Abstract
Methods and results of physical and mathematical simulation of fracture processes at various scale-structural levels and under various (including extreme) loading conditions are given. The kinetics of cracks and their trajectories in the surface layers of material under conditions of cyclic loading, friction of rolling and sliding, indentation, and shearing of the sample edge are analyzed. The prospects of combined experimental and numerical simulation methods in the study of fracture processes are shown. A criterion for averaged stresses at the crack tip is proposed for predicting the trajectory of a crack under mixed loading conditions.
Similar content being viewed by others
REFERENCES
Matvienko, Yu.G., Tendentsii nelineinoi mekhaniki razrusheniya v problemakh mashinostroeniya (Trends in Nonlinear Fracture Mechanics in Mechanical Engineering), Moscow: Inst. Komp’yut. Issled., 2015.
Matvienko, Yu.G. Modeli i kriterii mekhaniki razrusheniya (Models and Criteria of Fracture Mechanics), Moscow: Fizmatlit, 2006.
Matvienko, Yu.G. and Kulakov, A.V., Neural network modeling of the short fatigue crack growth, Zavod. Lab., Diagn. Mater., 2008, vol. 74, no. 12, pp. 41–48.
Matvienko, Yu.G., Maximum average tangential stress criterion for prediction of the crack path, Int. J. Fract., 2012, vol. 176, pp. 113–118.
Matvienko, Yu.G., Nonsingular T-stresses in problems of two-parameter fracture mechanics, Zavod. Lab., Diagn. Mater., 2012, vol. 78, no. 2, pp. 51–58.
Matvienko, Yu.G., Modeling and fracture criteria in current problems of strength, survivability and machine safety, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 3, pp. 242–249.
Matvienko, Yu.G., Two-parameter fracture mechanics in contemporary strength problems, J. Mach. Manuf. Reliab., 2013, vol. 42, no. 5, pp. 374–381.
Matvienko, Yu.G., The effect of out-of-plane constraint in terms of the T-stress in connection with specimen thickness, Theor. Appl. Fract. Mech., 2015, vol. 80, pp. 49–56.
Semenova, M.M. and Matvienko, Yu.G., Prediction of surface crack path under sliding friction, Mashinostr. Inzh. Obraz., 2014, no. 2, pp. 47–52.
Matvienko, Yu.G. and Semenova, M.M., The concept of the average stress in the fracture process zone for the search of the crack path, Fratt. Integr. Strutt., 2015, vol. 34, pp. 276–281.
Zafošnik, B., Ren, Z., Flašker, J., and Mishuris, G., Modeling of surface crack growth under lubricated rolling-sliding contact loading, Int. J. Fract., 2005, vol. 134, pp. 127–149.
Pluvinage, G. and Capelle, J., On characteristic lengths used in notch fracture mechanics, Int. J. Fract., 2014, vol. 187, pp. 187–197.
Matvienko, Yu.G. and Bubnov, M.A., Contact interaction and fracture of the surface layer during rolling friction and wedging, J. Mach. Manuf. Reliab., 2009, vol. 38, no. 4, pp. 349–353.
Matvienko, Yu.G., Bubnov, M.A., and Myagkov, K.A., Spectral characteristics of crack-like defects in the condition of rolling friction, J. Mach. Manuf. Reliab., 2015, vol. 44, no. 5, pp. 445–448.
Batanova, O.A., Gogotsi, G.A., and Matvienko, Yu.G., Numerical analysis of the results in edge chipping tests, Zavod. Lab., Diagn. Mater., 2011, vol. 77, no. 7, pp. 54–57.
Batanova, O.A., Gogotsi, G.A., and Matvienko, Yu.G., Numerical modeling edge chip-ping tests of ceramics, Eng. Fract. Mech., 2014, vol. 132, pp. 38–47.
Batanova, O.A. and Matvienko, Yu.G., Crack initiation in edge chipping and indentation of brittle materials, Fiz. Mezomekh., 2015, vol. 18, no. 2, pp. 22–36.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Sh. Galyaltdinov
Rights and permissions
About this article
Cite this article
Matvienko, Y.G. Simulation of Kinetics of Crack Development in Surface Layers of Material. Inorg Mater 54, 1511–1516 (2018). https://doi.org/10.1134/S0020168518150104
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168518150104