Skip to main content
Log in

Manufacturing and Characteristics of Composite Scintillators Based on Lithium Glass

  • NUCLEAR EXPERIMENT TECHNIQUE
  • Published:
Instruments and Experimental Techniques Aims and scope Submit manuscript

Abstract

Samples of composite scintillators consisting of NE 912 lithium glass fragments located in an organic matrix have been developed and manufactured. Samples were made in sizes of ∅40 × 2 mm with 25, 30, and 35% lithium glass concentration. Epoxy and acrylic resins, as well as a silicone compound, were used as a neutral matrix. Samples were tested as part of a scintillation detector on a thermal neutron beam and with source of γ-quanta 60Co. The efficiency of thermal neutrons' registration and γ-sensitivity compared to a homogeneous glass scintillator was determined. The results obtained confirmed the possibility of reducing the sensitivity of the detector to γ-quanta by two orders of magnitude due to a slight (50%) decrease in the efficiency of neutron detection.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.

Similar content being viewed by others

REFERENCES

  1. Ianakiev, K.D., Hehlen, M.P., Swinhoe, M.T., Favalli, A., Iliev, M.L., Lin, T.C., Bennett, B.L., and Barker, M.T., Nucl. Instrum. Methods Phys. Res., Sect. A, 2015, vol. 784, p. 189. https://doi.org/10.1016/j.nima.2014.10.073

    Article  Google Scholar 

  2. Mayer, M., Nattress, J., Trivelpiece, C., and Jovanovic, I., Nucl. Instrum. Methods Phys. Res., Sect. A, 2015, vol. 784, p. 168. https://doi.org/10.1016/j.nima.2014.09.023

    Article  Google Scholar 

  3. Rich, G.C., Kazak, K., Martinez, H.P., and Gushue, T., Nucl. Instrum. Methods Phys. Res., Sect. A, 2015, vol. 794, p. 15. https://doi.org/10.1016/j.nima.2015.05.004

    Article  Google Scholar 

  4. Kuz’min, E.S. and Zimin, I.Yu., Instrum. Exp. Tech., 2021, vol. 54, no. 5, p. 657. https://doi.org/10.1134/S0020441221050201

    Article  Google Scholar 

  5. Bokuchava, G.D., Kruglov, A.A., Papushkin, I.V., Zhuravlev, V.V., Petukhova, T.B., Murashkevich, S.M., Truntova, L.A., and Zernin, N.D., J. Surf. Invest.: X‑ray, Synchrotron Neutron Tech., 2022, vol. 16, no. 5. https://doi.org/10.31857/S1028096022050077

  6. Kuzmin, E.S., Bokuchava, G.D., Zimin, I.Yu., Kruglov, A.A., Kuchinskiy, N.A., and Malyshev, V.L., Instrum. Exp. Tech., 2021, vol. 64, no. 2, p. 195. https://doi.org/10.1134/S0020441221010279

    Article  Google Scholar 

  7. Knoll, G.F., Radiation Detection and Measurement, Wiley, 1999, 3th ed.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to E. S. Kuzmin.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kuzmin, E.S., Bokuchava, G.D., Zimin, I.Y. et al. Manufacturing and Characteristics of Composite Scintillators Based on Lithium Glass. Instrum Exp Tech 65, 583–588 (2022). https://doi.org/10.1134/S0020441222040212

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S0020441222040212

Navigation