Abstract
A method for mathematical description of local stress condition and formation of plastic zones near spherical pores formed at room temperature in the volume of low-alloy structural steels during their electrolytic hydrogen saturation under stress is proposed. The impact of external tension stress and pressure of gases (hydrogen and methane) in pores is taken into account. The method is promising for specification of kinetic parameters of destruction processes in structural steels under conditions of hydrogen stress corrosion.
Similar content being viewed by others
References
Sergeev, N.N., Chukanov, A.N., Baranov, V.P., and Yakovenko, A.A., Development of damage and decarburization of high-strength low-alloy steels under hydrogen embrittlement, Met. Sci. Heat Treat., 2015, vol. 57, nos. 1–2, pp. 63–68.
Chukanov, A.N., Sergeev, N.N., Tikhonova, I.V., Yakovenko, A.A., and Leont’ev, I.M., Relationship of damageability and redistribution of impurities in constructional steels under deformation and corrosion, Deform. Razrushenie Mater., 2015, no. 6, pp. 37–42.
Davydov, Yu.I., Ageev, V.S., and Sergeev, N.N., Decarburization of steel in an aggressive environment, Tekhnol. Mashinostr., 1974, no. 35, pp. 145–152.
Kolachev, B.A., Vodorodnaya khrupkost’ metallov (Hydrogen Embrittlement of Metals), Moscow: Metallrugiya, 1985.
Chukanov, A.N., Levin, D.M., and Yakovenko, A.A., Use of and prospects for the internal friction method in assessing the degradation and destruction of iron-carbon alloys, Bull. Russ. Acad. Sci.: Phys., 2011, vol. 75, no. 10, pp. 1340–1344.
Chukanov, A.N., Sergeev, N.N., Tereshin, V.A., Rostovtsev, R.N., Yakovenko, A.A., and Leont’ev, I.M., Thermodynamic substantiation of the “methane” mechanism of destruction of reinforced structural steels in electrolytic hydrogenation under stress, Deform. Razrushenie Mater., 2015, no. 10, pp. 32–39.
Leont’ev, I.M., Chukanov, A.N., Sergeev, N.N., and Yakovenko, A.A., Decarburization, hydrogen embrittlement and aging of high-strength steels under electrolytic hydrogenation, Materialy mezhdunarodnoi konferentsii “XXI Peterburgskie chteniya po problemam prochnosti,” 15–17 aprelya 2014 g. (Proc. Int. Conf. “XXI St. Petersburg Conf. on Durability,” April 15–17, 2014), St. Petersburg, 2014, pp. 194–197.
Landau, L.D. and Lifshitz, E.M., The Course of Theoretical Physics, Vol. 7: Theory of Elasticity, London: Pergamon, 1970.
Vladimirov, V.I., Fizicheskaya priroda razrusheniya metallov (Physical Character of Metal Destruction), Moscow: Metallurgiya, 1984.
Sveshnikov, A.G. and Tikhonov, A.N., Teoriya funktsii kompleksnoi peremennoi (The Theory of Functions of Complex Variable), Moscow: Fizmatlit, 2010.
Knott, J.F., Fundamentals of Fracture Mechanics, London: Butterworths, 1973.
Nadai, A., Theory of Flow and Fracture of Solids, New York: McGraw-Hill, 1950.
Gvozdev, A.E., Kolmakov, A.G., Kuzovleva, O.V., Sergeev, N.N., and Tikhonova, I.V., Mechanical properties of structural and tool steels in the pre-transformation under thermomechanical action, Deform. Razrushenie Mater., 2013, no. 11, pp. 39–42.
Gvozdev, A.E., Kolmakov, A.G., Malyarov, A.V., Sergeev, N.N., Tikhonova, I.V., and Prutskov, M.E., Cementite instability in the thermocycling of carbon steels, Materialovedenie, 2014, no. 10, pp. 48–55.
Gvozdev, A.E., Golyshev, I.V., Minayev, I.V., Sergeyev, A.N., Sergeyev, N.N., Tikhonova, I.V., Khonelidze, D.M., and Kolmakov, A.G., Multiparametric optimization of laser cutting of steel sheets, Inorg. Mater.: Appl. Res., 2015, vol. 6, no. 4, pp. 305–310.
Gvozdev, A.E., Kolmakov, A.G., Provotorov, D.A., Sergeev, N.N., and Bogolyubova, D.N., Dependence of superplasticity indices of hard-deformed steels R6M5 and 10R6M5-MR on the stress state scheme, Deform. Razrushenie Mater., 2015, no. 11, pp. 42–46.
Gvozdev, A.E., Zhuravlev, G.M., and Kolmakov, A.G., Mechanical properties of carbon steels in drawing processes with thinning, Tekhnol. Met., 2015, no. 11, pp. 17–31.
Gvozdev, A.E., Kolmakov, A.G., Malyarov, A.V., Sergeev, N.N., and Tikhonova, I.V., Heterogeneous nucleation of graphite in carbon steels during the decomposition of cementite in the TCO process near the A0 point, Materialovedenie, 2013, no. 10, pp. 48–52.
Gvozdev, A.E., Sergeyev, N.N., Minayev, I.V., Kolmakov, A.G., Tikhonova, I.V., Sergeyev, A.N., Provotorov, D.A., Khonelidze, D.M., Maliy, D.V., and Golyshev, I.V., Temperature distribution and structure in the heat-affected zone for steel sheets after laser cutting, Inorg. Mater.: Appl. Res., 2017, vol. 8, no. 1, pp. 148–152.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.N. Sergeev, V.A. Tereshin, A.N. Chukanov, A.G. Kolmakov, A.A. Yakovenko, A.N. Sergeev, I.M. Leont’ev, D.M. Khonelidze, A.E. Gvozdev, 2017, published in Materialovedenie, 2017, No. 12, pp. 18–25.
Rights and permissions
About this article
Cite this article
Sergeev, N.N., Tereshin, V.A., Chukanov, A.N. et al. Formation of Plastic Zones near Spherical Cavity in Hardened Low-Carbon Steels under Conditions of Hydrogen Stress Corrosion. Inorg. Mater. Appl. Res. 9, 663–669 (2018). https://doi.org/10.1134/S2075113318040354
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113318040354