π)>15 is placed on one of the two kaon candidates, chosen at random, so as to leave the other candidate unbiased for calibration studies. The purity of this selection ranges from 17 % to 68 %, over the kinematic range. Examples of the invariant mass distributions obtained in a typical analysis bin for each of the three calibration modes are shown in Fig. 2.
Invariant mass distributions reconstructed for one magnet polarity from the \(\sqrt{s}=7~\mathrm{TeV}\) data in the analysis bin for which the positive final-state particle has p T≥1.2 GeV and 3.5≤η<4.0 for (a) \(K^{0}_{\mathrm{S}} \to \pi^{+}\pi^{-}\), (b) Λ→pπ − and (c) ϕ→K + K −. The results of unbinned maximum likelihood fits to the data are superimposed
In order to study the PID performance on the unbiased K ± tracks associated with genuine ϕ decays the sPlot [37] technique is employed, using the invariant mass as the uncorrelated discriminating variable, to produce distributions of quantities such as the RICH DLL(K−π). Although the background contamination in the V 0 selections is small in comparison, the same strategy is employed to extract the true DLL distributions from all unbiased track samples in each analysis bin. The two V 0 signal peaks are parameterised by a double Gaussian function, while the strongly decaying ϕ is described by a Breit-Wigner function convoluted with a Gaussian. The background is modelled by a first and third order Chebyshev polynomial for the V 0 and ϕ distributions, respectively.
The resulting distributions cannot be applied directly to the analysis sample for two reasons. The first is that the PID performance varies with momentum, and the finite size of the (p T, η) bins means that the momentum spectrum within each bin is in general different between the calibration and analysis samples. The second is that the PID performance is also dependent on multiplicity, and here significant differences exist between the calibration and analysis samples, most noticeably for the 0.9 TeV data. To obtain rates applicable to the 0.9 TeV and 7 TeV analysis samples, it is therefore necessary to reweight the calibration tracks such that their distributions in momentum and track multiplicity match those of a suitable reference sample. A single reference sample cannot be adopted for all particle types, as the unbiased momentum spectrum is in general different particle-to-particle. For this reason, the analysis samples are used, but with the final selection replaced by looser PID requirements. This modified selection minimises distortions to the momentum spectra, while providing sufficient purity for the differences in distributions between particle species to be still evident. In each (p T, η) bin the reference and calibration samples are subdivided into six momentum and four track multiplicity cells, and the relative proportion of tracks within each cell is used to calculate a weight. The PID performance as determined from the calibration samples after reweighting is then applied in the analysis.
The reliability of the calibration can be assessed by comparing the results for the measured PID efficiencies from a Monte Carlo simulated calibration sample, after background subtraction and reweighting, to the true values in the Monte Carlo analysis sample. The results are shown in Fig. 3, where each entry comes from a separate (p T, η) bin. In general good agreement is observed over a wide range of working points, with some residual biases seen at low p T. These biases can be attributed to minor deficiencies in the reweighting procedure, which are expected to be most prevalent in this region.
Monte Carlo PID efficiency study for protons (a), kaons (b) and pions (c). Shown is a comparison of measured efficiencies from a Monte Carlo calibration sample, after background subtraction and reweighting, with the true values in the Monte Carlo analysis sample. The diagonal line on each plot is drawn with unit gradient
5 Analysis procedure
The number of particles, \(N^{\mathrm{S}}_{i}\), selected in each of the three classes i=p,K or π, is related to the true number of particles before particle identification, \(N^{\mathrm{T}}_{i}\), by the relationship
where the matrix element ϵ i→j is the probability of identifying particle type i as type j. This expression is valid for the purposes of the measurement since the fraction of other particle types, in particular electrons and muons, contaminating the selected sample is negligible. As \(N^{\mathrm{S}}_{i}\) and ϵ i→j are known, the expression can be inverted to determine \(N^{\mathrm{T}}_{i}\). This is done for each (p T,η) bin, at each energy point and magnet polarity setting. After this step (and including the low p T scaling factor correction discussed below) the purities of each sample can be calculated. Averaged over the analysis bins the purities at 0.9 TeV (7 TeV) are found to be 0.90 (0.84), 0.89 (0.87) and 0.98 (0.97) for the protons, kaons and pions, respectively.
In order to relate \(N^{\mathrm{T}}_{i}\) to the number of particles produced in the primary interaction it is necessary to correct for the effects of non-prompt contamination, geometrical acceptance losses and track finding inefficiency. The non-prompt correction, according to simulation, is typically 1–2 %, and is similar for positive and negative particles. The most important correction when calculating the particle ratios is that related to the track finding inefficiency, as different interaction cross-sections and decays in flight mean that this effect does not in general cancel. All correction factors are taken from simulation, and are applied bin-by-bin, after which the particle ratios are determined. The corrections typically lead to a change of less than a relative 10 % on the ratios.
The analysis procedure is validated on simulated events in which the measured ratios are compared with those expected from generator level. A χ 2 is formed over all the η bins at low p T, summed over the different-particle ratios. Good agreement is found for the same-particle ratios over all η and p T, and for the different-particle ratios at mid and high p T. Discrepancies are however observed at low p T for the different-particle ratios, which are attributed to imperfections in the PID reweighting procedure for this region. The χ 2 in the low p T bin is then minimised by applying charge-independent scaling factors of 1.33 (1.10) and 0.90 (0.86) for the proton and kaon efficiencies, respectively, at 0.9 TeV (7 TeV). An uncertainty of ±0.11 is assigned to the scaling factors, uncorrelated bin-to-bin, in order to obtain χ 2/ndf≈1 at both energy points. This uncertainty is fully correlated between positive and negative tracks. Although no bias is observed at mid and high p T, an additional relative uncertainty of ±0.03 is assigned to the proton and kaon efficiencies for these bins to yield an acceptable scatter (i.e. χ 2/ndf≈1). This uncertainty is also taken to be uncorrelated bin-to-bin, but fully correlated between positive and negative tracks. The scaling factors and uncertainties from these studies are adopted for the analysis of the data.
6 Systematic uncertainties
The contribution to the systematic uncertainty of all effects considered is summarised in Tables 3 and 4 for the same-particle ratios, and in Tables 5 and 6 for the different-particle ratios.
The dominant uncertainty is associated with the understanding of the PID performance. Each element in the identification matrix (Eq. (1)), is smeared by a Gaussian of width corresponding to the uncertainty in the identification (or misidentification) efficiency of that element, and the full set of particle ratios is recalculated. This uncertainty is the sum in quadrature of the statistical error from the calibration sample after reweighting, as discussed in Sect. 4, and the additional uncertainty assigned after the analysis validation, described in Sect. 5. The procedure is repeated many times and the width of the resulting distributions is assigned as the systematic uncertainty. As can be seen in Tables 3–6 there is a large range in the magnitude of this contribution. The uncertainty is smallest at high p T and η, on account of the distribution of the events in the calibration sample. For each observable the largest value is found in the lowest η bin at mid-p T. If this bin and the lowest η bin at low p T are discounted, the variation in uncertainty of the remainder of the acceptance is much smaller, being typically a factor of two or three.
Knowledge of the interaction cross-sections and the amount of material encountered by particles in traversing the spectrometer is necessary to determine the fraction of particles that cannot be reconstructed due to having undergone a strong interaction. The interaction cross-sections as implemented in the LHCb simulation agree with measurements [38] over the momentum range of interest to a precision of around 20 % for protons and kaons, and 10 % for pions. The material description up to and including the tracking detectors is correct within a tolerance of 10 %. The effect of these uncertainties is propagated through in the calculation of the track loss for each particle type from strong interaction effects.
The detection efficiency of positive and negative tracks need not be identical due to the fact that each category is swept by the dipole field, on average, to different regions of the spectrometer. Studies using J/ψ→μ + μ − decays in which one track is selected by muon chamber information alone constrain any charge asymmetry in the track reconstruction efficiency to be less than 1.0 (0.5) % for the 0.9 (7) TeV data. These values are used to assign systematic uncertainties on the particle ratios. The identification efficiencies in the RICH system are measured separately for each charge, and so this effect is accounted for in the inputs to the analysis. A cross-check that there are no significant reconstruction asymmetries left unaccounted for is provided by a comparison of the results obtained with the two polarity settings of the dipole magnet. Consistent results are found for all observables.
A possible source of bias arises from the contribution of ‘ghost’ tracks; these are tracks which have no correspondence with the trajectory of any charged particle in the event, but are reconstructed from the incorrect association of hit points in the tracking detectors. Systematic uncertainties are therefore assigned in each (p T ,η) bin for each category of ratio by subtracting the estimated contribution of ghost tracks for each particle assignment, and determining the resulting shifts in the calculated ratios. A sample enriched in ghost tracks can be obtained by selecting tracks where the number of hits associated with the track in the TT detector is significantly less than that expected for a particle with that trajectory. Comparison of the fraction of tracks of this nature in data and simulation is used to determine the ghost-track rate in data by scaling the known rate in simulation. This exercise is performed independently for identified tracks which are above and below the Cherenkov threshold in the RICH system. The contamination from ghost tracks is lower in the above-threshold category since the presence of photodetector hits is indicative of a genuine track. The total ghost-track fraction for pions and kaons is found to be typically below 1 %, rising to around 2 % in certain bins. The ghost-track fraction for protons rises to 5 % in some bins, on account of the larger fraction of this particle type lying below the RICH threshold. The charge asymmetry for this background is found to be small and the assigned systematic uncertainty is in general around 0.1 %. To provide further confirmation that ghost tracks are not a significant source of bias the analysis is repeated with different cut values on the track-fit χ 2/ndf and stable results are found.
Clones are suppressed by the requirement that only one track is retained from pairs of tracks that have very similar momentum. The analysis is repeated with the requirement removed, and negligible changes are seen for all observables.
Contamination from non-prompt particles induces a small uncertainty in the measurement, as this source of background is at a low level and cancels to first order in the ratios. The error is assigned by repeating the analysis and doubling the assumed charge asymmetry of these tracks compared with the value found from the simulation. No significant variations are observed when the analysis is repeated with different cut values on the prompt-track selection variable \(\chi ^{2}_{\mathrm{IP}}\).
The total systematic uncertainty for each observable is obtained by summing in quadrature the individual contributions in each (p T, η) bin. In general, the systematic uncertainty is significantly larger than the statistical uncertainty, with the largest contribution coming from the knowledge of the PID performance, which is limited by the size of the calibration sample.
7 Results
The measurements of the same-particle ratios are plotted in Figs. 4, 5 and 6, and those of the different-particle ratios in Figs. 7, 8 and 9. The numerical values can be found in Appendix. Also shown are the predictions of several Pythia6.4 generator settings, or ‘tunes’: LHCb MC [30], Perugia 0 and Perugia NOCR [36]. At 0.9 TeV the \(\bar{p}/p\) ratio falls from around 0.8 at low η to around 0.4 in the highest p T and η bin. At this energy point there is a significant spread between models for the Monte Carlo predictions, with the data lying significantly below the LHCb MC and Perugia 0 expectations, but close to those of Perugia NOCR. At higher energy the \(\bar{p}/p\) ratio is higher and varies more slowly, in good agreement with LHCb MC and Perugia 0 and less so with Perugia NOCR. The K −/K + and π −/π + ratios also differ from unity, most noticeably at high p T and high η. This behaviour is in general well modelled by all the generator tunes, which give similar predictions for these observables. Small discrepancies are observed at 7 TeV for K −/K + at low p T, and π −/π + at high p T. When comparing the measurements and predictions for the different-particle ratios the most striking differences occur for \((p + \bar{p})/(\pi^{+} + \pi^{-})\) and (K ++K −)/(π ++π −), where there is a tendency for the data to lie significantly higher than the Perugia 0 and NOCR expectations. The agreement with the LHCb MC for these observables is generally good.
It is instructive to consider the \(\bar{p}/p\) results as a function of rapidity loss, Δy≡y beam−y, where y beam is the rapidity of the protons in the LHC beam which travels forward in the spectrometer (y beam=6.87 at 0.9 TeV and 8.92 at 7 TeV). For the same-particle ratios it is possible to determine the rapidity value to which the measurement in each η bin corresponds. In each bin the mean and RMS spread of the rapidity of the tracks in the analysis sample is determined. Correlations are accounted for, but these are in general negligible as the uncertainties are dominated by the PID errors, which for these observables are statistical in nature. A small correction is applied to this mean, obtained from Monte Carlo, to account for the distortion to the unbiased spectrum that is induced by the reconstruction and PID requirements. The values of the mean and RMS spread of the rapidities for \(\bar{p}/p\) can be found in Appendix, together with those of K −/K + and π −/π +. As no evidence is seen of any p T dependence in the distribution of the \(\bar{p}/p\) results against Δy the measurements in each η bin at each energy point are integrated over p T, with the uncertainties on the individual values of the ratios used to determine the weights of each input entering into the mean. The mean \(\bar{p}/p\) ratios are given as a function of Δy in Table 7 and plotted in Fig. 10, with the results from other experiments [16–21] superimposed. The LHCb results cover a wider range of Δy than any other single experiment and significantly improve the precision of the measurements in the region Δy<6.5.
Within the Regge model, baryon production at high energy is driven by Pomeron exchange and baryon transport by string-junction exchange [9]. Assuming this picture the Δy dependence of the \(\bar {p}/p\) ratio approximately follows the form \(1/ \left( 1 + C \exp [(\alpha_{J} - \alpha_{P}) \Delta y] \right)\), where C determines the relative contributions of the two mechanisms, and α J (α P ) is the intercept of the string junction (Pomeron) Regge trajectory. Figure 10 shows the results of fitting this expression to both the LHCb and, in order to constrain the high Δy region, the ALICE data. Both C and (α J −α P ) are free parameters of the fit and are determined to be 22.5±6.0 and −0.98±0.07 respectively with a χ 2/ndf of 8.7/8. Taking α P =1.2 [39] suggests a low value of α J , significantly below the α J ≈0.5 expected if the string-junction intercept is associated with that of the standard Reggeon (or meson). The value of α J ≈0.9 which would be expected if the string junction is associated with the Odderon [13] is excluded using this fit model. The same conclusion applies if the LHCb and ALICE \(\bar{p}/p\) ratio values are fitted with an alternative parameterisation [11] \(C^{\prime}\cdot(s [{\mathrm{GeV}}^{2}])^{(\alpha_{J} - \alpha_{P})/2}\cdot \cosh[y (\alpha_{J} - \alpha_{P}) ]\), which yields the results C′=10.2±1.8, (α J −α P )=−0.86±0.05 with a χ 2/ndf of 10.2/8.
8 Conclusions
Measurements have been presented of the charged-particle production ratios \(\bar{ p}/{ p}\), K −/K +, π −/π +, \((p + \bar{p})/(K^{+} + K^{-})\), (K ++K −)/(π ++π −) and \((p + \bar{p})/(\pi^{+} + \pi^{-})\) at both \(\sqrt{s} =0.9~\mathrm{TeV}\) and \(\sqrt{s} =7~\mathrm{TeV}\). The results at 7 TeV are the first studies of pion, kaon and proton production to be performed at this energy. Comparisons have been made with several generator tunes (LHCb MC, Perugia 0 and Perugia NOCR). No single tune is able to describe well all observables. The most significant discrepancies occur for the \((p + \bar{p})/(\pi^{+} + \pi^{-})\) and (K ++K −)/(π ++π −) ratios, where the measurements are much higher than the Perugia 0 and Perugia NOCR predictions, but lie reasonably close to the LHCb MC expectation.
The \(\bar{p}/p\) ratio has been studied as a function of rapidity loss, Δy. The results span the Δy interval 3.1 to 6.3, and are more precise than previous measurements in this region. Fitting a simple Regge theory inspired model to the LHCb measurements, and those from the midrapidity region obtained by ALICE [16], yields a result with a string-junction contribution with low intercept value.
These results, together with those for related observables obtained by LHCb [24], will help in understanding the phenomenon of baryon-number transport, and the development of hadronisation models to improve the description of Standard Model processes in the forward region at the LHC.
Notes
The PV requirement can be approximated in Monte Carlo simulation by imposing a filter at generator level which demands at least three charged particles with lifetime cτ>10−9 m, momentum p>0.3 GeV/c and polar angle 15<θ<460 mrad.
In this section the inclusion of the charge conjugate decay \(\bar{\varLambda} \to\bar {p} \pi^{+} \) is implicit.
References
G.C. Rossi, G. Veneziano, A possible description of baryon dynamics in dual and gauge theories. Nucl. Phys. B 123, 507 (1977)
A.B. Kaidalov, K.A. Ter-Martirosyan, Multihadron production at high energies in the model of quark gluon strings. Sov. J. Nucl. Phys. 40, 135 (1984)
X. Artru, String model with baryons: topology, classical motion. Nucl. Phys. B 85, 442 (1975)
M. Imachi, S. Otsuki, F. Toyoda, Color constraint on urbaryon rearrangement diagram. Prog. Theor. Phys. 52, 1061 (1974)
M. Imachi, S. Otsuki, F. Toyoda, Orientable hadron structure. Prog. Theor. Phys. 54, 280 (1975)
B.Z. Kopeliovich, Mechanisms of \(\bar{p} p\) interaction at low and high energies. Sov. J. Nucl. Phys. 45, 1078 (1987)
B. Kopeliovich, B. Povh, Baryon asymmetry of the proton sea at low x. Z. Phys. C 75, 693 (1997). arXiv:hep-ph/9607486
B. Kopeliovich, B. Povh, Baryon stopping at HERA: evidence for gluonic mechanism. Phys. Lett. B 446, 321 (1999). arXiv:hep-ph/9810530
D. Kharzeev, Can gluons trace baryon number? Phys. Lett. B 378, 238 (1996). arXiv:nucl-th/9602027
G.H. Arakelyan et al., Midrapidity production of secondaries in pp collisions at RHIC and LHC energies in the quark-gluon string model. Eur. Phys. J. C 54, 577 (2008). arXiv:0709.3174
C. Merino, M.M. Ryzhinskiy, Y.M. Shabelski, Odderon effects in pp collisions: predictions for LHC energies. arXiv:0906.2659
S.E. Vance, M. Gyulassy, Anti-hyperon enhancement through baryon junction loops. Phys. Rev. Lett. 83, 1735 (1999). arXiv:nucl-th/9901009
C. Merino, C. Pajares, M.M. Ryzhinskiy, Y.M. Shabelski, Pomeron and odderon contributions at LHC energies. arXiv:1007.3206
L. Lukaszuk, B. Nicolescu, A possible interpretation of pp rising total cross-sections. Lett. Nuovo Cimento 8, 405 (1973)
R. Avila, P. Gauron, B. Nicolescu, How can the odderon be detected at RHIC and LHC. Eur. Phys. J. C 49, 581 (2007). arXiv:hep-ph/0607089
K. Aamodt et al. (ALICE Collaboration), Midrapidity antiproton-to-proton ratio in pp collisions at \(\sqrt{s} = 0.9\mbox{ and }7~\mathrm{TeV}\) measured by the ALICE experiment. Phys. Rev. Lett. 105, 072002 (2010). arXiv:1006.5432
A.M. Rossi et al., Experimental study of the energy dependence in proton proton inclusive reactions. Nucl. Phys. B 84, 269 (1975)
I.G. Bearden et al. (BRAHMS Collaboration), Forward and midrapidity like-particle ratios from p+p collisions at \(\sqrt{s} = 200~\mathrm{GeV}\). Phys. Lett. B 607, 42 (2005). arXiv:nucl-ex/0409002
S.S. Adler et al. (PHENIX Collaboration), Nuclear effects on hadron production in d+Au collisions at \(\sqrt{s_{NN}} =200~\mathrm{GeV}\) revealed by comparison with p+p data. Phys. Rev. C 74, 024904 (2006). arXiv:nucl-ex/0603010
B.B. Back et al. (PHOBOS Collaboration), Charged antiparticle to particle ratios near midrapidity in p+p collisions at \(\sqrt{s}_{NN}= 200~\mathrm{GeV}\). Phys. Rev. C 71, 021901 (2005). arXiv:nucl-ex/0409003
B.I. Abelev et al. (STAR Collaboration), Systematic measurements of identified particle spectra in pp, d+Au and Au+Au collisions at the STAR detector. Phys. Rev. C 79, 034909 (2009). arXiv:0808.2041
T. Anticic et al. (NA49 Collaboration), Inclusive production of protons, anti-protons and neutrons in p+p collisions at 158 GeV/c beam momentum. Eur. Phys. J. C 65, 9 (2010). arXiv:0904.2708
K. Aamodt et al. (ALICE Collaboration), Production of pions, kaons and protons in pp collisions at \(\sqrt{s}=900~\mathrm{GeV}\) with ALICE at the LHC. Eur. Phys. J. C 71, 1655 (2011). arXiv:1101.4110
R. Aaij et al. (LHCb Collaboration), Measurement of V 0 production ratios in pp collisions at \(\sqrt{s} = 0.9\mbox{ and }7~\mathrm{TeV}\). J. High Energy Phys. 08, 034 (2011). arXiv:1107.0882
G. Aad et al. (ATLAS Collaboration), \(K^{0}_{S}\) and Λ production in pp interactions at \(\sqrt{s} = 0.9\) and 7 TeV measured with the ATLAS detector at the LHC. Phys. Rev. D 85, 012001 (2012). arXiv:1111.1297
B. Abelev et al. (ALICE Collaboration), Multi-strange baryon production in pp collisions at \(\sqrt{s}=7~\mathrm{TeV}\) with ALICE. arXiv:1204.0282
S. Chatrchyan et al. (CMS Collaboration), Study of the inclusive production of charged pions, kaons, and protons in pp collisions at \(\sqrt{s} = 0.9,\ 2.76,\ \mathrm{and}\ 7~\mathrm{TeV}\). arXiv:1207.4724
A.A. Alves Jr. et al. (LHCb Collaboration), The LHCb detector at the LHC. J. Instrum 3, S08005 (2008)
T. Sjöstrand, S. Mrenna, P. Skands, PYTHIA 6.4 physics and manual. J. High Energy Phys. 05, 026 (2006). arXiv:hep-ph/0603175
I. Belyaev et al., Handling of the generation of primary events in Gauss, the LHCb simulation framework, in Nuclear Science Symposium Conference Record (NSS/MIC) (IEEE, New York, 2010), p. 1155
D.J. Lange, The EvtGen particle decay simulation package. Nucl. Instrum. Methods Phys. Res. A 462, 152 (2001)
P. Golonka, P. Was, A precision tool for QED corrections in Z and W decays. Eur. Phys. J. C 45, 97 (2006). arXiv:hep-ph/0506026
S. Agostinelli et al. (GEANT4 Collaboration), GEANT4: A simulation toolkit. Nucl. Instrum. Methods Phys. Res. A 506, 250 (2003)
J. Allison et al. (GEANT4 Collaboration), GEANT4 developments and applications. IEEE Trans. Nucl. Sci. 53, 270 (2006)
M. Clemencic et al., The LHCb simulation application, gauss: design, evolution and experience. J. Phys. Conf. Ser. 331, 032023 (2011)
P.Z. Skands, Tuning Monte Carlo generators: the Perugia tunes. Phys. Rev. D 82, 074018 (2010)
M. Pivk, F.R. Le Diberder, sPlot: a statistical tool to unfold data distributions. Nucl. Instrum. Methods Phys. Res. A 555, 356 (2005). arXiv:physics/0402083
IHEP Protvino, COMPAS database http://wwwppds.ihep.su:8001/ppds.html
A.B. Kaidalov, L.A. Ponomarev, K.A. Ter-Martirosyan, Total cross-sections and diffractive scattering in a theory of interacting pomerons with α P (0)>1. Sov. J. Nucl. Phys. 44, 468 (1986)
Acknowledgements
We thank Yuli Shabelski for several useful discussions. We express our gratitude to our colleagues in the CERN accelerator departments for the excellent performance of the LHC. We thank the technical and administrative staff at CERN and at the LHCb institutes, and acknowledge support from the National Agencies: CAPES, CNPq, FAPERJ and FINEP (Brazil); CERN; NSFC (China); CNRS/IN2P3 (France); BMBF, DFG, HGF and MPG (Germany); SFI (Ireland); INFN (Italy); FOM and NWO (The Netherlands); SCSR (Poland); ANCS (Romania); MinES of Russia and Rosatom (Russia); MICINN, XuntaGal and GENCAT (Spain); SNSF and SER (Switzerland); NAS Ukraine (Ukraine); STFC (United Kingdom); NSF (USA). We also acknowledge the support received from the ERC under FP7 and the Region Auvergne.
Author information
Authors and Affiliations
Consortia
Appendix: Tables of results
Appendix: Tables of results
The results for the same-particle ratios, including the rapidity to which the events in each pseudorapidity bin correspond, are given in Tables 8, 9 and 10. The results for the different-particle ratios can be found in Tables 11, 12 and 13.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
The LHCb Collaboration., Aaij, R., Abellan Beteta, C. et al. Measurement of prompt hadron production ratios in pp collisions at \(\sqrt{s} = 0.9\mbox{ and }7~\mathrm{TeV}\) . Eur. Phys. J. C 72, 2168 (2012). https://doi.org/10.1140/epjc/s10052-012-2168-x
Received:
Revised:
Published:
DOI: https://doi.org/10.1140/epjc/s10052-012-2168-x