Abstract
The influence of the concentration of iron(III) tris(acetylacetonate) on the physicomechanical and rheological properties of polyurethane composites prepared by cold curing was examined.
Similar content being viewed by others
References
Chirkov, N.M., Matkovskii, P.E., and D’yachkovskii, F.S., Polimerizatsiya na kompleksnykh metalloorganicheskikh katalizatorakh (Polymerization on Complex Organometallic Catalylsts), Moscow: Khimiya, 1976.
Saunders, J.H. and Frish, K.C., Polyurethanes. Chemistry and Technology, part 1: Chemistry, New York: Interscience, 1962.
Lipatova, T.E., Kataliticheskaya polimerizatsiya oligomerov i formirovanie polimernykh setok (Catalytic Polymerization of Oligomers and Formation of Polymer Networks), Kiev: Naukova Dumka, 1974.
Volkova, E.R., Tereshatov, V.V., and Vnutskikh, Zh.A., Zh. Prikl. Khim., 2010, vol. 83, no. 8, pp. 1266–1273.
Volkova, E.R., Tereshatov, V.V., and Karmanov, V.I., Zh. Prikl. Spektrosk., 2010, vol. 77, no. 5, pp. 789–792.
Malkin, A.Ya. and Kulichikhin, S.G., Reologiya v protsessakh obrazovaniya i prevrashcheniya polimerov (Rheology in Formation and Transformations of Polymers), Moscow: Khimiya, 1985.
Rozenberg, B.A., Adv. Polym. Sci., 1986, vol. 75, pp. 113–165.
Zharkov, V.V., Strikovskii, A.G., and Verteletskaya, T.E., Vysokomol. Soedin., Ser. A, 1992, vol. 33, no. 5, pp. 142–147.
Kozlova, T.V., Letunovskii, M.P., and Zharkov, V.V., Vysokomol. Soedin., 1983, vol. 25, no. 9, pp. 1929–1933.
Merten, R. von, Braun, G., and Laurer, D., Kunststoffe, 1965, vol. 55, pp. 249–255.
Vatulev, V.N., Laptii, S.V., and Kercha, Yu.Yu., Infrakrasnye spektry i struktura poliuretanov (Infrared Spectra and Structure of Polyurethanes), Kiev: Naukova Dumka, 1987.
Author information
Authors and Affiliations
Additional information
Original Russian Text © E.R. Volkova, V.V. Tereshatov, V.I. Karmanov, 2011, published in Zhurnal Prikladnoi Khimii, 2011, Vol. 84, No. 8, pp. 1350–1354.
Rights and permissions
About this article
Cite this article
Volkova, E.R., Tereshatov, V.V. & Karmanov, V.I. Influence of the concentration of iron(III) tris(acetylacetonate) used as urethane formation catalyst on the structure and properties of cold-cure polyurethanes. Russ J Appl Chem 84, 1414–1417 (2011). https://doi.org/10.1134/S1070427211080209
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1070427211080209