Abstract
A novel amino functionalized Fe3O4/multi-walled carbon nanotubes hybrid was synthesized by a facile and efficient one-pot solvothermal process. The 3-aminophenoxyphthalonitrile which was regarded as phthalonitrile monomer was introduced into the solvothermal process and promoted the phthalocyanine cyclization reaction, finally forming the amino functionalized hybrid. The structure, composition, and morphology were characterized by FTIR, XRD, XPS, SEM, and TEM. It was found that the monodispersed amino functionalized Fe3O4 spheres with diameters of 180–220 nm were uniformly attached on the surface of multi-walled carbon nanotubes. Owing to the synergistic effect between the amino groups and magnetic carbon nanotubes, the asprepared hybrid exhibited the high separation efficiency when used to remove Cu(II) from aqueous solutions. The adsorption isotherms of the as-prepared hybrid for Cu(II) removal fitted the Langmuir model, the maximum adsorption capacity of our amino-functionalized Fe3O4/MWCNTs hybrid calculated from the isotherm model is 30.49 mg g–1. This work demonstrated that the amino functionalized Fe3O4/multi-walled carbon nanotubes hybrid was promising as efficient adsorbent for heavy metal ions removal from wastewater in low concentration.
Similar content being viewed by others
References
Fu, F. and Wang, Q., J. Env. Manag., 2011, vol. 92, no. 3, pp. 407–418.
Qin, Z., Geng, C., Guo, H., Du, Z., Zhang, G., and Ji, S., J. Materials Research, 2013, vol. 28, no. 11, pp. 1449–1457.
da Fonseca, M.G., de Oliveira, M.M., Arakaki, L.N.H., Espinola, J.G.P., and Airoldi, C., J. Colloid & Interface Sci., 2005, vol. 285, no. 1, pp. 50–55.
Ögütveren, Ü.B., Koparal, S., and Özel, E., J. Env. Sci. & Health, Part A: Env. Sci. & Eng. & Toxicology, 1997, vol. 32, no. 3, pp. 749–761.
Arous, O., Gherrou, A., and Kerdjoudj, H., Desalination, 2004, vol. 161, no. 3, pp. 295–303.
Sõukand, Ü., Kängsepp, P., Kakum, R., et al., J. Material Cycles & Waste Management, 2010, vol. 12, no. 1, pp. 57–65.
Sedlak, D.L. and von Gunten, U., Science, 2011, vol. 331, no. 6013, pp. 42–43.
Kitoh, M., Shiramizu, M., and Sato, T., J. Material Cycles & Waste Management, 2015, vol. 17, vol. 3, pp. 590–597.
Iijima, S., Helical Microtubules of Graphitic Carbon Nature, 1991, vol. 354, no. 6348, pp. 56–58.
Dondero, W.E. and Gorga, R.E.., J. Polymer Sci. Part B: Polymer Physics, 2006, vol. 44, no. 5, pp. 864–878.
Lee, W.J., Maiti, U.N., Lee, J.M., Lim, J., Han, T.H., and Kim, S.O., Chem. Commun., 2014, vol. 50, no. 52, pp. 6818-6830.
Qu, J., Luo, C., Cong, Q., et al., J. Material Cycles & Waste Management, 2014, vol. 16, no. 1, pp. 162–166.
Tamailarasan, P. and Ramaprabhu, S., J. Phys. Chem., C, 2012, vol. 116, no. 27, pp. 14179–14187.
Wang, H., Zhou, A., Peng, F., Yu, H., and Yang, J., J. Colloid & Interface Sci., 2007, vol. 316, no. 2, pp. 277–283.
Kabbashi, N.A., Atieh, M.A., Al-Mamun, A., Mirghami, M.E., Alam, M., and Yahya, N., J. Env. Sci., 2009, vol. 21, no. 4, pp. 539–544.
Anitha, K., Namsani, S., and Singh, J.K., J. Phys. Chem., A, 2015, vol. 119, no. 30, pp. 8349–8358.
Pillay, K., Cukrowska, E., and Coville, N.J., J. Hazardous Materials, 2009, vol. 166, no. 2, pp. 1067–1075.
Li, Y., Liu, F., Xia, B., Du, Q., Zhang, P., Wang, D., Wang, Z., and Xia, Y., J. Hazardous Materials, 2010, vol. 177, no. 1, pp. 876–880.
Tofighy, M.A. and Mohammadi, T., Ceramics Int., 2015, vol. 41, no. 4, pp. 5464–5472.
Ghasemi, S., Karami, H., and Khanezar, H., J. Materials Sci., 2014, vol. 49, no. 3, pp. 1014–1024.
Sharma, V.K., Zboril, R., and Varma, R.S., Acc. Chem. Res., 2015, vol. 48, no. 2, pp. 182–191.
Prucek, R., Tucek, J., Kolarík, J., Hušková, I., Filip, J., Varma, R.S., Sharma, V.K., and Zboril, R., Env. Sci. & Tech., 2015, vol. 49, no. 4, pp. 2319–2327.
McCoy, T.M., Brown, P., Eastoe, J., and Tabor, R.F., ACS Appl. Mat. & Int., 2015, vol. 7, no. 3, pp. 2124–2133.
Wang, P., Shi, Q., Shi, Y., Clark, K.K., Stucky, G.D., and Keller, A.A., J. Am. Chem. Soc., 2008, vol. 131, no. 1, pp. 182–188.
Zhan, Y., Wan, X., Long, Z., Fan, Y., and He, Y., Russ. J. Appl. Chem., 2016, vol. 89, pp. 297–303.
Iram, M., Guo, C., Guan, Y., Ishfaq, A., and Liu, H., J. Hazardous Materials, 2010, vol. 181, no. 1, pp. 1039–1050.
Gupta, V., Agarwal, S., and Saleh, T.A., Water Res., 2011, vol. 45, no. 6, pp. 2207–2212.
Ji, L., Zhou, L., Bai, X., Shao, Y., Zhao, G., Qu, Y., Wang, C., and Li, Y., J. Materials Chemistry, 2012, vol. 22, no. 31, pp. 15853–15862.
Jiang, L., Li, S., Yu, H., Zou, Z., Hou, X., Shen, F., Li, C., and Yao, X., Appl. Sur. Sci., 2016, vol. 369, pp. 398–413.
Jia, B., Gao, L., and Sun, J., Carbon, 2007, vol. 45, no. 7, pp. 1476–1481.
Meng, F., Zhao, R., Zhan, Y., Lei, Y., Zhong, J., and Liu, X., Mat. Lett., 2011, vol. 65, no. 2, pp. 264–267.
Zhan, Y., Zhao, R., Lei, Y., Meng, F., Zhong, J., and Liu, X., Appl. Sur. Sci., 2011, vol. 257, no. 9, pp. 4524–4528.
Wan, J., Cai, W., Feng, J., Meng, X., and Liu, E., J. Mat. Chem., 2007, vol. 17, no. 12, 1188–1192.
Chidawanyika, W. and Nyokong, T., Carbon, 2010, vol. 48, no. 10, pp. 2831–2838.
Ngah, W.W., Endud, C., and Mayanar, R., Reactive & Func. Polym., 2002, vol. 50, no. 2, 181–190.
Ihsanullah, F., Al-Khaldi, B., Abu-Sharkh, A., Abulkibash, M., Qureshi, T., and Atieh, M.A., Desalination & Water Treatment, 2016, vol. 57, no. 16, pp. 7232–7244.
Shen, J., Liu, A., Tu, Y., Foo, G., Yeo, C., Chan-Park, M.B., Jiang, R., and Chen, Y., Energy & Env. Sci., 2011, vol. 4, no. 10, pp. 4220–4229.
Author information
Authors and Affiliations
Corresponding author
Additional information
The text was submitted by the authors in English.
Rights and permissions
About this article
Cite this article
Zhan, Y., Hu, H., He, Y. et al. Novel amino-functionalized Fe3O4/carboxylic multi-walled carbon nanotubes: One-pot synthesis, characterization and removal for Cu(II). Russ J Appl Chem 89, 1894–1902 (2016). https://doi.org/10.1134/S1070427216110227
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427216110227