Abstract
A nonlinear thermal analysis of a hollow functionally graded cylinder is performed in the present paper. A power function distribution is used for simulation of non-homogeneity of the material used. A temperature dependence is employed for the thermal conductivity. These simulations reduce the problem to a nonlinear differential equation with a variable coefficient. A semi-analytical method of successive approximations is employed for solving this equation. The convergence of the method is studied for different parameters of the problem by checking two criteria: convergence of the sum of the infinite series and condition of smallness of the residual of the responses. An exponentially function is used for simulation of the nonlinear dependence of cylinder material properties on temperature.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
N. Tutuncu and M. Ozturk, “Exact Solution for Stresses in Functionally Graded Pressure Vessels,” Composites, B: Eng. 32, 683–686 (2001).
M. Jabbari, S. Sohrabpour, and M. R. Eslami, “Mechanical and Thermal Stresses in a Functionally Graded Hollow Cylinder due to Radially Symmetric Loads,” Int. J. Pressure Vessels Piping 79, 493–497 (2002).
Z. S. Shao, “Mechanical and Thermal Stresses of a Functionally Graded Circular Hollow Cylinder with Finite Length,” Int. J. Pressure Vessels Piping 82, 155–163 (2005).
L. Wu, J. Zhiqing, and L. Jun, “Thermoelastic Stability of Functionally Graded Cylindrical Shells,” Compos. Struct. 70, 60–68 (2005).
M. J. Khoshgoftar, A. G. Arani, and M. Arefi, “Thermoelastic Analysis of a Thick Walled Cylinder Made of Functionally Graded Piezoelectric Material,” Smart Mater. Struct. 18(11), 115007 (2009).
M. Arefi and G. H. Rahimi, “Non Linear Analysis of a Functionally Graded Square Plate with Two Smart Layers as Sensor and Actuator under Normal Pressure,” Smart Struct. Syst. 8(5), 433–448 (2011).
M. Arefi and G. H. Rahimi, “Studying the Nonlinear Behavior of the Functionally Graded Annular Plates with Piezoelectric Layers as a Sensor and Actuator under Normal Pressure,” Smart Struct. Syst. 9(2), 127–143 (2012).
M. Arefi and G. H. Rahimi, “Three-Dimensional Multi-Field Equations of a Functionally Graded Piezoelectric Thick Shell with Variable Thickness, Curvature and Arbitrary Nonhomogeneity,” Acta Mech. 223, 63–79 (2012).
M. Arefi, G. H. Rahimi, and M. J. Khoshgoftar, “Optimized Design of a Cylinder under Mechanical, Magnetic and Thermal Loads as a Sensor or Actuator using a Functionally Graded Piezomagnetic Material,” Int. J. Phys. Sci. 6(27), 6315–6322 (2011).
M. Arefi, G. H. Rahimi, and M. J. Khoshgoftar, “Exact Solution of a Thick Walled Functionally Graded Piezoelectric Cylinder under Mechanical, Thermal and Electrical Loads in the Magnetic Field,” Smart Struct. Syst. 9(5), 427–439 (2012).
M. H. Babaei and Z. T. Chen, “Exact Solutions for Radially Polarized and Magnetized Magnetoelectroelastic Rotating Cylinder,” Smart Mater. Struct. 17, 025035 (2008).
M. H. Babaei and Z. T. Chen, “The Transient Coupled Thermopiezoelectric Response of a Functionally Graded Piezoelectric Hollow Cylinder to Dynamic Loadings,” Proc. Roy. Soc., Ser. A: Math. Phys. Eng. Sci. 466, 1077–1091 (2010).
W. L. Straube and R. M. Arthur, “Theoretical Estimation of the Temperature Dependence of Backscattered Ultrasonic Power for Noninvasive Thermometry,” Ultrasound Med. Biol. 20(9), 915–922 (1994).
Y. Ootao, Y. Tanigawa, and T. Fukuda, “Axisymmetric Transient Thermal Stress Analysis of a Multilayered Composite Hollow Cylinder,” J. Therm. Stresses 14(2), 201–213 (1991).
R. A. Ketcham, E. C. Beam, and M. A. Kominz, “Effects of Temperature-Dependent Material Properties and Radioactive Heat Production on Simple Basin Subsidence Models,” Earth Planetary Sci. Lett. 130(1–4), 31–44 (1995).
D. Campbell, A. Chilingarov, and T. Sloan, “Frequency and Temperature Dependence of the Depletion Voltage from CV Measurements for Irradiated Si Detectors,” Nuclear Instrum. Methods Phys. Res., Sect. A: Accelerators, Spectrometers, Detectors Associat. Equipment. 492(3), 402–410 (2002).
M. Jabbari, A. Bahtui, and M. R. Eslami, “Axisymmetric Mechanical and Thermal Stresses in Thick Short Length FGM Cylinders,” Int. J. Pressure Vessels Piping 86(5), 296–306 (2009).
O. Yamashita, “Effect of Temperature Dependence of Electrical Resistivity on the Cooling Performance of a Single Thermoelectric Element,” Appl. Energ. 85(10), 1002–1014 (2008).
O. Yamashita, “Effect of Linear and Non-Linear Components in the Temperature Dependences of Thermoelectric Properties on the Cooling Performance,” Appl. Energy 86(9), 1746–1756 (2009).
O. Yamashita, “Effect of Linear and Non-Linear Components in the Temperature Dependences of Thermoelectric Properties on the Energy Conversion Efficiency,” Energy Convers. Management 50(8), 1968–1975 (2009).
P. D. Löper, P. A. Richter, M. Hermle, et al., “Analysis of the Temperature Dependence of the Open-Circuit Voltage,” in Energy Procedia: Proc. of the 2nd Int. Conf. Crystalline Silicon Photovoltaics (2012), Vol. 27, pp. 135–142.
P. Singh and N. M. Ravindra, “Temperature Dependence of Solar Cell Performance-An Analysis,” Solar. Energy Mater. Solar Cells 101, 36–45 (2012).
G. H. Rahimi, M. Arefi, and M. J. Khoshgoftar, “Application and Analysis of Functionally Graded Piezoelectrical Rotating Cylinder as Mechanical Sensor Subjected to Pressure and Thermal Loads,” Appl. Math. Mech. 32(8), 997–1008 (2011).
A. Banerjee, B. Bhattacharya, and A. K. Mallik, “Large Deflection of Cantilever Beams with Geometric Non-Linearity: Analytical and Numerical Approaches,” Int. J. Nonlinear Mech. 43, 366–376 (2008).
Y. C. Jiao, Y. Yamamoto, C. Dang, and Y. Hao, “An Aftertreatment Technique for Improving the Accuracy of Adomian’s Decomposition Method,” Comput. Math. Appl. 43(6/7), 783–798 (2002).
M. H. Hojjati and S. Jafari, “Semi-Exact Solution of Elastic Non-Uniform Thickness and Density Rotating Disks by Homotopy Perturbation and Adomian’s Decomposition Methods. Part 1. Elastic Solution,” Int. J. Pressure Vessels Piping 85(12), 871–878 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M. Arefi.
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 56, No. 2, pp. 117–123, March–April, 2015.
Rights and permissions
About this article
Cite this article
Arefi, M. Nonlinear thermal analysis of a hollow functionally graded cylinder with temperature-variable material properties. J Appl Mech Tech Phy 56, 267–273 (2015). https://doi.org/10.1134/S0021894415020121
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894415020121