Skip to main content
Log in

Experimental and Numerical Investigations into Heat Exchange and Stability of Circulation during Liquid Metals’ Boiling in Assemblies of Fast Neutron Reactors in Accident Regimes

  • NUCLEAR POWER PLANTS
  • Published:
Thermal Engineering Aims and scope Submit manuscript

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

Abstract

Cooling of the core in fast neutron reactors in accident conditions (ULOF, UTOP) leads to the study of regimes with reduced coolant flow rates or during natural convection in fuel assemblies. The results of experiments on heat exchange and the stability of circulation during boiling of a sodium and sodium-potassium alloy on the models of single and in a system of parallel fuel assemblies with natural coolant circulation are presented. It is shown that the boiling process of liquid metals in fuel assemblies has a complex structure, is characterized by both stable and pulsating regimes with significant fluctuations in flow rate, pressure, temperature, and the occurrence of a heat exchange crisis. The hydrodynamic interaction of the circulation contours can lead to a significant increase in the amplitude of fluctuations in the coolant flow rate in them (“resonance” of flow rate pulsations) and a possible “blocking” or inversion of the coolant flow rate, an increase in the temperature of the coolant, and the cladding of the fuel elements (interchannel instability effect) and crisis. The data of calculated and experimental studies of the liquid metal boiling in FA models are compared. The effect of the surface roughness of the fuel rods on the heat exchange and flow regimes during a liquid metal boiling in bundles is demonstrated. It has been shown experimentally that there is no steaming of the sodium cavity and no change in the boiling regime in the fuel assembly when a sodium cavity is located in a fuel assembly designed to compensate for the positive sodium void reactivity effect during sodium boiling. There is the possibility of continued cooling of the fuel elements in the fuel assembly. The data on heat exchange during boiling of liquid metals in bunches are generalized, and a cartogram of the flow regimes of a two-phase flow of liquid metals in bundles is constructed that differs significantly from the cartogram for water. The boundaries between flow regimes are approximated by simple dependencies.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.
Fig. 10.

Similar content being viewed by others

REFERENCES

  1. Yu. M. Ashurko, K. A. Andreeva, I. V. Bur’evskii, A. V. Volkov, V. A. Eliseev, A. V. Egorov, I. A. Kuznetsov, L. V. Korobeinikova, V. I. Matveev, N. V. Solomonova, Yu. S. Khomyakov, and A. N. Tsarapkina, “Investigation of the influence of the sodium void reactivity effect on the safety of a high-capacity sodium fast reactor,” Izv. Vyssh. Uchebn. Zaved., Yad. Energ., No. 3, 5–14 (2014).

  2. Yu. M. Ashurko, A. V. Volkov, K. F. Raskach, and N. V. Solomonova, “Neutron-physical model impact on the calculation of a serious accident with sodium boiling in a fast reactor,” At. Energy 122, 217–225 (2017).

    Article  Google Scholar 

  3. A. Kaizer and F. Huber, “Sodium boiling experimental a low power under natural convection,” Nucl. Eng. Des. 100, 367–376 (1987). https://doi.org/10.1016/0029-5493(87)90086-0

    Article  Google Scholar 

  4. K. Yamaguchi, “Flow pattern and dryout under sodium boiling conditions,” Nucl. Eng. Des. 99, 247–263 (1987). https://doi.org/10.1016/0029-5493(87)90125-7

    Article  Google Scholar 

  5. A. D. Efanov, A. P. Sorokin, E. F. Ivanov, G. P. Bogoslovskaya, V. P. Kolesnik, S. S. Martsinyuk, G. A. Sorokin, and K. S. Rymkevich, “An investigation of the heat transfer and stability of liquid-metal coolant boiling in a natural circulation circuit,” Therm. Eng. 50, 194–201 (2003).

    Google Scholar 

  6. A. D. Efanov, A. P. Sorokin, E. F. Ivanov, G. P. Bogoslovskaia, G. A. Sorokin, V. V. Ivanov, A. D. Volkov, G. A. Sorokin, and I. R. Zueva, “Heat transfer under natural convection of liquid metal during its boiling in a system of channels,” Therm. Eng. 54, 214–222 (2007). https://doi.org/10.1134/S0040601507030081

    Article  Google Scholar 

  7. G. A. Sorokin and A. P. Sorokin, “Experimental and numerical investigations of liquid metal boiling in fuel subassemblies under natural circulation conditions,” Prog. Nucl. Energy. 47, 656–663 (2005). https://doi.org/10.1016/j.pnucene.2005.05.069

    Article  Google Scholar 

  8. G. A. Sorokin, H. Ninokata, A. P. Sorokin, H. Endo, and Eu. F. Ivanov, “Numerical study of liquid metal boiling in the system of parallel bundles under natural circulation,” J. Nucl. Sci. Technol. 43, 623–634 (2006). https://doi.org/10.1080/18811248.2006.9711142

    Article  Google Scholar 

  9. A. P. Sorokin, Yu. A. Kuzina, and E. F. Ivanov, “Heat transfer at boiling of liquid metallic coolants in fuel assemblies of fast reactors under emergency conditions,” Vopr. At. Nauki Tekh., Ser.: Yad.-Reakt. Konstanty, No. 3, 176–194 (2018). https://vant.ippe.ru/images/ pdf/2018/3-17.pdf

  10. A. P. Sorokin, Yu. A. Kuzina, and E. F. Ivanov, “Characteristics of heat transfer during boiling of liquid metal in the fuel assemblies of fast reactors in emergency regimes,” At. Energy 126, 73–82 (2019).

    Article  Google Scholar 

  11. B. A. W. Bennett, G. F. Hewitt, H. A. Kearsey, R. K. F. Keeys, and P. M. C. Lacey, “Flow visualization studies of boiling water at high pressures,” Proc. Inst. Mech. Eng., Conf. Proc. 180, 260–283 (1965). https://doi.org/10.1243/PIME_CONF_1965_180_119_02

  12. Yu. N. Kuznetsov, Heat Transfer in the Nuclear Reactor Safety Problem (Energoatomizdat, Moscow, 1989) [in Russian].

    Google Scholar 

  13. Y. Kikuchi, T. Takahushi, K. Haga, and T. Okouchi, “Incipient boiling of sodium in single-pin annular channel,” J. Nucl. Sci. Technol. 11, 172–186 (1974). https://doi.org/10.1080/18811248.1974.9730645

    Article  Google Scholar 

  14. Yu. A. Zeigarnik, P. L. Kirillov, P. A. Ushakov, and M. N. Ivanovskii, “Liquid metal heat transfer under boiling and condensation,” Therm. Eng. 48, 169–176 (2001).

    Google Scholar 

  15. V. M. Borishanskii, K. A. Zhokhov, A. A. Andreevskii, M. A. Putilin, A. P. Kozyrev, and L. L. Shneiderman, “Heat transfer in boiling alkali metals,” Sov. At. Energy 19, 1090–1092 (1965).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. P. Sorokin.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sorokin, A.P., Ivanov, E.F., Kuzina, J.A. et al. Experimental and Numerical Investigations into Heat Exchange and Stability of Circulation during Liquid Metals’ Boiling in Assemblies of Fast Neutron Reactors in Accident Regimes. Therm. Eng. 68, 752–762 (2021). https://doi.org/10.1134/S0040601521090093

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0040601521090093

Keywords:

Navigation