Abstract
Adhesion strength τ of joints of a fiber–epoxy matrix was studied upon multiple repetition of the curing process. It has been shown that recuring weakens the interface. After a 12-fold cure, the values of τ are reduced by 30%. The possible causes of the observed changes are considered. The fall of τ should be considered when designing products made of GFRP.
Similar content being viewed by others
REFERENCES
D. V. Onuchin, I. S. Sirotin, G. A. Pavlova, S. N. Filatov, V. V. Kireev, M. L. Kerber, and I. Yu. Gorbunova, “Features of curing of a diane epoxy oligomer modified with epoxyphosphazene,” Polym. Sci., Ser. B 60 (2), 182–187 (2018).
T. V. Brantseva, V. I. Solodilov, S. V. Antonov, I. Y. Gorbunova, R. A. Korohin, A. V. Shapagin, and N. M. Smirnova, “Epoxy modification with poly(vinyl acetate) and poly(vinyl butyral). I. Structure, thermal, and mechanical characteristics,” J. Appl. Polym. Sci. 133, 44081 (2016). https://doi.org/10.1002/app.44081
S. V. Kondrashov, P. S. Marakhovskii, I. A. Maiorova, A. A. Egorov, I. A. Mansurova, and G. Yu. Yurkov, “Influence of the curing mode on the formation of the structure of epoxy composites in the presence of carbon nanotubes,” Perspekt. Mater., No. 6, 56–63 (2014).
Yu. A. Gorbatkina, I. Yu. Gorbunova, and M. L. Kerber, “Change of adhesion properties of epoxy oligomer modified by polyarylene ether ketone in the process of curing,” Polym. Sci., Ser. D 4 (2), 95–101 (2010).
Yu. A. Gorbatkina, Adhesive Strength of Fibre-Polymer Systems (Ellis Horwood, New York–London, 1992).
I. Yu. Gorbunova, M. V. Shustov, and M. L. Kerber, “The effect of thermoplastic modifiers on the properties and curing process of epoxy polymers,” Inzh.-Fiz. Zh. 76 (3), 84–87 (2003).
M. A. Khaskov, D. A. Mel’nikov, and E. V. Kotova, “Selection of temperature-time modes of curing of epoxy binders taking into account the scale factor,” Klei, Germetiki, Tekhnol., No. 10, 24–32 (2017).
M. A. Khaskov, “Building diagrams of isothermal transformation of thermosetting matrices based on various kinetic models,” Klei, Germetiki, Tekhnol., No. 5, 20–27 (2017).
ACKNOWLEDGMENTS
The work was performed in the framework of the topic no. 45.11 of a state task of the Federal Agency for Scientific Organizations of Russia, no. of FASO topic 0082-2014-0009, no. of state registration AAAA-A17-117040610309-0.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Sh. Galyaltdinov
Rights and permissions
About this article
Cite this article
Gorbatkina, Y.A., Ivanova-Mumzhieva, V.G. & Solodilov, V.I. The Influence of Multiple Curing on the Strength of a Fiber–Matrix Interface. Polym. Sci. Ser. D 12, 133–136 (2019). https://doi.org/10.1134/S1995421219020047
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421219020047