Abstract
This paper considers features of processing of machinery parts for the workability during the transition to new construction materials (in particular polymer composite materials). It describes the qualitative and quantitative methods for assessing the workability of designs.
Similar content being viewed by others
References
N. I. Baurova, V. A. Zorin, and V. M. Prikhod’ko, “Technological heredity and identification of technological processes,” Polym. Sci., Ser D 8 (3), 219–222 (2015).
V. A. Nelyub, “Technologies of production of components of electric transmission line supports from epoxy binders by the winding method,” Polym. Sci., Ser. D 6 (1), 44–47 (2013).
GOST (State Standard) 14.205–83: Manufacturability of Product Design. Terms and Definitions (1983).
V. A. Zorin and N. I. Baurova, “Modeling of repair materials properties under prolonged exposure to operational factors,” Mekh. Stroit., No. 1, 15–17 (2012).
V. V. Klyuev and N. R. Kuzelev, “Technologies and means of nondestructive testing and technical diagnostics of Research Institute of Introscopy MSIA Spectrum,” Remont, Vosstanov., Mod., No. 1, 3–6 (2014).
G. V. Malysheva, “Problems of reliability of the machines with glue joints,” Klei, Germetiki, Tekhnol., No. 8, 28–34 (2005).
G. V. Malysheva, “Predicting the life of adhesive joints,” Klei, Germetiki, Tekhnol., No. 8, 31–34 (2013).
N. I. Baurova, “Deflected mode simulation of adhesive jonts,” Polym. Sci., Ser. D 2 (1), 54–57 (2009).
G. V. Malysheva and N. V. Bodrykh, “Hot-melt adhesives,” Polym. Sci., Ser. D 4 (4), 301–303 (2011).
N. V. Lapina, “Analysis of standards used in evaluating manufacturability,” Vse Mater., Entsikl. Sprav., No. 10, 28–31 (2015).
GOST (State Standard) 14.201–83: Ensuring the Design Manufacturability. General Requirements (1983).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.V. Lapina, N.I. Baurova, 2016, published in Vse Materialy. Entsiklopedicheskii Spravochnik, 2016, No. 1, pp. 11–15.
Rights and permissions
About this article
Cite this article
Lapina, N.V., Baurova, N.I. Features of processing machinery parts for workability when transiting to new construction materials. Polym. Sci. Ser. D 9, 326–330 (2016). https://doi.org/10.1134/S1995421216030138
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421216030138