Abstract
Multidisciplinary conceptual approach to studying the friction in friction couples differing in the friction surfaces, their structure, structural organization in thin layers, lubricants, and loads in the contact zones using different methods for recording the sliding and rolling friction is presented. The possibility of controlling the boundary friction using deposited coatings and the orientation effect of these coatings on lubricating materials in friction couples was demonstrated. Application of diamond-like carbon coatings onto working surfaces of parts of heavy-duty friction units (engines, tooth gears, contacts between a metalworking tool and a part being machined, etc.) allows the content of additives in lubricating oils to be significantly reduced and thus the consumption of lubricating materials to be decreased, up to complete abandonment of the use of oils containing expensive or environmentally unfriendly additives.
Similar content being viewed by others
References
Miyoshi, K., Technology, 1999, vol. 9, pp. 381–394.
Buyanovsky, I., Levchenko, V., Bolshakov, A., and Samusenko, V., J. Machin. Manufact. Reliab., 2019, vol. 48, no. 1, pp. 73–78. https://doi.org/10.3103/S105261881901005
Levchenko, V.A. and Matveenko, V.N., J. Mater. Sci. Eng. A, 2014, vol. 3, no. 3, pp. 133–138. https://doi.org/10.4172/2169-0022.S1.014
Buyanovskii, I.A., Levchenko, V.A., Ignat’eva, Z.V., Matveenko, V.N., and Bol’shakov, A.N., Metody povysheniya dolgovechnosti mashin za schet modifitsirovaniya ikh poverkhnostei (Methods for Prolonging the Service Life of Machines by Modification of Their Surfaces), Moscow: Krasand, 2013 pp. 294–327.
Buyanovskii, I.A., Bartko, R.V., Levchenko, V.A., Bol’shakov, A.N., Samusenko, V.D., Zelenskaya, M.N., and Matveenko, V.N., J. Machin. Manufact. Reliab., 2018, vol. 47, no. 3, pp. 266–270. https://doi.org/10.3103/S1052618818030044
Erdemir, A. and Donnet, C., J. Phys. D: Appl. Phys., 2006, vol. 39, pp. 311–327. https://doi.org/10.1088/0022-3727/39/18/R01
Levchenko, V.A., Buyanovskii, I.A., and Drozdov, Yu.N., Sovremennaya tribologiya. Dostizheniya i perspektivy (Modern Tribology. Achievements and Prospects), Frolov, K.V., Ed., Moscow: LKI, 2008 pp. 287–292.
Semenov, A.P., Tren. Iznos, 2009, vol. 30, no. 1, pp. 83–102.
Ronkainen, H., Varjus, S., and Holmberg, K., Wear, 1998, vol. 222, pp. 120–128. https://doi.org/10.1016/S0043-1648(98)00314-7
Kalin, M. and Vizintin, J., Wear, 2005, vol. 259, pp. 1270–1280. https://doi.org/10.1016/j.wear.2005.02.028
Podgornik, B., Tribology of Diamond-Like Ffilms. Fundamentals and Applications, Donet, C. and Erdemir, A., Eds., New York: Springer, 2008, pp. 410–455. https://doi.org/10.1007/978-0-387-49891-1_16
Deryagin, B.V. and Spitsyn, B.V., in Rost kristallov (Crystal Growth), Yerevan: Erevanskii Gos. Univ., 1977, vol. 12, pp. 28–32.
Spitsyn, B.V., Bouilov, L.L., and Deryaguin, B.V., J. Crystal Growth, 1981, vol. 52, pp. 219–221.
Grill, A. and Patel, V., Diamond Relat. Mater., 1993, vol. 2, pp. 597–605. https://doi.org/10.1016/0925-9635(93)90190-D
Ferrari, A.C., Tribology of Diamond-Like Carbon Films. Fundamentals and Applications, Donet, C. and Erdemir, A., Eds., New York: Springer, 2006, pp. 25–82. https://doi.org/10.1007/978-0-387-49891-1_2
Fontaine, J., Donnet, C., and Erdemir, A., Abstracts of Papers, World Tribology Congr., Kyoto (Japan), Sept. 6–11, 2009, p. 407.
Donnet, C., Fontaine, J., Grill, A., and Le Mogne, T., Tribol. Lett., 2001, vol. 9, nos. 3–4, pp. 137–142. https://doi.org/10.1023/A:1018800719806
Erdemir, A. and Fryilmaz, O., Abstracts of Papers, World Tribology Congr., Kyoto (Japan), Sept. 6–11, 2009, p. 15, B1–121.
Bol’shakov, A.N., Buyanovskii, I.A., Levchenko, V.A., Ignatieva, Z.V., and Matveenko, V.N., J. Inorg. Mater., 2012, vol. 48, no. 15, pp. 1359–1363. https://doi.org/10.1134/S0020168512140051
Bol’shakov, A.N., Buyanovskii, I.A., Ignat’eva, Z.V., Levchenko, V.A., and Matveenko, V.N., Zavod. Lab. Diagnost. Mater., 2011, vol. 77, no. 11, pp. 27–31.
Drozdov, Yu.N., Buyanovskii, I.A., Levchenko, V.A., Bol’shakov, A.N., Sipatrov, A.G., Zelenskaya, M.N., Bartko, R.V, and Matveenko, V.N., J. Machin. Manufact. Reliab., 2014, vol. 43, no. 4, pp. 298–305. https://doi.org/10.3103/S1052618814040049
Levchenko, V.A., Buyanovskii, I.A., Ignat’eva, Z.V., Khrushchov, M.M., and Matveenko, V.N., Tren. Smazka Mash. Mekhan., 2013, no. 7, pp. 43–47.
Kalin, M., Velkavrh, I., Vizintin, J., and Ozbolt, L., Meccanica, 2008, vol. 43, no. 6, pp. 623–637. https://doi.org/10.1007/s11012-008-9149-z
Podgornik, B., Hren, D., Vizintin, J., Jacobson, S., Syavlid, N., and Hogmark, S., Wear, 2006, vol. 261, pp. 32–40. https://doi.org/10.1016/j.wear.2005.09.007
Podgornik, B., Hogmark, S., and Sandberg, O., Surf. Coat. Technol., 2004, vol. 184, pp. 338–348. https://doi.org/10.1016/j.surfcoat.2003.11.002
Podgornik, B., Vizintin, J., Jacobson, S., and Hogmark, S., Surf. Coat. Technol., 2004, vol. 177–178, pp. 558–565. https://doi.org/10.1016/S0257-8972(03)00927-7
Jonekura, D., Chittenden, R.J., and Dearley, P.A., Wear, 2005, vol. 259, pp. 779–788. https://doi.org/10.1016/j.wear.2004.12.008
Renondeau, H., Rapke, B.L., Pozedanchuk, M., and Parthasarathy, P., Proc. Inst. Mech. Eng. J. J. Eng. Tribol., 2009, vol. 223, no. 3, pp. 405–412. https://doi.org/10.1243/13506501JET548
Klaffke, D., Santer, E., Spaltmann, D., and Woydt, M., Wear, 2005, vol. 259, pp. 752–758. https://doi.org/10.1016/j.wear.2005.01.008
Zaslavskii, Yu.S., Tribologiya smazochnykh materialov (Lubricant Tribology), Moscow: Khimiya, 1991 pp. 221–238.
Parenago, O.P., Lozovoi, Yu.A., Zaimovskaya, T.A., and Kuzmina, G.N., Tribol. Int., 2000, vol. 33, pp. 689–695. https://doi.org/10.1016/S0301-679X(00)00101-8
Hatsuno, K. and Hosomi, Y., Jpn. Soc. Tribol. Tribol. online, 2008, vol. 3, no. 6, pp. 333–336. https://doi.org/10.2474/trol.3.333
Kano, M., Yashuda, Y., Ye, J., and Konishi, S., in Proc. WTC2005: World Tribology Congr. III, Washington, DC (USA), Sept. 12–16, 2005, WTC2005-63920. https://doi.org/10.1115/WTC2005-63920
Martin, J.M., De Barros Bouchet, M.I., Le Mogne, T., and Kano, M., in Proc. WTC2005: World Tribology Congr. III, Washington, DC (USA), Sept. 12–16, 2005, WTC2005-63953. https://doi.org/10.1115/WTC2005-63953
De Barros Bouchet, M.I., Matta, C., Le Mogne, T., and Martin, J.M., J. Phys: Conf. Ser., 2007, vol. 89, pp. 1–14. https://doi.org/10.1088/1742-6596/89/1/012003
De Barros Bouchet, M.I. and Martin, J.M., Tribology of Diamond-Like Films. Fundamentals and Applications, Donet, C. and Erdemir, A., Eds., New York: Springer, 2008, pp. 588–619. https://doi.org/10.1007/978-0-387-49891-1_23
Kano, M., Yashuda, Y., and Ye, J., Lubricat. Sci., 2004, vol. 17, no. 1, pp. 95–103. https://doi.org/10.1002/ls.3010170108
Topolovec-Miklozsic, K., in 3rd Vienna Int. Conf. Nanotechnology—Viennano’09, Vienna, March 19–20, 2009, pp. 41–45.
De Barros-Bouchet, M.I., Martin, J.M., Le Mogne, T., and Vacher, B., Tribol. Int., 2005, vol. 38, pp. 257–264. https://doi.org/10.1016/j.triboint.2004.08.009
Uetz, H., Khosrawi, M.A., and Fohl, J., Wear, 1984, vol. 100, pp. 301–313. https://doi.org/10.1016/0043-1648(84)90018-8
Haque, T., Morina, A., Neville, A., and Kapadia, R., Wear, 2009, vol. 266, pp. 147–157. https://doi.org/10.1016/j.wear.2008.06.011
Levchenko, V.A., Buyanovsky, I.A., Bolshakov, A.N., Zelensky, M.N., Ignatieva, Z.V., and Matveenko, V.N., J. Frict. Wear, 2013, vol. 34, no. 5, pp. 470–474. https://doi.org/10.3103/S1068366613050048
Matveenko, V.N., Levchenko, V.A., Buyanovskii, I.A., Bolshakov, A.N., and Zakharov, K.A., J. Mater. Sci. Eng. A, 2014, vol. 3, no. 3, pp. 183–185. https://doi.org/10.4172/2169-0022.S1.015
Buyanovskii, I.A., Bolshakov, A.N., Levchenko, V.A., and Matveenko, V.N., J. Frict. Wear, 2014, vol. 35, no. 2, pp. 129–132. https://doi.org/10.3103/S1068366614020032
Levchenko, V.A., Buyanovsky, I.A., Bolshakov, A.N., and Matveenko, V.N., J. Electr. Eng., 2014, vol. 2, no. 1, pp. 39–48.
Miyaki, S., Mitsuyoshi, K., Kurosaka, W., Saito, Y., Yasuda, Y., and Okamoto, Y., Jpn. Soc. Tribol. Tribol. online, 2008, vol. 3, no. 5, pp. 310–315. https://doi.org/10.2474/trol.3.310
Kalin, V., Vizantin, J., Barrega, J., Vercammenc, K., van Ackerc, K., and Arnsek, A., Tribol. Lett., 2004, vol. 17, pp. 679–688. https://doi.org/10.1007/s11249-004-8073-1
Zhao, F., Li, H., Ji, L., Wang, Y., Zhou, H., and Chen, J., Diamond Relat. Mater., 2010, vol. 19, no. 4, pp. 342–349. https://doi.org/10.1016/j.diamond.2010.01.008
Podgornik, B., Jacobson, S., and Hogmark, S., Surf. Coat. Technol., 2003, vol. 165, pp. 168–175. https://doi.org/10.1016/S0257-8972(02)00766-1
Podgornik, B., Hren, D., Vizintin, J., Jacobson, S., Stavlid, N., and Hogmark, S., Wear, 2006, vol. 261, no. 1, pp. 32–40. https://doi.org/10.1016/j.wear.2005.09.007
Buyanovskii, I.A., Levchenko, V.A., Sipatrov, A.G., Bol’shakov, A.N., Zelenskaya, M.N., Bartko, R.V., and Matveenko, V.N., Tren. Smazka Mash. Mekhan., 2014, no. 12, pp. 12–22.
Funding
The study was supported by the Russian Foundation for Basic Research (project no. 18-08-00591).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Russian Text © The Author(s), 2019, published in Zhurnal Prikladnoi Khimii, 2019, Vol. 92, No. 12, pp. 1499–1513.
Rights and permissions
About this article
Cite this article
Levchenko, V.A., Buyanovskii, I.A., Bol’shakov, A.N. et al. Green Tribology: Orientation Properties of Diamond-Like Carbon Coatings of Friction Units in Lubricating Media. Russ J Appl Chem 92, 1603–1615 (2019). https://doi.org/10.1134/S1070427219120012
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427219120012