Abstract—
The thermokinetic behavior of a polycarbosilane- and oligovinylsilazane-based ceramic-forming binder during curing and pyrolysis has been studied by differential scanning calorimetry and infrared spectroscopy. The rate equations for the curing and pyrolysis reactions have been derived under the assumption that the reaction rate, weight loss, and heat flux are proportional to the heating rate. Curing and pyrolysis have been shown to involve at least two competing processes. Based on the kinetic models obtained, we have proposed heat treatment conditions that ensure a constant rate of the curing and pyrolysis reactions.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
Kablov, E.N., Innovative solutions at the All-Russia Research Institute of Aviation Materials Federal State Unitary Enterprise (RF State Scientific Center) aimed at implementing “strategic directions in the development of materials and materials processing technologies up to 2030,” Aviats. Mater. Tekhnol., 2015, no. 1 (34), pp. 3–33.
Kablov, E.N., Shchetanov, B.V., Grashchenkov, D.V., Shavnev, A.A., and Nyafkin, A.N., Al–SiC based metal-matrix composite materials, Aviats. Mater. Tekhnol., 2012, no. S, pp. 373–380.
Wuchina, E., Opila, E., Opeka, M., Fahrenholtz, W., and Talmy, I., UHTCs: ultra-high temperature ceramic materials for extreme environment applications, Electrochem. Soc. Interfaces, 2007, vol. 16, no. 4, pp. 30–36.
Kablov, E.N., Grashchenkov, D.V., Isaeva, N.V., and Solntsev, S.St., Promising high-temperature ceramic composite materials, Ross. Khim. Zh., 2010, vol. 54, no. 1, pp. 20–24.
Solntsev, St.S., Denisova, V.S., and Rozenenkova, V.A., Reaction curing: a new direction in the technology of high-temperature composite coatings and materials, Aviats. Mater. Tekhnol., 2017, no. S, pp. 329–343.
Valueva, M.I., Zelenina, I.V., Khaskov, M.A., and Gulyaev, A.I., Preparation of carbon fiber for applying interphase coating for ceramic-matrix composite materials, Tr. Vseross. Inst. Aviats. Mater., 2017, no. 10, paper 09. http://viam-works.ru. Cited November 11, 2017.
Colombow, P., Mera, G., Riedel, R., and Soraru, G.D., Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics, J. Am. Ceram. Soc., 2010, vol. 93, no. 7, pp. 1805–1837.
Gupta, R.K., Mishra, R., Mukhopadhyay, K., Tiwari, R.K., Ranjan, A., and Saxena, A.K., A new technique for coating silicon carbide onto carbon nanotubes using a polycarbosilane precursor, Silicon, 2009, vol. 1, pp. 125–129.
Shestakov, A.M., Shvets, N.I., Khaskov, M.A., Ponomarenko, S.A., and Minakov, V.T., Compounds based on polycarbosilane and bismaleimide as precursors of ceramic-matrix composites, Russ. J. Appl. Chem., 2015, vol. 88, no. 9, pp. 1481–1488.
Praderea, C. and Sauderb, C., Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300–2500 K), Carbon, 2008, vol. 46, pp. 1874–1884.
Moukhina, E., Determination of kinetic mechanisms for reactions measured with thermoanalytical instruments, J. Therm. Anal. Calorim., 2012, vol. 109, pp. 1203–1214.
Kablov, E.N., Minakov, V.T., Gunyaev, G.M., Sorina, T.G., Strebkova, T.S., Shvets, N.I., Antonova, S.V., Solntsev, S.S., Rozenenkova, V.A., and Mironova, N.A., RF Patent 2 190 582, Byull. Izobret., 2002, no. 28.
Nefedov, N.I., Khaskov, M.A., Petrova, A.P., and Buznik, V.M., Thermal properties of fluorinated paraffins and related hydrophobic coatings, Tr. Vseross. Inst. Aviats. Mater., 2017, no. 2, paper 11. http://viam-works.ru. Cited February 19, 2018.
Pretsch, E., Bülmann, P., and Affolter, C., Structure Determination of Organic Compounds: Tables of Spectral Data, Berlin: Springer, 2000.
Schiavon, M.A., Sorar, G.D., and Yoshida, I.V.P., Synthesis of a polycyclic silazane network and its evolution to silicon carbonitride glass, J. Non-Cryst. Solids, 2002, vol. 304, pp. 76–83.
Ly, H.Q., Taylor, R., Day, R.J., and Heatley, F., Conversion of polycarbosilane (PCS) to SiC-based ceramic. Part 1. Characterisation of PCS and curing products, J. Mater. Sci., 2001, vol. 36, pp. 4037–4043.
Li, Y.-L., Kroke, E., Riedel, R., Fasel, C., Gervais, C., and Babonneau, F., Thermal cross-linking and pyrolytic conversion of poly(ureamethylvinyl)silazanes to silicon-based ceramics, Appl. Organomet. Chem., 2001, vol. 15, no. 10, pp. 820–832.
Energii razryva khimicheskikh svyazei. Potentsialy ionizatsii i srodstvo k elektronu (Bond Breaking Energies, Ionization Potentials, and Electron Affinities), Gurvich, L.V., Ed., Moscow: Nauka, 1974.
Tu, H.-E., Chen, Y.-H., and Leu, J., Low-k SiCxNy films prepared by plasma-enhanced chemical vapor deposition using 1,3,5-trimethyl-1,3,5-trivinylcyclotrisilazane precursor, J. Electrochem. Soc., 2012, vol. 159, no. 5, pp. G56–G61.
Khaskov, M.A., Extension of the time-temperature-transformation diagram taking into account thermal properties of components for optimizing the curing of polymer matrix composites, Russ. J. Appl. Chem., 2016, vol. 89, no. 4, pp. 622–630.
ACKNOWLEDGMENTS
This work was supported by the Russian Foundation for Basic Research, grant no. 17-03-01163.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Tsarev
Rights and permissions
About this article
Cite this article
Khaskov, M.A., Davydova, E.A., Valueva, M.I. et al. A Thermokinetic Study of a Polycarbosilane- and Oligovinylsilazane-Based Ceramic-Forming Composition. Inorg Mater 54, 1162–1167 (2018). https://doi.org/10.1134/S0020168518110080
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168518110080