Abstract
This paper presents the design of a volumetric feeder of non-free-flowing powders which is comparable in dosing accuracy to weighing systems. The operating efficiency of the main units was studied numerically (using the discrete element method) and experimentally. A continuous precision volumetric feeder design is proposed.
Similar content being viewed by others
REFERENCES
G. Vetter, “Systematology and Accuracy of Dosing Methods for Process Components," in The Dosing Handbook (Elsevier Adv. Technol., New York, 1998), pp. 3–44.
S. B. Stazhevsky, E. I. Shemyakin, A. A. Kramadzhan, N. F. Stativko, G. N. D’yakov, G. K. Lev, and V. K. Shanin, “Bulk Material Feeder," USSR Author’s Certificate No. 1557033, MPK B 65 G 65/48 (2000.01); Publ. April 15, 1990, Bull. No. 14.
E. P. Rusin, and G. N. Khan, “Justification of a Storage Hopper Design for a High-Precision Volumetric Feeder," Interexpo Geo-Siberia 2, 173–179 (2020).
R. Kolatac, “Gravimetric and Volumetric Feeding of Particulate Solids. Particulate Solids, Bin Hopper and Metering—Basic Fundamentals," in Proc. of 1976 Nat. Waste Processing Conf., Boston (USA), May 23–26, 1976 (ASME, New York, 1976), pp. 361–372.
B. M. Rumyantsev and E. S. Firskin, “Disc Feeder," USSR Author’s Certificate No. 401616, MPC B 65 g 65/48, G 01 f 13/00; Publ. October 12, 1973, Bull. No. 41.
P. A. Cundall and O. D. L. Strack, “A Discrete Numerical Model for Granular Assemblies," Geotechnique 29 (1), 47–65 (1979).
O. B Kovalev and I. O. Kovaleva, “Modeling of the Random Packing of a Loose Layer of Polydisperse Spherical Particles," Prikl. Mekh. Tekh. Fiz. 55 (4), 184–192 (2014) [J. Appl. Mech. Tech. Phys. 55 (4), 709–717 (2014); https://doi.org/10.1134/S0021894414040178].
S. K.Hou, V. Wang, Z. Ya., et al., “Force Chain Characteristics and Effects of a Dense Granular Flow System in a Third Body Interface during the Shear Dilatancy Process," Prikl. Mekh. Tekh. Fiz. 59 (1), 178–188 (2018) [J. Appl. Mech. Tech. Phys. 59 (1), 153–162 (2018); https://doi.org/10.1134/S0021894418010194].
W. J. Xu, G. Y. Liu, and H. Yang, “Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models," Acta Geotech. 15, 2813–2828 (2020).
N. A. Bogulskaya and I. O Bogulsky “Computer Simulation of Motion of an Inhomogeneous Granular Medium," Prikl. Mekh. Tekh. Fiz. 61 (2), 117–124 (2020) [J. Appl. Mech. Tech. Phys. 61 (2), 256–262 (2020); https://doi.org/10.1134/S002189442002011X].
J. Schafer, S. Dippel, and D. E. Wolf, “Force Schemes in Simulations of Granular Materials," J. Phys. 6 (1), 5–20 (1996).
C. Thornton, “Coefficient of Restitution for Collinear Collisions of Elastic Perfectly Plastic Spheres," Trans. ASME, J. Appl. Mech. 64 (2), 383–386 (1997).
H. Kruggel-Emden, E. Simsek, and S. Rickelt, et al., “Review and Extension of Normal Force Models for the Discrete Element Method," Powder Technol. 171 (3), 157–173 (2007).
A. D. Zimon, Adhesion of Dust and Powders (Khimiya, Moscow, 1976) [in Russian].
K. Terzaghi, Theoretical Soil Mechanics (J. Wiley and Sons, New York, 1943).
A. F. Revuzhenko, S. B. Stazhevsky, and E. I. Shemyakin, “On the Asymmetry of Plastic Flow in a Converging Symmetric Channel," Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 3, 3–9 (1977).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, 2021, Vol. 63, No. 3, pp. 173-182. https://doi.org/10.15372/PMTF20220317.
Rights and permissions
About this article
Cite this article
Rusin, E.P., Stazhevsky, S.B. & Khan, G.N. HIGH-PRECISION VOLUMETRIC POWDER FEEDER. J Appl Mech Tech Phy 63, 524–532 (2022). https://doi.org/10.1134/S0021894422030178
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894422030178