Abstract
Ionic and molecular selectivity are considered unique for the nanoscale and not realizable in microfluidics. This is due to the scale-matching problem—a difficulty to match the dimensions of ions and electrostatic potential screening lengths with micron-sized confinements. Here, we demonstrate a microscale realization of ionic transport processes closely resembling those specific to ionic channels or in nanofluidic junctions, including selectivity, guidance and flow focusing. As a model system, we explore electrokinetic spherical Janus micromotors moving over charged surfaces with complex charge distribution and without any topographical wall. We discuss peculiarities of the long-range electrostatic interaction on the behavior of the system including interface crossing and reflection of positively charged particles from negatively charged interfaces. These results are crucial for understanding the electrokinetic transport of biochemical species under confinement, have the potential to increase the precision of lab-on-chip-based assays, as well as broadening use cases and control strategies of nano-/micromachinery.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Introduction
The transport of ions across macromolecular pores in cell membranes, the so-called ion channels, is essential to maintain life processes. Biological ion channels allow only specific species to cross the membrane with very high selectivity (Fig. 1a)1. This functionality is broadly explored in nanofluidics for the realization of “artificial ion channels”2. Bioinspired nanofluidic systems consisting of nanopores, nanotubes, nanofabricated junctions3, diodes and transistors enabled major discoveries in understanding the properties of fluids under nanoscale confinement and opened a new way to handle molecular or ionic species in fluids2 for water purification, development of new generation of batteries, and processing of complex biological solutions, to name just a few (Fig. 1b)3,4.
a Ions selectively across the biological cell membrane. b Ion sieving in a rectifying single nano-channel. c Schematic of macro-ions transport at micrometer scale relying on long-range interaction with soft charged walls. d Characteristic dimensions of channels (D) and objects (S) at different scales. Even when S > D, charged Janus particles moving in a potential with soft walls can pass through a narrow constriction in the pattern. e–g In the case of mechanical hard wall, the decrease of the height of the wall increases the probability of a micromotor to cross the wall (green line in f). On geometrically flat yet charged soft walls, charged Janus micromotors demonstrate a significant decrease of the crossing probability (red line in f). Instead of crossing the flat boundary, the majority of Janus particles are reflected from the flat charged interface (g). Error bars indicate the standard deviations of the average values of reflection probability.
Although ionic selectivity is quite common in multiple systems at the micrometer scale (e.g., nano- and micromachinery5, and lab on chip bioassays6,7,8), the effect is considered to be specific to nanoscale and can barely be reproduced in microfluidics. This is due to the difficulties in matching the dimensions of ions and electrostatic potential screening lengths with the micron-sized confinement (Fig. 1d). The geometrical mismatch is huge when we compare the motion of ions in micrometer large channels with their biological counterparts, where the charge selectivity is due to hydration processes and steric interactions with characteristic lengths of about 1–5 nm1. There are orders of magnitude difference even when compared to nanofluidics, where the mechanism for charge selectivity is due to van der Waals or electrostatic interactions between a charged wall and ions (characteristic screening length of about 50–100 nm).
To overcome this scale-matching problem and to emulate the ion transport phenomena in microfluidics, we propose a macroscopic model of a motile ion, the so-called macro-ion. In this scenario, functional motile macro-ions should be placed and guided in microchannels relying on long-range electrostatic interaction. This task calls for the investigation of the interaction between the channel potential and macro-ions and propagation of the particles through microfabricated pores. Charged colloidal particles9,10 and spherical Janus micromotors11 driven by the ionic self-electrophoresis12,13 can serve as a model system of macro-ions to carry out fundamental studies of the ionic transport at the microscale.
In this respect, Uspal et al. theoretically proposed to use chemically patterned surfaces for catalytic Janus particle and predicted a multitude of interaction scenarios, including reflection of particles from the boundary, hovering, and sliding along the boundary14,15,16. Here, we demonstrate ionic transport processes at the microscale by exploring electrokinetic spherical Janus micromotors moving over charged surfaces with a complex spatial charge distribution. We realize topographically flat complex patterns on a chemically functionalized substrate containing regions of positive and negative Zeta potentials. We show that flat charged patterns enable long-range soft potentials—that smoothly change with the interaction distance—allowing to realize experimentally “soft walls” that affect the motion of charged Janus colloids. Relying on the presence of these electrostatic potentials and exploring the ionic self-diffusiophoresis propulsion mechanism of Janus particles, we demonstrate the ability of the motile macro-ions to navigate in diverse chemical pattern geometries. As the nature of the interactions between a soft wall and a macro-ion is distinct from the one characteristic for mechanical hard walls (Fig. 1c, d)17,18,19,20, we observe unconventional phenomena, when the particle approaches the wall (Fig. 1e–g). Main differences are observed in processes related to the reflection from- or crossing the wall by a motile particle21 (the paradigm of “reflection from or crossing” a barrier is analogous to the reflection from or transmission (via quantum tunneling) through a barrier in quantum mechanics where a quantum “particle” can either be reflected from the barrier with some probability R between 0 and 1, or be transmitted with the probability T = 1 – R (see, e.g., ref. 21). This behavior is distinct from the reflection of a classical particle from a mechanical wall when R ≡ 1). For instance, while a decrease in the height of a traditional “hard wall” increases the probability of the micromotor to cross the wall (Fig. 1e), the use of a geometrically flat soft wall demonstrates a large decrease of the crossing probability (Fig. 1e). Instead of crossing the flat boundary, around 80% of positively charged Janus particles in our experiment are reflected from the flat negatively charged interface (Fig. 1f, g). Noticeably, the average interaction time between Janus micromotors and the charged interface is found to be about 0.2 s, which is two orders of magnitude shorter than during the interaction with a hard wall.
We use soft walls to construct a microscale pore constriction, resembling selective ion channels by geometry, and demonstrate the critical differences of the microparticles propagations compared to the hard-wall. This includes size-dependent selectivity, flow focusing, and the possibility to move through the constriction for a Janus particle with a size larger than the width of the constriction. These results have strong implications for the fields of smart nano-/microscale machines and lab-on-chip-based assays.
Results and discussion
Positively charged light-activated Janus micromotors
We fabricate photocatalytic blue light-activated Janus particles consisting of a 60-nm-thick AgCl film prepared on polystyrene (PS) microspheres with a diameter of about 2 µm. In contrast to prior reports on plasmonic Ag/AgCl Janus micromotors22,23, we utilize Ag/AgCl/PS Janus particles, which are coated with β-FeOOH nanocrystals11. Figure 2a shows a scanning electron microscopy (SEM) image of a capped microsphere revealing a substantial surface roughness. The element mapping, performed using energy-dispersive X-ray spectroscopy (EDX), indicates the presence of AgCl at only one side of the PS bead while the signal from Fe is detected on the whole surface of the particle (Fig. 2b). These Ag/AgCl/β-FeOOH/PS Janus microspheres exhibit positive Zeta potentials (ζ = +27 mV), that correspond to a positive electric charge distributed over the surface.
a SEM image of Ag/AgCl/ β-FeOOH/PS Janus micromotors, Scale bar: 1 µm. Inset: magnified SEM images of the PS-coated side of the particles. Scale bar: 200 nm. b EDX image of Janus micromotor for the Fe, Ag, Cl elements. Scale bar: 2 µm. c Schematic image illustrating the propulsion direction of the Ag/AgCl/β-FeOOH/PS Janus micromotor near a positively charged surface. Ag/AgCl/β-FeOOH/PS Janus micromotors move towards the cap. d Schematic image of the fabrication process and the charged pattern on a substrate. (iii) The Atomic Force Microscope (AFM) image of the APTES/Gold charged pattern and the corresponding surface roughness. Scale bar: 5 µm. e Concept figure showing a Janus micromotor moving in a complex pattern with soft walls. Dashed lines correspond to the trajectories of Janus micromotors.
Once suspended in deionized water and dropped onto the surface of glass, Janus particles quickly sediment and experience thermal fluctuations. When illuminating them with blue light, Janus particles are brought into motion11, driven by several parallel photocatalytic processes. The light initiates the decomposition of AgCl and results in an asymmetric electric field around the Janus particle11,12,22,23,24. Owing to the positive charge of the particle, it sticks to a negatively charged substrate and moves along a positively charged substrate in the direction towards the catalytic cap (Fig. 2c) with a speed of about 30 µm s−1 (Supplementary Fig. 1 and Supplementary Movie 1). This behavior is in contrast with previous reports on negatively charged photocatalytic swimmers, where the preferred orientation of the motion is away from the cap11,22.
Surfaces with complex spatial charge distribution
We fabricate different topographically flat chemical patterns including stripes, circles, rings, and flow-focusing structures (Supplementary Fig. 2) by deterministically tailoring the distribution of positive and negative charges at the surface (Fig. 1d and Supplementary Fig. 2). For this purpose, the self-assembled monolayer (SAM) of (3-Aminopropyl) triethoxysilane (APTES) was immobilized at the glass surface via the reaction of silanization. The Zeta potential of the APTES SAM is ζAPTES = +14.5 mV (pH = 5.65, Supplementary Fig. 3). To achieve a negative charge distribution, and for better visualization of the pattern shapes and boundaries, we deposited a 5-nm-thick gold layer. The respective Zeta potentials for the gold layer is ζAu = −46 mV (pH = 5.65). The thickness of the gold layer is chosen to match that of the positively charged areas functionalized with APTES molecules (about 4 nm; Fig. 2d). Considering the diameter of Janus particles (2 µm) and their respective Brownian fluctuation scales (~1 µm), the separation distance between the bottom of the Janus particle and substrate is substantially larger than the 5 nm thickness of the gold layer. Furthermore, we estimate the Debye screening length to be about 200 nm and the particle-wall gap of several hundred nanometers11. In this respect, we can safely neglect a slight variation between the thicknesses of the negatively and positively charged regions (about 1 nm difference) and consider the patterned surface as topographically flat. This renders the resulting chemically patterned substrates to be free of mechanically hard interfaces.
Janus macro-ions moving over charged surfaces
When an aqueous suspension of positively charged Janus particles is placed onto the patterned substrate, the particles reveal Brownian motion when located above the APTES region but irreversibly stick to the negatively charged gold surface due to electrostatic attraction. Once the blue light illumination is switched on, Janus particles move along the APTES surface, propelling towards the cap. At the same time, the illumination does not bring in motion those Janus particles, which were stuck to the gold surface: they remain immobile. When motile positively charged particles approach the APTES/gold interface, most of the studied Janus particles (about 80%) experience reflection from the interface of opposite charge: positively charged particles are reflected away from the region with a negatively charged gold towards the positively charged APTES (Fig. 3a, b). The remaining portion of the Janus particles (about 20%) crosses the interface and moves away from the substrate (Fig. 3c). Since Janus micromotors move towards their caps, the orientation of the particle cap is changed upon approaching the interface.
a–c When a Janus micromotor approaches the interface it can experience (a) 2D reflection, b 3D reflection, or c cross the interface. d–f Schematic illustration of the interaction of Janus particles with the interface: d 2D reflection, e 3D reflection, and f crossing the interface. The change of the speed of Janus micromotors during the process of g 2D reflection, h 3D reflection and i crossing the interface. The solid lines in g–i are guide to the eye.
We distinguish two types of reflection of Janus particles from the APTES/gold interface: (i) two-dimensional (2D) rotation of the cap when the reorientation of the cap occurs within the substrate plane (Fig. 3a, d; indicated as 2D reflection), and (ii) three-dimensional (3D) rotation of the cap when the particle reorients via an out-of-plane rotation of the cap (Fig. 3b, e; indicated as 3D reflection). Figure 3d–f summarize the behavior of Janus beads at the interface, where the top view and side view of particles reflecting from the interface and crossing the interface are shown. Figure 3d presents a sketch of the 2D reflection. The particle remains in the substrate plane and its axis reorients in the same plane via sliding along the interface and then detaching from it. In the case of 3D reflection, the Janus particle does not overcome the potential barrier at the APTES/gold interface. It is reflected back via lift and rotation out of the substrate plane (Fig. 3e). Finally, if the velocity of the particle is sufficiently high, it overcomes the potential barrier via lifting out of the substrate plane, and in this way crosses the interface (Fig. 3f).
We observe that the entire reorientation process is rather fast and, in most of cases, the persistence time, td, extends over several hundreds of milliseconds only (indicated bands in Fig. 3g–i). Still, even this short interaction time of the particle with the interface is sufficient to assure that the reflection is not specular, with the incident angle (θ1) being smaller than the reflection angle (θ2) (Fig. 3d, e and Supplementary Movie 2). The corresponding statistics is summarized in Supplementary Table 3. Remarkably, not only the orientation of the cap is affected but also the speed of Janus particles gradually decreases well before approaching the APTES/gold interface. The speed reaches its minimum at the interface and increases when moving back after the reflection (Fig. 3g–i). Accompanied by the non-specular reflection from the interface, this slowing down suggests the presence of a long-range interaction potential between Janus micromotors driven by the ionic self-diffusiophoresis11,12,22,23 and electrostatic potential formed at the interface of the pattern. The experimental observation of the reflection of positively charged particles from the negatively charged gold surface indicates that the effect cannot be explained based on electrostatic interactions only. Additional factors related to the driving mechanism of the particles should be considered.
Mechanism of reflection
Light-activated Ag/AgCl/β-FeOOH/PS Janus micromotors release Cl- and H+ ions and achieve self-propulsion due to the ionic self-diffusiophoresis mechanism11,12,25. The difference in the diffusivity between Cl- and H+ ions result in a self-generated inward pointing electric field around the Janus micromotor. This field induces propulsion of Janus micromotors and electro-osmotic flows (EOFs) along the surface of the charged substrate26,27. The EOFs induced by the self-generated electric field around the particle are illustrated in Fig. 4a. We simulated the electric potential distribution around the Janus particle and found a lowering of the electric potential near the AgCl cap. When a positively charged Janus particle moves towards the negatively charged gold interface with its cap forward, the self-generated electric field induces an EOF near the stationary charged interface (APTES and gold regions), as shown in Fig. 4b, c. The direction of the EOF is determined by the sign of the surface charge and the direction of the electric field. As illustrated in Fig. 4d, e, the surface charge near the positively charged APTES surface is formed by Cl- ions. These ions generate the EOF in the outward direction from the interface (green arrow in Fig. 4d). In contrast, at the gold side of the pattern, H+ ions generate the EOFs towards the interface (shown by the dark red arrow in Fig. 4d). These two EOFs induced by oppositely charged ion species are responsible for the lift of the Janus particle during the 3D reflection (Fig. 4e). Furthermore, the EOFs decrease significantly when particles are far away from the charged substrate. Thus, the presence of EOFs creates a torque that leads to the rotation of the Janus particle in the clockwise or counterclockwise direction (Fig. 4e). As a result, the Janus particle lifts and the orientation of the cap flips backward, hence leading to a complex 3D reflection. Moreover, the magnitude of the EOF under the Janus particle (the green arrow in Fig. 4d) increases significantly, when the separation distance between the Janus particle and interface becomes smaller than 5 μm (Fig. 4f). Therefore, the specific profile of the EOF prevents the particle from moving forward and leads to the decrease of the velocity of Janus particles when approaching the interface. These simulation results are consistent with our experimental observations. In the case of the 2D reflection, when the separation distance between the Janus particle and interface is less than 5 µm, the speed of the Janus particle is found to decrease rapidly (Fig. 4f). The speed of a charged Janus particle is determined by a superposition of electrophoresis of the charged particle itself and the electro-osmotic flow caused by the charged wall. The speed of colloid micromotors undergoing ionic diffusiophoresis is proportional to the difference in Zeta potential between the colloid and the wall: U∝ (ζc − ζw), where ζc and ζw are Zeta potentials of colloidal micromotor and nearby charged wall11,28,29,30.
a–c COMSOL simulations of the electric potential and electro-osmotic flow distributions around a Janus particle close to the interface between two oppositely charged surfaces. a The distribution of the electric potential (mV, color-coded) and electric field (red arrows) around a Janus particle. The distribution of the electro-osmotic flow near the charged interface for the case when the separation distance between the center of the Janus particle and the APTES/Gold interface is b 1 μm and c 5 μm. The color code indicates the magnitude of the EOFs, and the red arrows indicate the flow direction of the EOFs. d, e Schematic illustrations of the mechanism of the repulsive interaction between a charged Janus micromotor and a charged interface. The electric field (E) generated by a Janus particle induced two EOFs near the positively charged APTES surface (EOF1) and negatively charged gold surface (EOF2). Both EOFs are very strong close to the charged pattern surface and flow in the same direction. EOFs create a torque that leads to the rotation of the Janus particle in the clockwise or counterclockwise direction. f Experimentally measured speed of three Janus particles (green line) and simulated speed of the electro-osmotic flow under the Janus particle (dark red line) as a function of the separation distance between the Janus particle and APTES/Gold interface.
Navigation through patterns
Understanding the interaction of charged Janus particles with the interface of positively/negatively charged surfaces can be used to navigate the macro-ions in complex microscale patterns, e.g., circles, rings, and even achieve filtering of the transport through specially designed constrictions. The guidance is based on multiple reflections of Janus micromotor’s from the interface, similarly to the propagation of light in optical waveguides. This behavior is distinct from the previously demonstrated cases of the particle’s motion in a microfabricated patterned environment17,18, where micromotors prefer to follow the interface (persistence time td 》1 s).
Figure 5 summarizes the experimental results demonstrating the guidance of Ag/AgCl/ β-FeOOH/PS Janus particles through the diverse pattern geometries, e.g., linear channels with a width of 18 µm (Fig. 5a), a square-shaped track geometry (Fig. 5b), and a circular pattern with a diameter of 40 µm (Fig. 5c and Supplementary Movie 3). Janus micromotors can reveal a rather complex motion at sophisticated patterns. This behavior is exemplified with motion in a circular ring pattern (channel width: 9 µm; Fig. 5d and Supplementary Movie 3) and in a square array of circular patterns (diameter of the circle: 5 µm, gap between patterns: 5 µm; Fig. 5e and Supplementary Movie 4). While the isolated circular patterns are covered with a 5-nm-thick gold layer, the remaining part is a monolayer of APTES. The Janus micromotor can bypass the isolated circular gold patterns by turning the direction all the time. This behavior shows no pinning to the circle’s wall previously reported17,18,20,31, and is characterized by multiple reflections of a Janus micromotor from a soft wall.
Optical micrograph of Ag/AgCl/β-FeOOH/PS Janus particles (labeled with a yellow dashed circle) on an APTES/Gold charged pattern. While the darker areas correspond to negatively charged gold, the brighter areas are positively charged APTES. The line with color mapping represents the trajectory of a Janus micromotor moving on a straight stripe pattern, b square ring, c circular pattern, d circle ring, and e circular dots array. The color-coded scale represents the observation time from the initial state (red) to the final state (blue). Scale bars: 10 μm.
Particle transport through the soft wall
Cell membranes and nanofluidic constrictions enable filtering specific ion species. This effect is not reported at the microscale. We demonstrate the ability to focus and filter Janus particles using flow-focusing constrictions with a gradually changing the ratio of the particle diameter to the constriction width: from 0.14 to 1.1 (Fig. 6a, b). These geometries successfully focus Janus micromotors towards the narrowest region and guide them through a narrow constriction. To demonstrate the focusing and filtering capabilities, we fabricate flat chemical constrictions with identical dimensions. For this study, we use colloidal Janus particles with different diameters (dJP = 2 µm, 2.39 µm, 3.03 µm, 4 µm). For a constriction of width Wc formed by hard walls, theoretically, almost all Janus particles can pass through the constriction when dJP/Wc ≤ 1, and the probability becomes 0 for dJP/Wc > 1 (Fig. 6c). In the case of charged Janus particles moving in the potential with a soft wall, the Janus particle can pass through the narrow constriction even when dJP/Wc is larger than 1. In particular, Janus particles with the diameter of 4 μm can pass through the narrow focusing part with a width of 3.56 µm (Fig. 6c, dJP/Wc = 1.1, Supplementary Movie 5). Another effect, which is different compared to the case of hard walls, is related to the substantially reduced probability for Janus particles to pass through the constriction for the regime when dJP/Wc ≤ 1 (Fig. 6c). This is caused by the EOFs generated in the vicinity of the boundaries (Fig. 6d and Supplementary Figs. 4–7). The focusing geometry with two converging APTES/gold boundaries leads to the slowing down of the Janus particle just before entering the constriction (Fig. 6d). This is due to the fact that the direction of the EOF on the negatively charged gold surface on both sides is towards the Janus micromotor. Thus, the EOF also plays a significant role in the focusing effect.
a Experimental trajectories of Janus micromotors moving on the charged pattern with a constriction, for various ratios of dJP/Wc. b A sketch overlaid with a micrograph of the channel with a constriction realized using soft walls with the description of the possible scenario of particle behavior in the constriction: passing (filtering), reflecting, crossing or sticking on the charged interface. c The probability for a Janus particle to enter a constriction is defined using soft walls for varying ratio dJP/Wc. The theoretical limit for a hard-wall channel is indicated with a black frame. The blue dashed line is a guide to the eye to observe the tendency of the probability scaling. Error bars indicate the standard deviations of the average values of probability to enter a constriction. d COMSOL simulations of the electro-osmotic flow distribution around a Janus particle on the flow-focusing charged pattern. e A sketch illustrating an effective repulsive potential created by EOFs around a Janus particle. f Simulated trajectories of Janus micromotors moving on the charged pattern with a constriction (dJP/Wc = 0.91) showing the reflection event and the event when the particle is passing through the constriction. Green trajectory illustrates the scenario when a particle moves back to the wide channel. The pink trajectory shows when a particle moves towards the constriction but is reflected by the step potential barrier. The red trajectory represents when a particle enters the constriction but later turns back.
Molecular-dynamics simulations (see Methods) of the motion of Janus particles were performed for a double-step repulsive interaction potential consisting of a long-range soft repulsive potential and short-range “hard-core” potential (Fig. 6e). Employing this type of interaction potential, where the long-range part is equivalent to the exclusion radius23,32, explains the experimentally observed slowing down of the particle motion when approaching the interface (compare to experimental data, Fig. 4f), the appearance of the potential-energy barrier for a Janus particle when entering a narrow constriction (with a size smaller than the interaction radius) and focusing inside the constriction (compare to experimental data, Fig. 6a). The resulting trajectories (Fig. 6f and Supplementary Fig. 7) calculated for various ratios dJP/Wc correspond to different scenarios of the particle motion: when a particle moves back to the wide channel, when it moves towards the constriction but is reflected by the step potential barrier (which is specific for the charged pattern system; it is absent in the case of hard-wall constriction), when it enters the constriction but later turns back, and finally when a Janus particle passes all the way through the constriction. Thus, the results of simulations qualitatively reproduce the behavior observed in the experiments including the suppression of the particle velocity near the constriction wall, reflection from the constriction, entering and “focusing” inside the constriction, and passing through the constriction. The revealed good correspondence between the experimental data and the simulations confirms the relevance of long-range potentials for the description of the behavior of charged Janus particles in channels with soft walls.
Conclusions
Inspired by long-range soft potentials for controlling ion-selective transport in nanofluidic systems, we demonstrated the microscale realization of the features typical for the nanoscale ionic transport and validated it for the specific case of electrokinetic Janus micromotors moving over charged surfaces with a complex spatial charge distribution. We fabricated soft walls represented by an interface between regions of opposite charge, which enable long-range potentials affecting the motion of charged Janus particles. Owing to the long-range electrostatic interaction between the charged soft wall and a particle, we observed their unconventional behavior at the boundary and in the constriction: e.g., reflection from the oppositely charged interface, suppressed probability of crossing the topographically flat yet charged interface, flow focusing and filtering. Namely, positively charged self-propelled Janus microspheres exhibited 2D or 3D reflection at the interface formed by the positively/negatively charged regions, or crossing the interface induced by the electro-osmotic flows arising between the Janus micromotors and the charged patterns. By utilizing this reflection behavior, we proposed a novel method to steer Janus motors along complex trajectories by following charged patterns. The revealed phenomena such as particle guidance, flow focusing, and filtering make flat charged patterns promising for future applications in lab-on-chip systems. The demonstrated behavior lays the foundations for developing a new approach to transport species in microfluidics, e.g., performing separation tasks, such as guidance- and size-based sorting. Our results deliver new knowledge on the electrokinetic transport of biochemical species, as well as on the control of species in fluidic samples in microscale confinement, relevant for the field of ionotronics.
Methods
Materials and Instruments
The chemicals used, including polyvinylpyrrolidone (PVP) (Mw = 55,000), APTES ((3-Aminopropyl)triethoxysilane), Iron(III) chloride hexahydrate (FeCl3•6H2O), and the polystyrene spheres (diameter: 2 µm) are from Sigma-Aldrich. Polystyrene spheres (diameter: 2.39 µm, 3.03 µm, 4 µm) are from Microparticles GmbH.
Janus particle fabrication
Janus particles were fabricated as follows11,32: monolayers of polystyrene (PS) spheres with a diameter of 2 µm were prepared by casting a drop of colloidal suspension onto thin glass substrates. Then, a 60-nm-thick Ag layer was thermally evaporated (base pressure 7 × 10−5 mbar) onto the PS particles. Afterward, Janus particles were detached from the substrate using an ultrasonication process and resuspended in deionized water. Particles were further dispersed into PVP (300 mM) and FeCl3 (20 mM) mixed solution for 1 h for the synthesis of Ag/AgCl layers. Afterward, the colloids with the synthesized Ag/AgCl hemispheres were washed in deionized water using a centrifugation process and then dispersed in deionized water. Then, we mixed suspension with PVP (300 mM) and FeCl3 (20 mM) solution for another 6 h. During this time, β-FeOOH was forming on the surface of the Janus particles by hydrolyzing the FeCl3 solution33. The synthesis process was conducted in a dark environment. Finally, the Janus particles were washed in deionized water using a centrifugation process and then dispersed in deionized water for further experiments.
Substrate cleaning
The glass slides as substrates were pretreated by immersion in a hot H2SO4: H2O2 (7:3) solution for 30 min, followed by washing with a copious amount of deionized water.
Charged pattern preparation
Charged patterns are fabricated with the following process. First, the substrate was functionalized with APTES. The APTES solution was mixed with deionized water and ethanol in the ratio of ethanol:H2O:APTES = 100:5:2 and left at room temperature for 10 min. Then, the plasma-activated substrate was immersed into the silanization mixture for 1 h with gentle shaking. Next, the substrate was washed three times with pure ethanol and left 15 min at 120 °C in an oven. For patterning the substrate, a positive photoresist (S1828 or S1813, Microchemicals, Westborough, USA) was coated at 4000 rpm for 60 s, soft-baked at 115 °C for 60 s, and exposed to UV light (Karl Süss MJB4, Garching, Germany). After exposure to UV for 10 s (3.5 s for S1813), the structure is developed for 60 s in AZ 726 MIF (Microresist Technology GmbH, Germany) and rinsed with deionized water. Using air plasma for 1 min, silane is removed from the undesired areas. Then the sample is rinsed with deionized water. A of 5-nm-thick gold layer is deposited onto the surface via thermal evaporation method (base pressure: 7 × 10−5 mbar). After deposition, the photoresist is removed by sonication in acetone for 10 s followed by a subsequent 30 min washing step in acetone. Lastly, the substrates were washed three times with isopropanol and dried with nitrogen.
Particle tracking
TrackMate from the image processing software Fiji (http://fji.sc/) was used to track trajectories of passive beads.
Simulations
The dynamics of active Janus particles was simulated by numerically integrating the overdamped Langevin equations20,22,23,32,34,35:
for i, j running from 1 to the total number N of particles, v0 is self-velocity of Janus particles, which is set to zero for immobilized particles. Here, ξi0 (t) = (ξi0,x(t), ξi0,y(t)) is a 2D thermal Gaussian noise with correlation functions〈ξ0,α (t) = 0,〈ξ0,α (t)ξ0,β (t) = 2DTδαβδ(t), where α, β = x, y and DT is the translational diffusion constant of a passive particle at fixed temperature. ξθ (t) is an independent 1D Gaussian noise with correlation functions 〈ξθ (t) = 0 and 〈ξθ (t)ξθ (0) = 2DRδ(t) that models fluctuations of the propulsion angle θ. The diffusion coefficients DT and DR can be directly calculated or extracted from experimentally measured trajectories and MSD, by fitting to theoretical MSD. Thus, for a particle with diameter of 2 µm diffusing in water at room temperature, DT ≈ 0.22 μm2 s−1 and DR ≈ 0.16 rad2 s−1. The term, \({\sum }_{{ij}}^{N}{f}_{{ij}}\), represents, in a compact form, the sum of all inter-particle interaction forces in the system including23,32: (i) elastic soft-core repulsive interactions between active particles; here we assume the same short-range interaction between active particles and the interface; and (ii) the effective long-range repulsive interaction between Janus particles and the interface, due to the EOF induced by the Janus particle. The latter contribution (ii) is modeled by a finite-range field of radial forces, decreasing in amplitude as 1/r from the center of a Janus particle23,32:
where γ is the cumulative “strength of the flow” parameter.
Data availability
The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
Gouaux, E. & MacKinnon, R. Principles of selective ion transport in channels and pumps. Science 310, 1461–1465 (2005).
Daiguji, H. Ion transport in nanofluidic channels. Chem. Soc. Rev. 39, 901–911 (2010).
Cheng, L.-J. & Guo, L. J. Nanofluidic diodes. Chem. Soc. Rev. 39, 923–938 (2010).
Zhang, H. et al. Bio-inspired smart single asymmetric hourglass nanochannels for continuous shape and ion transport control. Small 11, 786–791 (2015).
Wang, Z., Wang, Z., Li, J., Tian, C. & Wang, Y. Active colloidal molecules assembled via selective and directional bonds. Nat. Commun. 11, 1–12 (2020).
Soda, Y., Citterio, D. & Bakker, E. Equipment-free detection of K+ on microfluidic paper-based analytical devices based on exhaustive replacement with ionic dye in ion-selective capillary sensors. ACS Sensors 4, 670–677 (2019).
Horiuchi, N. On-chip bioassay. Nat. Photon. 7, 12–12 (2013).
Arshavsky-Graham, S. & Segal, E. Lab-on-a-Chip Devices for Point-of-Care Medical Diagnostics (Springer, 2020).
Hueckel, T., Hocky, G. M., Palacci, J. & Sacanna, S. Ionic solids from common colloids. Nature 580, 487–490 (2020).
Leunissen, M. E. et al. Ionic colloidal crystals of oppositely charged particles. Nature 437, 235–240 (2005).
Huang, T. et al. Impact of surface charge on the motion of light-activated Janus micromotors. Eur. Phys. J. E 44, 1–11 (2021).
Zhou, C., Zhang, H., Tang, J. & Wang, W. Photochemically powered AgCl Janus micromotors as a model system to understand ionic self-diffusiophoresis. Langmuir 34, 3289–3295 (2018).
Chang, X. et al. Motile micropump based on synthetic micromotors for dynamic micropatterning. ACS Appl. Mater. Interfaces 11, 28507–28514 (2019).
Uspal, W., Popescu, M. N., Dietrich, S. & Tasinkevych, M. Self-propulsion of a catalytically active particle near a planar wall: from reflection to sliding and hovering. Soft Matter 11, 434–438 (2015).
Uspal, W., Popescu, M. N., Dietrich, S. & Tasinkevych, M. Guiding catalytically active particles with chemically patterned surfaces. Phys. Rev. Lett. 117, 048002 (2016).
Uspal, W., Popescu, M., Dietrich, S. & Tasinkevych, M. Active Janus colloids at chemically structured surfaces. J. Chem. Phys. 150, 204904 (2019).
Simmchen, J. et al. Topographical pathways guide chemical microswimmers. Nat. Commun. 7, 1–9 (2016).
Volpe, G., Buttinoni, I., Vogt, D., Kümmerer, H.-J. & Bechinger, C. Microswimmers in patterned environments. Soft Matter 7, 8810–8815 (2011).
Liu, C., Zhou, C., Wang, W. & Zhang, H. Bimetallic microswimmers speed up in confining channels. Phys. Rev. Lett. 117, 198001 (2016).
Yu, H. et al. Confined catalytic janus swimmers in a crowded channel: geometry‐driven rectification transients and directional locking. Small 12, 5882–5890 (2016).
Griffiths, D. J. & Schroeter, D. F. Introduction to Quantum Mechanics (Cambridge university Press, 2018).
Wang, X. et al. High-motility visible light-driven Ag/AgCl Janus micromotors. Small 14, 1803613 (2018).
Wang, X. et al. Visible light actuated efficient exclusion between plasmonic Ag/AgCl micromotors and passive beads. Small 14, 1802537 (2018).
Huang, T. et al. Anisotropic exclusion effect between photocatalytic Ag/AgCl Janus particles and passive beads in a dense colloidal matrix. Langmuir 36, 7091–7099 (2020).
Ibele, M., Mallouk, T. E. & Sen, A. Schooling behavior of light-powered autonomous micromotors in water. Angew. Chem. 121, 3358–3362 (2009).
Wang, W., Duan, W., Ahmed, S., Mallouk, T. E. & Sen, A. Small power: autonomous nano-and micromotors propelled by self-generated gradients. Nano Today 8, 531–554 (2013).
Chiang, T.-Y. & Velegol, D. Localized electroosmosis (LEO) induced by spherical colloidal motors. Langmuir 30, 2600–2607 (2014).
Keh, H.-J. & Anderson, J. Boundary effects on electrophoretic motion of colloidal spheres. J. Fluid Mech. 153, 417–439 (1985).
Anderson, J. L. Colloid transport by interfacial forces. Ann. Rev. Fluid Mech. 21, 61–99 (1989).
Keh, H. J. & Chen, S. B. Electrophoresis of a colloidal sphere parallel to a dielectric plane. J. Fluid Mech. 194, 377–390 (1988).
Katuri, J., Caballero, D., Voituriez, R., Samitier, J. & Sanchez, S. Directed flow of micromotors through alignment interactions with micropatterned ratchets. ACS Nano 12, 7282–7291 (2018).
Huang, T. et al. Inverse solidification induced by active Janus particles. Adv. Funct. Mater. 30, 2003851 (2020).
Ge, G. et al. Ultrathin FeOOH nanosheets as an efficient cocatalyst for photocatalytic water oxidation. J. Mater. Chem. A 7, 9222–9229 (2019).
Ghosh, P. K., Misko, V. R., Marchesoni, F. & Nori, F. Self-propelled Janus particles in a ratchet: Numerical simulations. Phys. Rev. Lett. 110, 268301 (2013).
Debnath, D. et al. Enhanced motility in a binary mixture of active nano/microswimmers. Nanoscale 12, 9717–9726 (2020).
Acknowledgements
TH acknowledges the China Scholarship Council (CSC) for financial support. V.R.M. and D.M. acknowledge support from the Research Foundation-Flanders (FWO-Vl), Grant No. G029322N. A.S. acknowledges German Research Foundation (DFG), grant SY125/11-1 and SY125/15-1 for financial support. F.N. is supported in part by: Nippon Telegraph and Telephone Corporation (NTT) Research, the Japan Science and Technology Agency (JST) [via the Quantum Leap Flagship Program (Q-LEAP), the Moonshot R&D Grant Number JPMJMS2061, and the Centers of Research Excellence in Science and Technology (CREST) Grant No. JPMJCR1676], the Japan Society for the Promotion of Science (JSPS) [via the Grants-in-Aid for Scientific Research (KAKENHI) Grant No. JP20H00134], the Army Research Office (ARO) (Grant No. W911NF-18-1-0358), the Asian Office of Aerospace Research and Development (AOARD) (via Grant No. FA2386-20-1-4069), and the Foundational Questions Institute Fund (FQXi) via Grant No. FQXi-IAF19-06. This project is supported in part via the German Research Foundation (DFG) grants BA4986/8−1 and MA5144/14−1. The authors thank Dr. Markus Löffler (TU Dresden), Ling Ding (Leibniz IFW Dresden) for support with the SEM measurements, Dmitry Belyaev (TU Dresden) and Luis Antonio Panes-Ruiz (TU Dresden) for mask preparation and photolithography, Shadab Anwar (HZDR) for Atomic force microscopy measurements. We gratefully acknowledge helpful discussions with Prof. Wei Wang (HIT, Shenzhen) and Dr. Chao Zhou (HIT, Shenzhen).
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
L.B., T.H. formulated the task. T.H. carried out experimental work with contributions from B.I., and L.B. A.C. performed Zeta potential measurement with contributions from A.S. T.H., V.M., D.M., and L.B. formulated the mechanisms of 2D and 3D reflection. V.M. performed molecular-dynamics simulations of Janus particles, with contributions from F.N. T.H., V.M., D.M., and L.B. wrote the manuscript with the contribution from F.N., J.F., G.C. All authors have approved the final version of the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Communications Materials thanks the anonymous reviewers for their contribution to the peer review of this work. Primary handling editors: Larisa Florea and John Plummer. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Huang, T., Misko, V., Caspari, A. et al. Electrokinetic Janus micromotors moving on topographically flat chemical patterns. Commun Mater 3, 60 (2022). https://doi.org/10.1038/s43246-022-00282-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s43246-022-00282-y
- Springer Nature Limited