Abstract
The model of a dry-bottom furnace having different wall-mounted burner layout arrangements used for estimating the flame thermal characteristics in carrying out design and engineering works, and during boiler adjustment and investigation activities is considered. A model application procedure is proposed. By using the suggested proposals it becomes possible to achieve better reliability of the system for admitting reagent and controlled inert flows into the furnace, to minimize the fouling of heating surfaces during the combustion of slagging solid fuels, and to increase the period of boiler equipment operation between repairs.
Similar content being viewed by others
References
V. V. Osintsev, M. P. Sukharev, E. V. Toropov, and K. V. Osintsev, “Controlling the thermal structure of the flame in the furnaces of BKZ-210-140F boilers with single-tier frontal arrangement of multifunctional burners when burning various kinds of fuel,” Therm. Eng. 52(9), 678 (2005).
Thermal Design of Boiler Units (a Standard Method) (Energiya, Moscow, Leningrad, 1973) [in Russian].
Thermal Design of Boilers. A Standard Method, a revised and extended 3rd ed. (NPO TsKTI-VTI, St. Petersburg, 1998) [in Russian].
E. Kh. Verbovetskii and N. G. Zhmerik, Methodical Guidelines on Designing Furnace Devices for Power Plant Boilers (NPO TsKTI-VTI, St. Petersburg, 1996) [in Russian].
V. V. Osintsev, G. F. Kuznetsov, V. V. Petrov, and M. P. Sukharev, “Specific features and organization of the flame process in a furnace equipped with multifunctional burners,” Elektr. Stn., No. 11, 14–19 (2002).
V. V. Osintsev, A. K. Dzhundubaev, V. Ya. Gigin, V. A. Rogachev, Yu. D. Potaptsev, and V. I. Borzionova, “Shifting a BKZ-160 boiler to operate using staged fuel combustion technology,” Elektr. Stn., No. 3, 25–29 (1993).
V. V. Osintsev, A. K. Dzhundubaev, G. F. Kuznetsov, O. V. Dronov, V. V. Petrov, V. P. Voronin, N. F. Panov, N. I. Kryukov, and V. I. Murzin, “Shifting the BKZ-210-140F boiler at the Chelyabinsk TETs-2 cogeneration station for the technology of firing natural gas with separate admission of reagents into the furnace,” Elektr. Stn., No. 7, 12–17 (1994).
V. V. Osintsev, Val. V. Osintsev, A. M. Khidiyatov, I.-Kh. L. Rabovitser, L. V. Deev, M. A. Izyumov, Yu. B. Raiskii, N. M. Shchapin, and V. I. Kuzin, “Improvement of methods for reducing temperature nonuniformities in furnaces with frontal arrangement of burners,” Therm. Eng. 37(4) (1990).
V. V. Osintsev, “The aerodynamics and temperature fields in the gas conduits of coal-fired boilers,” Therm. Eng. 36(11) (1989).
K. V. Osintsev and V. V. Osintsev, “Taking into account the nonuniform and unstable thermal structure of a furnace fireball when using multifunctional burners,” Therm. Eng. 54(6), 492 (2007).
D. A. Frank-Kamenetskii, Diffusion and Heat Transfer in Chemical Kinetics (Akad. Nauk SSSR, Moscow, 1947) [in Russian].
V. I. Babii and Yu. F. Kuvaev, Pulverized Coal Combustion and Calculation of a Pulverized-Coal Flame (Energoatomizdat, Moscow, 1986) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © K.V. Osintsev, 2015, published in Teploenergetika.
Rights and permissions
About this article
Cite this article
Osintsev, K.V. Extending the practical application range of the dry-bottom furnace analysis model. Therm. Eng. 62, 123–129 (2015). https://doi.org/10.1134/S0040601515010085
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601515010085