Abstract
Highly porous ceramics based on a niobium-tantalum carbide solid solution of composition Nb0.3Ta0.7C, with a density of 2.70 ± 0.02 g/cm3, total porosity of 77%, and compressive strength in the range 1.5–2.3 MPa have been produced at a temperature of 1400°C by a polymer process using low hydrated hydroxide of niobium and tantalum, with the general formulaNb0.3Ta0.7O0.5–2.0(OH)4–1 · 1.5–3.0H2O, as a filler of a polymer material.
Similar content being viewed by others
References
Kosolapova, T.Ya., Karbidy (Carbides), Moscow: Metallurgiya, 1968.
Simonov-Emel’yanov, I.D. and Shembel’, N.L., Targeted synthesis of carbon-based and refractory carbide materials with controlled porosity in products from polymer-matrix composite materials, Plast. Massy, 2010, no. 9, pp. 10–18.
Cherkashenko, V.M., Nazarova, S.Z., Gusev, A.I., and Ivanovskii, A.L., Electronic structure, chemical bonding, and properties of MxM′yCz double carbides in crystalline and molecular states studied by X-ray emission spectrometry, electron spectroscopy, and quantumchemical simulation, Zh. Strukt. Khim., 2001, vol. 42, no. 6, pp. 1195–1221.
Samsonov, G.V., Upadkhaya, G.Sh., and Neshpor, V.S., Fizicheskoe materialovedenie karbidov (Physical Metallurgy of Carbide Materials), Kiev: Naukova Dumka, 1974.
Kuznetsov, N.T., Sevast’yanov, V.G., Simonenko, E.P., Ignatov, N.A., Simonenko, N.P., and Ezhov, Yu.S., RF Patent 2 333 888, Byull. Izobret., 2008, no. 26.
Sevast’yanov, V.G., Simonenko, E.P., Ignatov, N.A., Ezhov, Yu.S., and Kuznetsov, N.T., Low temperature synthesis of TaC through transparent tantalum–carbon containing gel, Inorg. Mater., 2010, vol. 46, no. 5, pp. 495–500.
Simonenko, E.P., Ignatov, N.A., Simonenko, N.P., Ezhov, Yu.S., Sevastyanov, V.G., and Kuznetsov, N.T., Synthesis of highly dispersed super refractory tantalum–zirconium carbide Ta4ZrC5 and tantalum–hafnium carbide Ta4HfC5 via sol–gel technology, Russ. J. Inorg. Chem., 2011, vol. 56, no. 11, pp. 1681–1687.
Simonenko, E.P., Simonenko, N.P., Ezhov, Yu.S., Sevast’yanov, V.G., and Kuznetsov, N.T., Synthesis of nanocrystalline tantalum zirconium carbide, Yad. Fiz. Inzh., 2014, vol. 5, no. 4, pp. 337–345.
Shembel’, N.L., Simonov-Emel’yanov, I.D., Kuleznev, V.N., Afonin, M.M., and Zaitsev, V.I., RF Patent 2 087 499, Byull. Izobret., 1997, no. 23.
Nikishina, E.E., Lebedeva, E.N., and Drobot, D.V., Niobiumand tantalum-containing oxide materials: synthesis, properties, and application, Inorg. Mater, 2012, vol. 48, no. 13, pp. 1243–1260.
Simonov-Emel’yanov, I.D., Shembel’, N.L., Drobot, D.V., Lebedeva, E.N., Nikishina, E.E., et al., RF Patent 2 537 595, Byull. Izobret., 2015, no. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.D. Simonov-Emel’yanov, N.L. Shembel’, E.E. Nikishina, E.N. Lebedeva, A.V. Nikitina, D.V. Drobot, E.P. Simonenko, N.P. Simonenko, V.G. Sevast’yanov, N.T. Kuznetsov, 2015, published in Neorganicheskie Materialy, 2015, Vol. 51, No. 10, pp. 1148–1154.
Rights and permissions
About this article
Cite this article
Simonov-Emel’yanov, I.D., Shembel’, N.L., Nikishina, E.E. et al. Preparation of highly porous Nb x Ta1–x C ceramics from polymer-matrix composite materials based on a phenol-formaldehyde binder and low hydrated hydroxide of niobium and tantalum. Inorg Mater 51, 1066–1072 (2015). https://doi.org/10.1134/S0020168515100143
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168515100143