Abstract
The schematic design is proposed to control the output of high voltage MOSFET switches of a push-pull high voltage pulser for mass spectrometry applications. The design provides a way to form symmetrical opening and closing gating pulses for the output MOSFET transistors. This solution enables one to avoid the case of high through current, which can damage the output transistors of the pulser. Furthermore, the output pulse width can be decreased up to 70 ns while the repetition rate can exceed 100 kHz using the suggested schematic. The performance of the suggested design is proved by experimental testing of a pulser built in our laboratory.
Similar content being viewed by others
References
Bernius, M.T. and Chutjian, A., Rev. Sci. Instrum., 1989, vol. 60, no. 4, p. 779. doi 10.1063/1.1141018
Bernius, M.T. and Chutjian, A., Rev. Sci. Instrum., 1990, vol. 61, no. 2, p. 925. doi 10.1063/1.1141946
Loboda, A.V. and Dodonov, A.F., Rev. Sci. Instrum., 1995, vol. 66, no. 9, p. 4740. doi 10.1063/1.1145282
Baker, R.J. and Johnson, B.P., Rev. Sci. Instrum., 1993, vol. 64, no. 6, p. 1655. doi 10.1063/1.1144043
Baker, R.J. and Ward, S.T., Electronics Lett., 1994, vol. 30, no. 20, p. 1634. doi 10.1049/el:19941126
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.V. Filatov, A.A. Kholomeev, V.V. Brusov, V.I. Kozlovskiy, 2016, published in Pribory i Tekhnika Eksperimenta, 2016, No. 5, pp. 47–51.
Rights and permissions
About this article
Cite this article
Filatov, V.V., Kholomeev, A.A., Brusov, V.V. et al. Control of the output transistors gating voltage for high voltage push-pull pulser. Instrum Exp Tech 59, 666–669 (2016). https://doi.org/10.1134/S0020441216040059
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020441216040059