Abstract
The possibility of using sound-absorbing surfaces for attenuating the intensity of detonation waves propagating in hydrogen–air mixtures has been experimentally studied in a cylindrical detonation tube open at one end, with an explosive initiated by spark discharge at the closed end. Sound-absorbing elements were made of an acoustic-grade foamed rubber with density of 0.035 g/cm3 containing open pores with an average diameter of 0.5 mm. The degree of attenuation of the detonation wave front velocity was determined as dependent on the volume fraction of hydrogen in the gas mixture.
Similar content being viewed by others
References
M. F. Ivanov, A. D. Kiverin, and M. A. Liberman, Phys. Rev. E 83, 056313 (2011).
M. S. Krivokorytov, V. V. Golub, and I. A. Moralev, Tech. Phys. Lett 39 (9), 814 (2013).
V. V. Azatyan, S. N. Medvedev, and S. M. Frolov, Russ. J. Phys. Chem. B 4, 308 (2010).
G. Dupre, O. Peraldi, J. H. Lee, et al., Prog. Astronaut. Aeronaut. 114, 248 (1988).
M. S. Kuznetsov, V. I. Alekseev, and S. B. Dorofeev, Shock Waves 10, 217 (2000).
M. I. Radulescu and J. H. S. Lee, Combust. Flame 131, 29 (2002).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.Yu. Bivol, S.V. Golovastov, V.V. Golub, 2015, published in Pis’ma v Zhurnal Tekhnicheskoi Fiziki, 2015, Vol. 41, No. 24, pp. 17–22.
Rights and permissions
About this article
Cite this article
Bivol, G.Y., Golovastov, S.V. & Golub, V.V. Propagation of detonation wave in hydrogen–air mixture in channels with sound-absorbing surfaces. Tech. Phys. Lett. 41, 1167–1169 (2015). https://doi.org/10.1134/S1063785015120184
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063785015120184