Abstract
An approach aimed at forming complex criteria intended to assess the quality of RR-type MEMS gyro designs, taking into account both the scale factor and overload capacity, is proposed. Using complex criteria based on the qualimetry principles makes it possible to estimate a complex of properties that are characterized by diverse and mutually contradictory relations between the gyro parameters and the design parameters of gyro suspensions. These complex criteria provide for objective comparison of different gyro designs and their parametric optimization.
Similar content being viewed by others
References
Evstifeev, M.I., The Main Stages of the Development of MEMS Gyros in Russia, Izv. Vuzov, Priborostroenie, 2011, vol. 54, no. 6, pp. 75–80.
Xie, H. and Fedder, G.K., Integrated Microelectrome-chanical Gyroscopes, Journal of Aerospace Engineering, 2003, April, pp. 65–75.
Savenko, N., Accelerometers and Gyroscopes for Mobile Devices, Sovremennaya elektronika, 2006, no. 6, pp. 18–21.
Sysoeva, S., Key Market Segments of MEMS Components. Inertial Systems — from Low-End to High-End Segments, Komponenty i tekhnologii, 2010, no. 5, pp. 22–30.
Tuzov, A., Sensors for measuring motion parameters based on MEMS technology. Part 2. High precision inertial sensors, Elektronika, 2011, no. 1, pp. 2–5.
Evstifeev, M.I., Problems of Structural analysis and Designing of MEMS Gyroscopes, Giroskopiya i Navigatsiya, 2004, no. 1, pp. 27–39.
Weinberg, H., Gyro Mechanical Performance: The Most Important Parameter, Technical Article MS-2158. Analog Devices, Inc., September 2011, pp. 1–5.
Geen, J., Progress in Integrated Gyroscopes, IEEE A&E Systems Magazine, 2004, November, pp. 12–17.
Evstifeev, M.I., Current Status and Prospects for the Development of MEMS Gyroscopes, Materialy II konferentsii molodykh uchenykh “Navigatsiya i upravlenie dvizheniem”, St. Peterburg, 2000, pp. 54–71.
Evstifeev, M.I., Problems of Designing and the Experience in the Development of MEMS Gyroscopes, Mekhatronika, avtomatizatsiya, upravlenie, 2009, no. 6, pp. 70–76.
Chaumet, B. et al., A New Silicon Tuning Fork Gyroscope for Aerospace Applications, Proc. Symp. Gyro Technology, Karlsruhe, Germany, 2009, pp.1.1–1.13.
Geiger, W. et al., Test Results of the Micromechanical Coriolis Rate Sensor μCORS II, Symp. Gyro Technology, 2004, Stuttgart, Germany, pp.1.0–1.18.
Blixhavn, B. et al., SAR500 — A Novel High-Precision Gyroscope, Proc. Symp. Gyro Technology, Karlsruhe, Germany, 2010, pp.5.1–5.13.
Apostolyuk, V.A. and Zbrutsky, A.V., Dynamics of the Sensitive Element of a MEMS Gyroscope with an Extra Frame, Giroskopiya i Navigatsiya, 1998, no. 3, pp. 13–23.
Dzhashitov, V.E. and Pankratov, V.M., Selecting Parameters of an Elastic Suspension for a Planar MEMS Gyroscope Based on Determination of Frequencies of its Own Oscillations, Giroskopiya i Navigatsiya, 2005, no. 4, pp. 42–56.
Evstifeev, M.I., Rozentsvein, D.V., and Chelpanov, I.B., Analyzing the Strength of Elastic Suspension of MEMS Gyroscopes, Giroskopiya i Navigatsiya, 2009, no. 3, pp. 22–34.
Evstifeev, M.I., Elastic Suspensions of Proof Masses in Precise Instrument Engineering, Giroskopiya i Navigatsiya, 2007, no. 2, pp. 63–76.
Evstifeev, M.I. and Rozentsvein, D.V., Analysis of Contact Interactions in MEMS gyroscopes, Nauchno-tehnicheskii vestnik, SPbGU, ITMO, 2010, no. 4, pp. 46–50.
Azgal’dov, G.G. and Raikhman, E.P., O kvalimetrii (About Qualimetry), Moscow: Izdatel’stvo standartov, 1972.
Fomin, V.N., Kvalimetriya. Upravlenie kachestvom. Sertifikatsiya: Kurs lektsii (Qualimetry. Quality control. Certification: A course of lectures), Moscow: EKMOS, 2000.
Author information
Authors and Affiliations
Additional information
Published in Russian in Giroskopiya i Navigatsiya, 2012, No. 1, pp. 122–131.
Rights and permissions
About this article
Cite this article
Evstifeev, M.I., Chelpanov, I.B. Quality criteria and optimization of RR-Type MEMS gyro designs. Gyroscopy Navig. 3, 168–174 (2012). https://doi.org/10.1134/S2075108712030054
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075108712030054