Abstract
The MPF-NiMoS catalyst prepared in situ by decomposition of the thio salt [N(n-Bu)4]2[Ni(MoS4)2] in pores of an ordered mesoporous phenol-formaldehyde polymer was tested in hydroprocessing of vacuum gas oil in a batch reactor at 380–420°C and a pressure of 5.0 MPa for 5 h. The mean length of sulfide nanoparticles is 4.2 nm, and the mean number of layers is 2. The fraction of lighter products and the degree of desulfurization increase with temperature.
Similar content being viewed by others
References
Speight, J.G., The Refinery of the Future, Oxford: Elsevier, 2011, ch. 6, p. 181.
EN (European Standard) 590:2010: Automotive Fuels—Diesel—Requirements and Test Methods, 2010.
Toulhoat, H. and Raybaund, P., Catalysis by Transition Metal Sulphides: From Molecular Theory to Industrial Application, Technip, 2013.
Egia, B., Cambra, J.F., Arias, P.L., Güemez, M.B., Legarreta, J.A., Pawelec, B., and Fierro, J.L.G., Appl. Catal. A: General, 1998, vol. 169, pp. 37–53.
Cui, Q., Wang, S., Wei, Q., Mu, L., Yu, G., Zhang, T., and Zhou, Y., Fuel, 2019, vol. 237, pp. 597–605.
Zheng, X., Chang, J., and Fu, Y., Fuel, 2015, vol. 157, pp. 107–114.
Minja, R.J.A. and Ternan, M., Energy Fuels, 1991, vol. 5, pp. 117–122.
Gutiérrez, A., Arandes, J.M., Castaño, P., Olazar, M., and Bilbao, J., Fuel, 2012, vol. 94, pp. 504–515.
Dik, P.P., Klimov, O.V., Danilova, I.G., Leonova, K.A., Pereyma, VY., Budukva, S.V., Uvarkina, D.D., Kazakov, M.O., and Noskov, A.S., Catal. Today, 2016, vol. 271, pp. 154–162.
Gutiérrez, A., Arandes, J.M., Castaño, P., Olazar, M., and Bilbao, J., Energy Fuels, 2012, vol. 26, pp. 5897–5904.
Gutierrez, O.Y., Singh, S., Schachtl, E., Kim, J., Kondratieva, E., Hein, J., and Lercher, J.A., ACS Catal., 2014, vol. 4, pp. 1487–1499.
Breysse, M. and Afanasiev, P., Geantet, C., and Vrinat, M., Catal. Today, 2003, vol. 86, pp. 5–16.
Karakhanov, E., Boronoev, M., Ignatyeva, V., Maximov, A., Filippova, T., and Kardasheva, Y., J. Inorg. Organomet. Polym. Mater., 2016, vol. 26, pp. 1253–1258.
Karakhanov, E., Kardasheva, Y., Kulikov, L., Maximov, A., Zolotukhina, A., Vinnikova, M., and Ivanov, A., Catalysts, 2016, vol. 6, no. 8, article no. 122.
Boronoev, M.P., Vinnikova, M.A., Ignat’eva, V.I., Kulikov, L.A., Putilin, F.N., Maksimov, A.L., and Karakhanov, E.A., Petrol. Chem., 2017, vol. 57, pp. 855–858.
Karakhanov, E., Maximov, A., Kardasheva, Y., Vinnikova, M., and Kulikov, L., Catalysts, 2018, vol. 8, no. 9, article no. 397.
Karakhanov, E.A., Boronoev, M.P., Ignat’eva, V.I., Kardasheva, Yu.S., Filippova, T.Yu, and Maksimov, A.L., Petrol. Chem., 2017, vol. 57, pp. 673–677.
Crossland, C.J., Evans, I.R., and Evans, J.S.O., Dalton Trans., 2008, p. 15971601.
ASTM D2887/D2887-18: Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography: West Conshohocken, PA: ASTM, https://doi.org/www.astm.org (addressed Nov. 1, 2018).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Karakhanov, E.A., Boronoev, M.P., Dzhanaeva, E.Y. et al. Hydroprocessing of Vacuum Gas Oil on NiMo Sulfide Catalyst Supported on an Ordered Mesoporous Polymer. Russ J Appl Chem 92, 300–303 (2019). https://doi.org/10.1134/S1070427219020204
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427219020204