Abstract
This article provides an overview of the stages of occurrence and development of the manufacturing of domestic hard alloys. It describes the contribution of domestic scientists to the development of various brands of hard alloys and establishment of their production. It shows the outstanding role of G.A. Meerson in the development of the hard-metal industry.
Similar content being viewed by others
References
Tret’yakov, V.I., Osnovy metallovedeniya i tekhnologii proizvodstva spechennykh tverdykh splavov (Fundamentals of Metal Science and Production Technology of Sintered Solid Alloys), Moscow: Metallurgiya, 1976.
Panov, V.S., Chuvilin, A.M., and Fal’kovskii, V.A., Tekhnologiya i svoistva spechennykh tverdykh splavov i izdelii is nikh (Technology and Properties of Sintered Solid Alloys and Their Products), Moscow: Mosk. Inst. Stali Splavov, 2004.
Mal’kov, L.P. and Khokhlova, A.V., Tverdye splavy (Solid Alloys), Moscow: Redkie Metally, 1935.
Zarubin, N.M. and Mal’kov, L.P., The structure of WC–TaC(NbC)–Co alloys, Vestn. Metalloprom., 1934, no. 7, pp. 59–62.
Rakovskii, V.S., Metallokeramicheskie tverdye splavy i ikh svoistva (Metalloceramic Solid Alloys and Their Properties), Moscow: Oborongiz, 1944.
Rakovskii, V.S., Samsonov, G.V., and Ol’khov, I.I., Osnovy proizvodstva tverdykh splavov (Fundamentals of Production of Hard Alloys), Moscow: Metallurgizdat, 1960.
Tret’yakov, V.I. and Klyachko, L.I., K istorii tverdykh splavov (The History of Solid Alloys), Moscow: Vizavi, 1998.
Samsonov, G.V. and Vitryanyuk, V.K., Sovremennoe sostoyanie i perspektiva razvitiya tverdykh splavov (Current State and Prospective Development of Solid Alloys), Kiev: Naukova Dumka, 1971.
Panov, V.S., G.A. Meerson: the founder of the national production of hard alloys and powder high-speed steel, Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., 2001, no. 6, pp. 40–46.
Panov, V.S., Libenson, G.A., and Rakova, N.N., G.A. Meerson cherez prizmu vremeni (G.A. Meerson through the Time), Perm: Minist. Obraz. RF, 2003, pp. 53–66.
Ivensen, V.A. and Loseva, S.S., Submicron solid alloys, Izv. VUZov, Poroshk. Metall. Funkts. Pokrytiya, 1963, no. 3, pp. 37–45.
Fal’kovskii, V.A., Development of hard alloys for chipless processing of metals, Extended Abstract of Doctoral (Eng.) Dissertation, Moscow: Natl. Univ. Sci. Technol., MISIS, 1997.
Meerson, G.A. and Panov, V.S., Uluchshennye marki tverdykh splavov (Improved Grades of Solid Alloys), Moscow: Gos. Nauchno-Issled. Inst. Nauch. Tekh. Inf., 1969.
Panov, V.S., Meerson, G.A., and Funke, V.F., The structure and physical-mechanical properties of WC–TaC–Co alloys, Izv. Akad. Nauk SSSR, Met., 1966, no. 2, pp. 213–215.
Panov, V.S., The role of tantalum carbide in WC–Co alloys, Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., 1969, no. 14, pp. 27–30.
Panov, V.S. and Meerson, G.A., Possible substitution of tantalum carbide with niobium carbide, Izv. Akad. Nauk SSSR, Met., 1972, no. 2, pp. 181–184.
Panov, V.S. and Glushkov, V.N., High-performance production of fine-grained tungsten powder, Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., 1971, no. 8, pp. 35–39.
Meerson, G.A., Kiparisov, S.S., Panov, V.S., and Glushkov, V.N., The properties of the T15K6 alloy based on a “direct flow” tungsten powder, Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., 1978, no. 3, pp. 37–38.
Kreimer, B.S., New grades of hard alloys, Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, Metall. Topl., 1960, vol. 4, pp. 18–22.
Meerson, G.A., Kiparisov, S.S., and Panov, V.S., The effect of refractory carbides on the properties of cutting tools, Poroshk. Metall., 1975, no. 10, pp. 27–30.
Kobitskoi, I.V., Emel’yanova, T.A., and Klyachko, L.I., Analysis of specific fine-grained hard alloys doped with refractory metal carbides, Tsvetn. Met., 1998, no. 8, pp. 58–60.
Klyachko, L.I., Multicarbide WC–Co hard alloys, Proc. the 15th Int. Plansee Seminar, Plansee, 2001, vol. 56, no. 11, pp. 24–27.
Fal’kovskii, V.A. and Klyachko, L.I., Tverdye splavy (Solid Alloys), Moscow: Ruda i Metally, 2005.
Tret’yakov, V.I. and Klyachko, L.I., Tverdye splavy, tugoplavkie metally, sverkhtverdye materialy (Hard Alloys, Refractory Metals, and Superhard Materials), Moscow: Ruda i Metally, 1999.
Plaksin, E.K., Research and development of technology of hard alloys based on titanium carbonitride, Cand. Sci. (Eng.) Dissertation, Moscow: Moscow State Univ. Fine Chem. Technol., 1977.
Muzykant, Ya.A. and Samoilov, V.S., Rezhushchie instrumenty s plastinami iz bezvol’framovykh tverdykh splavov (Cutting Tools with Plates from Non-Tungsten Hard Alloys), Moscow: Nauchno-Issled. Inst. Mashinostr., 1984, pp. 56–58.
Panov, V.S., Mitin, B.S., and Tumanov, A.V. The kinetics of wetting of carbide and titanium carbonitride by melts of nickel intermetallides, Zh. Fiz. Khim., 1980, vol. 54, no. 6, pp. 14–34.
Panov, V.S. and Tumanov, A.V., Physical and mechanical properties of hard TA-20 alloy, Tsvetn. Met., 1982, no. 10, pp. 11–13.
Panov, V.S., Tumanov, A.V., and Kots, Yu.F., Wetting of carbides of Ti–C–W system by Ni3Al melt, Izv. VUZov, Poroshk. Metall. Funkts. Pokrytiya, 1986, no. 5, pp. 37–40.
Panov, V.S., Tumanov, A.V., and Kots, Yu.F., The interaction of titanium carbide and carbonitride with nickelides, Sov. Powder Metall. Met. Ceram., 1986, vol. 25, no. 10, pp. 860–862.
Panov, V.S., Kots, Yu.F., and Filimonova, A.A., Interaction between phases in the WC-Ni3Al system, Sov. Powder Metall. Met. Ceram., 1990, vol. 29, no. 7, pp. 564–567.
Panov, V.S., Kots, Yu.F., and Filimonova, A.A., The structure of the composite material of the WC–Ni3Al system at liquid-phase sintering, Tsvetn. Met., 1993, no. 4, pp. 55–57.
Panov, V.S. and Sekridova, O.B., Deposition of silicon nitride coatings, Sov. Powder Metall. Met. Ceram., 1984, vol. 23, no. 4, pp. 293–296.
Panov, V.S., Sekridova, O.B., and Bondarchuk, V.I., Gas-phase deposition of silicon nitride on hard alloys, in Effektivnost’ vnedreniya progressivnykh tekhnologii (Efficiency of Implementation of Advanced Technologies), Kuibyshev: KAN, 1984, pp. 27–29.
Panov, V.S. and Serdyuchenko, K.Yu., The influence of various types of plasticizers on the properties and structure of hard alloys, IX Mezhdunarodnaya konferentsiya “Porodorazrushayushchii i metalloobrabatyvayushchii instrument” (IX Int. Conf. “Mineral Destructive and Metalworking Tools”), Kyiv: Inst. Sverkhtverd. Mater. im. V.N. Bakulya, Nats. Akad. Nauk Ukr., 2006, no. 9, pp. 318–324.
Levashov, E.A., Rogachev, A.S., and Kurbatkina, V.V., Perspektivnye materialy i tekhnologii samorasprostranyayushchegosya temperaturnogo sinteza (Prospective Materials and Technologies of Self-Propagating High-Temperature Synthesis), Moscow: Mosk. Inst. Stali Splavov, 2011.
Kiryukhantsev-Korneev, F.V., Development of hard wear-resistant nanostructured coatings in the Ti–Si–N, Ti–B–N, Cr–B–N, Ti–Cr–B–N systems, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow: Natl. Univ. Sci. Technol., MISIS, 2004.
Pogozhev, Yu.S., Potanin, A.Yu., Levashov, E.A., Kochetov, N.A., Kovalev, D.Yu., and Rogachev, A.S., SHS of TiC–TiNi composites: effect of initial temperature and nanosized refractory additives, Int. J. Self-Propag. High-Temp. Synth., 2012, vol. 21, no. 4, pp. 202–211.
Pogozhev, Yu.S., Levashov, E.A., Kudryashov, A.E., Zamulaeva, E.I., Novikov, A.V., and Potanin, A.Yu., Composite SHS materials based on titanium carbide and nikelide doped with a refractory component, Russ. J. Non-Ferrous Met., 2014, vol. 55, no. 1, pp. 83–91.
Loginov, P., Mishnaevsky, L., Jr., Levashov, E., and Petrzhik, M., Diamond and cBN hybrid and nanomodified cutting tools with enhanced performances: development, testing and modeling, Mater. Des., 2015, vol. 88, pp. 310–319.
Froschhamer, L. and Fulrath, R.M., Direct observation of liquid-phase sintering in the system tungsten carbidecobalt, J. Mater. Sci., 1976, vol. 11, pp. 142–149.
Panov, V.S., Shumenko, V.N., and Klimenko, A.D., “Wet” pressing of T5K10 hard alloy, XIX Mezhdunarodnaya konferentsiya “Porodorazrushayushchii i metalloobrabatyvayushchii instrument” (IX Int. Conf. “Mineral Destructive and Metalworking Tools”), Kyiv: Inst. Sverkhtverd. Mater. im. V.N. Bakulya, Nats. Akad. Nauk Ukr., 2016, no. 19, pp. 396–402.
Panov, V.S. and Shumenko, V.N., Tekhnologiya i svoistva spechennykh tverdykh splavov (Technology and Properties of Sintered Solid Alloys), Moscow: Mosk. Inst. Stali Splavov, 2013.
Andrievskii, R.A. and Ragulya, A.V., Nanostrukturnye materialy (Nanomaterials), Moscow: Akademiya, 2005.
Fal’kovskii, V.A., Innovatsii v tekhnologii tverdykh splavov: nano-i ul’tradispersnye struktury (Innovations in Technology of Solid Alloys: Nano-and Ultradispersed Structures), Moscow: Mosk. Gos. Univ. Tonkikh Khim. Tekhnol., 2008.
Narva, V.K., Eremeeva, Zh.V., Sharipzyanova, G.Kh., Ter-Vagonyants, Yu.S., and Apostolova, E.V., Effect of nanosized modifiers on the structure and properties of powdered 50KhNM steel, Materialovedenie, 2017, no. 4, pp. 22–27.
Kiryukhantsev-Korneev, F.V., Levashov, E.A., and Shtanskii, D.V., Nanostructured Ti–Cr–B–N coatings for carbide cutting tools, Izv. VUZov, Poroshk. Metall. Funkts. Pokrytiya, 2010, no. 2, pp. 39–46.
Tsvetkov, Yu.V., Nikolaev, A.V., and Samokhin, A.V., Plasma processes in metallurgy and technologies of inorganic materials, Avtom. Svarka, 2013, nos. 10–11, pp. 112–118.
Tsvetkov, Yu.V., Nikolaev, A.V., and Panfilov, S.A., Nizkotemperaturnaya plazma: Plazmennaya metallurgiya (Low-Temperature Plasma: Plasma Metallurgy), Novosibirsk: Nauka, 1992, pp. 133–137.
Kalamazov, R.U., Tsvetkov, Yu.V., and Kal’kov, A.A., Vysokodispersnye prorshki vol’frama i molibdena (Superfine Powders of Tungsten and Molybdenum), Moscow: Metallurgiya, 1988, pp. 57–62.
Blagoveshchenskii, Yu.V., Isaeva, N.V., and Mel’nik, Yu.I., Preparation of nanopowders of carbides and hard alloy mixtures using low-temperature plasma, Izv. VUZov, Poroshk. Metall. Funkts. Pokrytiya, 2013, no. 3, pp. 7–14.
Blagoveshchenskiy, Yu.V., Isayeva, N.V., and Blagoveshchenskaya, N.V., Methods of compacting nanostructured tungsten–cobalt alloys from nanopowders obtained by plasma chemical synthesis, Inorg. Mater.: Appl. Res., 2015, vol. 6, no. 5, pp. 415–426.
Chuvildeev, V.N., Moskvicheva, A.V., and Lopatin, Y.G., Sintering of WC and WC–Co nanopowders with different inhibitors additions by SPS method, Proc. 17th Plansee Seminar—Int. Conf. on High Performance P/M Materials, Reutte, 2009, vol. 2, no. 53, pp. 623–627.
Konyashin, I., The formation of wear-resistant layers, including a stress-relaxing interlayer, during a chromium surface treatment of TiC or TiCN based cermets, Int. J. Refract. Met. Hard Mater., 1997, vol. 15, pp. 187–195.
Konyashin, I., Senchihin, V., Anikeev, A., and Glushkov, V., Development, production and application of novel grades of coated hard metals in Russia, Int. J. Refract. Met. Hard Mater., 1996, vol. 14, pp. 41–48.
Konyashin, I.Yu., Healing of surface defects in hard materials by thin coatings, J. Vac. Sci. Technol., A, 1996, vol. 2, pp. 447–452.
Konyashin, I.Yu. and Guseva, M.B., Thin films comparable with WC-Co cemented carbides as underlayers for hard and superhard coatings: the state of the art, Diamond Relat. Mater., 1996, vol. 5, pp. 575–579.
Guseva, M.B., Babaev, V.G., Khvostov, V.V., et al., High quality diamond films on WC–Co surfaces, Diamond Relat. Mater., 1997, vol. 6, pp. 89–94.
Zaitsev, A.A., Vershinnikov, V.I., and Konyashin, I., High-quality cemented carbides on the basis of nearnano and coarse-grain WC powders obtained by selfpropagating high-temperature synthesis (SHS), Int. J. Self-Propag. High-Temp. Synth., 2015, vol. 22, pp. 152–160.
Zaitsev, A.A., Vershinnikov, V.I., Konyashin, I., et al., Cemented carbides from WC powders obtained by the SHS method, Mater. Lett., 2015, vol. 158, pp. 329–332.
Zaytsev, A.A., Borovinskaya, I.P., Vershinnikov, V.I., Konyashin, I., Patsera, E.I., Levashov, E.A., and Ries, B., Near-nano and coarse-grain WC powders obtained by the self-propagating high-temperature synthesis and cemented carbides on their basis. Part I: Structure, composition and properties of WC powders, Int. J. Refract. Met. Hard Mater., 2015, vol. 50, pp. 146–151.
Gnatenko, I.A., Evaluation of the state of carbide skeleton of tungsten-cobalt hard alloys, Cand. Sci. (Eng.) Dissertation, Kyiv: Bakul Inst. Superhard Mater., 2017.
Bondarenko, V.P. and Gnatenko, I.A., Control of the carbide skeleton in sintered hard the WC-Co alloys, XIV Mezhdunarodnaya konferentsiya “Porodorazrushayushchii i metalloobrabatyvayushchii instrument” (IX Int. Conf. “Mineral Destructive and Metalworking Tools”), Kyiv: Inst. Sverkhtverd. Mater. im. V.N. Bakulya, Nats. Akad. Nauk Ukr., 2011, no. 14. pp. 423–437.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.S. Panov, 2018, published in Materialovedenie, 2018, No. 1, pp. 9–14.
Rights and permissions
About this article
Cite this article
Panov, V.S. Occurrence and Ways of Development of Manufacture of Domestic Hard Alloy Products. Inorg. Mater. Appl. Res. 9, 693–698 (2018). https://doi.org/10.1134/S2075113318040263
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113318040263