Abstract
An arc-discharge-based electron source is described, which is designed for forming a pulsed wideaperture electron beam in the forevacuum pressure range (4–15 Pa). At an accelerating voltage of 12 kV, a current of 80 A was extracted from the emitting surface with an area of 80 cm2 in the submillisecond range of pulse durations. The current density distribution over the beam cross section is close to a Gaussian function, and the surface-averaged beam energy density in a pulse reached 10 J/cm2.
Similar content being viewed by others
References
Proskurovsky, D., Rotshtein, V., Ozur, G., et al., Surf. Coat. Technol., 2000, nos. 1–3, p. 49.
Koval, N.N., Shchanin, P.M., Devyatkov, V.N., et al., Instrum. Exp. Tech., 2005, vol. 48, p. 117.
Burdovitsin, V.A. and Oks, E.M., Laser Part. Beams, 2008, vol. 26, no. 4, p. 619.
Burdovitsin, V.A., Klimov, A.S., and Oks, E.M., Phys. Tech. Lett., 2009, vol. 35, p. 511.
Burdovitsin, V.A., Oks, E.M., Skrobov, E.V., and Yushkov, Yu.G., Perspekt. Mater., 2011, no. 6, p. 77.
Yushkov, Yu.G., Burdovitsin, V.A., Medovnik, A.V., and Oks, E.M., Instrum. Exp. Tech., 2011, vol. 54, p. 226.
Oks, E.M., Istochniki elektronov s plazmennym katodom: fizika, tekhnika, primeneniya (Electron Sources with a Plasma Cathode: Physics, Technique, Applications), Tomsk: NTL, 2005.
Anders, A., Brown, I.G., McGill, R.A., and Dickinson, M.R., J. Phys. D: Appl. Phys., 1998, vol. 31, p. 584.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Kazakov, V.A. Burdovitsin, A.V. Medovnik, E.M. Oks, 2013, published in Pribory i Tekhnika Eksperimenta, 2013, No. 6, pp. 50–53.
Rights and permissions
About this article
Cite this article
Kazakov, A.V., Burdovitsin, V.A., Medovnik, A.V. et al. A forevacuum pulse arc-discharge-based plasma electron source. Instrum Exp Tech 56, 680–683 (2013). https://doi.org/10.1134/S0020441213060043
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020441213060043