Development of a method for the application of solid-phase microextraction to monitor biodegradation of volatile hydrocarbons during bacterial growth on crude oil

A quantitative solid-phase microextraction, gas chromatography, flame ionization detector (SPME-GC-FID) method for low-molecular-weight hydrocarbons from crude oil was developed and applied to live biodegradation samples. Repeated sampling was achieved through headspace extractions at 30°C for 45 min from flasks sealed with Teflon Mininert. Quantification without detailed knowledge of oil–water–air partition coefficients required the preparation of standard curves. An inverse relationship between retention time and mass accumulated on the SPME fibre was noted. Hydrocarbons from C₅ to C₁₆ were dated and those up to C₁₁ were quantified. Total volatiles were quantified using six calibration curves. Biodegradation of volatile hydrocarbons during growth on crude oil was faster and more complete with a mixed culture than pure isolates derived therefrom. The mixed culture degraded 55% of the compounds by weight in 4 days versus 30–35% by pure cultures of Pseudomonas aeruginosa, Rhodococcus globerulus or a co-culture of the two. The initial degradation rate was threefold higher for the mixed culture, reaching 45% degradation after 48 h. For the mixed culture, the degradation rate of individual alkanes was proportional to the initial concentration, decreasing from hexane to undecane. P. fluorescens was unable to degrade any of the low-molecular-weight hydrocarbons and methylcyclohexane was recalcitrant in all cases. Overall, the method was found to be reliable and cost-effective. Journal of Industrial Microbiology & Biotechnology (2000) 25, 155–162.