Abstract
The article reviews backfilling complexes operating at Kazakhstan mines and describes laboratory and industrial tests of effect of cement-ash binder and plastifier combination on rheological properties and strength of filling masses.
Similar content being viewed by others
References
Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Progress in Backfilling in Kazakhstan Mines, Gorny Zh., 2012, no. 10.
Gusev, Yu.P., Berezikov, E.P., Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Resource-Saving Geotechnologies in Maleevsky Mine of Zyryanovsky Mining and Metallurgical Integrated Works (Kazzinc Co.), Gorny Zh., 2008, no. 11.
Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Analysis of Backfill Mixture Compositions for Underground Mining in East Kazakhstan, Gorny Zh., 2010, no. 4.
Berezikov, E.P., Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Diversification of Backfill Mixture Components in Preparation Flowsheet, Gorny Zh. Kazakh., 2009, no. 4.
Bitimbaev, M.Zh., Krupnik, L.A., and Shaposhnik, Yu.N., Teoriya i praktika zakladochnykh rabot pri razrabotke mestorozhdenii poleznykh iskopaemykh (Theory and Practice of Backfilling in Mineral Mining), Almaty: Assots. Vuzov Kazakhstana, 2012.
Vorob’ev, A.E., Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Methods of Backfill Mixture Feeding in Mines in East Kazakhstan, Gorny vestn. Uzbek., 2010, vol. 43, no. 4.
Barilyuk, A.I., Ryshkel’, I.A., Tkachev, V.M., Makarov, A.B., Ort, V.G., and Ananin, A.I., Orlovsky Deposit Mining with Top-Down Horizontal Slicing Method, Gorny Zh., 2002, no. 5.
Nikolaev, E.N., Gul’tyaev, V.G., and Kozhbanov, K.Kh., Technology of Hardening Backfill Mixture Preparation in Orlovsky Mine, Gorny Zh., 2002, no. 5.
Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Selection of the Efficient Backfilling Technology in Suzdal’sky Mine of Alel JSC, Trudy KarGTU, 2011, vol. 43, no. 2.
Krupnik, L.A., Shaposhnik, Yu.N., and Shaposhnik, S.N., Possibility to Improve Strength Properties of Filling Masses in Mining with Slicing Systems, Gorny Zh. Kazakh., 2012, no. 6.
Anushenkov, A.N., Freidin, A.M., and Shalaurov, V.A., Preparation of Molten Solidifying Fill from Production Wastes, Journal of Mining Science, 1998, vol. 34, no. 1, pp. 86–90.
Muzgina, V.S., Experience and Prospects of Using Production Waste in Backfill Mixtures, Tr. IGD A.D. Kunaeva, 2004, no. 68.
Falikman, V.R., Vainer, A.Ya., and Bashlykov, N.F., New Generation of Super Plastifiers, Beton Zhelezobeton, 2000, no. 5.
Krupnik, L.A., Shaposhnik, Yu.N., Shaposhnik, S.N., and Shushkevich, K.A., Selection of Backfill Mixture Feeding Method in Underground Mines Tr. IGD A.D. Kunaeva, 2010, no. 79.
Metodicheskie ukazaniya po opredeleniyu normativnoi prochnosti tverdeyushchei zakladki i otsenke prochnostnykh svoistv iskusstvennykh massivov (Instructional Guidelines on Determination of Hardening Backfill Mixture Strength Characteristics and Evaluation of Strength of Filling Masses), Leningrad: VNIMI, 1975.
Normy tekhnologicheskogo proektirovaniya gornodobyvayushchikh predpriyatii s podzemnym sposobom razrabotki (metodicheskie rekomendatsii) (Production Design Standards for Underground Mines), under Decree of Committee for Governmental Control over Emergencies and Industrial Safety of the Republic of Kazakhstan, no. 46, dated Dec 4, 2008.
Author information
Authors and Affiliations
Additional information
Original Russian Text © L.A. Krupnik, Yu.N. Shaposhnik, S.N. Shaposhnik, A.K. Tursunbaeva, 2013, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2013, No. 1, pp. 95–105.
Rights and permissions
About this article
Cite this article
Krupnik, L.A., Shaposhnik, Y.N., Shaposhnik, S.N. et al. Backfilling technology in Kazakhstan mines. J Min Sci 49, 82–89 (2013). https://doi.org/10.1134/S1062739149010103
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739149010103