Abstract
This paper presents a study of three-dimensional micro- and nanosctucture of polyurethane dual scale biocompatible scaffold made by three-dimensional printing and electrospinning. The three-dimensional structure of the scaffold was analyzed by scanning probe nanotomography with use of an experimental setup combining an ultramicrotome and a scanning probe microscope. We performed a quantitative analysis of microporosity, nanoroughness, and three-dimensional morphology parameters of the scaffold. The electrospun scaffold consists of a network of microfibers with diameter ranging from 1.7 to 6.0 μm. The measured mean microfiber diameter is 3.54 ± 1.23 μm. The volume porosity of the electrospun scaffold is 72.5%, while mean surface area to volume ration is 0.28 μm–1 and mean nanoroughness of microfiber surface is 22.1 ± 3.0 nm. The quantitative characteristics of the micro- and nanostructure of elecrospun polyurethane matrices secure the high efficacy of its usage for increasing the biocompatibility of dual-scale hybrid bioengineered scaffolds for regenerative medicine tasks. The use of scanning probe nanotomography for analyzing threedimensional morphology characteristics and the topology of electrospun microfiber systems enables us to improve the efficiency of development of new bioengineered products.
Similar content being viewed by others
References
D. Li and Y. Xia, “Electrospinning of nanofibers: reinventing the wheel?,” Adv. Mater. 16, 1151 (2004).
W. E. Teo and S. Ramakrishna, “A review on electrospinning design and nanofibre assemblies,” Nanotechnology 17 (14), 89 (2006).
D. I. Braghirolli, D. Steffens, and P. Pranke, “Electrospinning for regenerative medicine: a review of the main topics,” Drug. Discov. Today 19, 743 (2014).
D. Kai, S. S. Liow, and X. J. Loh, “Biodegradable polymers for electrospinning: towards biomedical applications,” Mater. Sci. Eng. C: Mater. Biol. Appl. 45, 659 (2014).
L. Jin, T. Wang, M. L. Zhu, M. K. Leach, Y. I. Naim, J. M. Corey, Z. Q. Feng, and Q. Jiang, “Electrospun fibers and tissue engineering,” J. Biomed. Nanotechnol. 8 (1), 1 (2012).
Q. P. Pham, U. Sharma, and A. G. Mikos, “Electrospinning of polymeric nanofibers for tissue engineering applications: a review,” Tissue Eng. 12, 1197 (2006).
Z. Ma, M. Kotaki, R. Inai, and S. Ramakrishna, “Potential of nanofiber matrix as tissue-engineering scaffolds,” Tissue Eng. 11, 101 (2005).
G. C. Ingavle and J. K. Leach, “Advancements in electrospinning of polymeric nanofibrous scaffolds for tissue engineering,” Tissue Eng. Part B: Rev. 20, 277 (2014).
R. A. Rezende, F. D. S. Azevedo, F. D. Pereira, V. Kasyanov, X. Wen, J. V. L. de Silva, and V. V. Mironov, “Nanotechnological strategies for biofabrication of human organs,” J. Nanotechnol. 2012, 149264 (2012).
S. A. Guelcher, “Biodegradable polyurethanes: synthesis and applications in regenerative medicine,” Tissue Eng. Part B: Rev. 14, 3 (2008).
A. Baji, Y. W. Mai, S. C. Wong, M. Abtahi, and P. Chen, “Electrospinning of polymer nanofibers: effects on oriented morphology, structures and tensile properties,” Compos. Sci. Technol. 70, 703 (2010).
S. Khorshidi, A. Solouk, H. Mirzadeh, S. Mazinani, J. M. Lagaron, S. Sharifi, and S. Ramakrishna, “A review of key challenges of electrospun scaffolds for tissue-engineering applications,” J. Tissue Eng. Regen. Med. (2015). doi:. doi 10.1002/term.1978
A. E. Efimov, A. G. Tonevitsky, M. Dittrich, and N. B. Matsko, “Atomic force microscope (AFM) combined with the ultramicrotome: a novel device for the serial section tomography and AFM/TEM complementary structural analysis of biological and polymer samples,” J. Microsc. 226, 207 (2007).
A. E. Efimov, H. Gnaegi, R. Schaller, W. Grogger, F. Hofer, and N. B. Matsko, “Analysis of native structure of soft materials by cryo scanning probe tomography,” Soft Matter 8, 9756 (2012).
A. Alekseev, A. Efimov, K. Lu, and J. Loos, “Threedimensional electrical property reconstruction of conductive nanocomposites with nanometer resolution,” Adv. Mater. 21, 4915 (2009).
K. E. Mochalov, A. E. Efimov, A. Bobrovsky, I. I. Agapov, A. A. Chistyakov, V. A. Oleinikov, A. Sukhanova, and I. Nabiev, “Combined scanning probe nanotomography and optical microspectroscopy: a correlative technique for 3D characterization of nanomaterials,” ACS Nano 7, 8953 (2013).
A. E. Efimov, M. M. Moisenovich, A. G. Kuznetsov, L. A. Safonova, M. M. Bobrova, and I. I. Agapov, “Investigation of micro- and nanostructure of biocompatible scaffolds from regenerated fibroin of Bombix mori by scanning probe nanotomography,” Nanotechnol. Russ. 9, 688 (2014).
A. E. Efimov, M. M. Moisenovich, V. G. Bogush, and I. I. Agapov, “3D nanostructural analysis of silk fibroin and recombinant spidroin 1 scaffolds by scanning probe nanotomography,” RSC Adv. 4, 60943 (2014).
Y. W. Fan, F. Z. Cui, S. P. Hou, Q. Y. Xu, L. N. Chen, and I. S. Lee, “Culture of neural cells on silicon wafers with nanoscale surface topography,” J. Neurosci. Methods 17, 120 (2002).
T. J. Webster, R. W. Siegel, and R. Bizios, “Osteoblast adhesion on nanophase ceramics,” Biomaterials 20, 1221 (1999).
S. D. McCullen, D. R. Stevens, W. A. Roberts, L. I. Clarke, S. H. Bernacki, R. E. Gorga, and E. G. Loboa, “Characterization of electrospun nanocomposite scaffolds and biocompatibility with adiposederived human mesenchymal stem cells,” Int. J. Nanomed. 2, 253 (2007).
J. Nam, Y. Huang, S. Agarwal, and J. Lannutti, “Improved cellular infiltration in electrospun fiber via engineered porosity,” Tissue Eng. 13, 2249 (2007).
B. S. Kim and D. J. Mooney, “Development of biocompatible synthetic extracellular matrices for tissue engineering,” Trends Biotechnol. 16, 2240 (1998).
B. Dhandayuthapani, Y. Yoshida, T. Maekawa, and D. S. Kumar, “Polymeric scaffolds in tissue engineering application: a review,” Int. J. Polym. Sci. 2011, 290602 (2011).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.E. Efimov, O.I. Agapova, V.A. Parfenov, F.D.A.S. Pereira, E.A. Bulanova, V.A. Mironov, I.I. Agapov, 2015, published in Rossiiskie Nanotekhnologii, 2015, Vol. 10, Nos. 11–12.
The article was translated by the authors.
Rights and permissions
About this article
Cite this article
Efimov, A.E., Agapova, O.I., Parfenov, V.A. et al. Investigating the micro- and nanostructure of microfibrous biocompatible polyurethane scaffold by scanning probe nanotomography. Nanotechnol Russia 10, 925–929 (2015). https://doi.org/10.1134/S1995078015060038
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995078015060038