References
Tabor, D., The Hardness of Metals, Oxford University Press, London (1951).
Williams, S.R., Hardness and Hardness Measurements, ASM, Cleveland, OH (1942).
Ponton, C.B. and Rowlings, R.D., “Vickers Indentation Fracture Toughness Test Part I: Review of Literature and Formulation of Standardized Indentation Toughness Equations,” Mat. Sci. and Tech., 5, 865–872 (1989).
Subhash, G., “The Constitutive Behavior of Refractory Metals as a Function of Strain Rate,” JOM, 47 (5), 55–58 (1995).
Meyers, M.A., Dynamic Behavior of Materials, John Wiley & Sons, Inc., New York (1994).
Ravichandran, G. and Subhash, G., “A Micromechanical Model for the High Strain Rate Behavior of Ceramics,” Int. Solids Struct., 32 (17/18), 2627–2646 (1995).
Raiser, G. and Clifton, R.J., “High Strain Rate Deformation and Damage in Ceramic Materials,” J. Eng. Mat. and Tech., 115 (3), 292–299 (1993).
Lankford, J. and Blanchard, C.R., “Dynamic Compressive Fracture in Fiber-reinforced Ceramic Matrix Composites,” Mat. Sci. and Eng., 107A, 261–268 (1989).
Tabor, D., “A Simple Theory of Static and Dynamic Hardness,” Proc. Roy. Soc. of London A, 192, 247–274 (1948).
Yoshioka, M. and Naoto, Y., “Dynamic Process of Vickers Indentation Made on Glass Surfaces,” J. Appl. Phys., 78 (5), 3431–3437 (1995).
Nemat-Nasser, S., Isaacs, J.B., and Starrett, J.E., “Hopkinson Techniques for Dynamic Recovery Experiments,” Proc. Roy. Soc. of London A, 435, 371–391 (1991).
“E 92-82: Standard Test Method for Vickers Hardness of Metallic Materials,” 1996 Annual Book of ASTM Standards, Sec. 03, Vol. 01, ASTM, Easton, MD (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Koeppel, B.J., Subhash, G. An experimental technique to investigate the dynamic indentation hardness of materials. Exp Tech 21, 16–18 (1997). https://doi.org/10.1111/j.1747-1567.1997.tb00517.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.1997.tb00517.x