Abstract
This paper presents a composition developed for use both as a film adhesive with a working temperature up to 150°C and as a binder for production of fiberglass with a working temperature up to 120°C. The composition is autoextinguishing and contains bromated epoxy resins. It is shown that the strength property indices of the fiberglass bound with the created composition are up to those for modern structural materials.
Similar content being viewed by others
References
L. I. Anikhovskaya, D. V. Batizat, E. I. Baturina, E. V. Leshchun, and A. M. Sakharov, “An uninflammable film adhesive and an adhesive prepreg based on it,” Polym. Sci., Ser. D 7 (2), 81–83 (2014).
TU 1-596-389–96. Adhesive films VK-36.
TU 1-595-14-863–2005. Adhesive films VK-46.
TU 1-595-14-954–2007. Adhesive prepregs KMKS- 2m.120.T10.37 (with changes 1–7).
GOST (State Standard) 25.601–80: Calculations and Tests for Strength. Test Methods for Composite Materials with Polymer Matrix (Composites). Method of Testing of Flat Samples for Tensile Strength under Normal, Low and High Temperatures (1980).
S. L. Barbot’ko, O. S. Vol’nyi, O. A. Kirienko, and E. N. Shurkova, “Features of testing of aircraft materials for flammability. Part 1: Test for flammability. Influence of sample thickness on the recorded characteristics,” Pozharovzryvobezopasnost’ 24 (1), 40–48 (2015).
S. L. Barbot’ko, O. S. Vol’nyi, O. A. Kirienko, and E. N. Shurkova, “Features of testing of aircraft materials for flammability. Part 3: Tests for smoke generation. Influence of thickness of monolithic sample made of polymeric composite material,” Pozharovzryvobezopasnost’ 24 (4), 7–22 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.V. Batizat, L.I. Anikhovskaya, S.L. Barbot’ko, A.M. Sakharov, A.A. Yarosh, 2016, published in Klei. Germetiki. Tekhnologii, 2016, No. 2, pp. 9–14.
Rights and permissions
About this article
Cite this article
Batizat, D.V., Anikhovskaya, L.I., Barbot’ko, S.L. et al. Noncombustible adhesive compositions based on brominated epoxide resins for production of structural film adhesives and adhesive prepregs. Polym. Sci. Ser. D 9, 298–302 (2016). https://doi.org/10.1134/S1995421216030059
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421216030059