Abstract
It is proposed to use induction cells with cores wound by a thin tape made of an iron-based amorphous alloy in the linear induction accelerator for flash radiography. The comparison of pulse magnetization characteristics of the toroidal cores made with layer insulation and without it is given. The results of switching on of the injector based on the manufactured cores are presented.
Similar content being viewed by others
References
Smith, C.H., Turman, B.N., and Harjes, H.C., IEEE Trans. Electron Devices, 1991, vol. 38, no. 4, p. 750.
Mamaev, G., Bolotin I., Ctcherbakov A., et al., Proc. 1997 Particle Accelerator Conf., Vancouver, Canada, 1997, p. 1313.
Molvik, A.W. and Faltens, A., Physical Review Special Topics, Accelerators and Beams, 2002, vol. 5, no. 8, p. 080401.
Bolotin, I., Mamaev, G., Mamaev, S., et al., Proc. 1999 Particle Accelerator Conf., New York, 1999, p. 1482.
Nathasingh, D.M., Smith, C.H., and Datta, A., IEEE Trans. Magnetics, 1984, vol. MAG-20, no. 5, p. 1332.
Akimov, A.V., Bak, P.A., Korepanov, A.A., et al., Vestnik Nov. Gos. Univ., Ser. Fiz., 2008, vol. 3, no. 4, p. 68.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Akimov, P.V. Logachov, A.A. Korepanov, F.V. Averin, O.V. Savinova, G.L. Mamaev, S.L. Mamaev, 2012, published in Pribory i Tekhnika Eksperimenta, 2012, No. 2, pp. 129–134.
Rights and permissions
About this article
Cite this article
Akimov, A.V., Logachov, P.V., Korepanov, A.A. et al. Magnetic cores made of an amorphous tape for the induction accelerator. Instrum Exp Tech 55, 268–273 (2012). https://doi.org/10.1134/S0020441212010253
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020441212010253