Abstract
Multiwalled carbon nanotubes (MWCNTs) have been coated with silicon carbide (SiC) using polycarbosilane as precursor in order to improve their thermo oxidative stability. The polycarbosilane coated MWCNTs were heated to ~1300°C under an inert atmosphere to generate the SiC coating. X-ray diffraction, energy dispersive X-ray analysis and scanning electron microscopy have confirmed the formation of SiC on the MWCNTs. The retention of the tubular structure of the MWCNTs has been confirmed by transmission electron microscopy. Thermogravimetric analysis has been performed to evaluate the thermo oxidative stabilities of coated and virgin MWCNTs. Sonication studies have shown that the mechanical strength of the MWCNTs was increased after coating with SiC.
Similar content being viewed by others
References
Yu MF, Files BS, Arepalli S, Ruoff RS (2000) Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys Rev Lett 84(24):5552–5555
Walters DA, Ericson LM, Casavant MJ, Liu J, Colbert DT, Smith KA et al (1999) Elastic strain of freely suspended single-wall carbon nanotube ropes. Appl Phys Lett 74(25):3803–3805
Kim P, Shi L, Majumdar A, McEuen PL (2001) Thermal transport measurements of individual multiwalled nanotubes. Phys Rev Lett 87(21):215502–215505
Tang ZK, Zhang L, Wang N, Zhang XX, Wen GH, Li GD et al (2001) Superconductivity in 4 angstrom single-walled carbon nanotubes. Science 292(5526):2462–2465
Liang W, Bockrath M, Bozovic D, Hafner JH, Tinkham M, Park H (2001) Fabry-Perot interference in a nanotube electron waveguide. Nature 411(6838):665–669
Frank S, Poncharal P, Wang ZL, deHeer WA (1998) Carbon nanotube quantum resistors. Science 280(5370):1744–1746
Baughman RH, Zakhidov AA, deHeer WA (2002) Carbon nanotubes-the route toward applications. Science 297(5582):787–792
Biercuk MJ, Llaguno MC, Radosavljevic M, Hyun JK, Johnson AT (2002) Carbon nanotube composites for thermal management. Appl Phys Lett 80(15):2767–2769
Qian D, Dickey EC, Andrews R, Rantell T (2000) Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites. Appl Phys Lett 76(20):2868–2870
Morisada Y, Miyamoto Y (2004) SiC-coated carbon nanotubes and their application as reinforcements for cemented carbides. Mat Sci Eng A381(1–2):57–61
Shukla SK, Tiwari RK, Ranjan A, Saxena AK, Mathur GN (2004) Some thermal studies of polysilanes and polycarbosilanes. Thermochimica Acta 424(1–2):209–217
Ding RG, Lu GQ, Yan ZF, Wilson MA (2001) Recent advances in the preparation and utilization of carbon nanotubes for hydrogen storage. J Nanosci Nanotechnol 1(1):7–29
Mukhopadhyay K, Lal D, Ram K, Mathur GN (2004) Synthesis of 2D quasi aligned CNT bundles by catalytic chemical vapour deposition (CCVD) method-an inside story. Smart Mat Struc 13:N5
Okamura K, Shimoo T, Suzuyak SK (2006) SiC based ceramic fibers prepared via organic-to-inorganic conversion process - a review. J Ceram Soc Japan 114(6):445–454
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gupta, R.K., Mishra, R., Mukhopadhyay, K. et al. A New Technique for Coating Silicon Carbide Onto Carbon Nanotubes Using a Polycarbosilane Precursor. Silicon 1, 125–129 (2009). https://doi.org/10.1007/s12633-009-9016-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-009-9016-0