Abstract
Aluminum-matrix composite materials reinforced with carbon nanostructures were prepared by hot pressing of the powders produced by mechanical activation of aluminum and a carbon nanostructure. C60 fullerenes, multiwalled carbon nanotubes, onion-like carbon (OLC), and flake graphite were used as the reinforcing phase. The structures and the mechanical and tribological properties of the composite materials are investigated. It is shown that introduction of carbon nanostructures into the Al matrix is an effective way to improve the physicomechanical and tribological properties of Al-matrix composite materials.
Similar content being viewed by others
References
Nichiporchik, S.N., Korzhentsevskii, M.I., Kalachev, V.F., et al., Detali mashin v primerakh i zadachakh (Machine Details in Examples and Tasks), Minsk: Vysh. Shkola, 1981.
Chernyshova, T.A., Kobeleva, L.I., and Bolotova, L.K., Discontinuously reinforced composite materials with aluminum alloy matrices and their tribological properties, Russ. Metall. (Metally), 2001, No. 6, pp. 633–646.
Lopez, V.H., Scoles, A., and Kennedy, A.R., The thermal stability of TiC particles in an Al-7 wt % Si alloy, Mater. Sci. Eng. A, 2003, vol. 356, pp. 316–325.
Chernyshova, T.A., Kobeleva, L.I., and Lemesheva, T.V., Dispersion filled composite materials on antifriction silumine base for sliding friction, Perspekt. Mater., 2004, No. 3, pp. 69–75.
Evdokimov, I.A., Pivovarov, G.I., Blank, V.D., Aksenekov, V.V., and Kirichenko, A.N., Aluminumbased metal-carbon composite material, Izv. Vyssh. Ucheb. Zav., Ser. Khim. Khim. Tekhnol., 2011, vol. 54, no. 7, pp. 58–62.
Hurang H., Landon O., and Ayo, A., Characterizing and modeling of mechanical properties of nanocomposites. Review and evaluation, J. Min. Mater. Char. Eng., 2010, vol. 9, pp. 275–319.
Esawia, A.M.K., Morsib, K., Sayeda, A., Tahera, M., and Lankab, S., The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT reinforced aluminum composites. Composites A, Appl. Sci. Manuf., 2011, vol. 42, pp. 234–243.
Chunfeng, D., XueXi, Z., Dezun, W., Qiang, L., and Aibin, L., Preparation and characterization of carbon nanotubes/aluminum matrix composites, Mater. Lett., 2007, vol. 61, pp. 1725–1728.
Choia, H.J., Leeb, S.M., and Baea, D.H., Wear characteristic of aluminum-based composites containing multi-walled carbon nanotubes, Wear, 2010, vol. 270, pp. 12–18.
Kleiner, S., Bertocco, F., Khalid, F.A., and Beffort, O., Decomposition of process control agent during mechanical milling and its influence on displacement reactions in the Al-TiO2 system, Mater. Chem. Phys., 2005, vol. 89, pp. 362–366.
Saberi, Y., Zebarjad, S.M., and Akbari, G.H., On role of stearic acid on morphology of Al-SiC composite powders produced by mechanical alloying method, Powder Metallurgy, 2009, vol. 52, pp. 61–64.
Zhang, Y.F., Lu, L., and Yap, S.M., Prediction of the amount of PCA for mechanical milling, J. Mater. Proc. Technol., 1999, vol. 89–90, pp. 260–265.
Chichinadze, A.V., Berliner, E.M., Braun, E.D., et al., Trenie, iznos i smazka (tribologiya i tribotekhnika) (Friction, Wear and Lubrication (Tribology and Tribotechnics), Moscow: Mashinostroenie, 2003.
Zhang, Z.F., Zhang, L.C., and Mai, Y.-W., Modeling friction and wear of scratching ceramic particle reinforced metal composites, Wear, 1994, vol. 176, pp. 231–237.
Wang, A.G. and Rack, H.J., Abrasive wear of silicon carbide particulate- and whisker-reinforced 7091 aluminum matrix composites, Wear, 1991, vol.146, pp. 337–348.
Narayan, M., Surappa, M.K., and Pramila, B.N., Dry sliding wear of Al alloy 2024-Al2O3 particle metal matrix composites, Wear, 1995, vol. 181–183, pp. 563–570.
Zhang, J. and Alpas, A.T., Transition between mild and severe wear in aluminum alloys, Acta Mater., 1997, vol. 45, pp. 513–528.
Deuis, R.L., Subramanian, C., and Yellup, J.M., Dry sliding wear of aluminum composites. A review, Compos. Sci. Technol., 1997, vol. 57, pp. 415–435.
Riahi, A.R. and Alpas, A.T., The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites, Wear, 2001, vol. 251, pp. 1396–1407.
Sato, H., Murase, T., Fujii, T., Onaka, S., Watanabe, Y., and Kato, M., Formation of wear-induced layer with nanocrystalline structure in Al-Al3Ti functionally graded material, Acta Mater., 2008, vol. 56, pp. 4549–4558.
Evdokimov, I.A., Blank, V.D., Pivovarov, G.I., Vaganov, V.E., Reshetnyak, V.V., Perfilov, S.A., Kirichenko, A.N., Aksenenkov, V.V., Bagramov, R.Kh., and Tat’yanin, E.V., Study of physical-chemical properties of nanostructured composite materials of aluminum-nanocarbon system, Tr. VIII mezhdunar. konf. “Uglerod: fundamental’nye problemy nauki, materialovedenie, tekhnologiya” (Proc. 8th Int. Conf. “Carbon: Fundamental Problems of Science, Material Science, Technology”), Troitsk, Russia, 2012.
Sheng-ming, Z., Xiao-bin, Z., Zhi-peng, D., Chunyan, M., Guo-liang, X., and Wen-ming, Z., Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique, Composite A, 2007, vol. 38, pp. 301–306.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.A. Evdokimov, T.A. Chernyshova, G.I. Pivovarov, P.A. Bykov, L.A. Ivanov, V.E. Vaganov, 2013, published in Fizika i Khimiya Obrabotki Materialov, 2013, No. 5, pp. 58–65.
Rights and permissions
About this article
Cite this article
Evdokimov, I.A., Chernyshova, T.A., Pivovarov, G.I. et al. Tribological behavior of aluminum-matrix composites reinforced with carbon nanostructures. Inorg. Mater. Appl. Res. 5, 255–262 (2014). https://doi.org/10.1134/S2075113314030071
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113314030071