Abstract
We consider structured environments modeled by bosonic quantum networks and investigate the probing of their spectral density, structure and topology. We demonstrate how to engineer a desired spectral density by changing the network structure. Our results show that the spectral density can be very accurately detected via a locally immersed quantum probe for virtually any network configuration. Moreover, we show how the entire network structure can be reconstructed by using a single quantum probe. We illustrate our findings presenting examples of spectral densities and topology probing for networks of genuine complexity.
Similar content being viewed by others
Introduction
Recently, the study of dissipative or decohering environments as engineered reservoirs has received considerable attention. Reservoir engineering aims at turning the environment from an enemy to an ally by modifying the properties of the unavoidable noise in order to optimally preserve quantum features such as coherence or entanglement. It is nowadays generally recognised that the initial belief of the environment as the major enemy of all quantum technologies must be reconsidered. Theoretical and experimental results show indeed that the interaction with the environment, when suitably tailored, can be used to generate or protect quantum resources and holds great potential as a method to increase the feasibility and scale of quantum applications1,2,3,4,5.
On the other hand, the extraction of relevant information about a complex quantum system by means of a localised quantum probe has also enjoyed growing attention. Besides being generally a less invasive technique, this approach might significantly reduce the resources and effort needed to detect, e.g., the complex system’s temperature6, communities7, state8 or dimensionality9.
In this work we apply concepts and techniques of open quantum systems theory to investigate complex bosonic quantum networks, thus bridging the gap between these two fields. More precisely, we consider a bosonic probe system locally immersed in the network and investigate the control and probing of the network spectral density J(ω), a quantity embedding both the environment structure and the interaction between system and environment10,11. Notably, we demonstrate that not only J(ω) but the entire structure and topology of the network can be obtained by quantum probing and we give a detailed method to accomplish this task. We consider the probe as an open quantum system whose dynamics arises from the interaction with a nontrivial quantum environment.
The study of the spectral density of bosonic quantum systems has been addressed before only for the simple cases of either non-interacting oscillators or oscillator chains12,13,14,15,16. This leaves the determination and especially control of spectral densities of complex quantum networks a largely unexplored area. Previous investigations include using the Landau-Zener transition probabilities of a qubit to detect global features of J(ω)17, the center of mass motion of a michromechanical oscillator in the high temperature limit18, the Stokes shift response function of a spin system immersed in a proteomic scaffold and in contact to a solvent19 and the statistics of photons scattering from an open quantum system coupled to a zero temperature reservoir20. In comparison, our probing scheme has the advantage of being local and of making no assumptions about the temperature or the structure of the environment. Networks of spins as well as bosonic/fermionic networks have been also investigated in refs 21, 22, 23 in the context of structure probing. However, these methods require a known topology and full state tomography to detect the coupling and local field strengths21,22, or can probabilistically reveal an unknown topology but are limited to small networks only23. On the contrary, our approach is not based on state tomography, requires minimal post-processing of measured data, is in principle deterministic and can be used for complex quantum networks having hundreds of nodes.
After introducing the model in detail, we calculate spectral densities of quantum networks of genuine complexity, e.g., small-world24 and ErdHös-Rényi25 configurations and show how to control some features of their structure, such as the number of gaps. Numerical simulations based on exact diagonalization show that the scheme is very accurate for virtually any network configuration and temperature. While probing is done in the weak coupling regime, the detected J(ω) can be scaled to any coupling strength once its shape is known. Finally, we prove that the whole structure and topology of the network can be obtained with a single quantum probe by scanning over the network nodes with single and pair-node couplings.
Results
The microscopic model
The probe is a quantum harmonic oscillator of unit mass coupled linearly with coupling strength k to a node in the quantum network. The probe Hamiltonian, in units of , is
, where pS and qS are the probe momentum and position operators and ωS is the probe frequency. The network plays the role of a finite environment in a thermal state of temperature T and consists of N quantum harmonic oscillators of unit mass coupled via springlike couplings, each having the same bare frequency ω0. We assume that the probe and the network are initially uncorrelated.
The Hamiltonian of a generic oscillator network can be given as , where
and
are the vectors of momentum and position operators and the N × N matrix A has elements
, where ωi is the effective frequency of oscillator i and hij is the strength of the springlike coupling between oscillators i and j. Matrix A is the adjacency matrix (including diagonal terms) of the network and as such completely characterizes it. For any network configuration, the network Hamiltonian is quadratic in position and momentum and can therefore be diagonalized with an orthogonal transformation K as KTAK = D, where the diagonal matrix D has elements
, where
are the eigenfrequencies of the network.
By defining new variables P = KTp and Q = KTq, the diagonalization allows us to move into an equivalent eigenmode picture of independent oscillators, each interacting with the probe with a coupling strength directly proportional to k. The network Hamiltonian in the eigenmode picture is of the form , where Pi and Qi are the position and momentum operators of the network eigenmodes which have frequencies Ωi. The Hamiltonian of the total system is
, where HI is the interaction Hamiltonian. In the eigenmode picture it is of the form
where the dimensionless constants gi describe the coupling strengths between the probe and the eigenmodes and are just elements of a row of K. This can be seen by writing the position operator of the node directly coupled to the probe in terms of Qi and identifying the weights given by the elements of K with gi. Further details about oscillator network diagonalization can be found in, e.g., Appendix A of reference13 by Vasile et al.
The reduced dynamics can be described exactly by a generalized quantum Langevin equation. In particular, the dissipation and memory effects are accounted for by the damping kernel . The spectral density of the environmental couplings is defined as
![](http://media.springernature.com/lw233/springer-static/image/art%3A10.1038%2Fsrep26861/MediaObjects/41598_2016_Article_BFsrep26861_Equ1_HTML.gif)
The spectral density and the damping kernel are related as
![](http://media.springernature.com/lw253/springer-static/image/art%3A10.1038%2Fsrep26861/MediaObjects/41598_2016_Article_BFsrep26861_Equ2_HTML.gif)
For finite networks, the interaction time between the probe and the network controls the crossover between smooth and discrete spectral densities. For tmax in eq. (2) smaller than a characteristic recurrence time τf, proportional to the size of the network, the spectral density will be a smooth function of frequency. In this regime, finite size effects are avoided and reduced dynamics correspond to a probe interacting with a continuum of frequencies, similar to that calculated from eq. (1) in the limit N → ∞. In tmax > τf regime, finite size effects start to play a prominent role.
In what follows, eq. (2) will be used to calculate J(ω) throughout. We will work in the continuum regime when probing and engineering the spectral density, but it will be seen that when probing the topology, one must work in the discrete regime instead.
Engineering of the spectral density
We consider several different network configurations and calculate the respective spectral densities. By going beyond simple chain networks a very rich variety of different spectral densities arises. Schematics of network configurations considered in this work are presented in Fig. 1 and the corresponding spectral densities are presented in Fig. 2.
Schematics of the network configurations.
The white circle is the probe, coupled to a single node with a coupling strength k. Couplings between network oscillators are either strong (solid line) or weak (dashed line). Example (A) is a periodical chain where every third coupling strength is weaker. Example (B) is a homogeneous chain with one short-cut, with all coupling strengths equal. Example (C) is a small-world network constructed from a chain by adding several weak shortcuts and example (D) is an Erdo˝s-Rényi random network.
The spectral densities (solid line) of the configurations presented in Fig. 1 for a system-network dimensionless coupling strength k = 0.01.
All networks have N = 200 nodes with a frequency ω0 = 0.25. The spectral densities are probed (circles) with a constant interaction time t = 500. Each circle corresponds to a different value of the system frequency, which is varied to sample the underlying J(ω). The system is initially in vacuum state and the network temperature is T = 5. In the periodic chain (A), strong and weak couplings between network oscillators are 0.1 and 0.06, respectively. In the chain with a shortcut (B), all network couplings are set to 0.1. In the small-world network (C), the strong and weak couplings are 0.1 and 0.003, respectively. The random network (D) has equal couplings set to 0.05.
A simple homogeneous chain with springlike couplings has a single band. The lowest frequency where J(ω) is non-vanishing coincides with ω0 and the highest frequency increases as the stiffness of the chain is increased, while the magnitude is directly proportional to k2. Band gaps can be created by periodically tuning some of the couplings in the chain to be weaker, which splits the single band to two or more bands13. We have checked that the number of bands coincides with the number of network oscillators in a strongly coupled group: an example is the trimer chain in Fig. 1A where several groups of three oscillators are weakly coupled as a chain, resulting in three bands as in Fig. 2A. A bigger difference between strong and weak network couplings leads to wider bandgaps.
Instead of tuning many couplings periodically, a similar effect can be achieved by adding just one additional link, or a shortcut, to a homogeneous chain, as in Fig. 2B. This leads to a structured J(ω) with spikes. The amount of spikes coincides with the number of oscillators before the shortcut, while the depth of the pseudogaps between the spikes depends on the coupling strength of the shortcut with stronger shortcut leading to deeper pseudogaps. An example with three spikes is shown in Fig. 2B.
We also considered a small-world network and a random network. The former has a single band with a lot of fine structure. On the other hand, the random network produces highly structured spectral densities that can change completely from node to node. In the example presented in Fig. 2D, the probe is coupled to a node with high connectivity, resulting in a J(ω) with a wide frequency range. Coupling to a node with low connectivity instead might result in a very narrow J(ω).
The ability to controllably engineer a wide variety of spectral densities highlights that complex quantum networks are ideal testbeds for fundamental studies on open quantum systems where, especially in the non-Markovian regime, a number of fundamental questions remain still unanswered.
Probing of the spectral density
We consider the case of a network with an unknown configuration but known temperature and show that the local value of the spectral density can be probed by measuring the expectation value of the probe number operator , where a† and a are the system creation and annihilation operators. This is proportional to the average energy of the probe. It has been experimentally measured for specific systems such as trapped ions; see, e.g.26, for a review. In the examples, we calculate the evolution of
by diagonalizing the network, solving the Heisenberg equations of motion in eigenmode picture and returning to old variables.
Provided that the network size is not too small, one can easily check by comparison with the exact numerics that, for weak probe-network couplings and for times greater than the initial non-Markovian time in the continuum regime tmax < τf, the mean value of the probe number operator is well approximated by the expression , with
and where
is the thermal average boson number, T being the temperature of the environment, in units of the Boltzman constant kB27. The spectral density can be obtained by probing the network scanning over different frequencies ωS via the formula
![](http://media.springernature.com/lw203/springer-static/image/art%3A10.1038%2Fsrep26861/MediaObjects/41598_2016_Article_BFsrep26861_Equ3_HTML.gif)
where and t a suitable interaction time. We stress once more that t can be chosen within a wide interval, i.e. it should be in the continuum regime and longer than the initial non-Markovian time. A rough estimate of the non-Markovian correlation time τR is given by
, where ωmax is the largest frequency where the spectral density is non-vanishing: for weak couplings it is typically very short.
In Fig. 2 we test the effectiveness of the probing scheme for the spectral densities of the networks presented in Fig. 1 by calculating the r.h.s. of eq. (3) with exact numerics for many different values of ωS. All quantities, namely coupling strengths, times and temperatures, are given in arbitrary units as referred to a fixed frequency unit. The probing scheme works well for all four examples. In particular it is seen that while the rich structure of Fig. 1C,D would require dense sampling to resolve, the samples themselves are accurate. Beyond the examples presented here, we checked the accuracy of the probing for a wide range of spectral densities and parameter ranges and found similar results. We also tested probing with different states of same energy, finding no differences.
Probing of the network topology
The spectral density alone does not allow one to determine all properties of the underlying quantum network. It can be shown14,15,16 that any spectral density that can be produced by a diagonal Hamiltonian can be reproduced by a linear harmonic chain with nearest-neighbor couplings only. Since any network configuration, no matter how complex, can be presented in the eigenmode picture with a diagonal Hamiltonian, this means that the network shape is never unique to a given spectral density.
In the following we present a general approach allowing for the full characterisation of the network structure and topology. Remarkably, our detection method only relies on the use of a single quantum probe and on the measure of the mean excitation number at a certain time within a broad characteristic time interval. However, in order to retrieve the complete information on the network we need to (i) couple the probe to more than a single node; (ii) measure the excitation number in the discrete regime
. The latter point is related to the fact that short-time reduced dynamics are not determined by the entire network28. This technique is, inevitably, much more expensive than the probing of the spectral density. However, to the best of our knowledge, it is the first demonstration that the full information on the network can be extracted by means of a single quantum probe.
We will assume to have some preliminary knowledge on the size of the network, i.e., on the number of nodes N. As explained when introducing the microscopic model, a generic oscillator network is determined by matrix A, which provides the oscillator frequencies as well as the structure of the network. We will show how to reconstruct both the matrix D and K from which matrix A can be obtained via A = KDKT.
To construct D, one needs to detect the eigenfrequencies Ωi, which can be done using an approach similar to J(ω) probing. As explained before, for sufficiently short interaction times, the detected J(ω), given by eq. (3), is a smooth function of frequency as if the network had a continuum of eigenfrequencies. With longer interaction times the discrete spectrum emerges. This is essentially caused by differences in the heat flow between the probe and the network in the long interaction time regime, leading to a significantly larger values of when ωS is close to an eigenfrequency. The sensitivity of the eigenfrequency detection depends on coupling strength k, with weaker values leading to more accurate results. We stress that this behaviour is universal to all finite networks. An example is shown in Fig. 3, which also demonstrates the accuracy of the eigenfrequency detection when k is weak. Typically eigenfrequency detection is the most robust part of topology probing.
An example of eigenfrequency probing with a homogeneous chain.
In (A), the detected spectral density is shown for , where t is the interaction time and τf the recurrence time. The result is a smooth function of frequency. In (B), detected spectral density is shown for
. The discrete spectrum emerges and reveals the eigenfrequencies marked by dots. In (C), the evolution of
is compared for ωS at an eigenfrequency (squares) and just 2% off (circles). The difference is clear and causes the emergence of discrete spectrum in (B). Also depicted is the time
, after which the energy flow is reversed even for a system at an eigenfrequency. The chain, initially in vacuum state, was 50 oscillators long, with bare frequency ω0 = 0.25 and coupling constant g = 0.1, with a system-network coupling strength k = 0.0025. The probe was initially in squeezed vacuum with squeezing parameter r = 1 and phase space angle
.
While Ωi do not depend on the node the probe is coupled to, the probe must interact with all eigenmodes to detect all Ωi, which is not always the case. On the other hand, the couplings to eigenmodes can be changed by coupling the probe to different node(s), which allows one in principle to always detect all of them. If Ωi are all distinct, as is the case for generic networks, knowing N gives the number of Ωi and consequently one knows when all eigenfrequencies have been found.
The elements of K are detected in two steps. First step is to detect the modulus of K. The coupling strengths to eigenmodes are related to the rows of matrix K as , with gi describing the coupling between the probe and the eigenmode i and j the index of the node the probe is coupled to. In other words, each node j corresponds to a different HI and therefore, different set of coupling strengths. Thus, the elements Kji can be obtained by probing sequentially each node j of the network at the eigenfrequencies Ωi, i.e. evaluating decay of
at ωS = Ωi and using eq. (3) to determine J(Ωi). From eq. (1), it can be seen that
. Keeping in mind that we wish to have a value for each of the gi, we approximate the integral with a finite sum using J(Ωi) and Ωi. By identifying the terms in the summations on both sides and solving for gi we arrive at
, where
is the sampling interval.
Second step is to detect the signs of the elements of K by probing pairs of nodes in the same way as previously, e.g. nodes 1 and 2. In this way one detects (with probe frequency Ωi) and, by comparing it to the values obtained by the single node probing, namely
, one can reveal whether the elements have same or opposite sign. In principle, the choice for the tolerance value used here can create some ambiguity, but this can be done after probing is over and the final result remains mostly unchanged for a wide range of choices. Running over the eigenfrequencies Ωi and running over N − 1 pairs of nodes completes the relative signs of the complete matrix. The knowledge of relative signs is sufficient since the adjacency matrix A = KDKT is invariant under a global sign change of K.
Even small errors in the previous steps easily destroy the orthogonality of K, leading to large errors in the reconstruction to the overall network structure and topology. To counter this, the orthogonality needs to be enforced. This is straightforward to do since it can be shown29 that any matrix M which has a singular value decomposition M = WNV† has a unique nearest orthonormal matrix and it is WV†.
To summarize, one first needs to detect the eigenfrequencies . This determines matrix D. Then, all N nodes are probed at eigenfrequencies individually, followed by the probing of N − 1 pairs of nodes, which determines matrix K up to a global sign which can be arbitrary. The nearest orthonormal matrix to detected K is calculated and used to calculate the adjacency matrix from A = KDKT. The method above can be used for a full reconstruction of a large oscillator network of an unknown topology. As an example we show in Fig. 4 a comparison between the original and reconstructed adjacency matrices of a small-world network similar to that of Fig. 1C. The accuracy of the reconstruction depends mostly on the magnitude of the adjacency matrix elements and the used interaction time t: accuracy improves for larger values of matrix elements and using an interaction time in the range
, where
is the time before energy flow is reversed for a system at an eigenfrequency, see Fig. 3C. In particular, links that are very weak relative to others can be missed, while a network where all couplings are strong leads to best results. The biggest drawback of the method is that the amount of measurements one needs to do scales with N2. This is a consequence of having an unknown topology with unknown and possibly distinct coupling strengths. Whether it is possible to do better without making additional assumptions about the network is still very much an open question.
The detected matrix A (left), compared to the original one (right) for a smallworld network of 60 nodes.
The initial state for the probe is squeezed vacuum with squeezing parameter r = 1 and phase space angle , while the network is initially in vacuum state. The chain couplings have a coupling strength of 0.2 while the seven extra links have a coupling strength of 0.1. Bare frequencies are ω0 = 0.25.
Discussion
We have explored bosonic complex networks from two complementary perspectives. We have shown how, having access and control of the network structure, we can engineer a wide variety of ad hoc structured environments. We have demonstrated that even small changes in the connectivity of the network, such as the introduction of an additional link, may cause a dramatic change in the shape of the spectral density. Highly structured spectral densities are found, e.g., in biological systems and, very recently, approaches of open quantum systems theory have been used to understand the loss of coherence in these systems30,31. As biological systems are very difficult to test in the laboratories, it is highly desirable to develop ways to simulate their dynamics in a controllable way. Possible experimental implementations of the model considered here include optical modes in cavities32, ions in segmented traps33, mechanical resonator arrays34 and cluster states created from an ultrafast frequency comb35. While implementing an arbitrary oscillator network is still beyond the reach of experimentalists, simple networks have been implemented with all three platforms and the realization of more complex networks is under active research.
With a shift in perspective to a complementary view point, we have investigated the possibility of revealing unknown properties of a complex quantum network by means of a single quantum probe suitably coupled to the network. We have developed and illustrated a method for efficient detection not only of the spectral density but, in principle, of the entire network structure, showing its effectiveness for virtually any network configuration. Our results are the first demonstration of the power of quantum probing for complex quantum networks going beyond toy models consisting of tens of nodes. While the present results are still a proof-of-principle demonstration, due to the generality of the system considered, they pave the way to the study of quantum probing in a variety of physical scenarios.
Additional Information
How to cite this article: Nokkala, J. et al. Complex quantum networks as structured environments: engineering and probing. Sci. Rep. 6, 26861; doi: 10.1038/srep26861 (2016).
References
Verstraete, F., Wolf, M. M. & Cirac, J. I. Quantum computation and quantum-state engineering driven by dissipation. Nature Phys. 5, 633 (2009).
Barreiro, J. T. et al. Experimental multiparticle entanglement dynamics induced by decoherence. Nature Phys. 6, 943 (2002).
Biercuk, M. J. et al. Optimized dynamical decoupling in a model quantum memory. Nature 458, 996 (2009).
Tan, H., Buchmann, L. F., Seok, H. & Li, G. Achieving steady-state entanglement of remote micromechanical oscillators by cascaded cavity coupling. Phys. Rev. A 87, 022318 (2013).
Manzano, G., Galve, F., Giorgi, G. L., Hernández-García, E. & Zambrini, R. Synchronization, quantum correlations and entanglement in oscillator networks. Sci. Rep. 3, 1439 (2013).
McDonald, M., McGuyer, B. H., Iwata, G. Z. & Zelevinsky, T. Thermometry via light shifts in optical lattices. Phys. Rev. Lett. 114, 023001 (2015).
Faccin, M., Migda, P., Johnson, T. H., Bergholm, V. & Biamonte, J. D. Community Detection in Quantum Complex Networks. Phys. Rev. X 4, 041012 (2014).
Tufarelli, T., Ferraro, A., Kim, M. S. & Bose, S., Reconstructing the quantum state of oscillator networks with a single qubit. Phys. Rev. A 85, 032334 (2012).
Haikka, P., McEndoo, S. & Maniscalco, S. Non-Markovian probes in ultracold gases. Phys. Rev. A 87, 012127 (2013).
Weiss, U. Quantum Dissipative Systems 2nd edn (World Scientific, Singapore, 1998).
Breuer, H.-P. & Petruccione, F. The Theory of Open Quantum Systems (Oxford University Press, New York 2007).
Rubin, R. J. Momentum autocorrelation functions and energy transport in harmonic crystals containing isotopic defects. Phys. Rev. 131, 964 (1963).
Vasile, R., Galve, F. & Zambrini, R. Spectral origin of non-Markovian open-system dynamics: A finite harmonic model without approximations. Phys. Rev. A 89, 022109 (2014).
Chin, A. W., Rivas, Á., Huelga, S. F. & Plenio, M. B. Exact mapping between system-reservoir quantum models and semi-infinite discrete chains using orthogonal polynomials. J. Math. Phys. 51, 092109 (2010).
Prior, J., Chin, A. W., Huelga, S. F. & Plenio, M. B. Efficient simulation of strong system-environment interactions. Phys. Rev. Lett. 105, 050404 (2010).
Martinazzo, R., Vacchini, B., Hughes, K. H. & Burghardt, I. Communication: Universal Markovian reduction of Brownian particle dynamics. J. Chem. Phys. 134, 011101 (2011).
Wubs, M., Saito, K., Kohler, S., Hänggi, P. & Kayanuma, Y. Gauging a quantum heat bath with dissipative Landau-Zener transitions. Phys. Rev. Lett. 97, 200404 (2006).
Groeblacher, S. et al. Observation of non-Markovian micromechanical Brownian motion. Nat. Comm. 6, 7606 (2015).
Pachón, L. A. & Brumer, P. Direct experimental determination of spectral densities of molecular complexes. J. Chem. Phys. 141, 174102 (2014).
Ciccarello, F. Waveguide-QED-based measurement of a reservoir spectral density. Phys. Rev. A 91, 062121 (2015).
Burgarth, D. & Maruyama, K. Indirect Hamiltonian identification through a small gateway. New J. Phys. 11, 103019 (2009).
Burgarth, D., Maruyama, K. & Nori, F. Indirect quantum tomography of quadratic Hamiltonians. New J. Phys. 13, 013019 (2011).
Kato, Y. & Yamamoto, N. Structure identification and state initialization of spin networks with limited access. New J. Phys. 16, 023024 (2014).
Watts, D. J. & Strogatz, S. H. Collective dynamics of ‘small-world’networks. Nature 393, 440–442 (1998).
ErdHös, P. & Rényi, A. On random graphs. Publicationes Mathematicae 6, 290–297 (1959).
Leibfried, D., Blatt, R., Monroe, C. & Winelnad, D. Quantum dynamics of single trapped ions. Rev. Mod. Phys. 75, 281 (2003).
Maniscalco, S., Piilo, J., Intravaia, F., Petruccione, F. & Messina, A. Simulating quantum Brownian motion with single trapped ions. Phys. Rev. A 69, 052101 (2004).
Martinazzo, R., Hughes, K. H., Martelli, F. & Burghardt, I. J. Chem. Phys. 377, 21–29 (2010).
Higham, N. J. Computing the polar decomposition-with applications. J. Sci. Comput. 7, 1160–1174 (1986).
Huelga, S. F. & Plenio, M. B. Vibrations, quanta and biology. Cont. Phys. 54(4), 181–207 (2013).
Mohseni, M., Omar, Y., Engel, G. S. & Plenio, M. B. Quantum Effects in Biology (Cambridge University Press, Cambridge, 2014)
Jarlov, C. et al. 1D and 2D arrays of coupled photonic crystal cavities with a site-controlled quantum wire light source. Opt. Express 21, 31082 (2013).
Walther, A. et al. Controlling fast transport of cold trapped ions. Phys. Rev. Lett. 109, 080501 (2012).
Habraken, S. J. M., Stannigel, K., Lukin, M. D., Zoler, P. & Rabl, P. Continuous mode cooling and phonon routers for phononic quantum networks. New J. Phys. 14, 115004 (2012).
Medeiors de Araújo, R. et al. Full characterization of a highly multimode entangled state embedded in an optical frequency comb using pulse shaping. Phys. Rev. A 89, 053828 (2014).
Acknowledgements
This work is supported by the Horizon 2020 EU Collaborative project Quantum Probes for Complex Systems (Grant Agreement 641277), by project FIS2014–60343-P (NOMAQ) and by the Academy of Finland (Project no. 287750). Financial support from Jenny and Antti Wihuri foundation and the University of Turku doctoral programme in Physical and Chemical sciences is also acknowledged. J.N. and J.P. thank IFISC for the hospitality. F.G. acknowledges support from the post-doctoral programme of UIB.
Author information
Authors and Affiliations
Contributions
J.N., S.M. and J.P. planned the research. J.N. did most calculations and numerical simulations, with help from F.G. and R.Z. All authors contributed in analysing and discussing results and writing the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Nokkala, J., Galve, F., Zambrini, R. et al. Complex quantum networks as structured environments: engineering and probing. Sci Rep 6, 26861 (2016). https://doi.org/10.1038/srep26861
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep26861
- Springer Nature Limited
This article is cited by
-
Online quantum time series processing with random oscillator networks
Scientific Reports (2023)
-
IBM Q Experience as a versatile experimental testbed for simulating open quantum systems
npj Quantum Information (2020)
-
Local probe for connectivity and coupling strength in quantum complex networks
Scientific Reports (2018)
-
Noise-robust quantum sensing via optimal multi-probe spectroscopy
Scientific Reports (2018)
-
A general framework for the Quantum Zeno and anti-Zeno effects
Scientific Reports (2016)