Abstract
Recently, transition-metal-catalyzed asymmetric dicarbofunctionalization of tethered alkenes has emerged as a powerful method for construction of chiral cyclic carbo- and heterocycles. However, all these reactions rely on facially selective arylmetalation of the pendant olefinic unit. Here, we successfully apply acylnickelation as the enantiodetermining step in the asymmetric nickel-catalyzed reductive carbo-acylation of aryl carbamic chloride-tethered alkenes with primary and secondary alkyl iodides as well as benzyl chlorides as the coupling partners, using manganese as a reducing agent. By circumventing the use of pre-generated organometallics, this reductive strategy enables the synthesis of diverse enantioenriched oxindoles bearing a quaternary stereogenic center under mild reaction conditions with high tolerance of a broad range of functional moieties.
Similar content being viewed by others
Introduction
Transition-metal-catalyzed dicarbofunctionalization consisting of a cyclization/cross-coupling cascade provides a powerful method to access various benzene-fused cyclic compounds starting from tethered alkenes1,2,3,4,5,6,7,8,9,10,11,12,13. Both redox-neutral2,3,4,5,6,7 and reductive8,9,10,11,12,13 strategies have been successfully applied in this reaction. Particularly, reductive dicarbofunctionalization represents a step-economical approach with high functionality tolerance through circumventing the use of organometallics as the coupling partner, and thus gains growing interest from organic chemists14,15,16,17,18,19,20,21,22,23,24. Notably, a few enantioselective two-component dicarbofunctionalizations were developed by Fu25, Brown26, Kong27,28,29,30, Shu31, Zhang32,33, and our group34 in recent years, but all these reactions rely on a facially selective intramolecular arylmetalation of the pendant olefinic unit as the enantiodetermining step (Fig. 1a). Therefore, establishing a reaction model with new retrosynthetic disconnections for asymmetric dicarbofunctionalization is highly desired for expansion of the reaction scope.
On the other side, methyl ester35, activated carbamate36, and carbamoyl chloride37,38 are known to undergo oxidative addition to low-valent Ni or Pd followed by intramolecular migratory insertion to an incorporated olefin in racemic fashion. The resultant cyclic alkyl metal species can be subsequently trapped by various nucleophiles in a redox-neutral pathway. Moreover, Takemoto et al. reported a one-component enantioselective carbo-acylation of alkenes with tethered carbamoyl cyanides39 (Fig. 1b). However, the reductive two-component carbo-acylation of appended alkenes involving termination with an electrophile remains still elusive15, let alone its enantioselective variant. Only very recently, Lautens et al. reported a redox-neutral asymmetric acyl-borylation of alkenes40.
Herein, we report a Ni-catalyzed asymmetric reductive carbo-acylation of aryl carbamic acid chloride-tethered alkenes with alkyl halides as the coupling partner, in which the intramolecular acylnickelation serves as the enantiodetermining step, to construct the oxindole motif bearing a challenging quaternary stereocenter featured in numerous biologically active compounds41 (Fig. 1c).
Results
Substrate scope of the racemic variant of Ni-catalyzed carbo-acylation
Our investigation began with the racemic version of the Ni-catalyzed carbo-acylation. Systematic screening of various reaction parameters allowed us to define the optimal reaction conditions as follows: NiBr2·glyme as catalyst (20 mol%), racemic Pyrox L1 as ligand (20 mol%) with Mn (2 equiv) as reductant in DMA/N-methyl morpholine (NMM; 4:1, 0.13 M) at 0 °C for 24 h (Supplementary Table 1). Under the optimal reaction conditions, we started to study the substrate spectrum by reacting various carbamic chloride-tethered alkenes 1a-p with n-pentyl iodide (2a) (Fig. 2). First, permutation of the geminal substitution of the pendant olefin was carried out. Gratifyingly, the desired products were obtained in moderate to good yields for both aliphatic (3aa-ea) and aromatic substituent (3fa), wherein the latter required much longer reaction time (96 h). In the case of mono-substituted olefin (R1 = H), the reaction failed to deliver the desired product due to β-hydride elimination. Moreover, electron-donating or -withdrawing groups on different position of the tethered aryl ring were well tolerated, yielding the corresponding products 3ga-na ranging from 51–91%. In the case of benzylic N-substitution (3oa and 3pa), moderate results were achieved with extended reaction time (96 h). Subsequently, we continued to evaluate the scope of this carbo-acylation reaction by reacting diverse alkyl halides (2b-ah) with the carbamoyl chloride 1a (Fig. 3). All the reactions using the primary alkyl iodides 2b-x proceeded smoothly under standard or slightly amended conditions, furnishing the products 3ab-ax in moderate to excellent efficiency. Of note is that good compatibility was observed for a wide range of functional moieties, including chloride (3ad and 3ap), nitrile (3af), acetal (3ag), sulfone (3ai), boronate (3aj), alcohol (3ak), aldehyde (3al), ketone (3am), imide (3an), ester (3ao-ay), tertiary amine (3aq), thioether (3ar), phenol (3as), silyl ether (3at), and internal olefin (3ax). The sterically more demanding secondary alkyl iodides 2z-ab also posed no problem, and good results were obtained for the products 3az-aab. Remarkably, the challenging benzylic chlorides 2ac-ah with high tendency to undergo homo-coupling also turned out to be suitable substrates, providing the products 3aac-3aah in moderate to good yields at room temperature with prolonged reaction time (48 h). Unsuccessful alkyl sources include tertiary alkyl iodides, perfluoroalkyl iodides, α-iododifluoroacetate, and alkyl bromides.
Optimization of the enantioselective carbo-acylation of alkenes
For optimization of the enantioselective version of the studied reaction, the aryl carbamoyl chloride 1 f and n-pentyl iodide (2a) were selected as the benchmark substrates (Table 1). We initially tested several Ni-precatalysts using the pyrox L2 as ligand (entries 1–6), and the best result was achieved in the case of NiBr2·glyme (entry 1). Next, various chiral ligands, including BOX, PyBOX, PHOX, and BINAP were examined, but all these reactions failed to deliver the desire product (Supplementary Table 3). When the pyrox with bulkier ligand arm (L1) was employed, the enantiocontrol was elevated to a moderate level (entry 7). Replacing Zn by Mn as the reductant improved the efficiency significantly (entry 8). Preforming the reaction in NMP or THF afforded only inferior results (entries 9 and 10). The use of ZnI2 as an additive led to a higher yield (entry 11). Next, systematic tuning of the Pyrox structure was carried out. Installation of two geminal methyl groups to the oxazoline ring (L3) showed detrimental effect (entry 12). The use of dimethyl oxazolinol L4 and its benzyl ether L5 as ligands did not provide significantly improved results (entries 13 and 14). Increasing the steric hindrance of the ligand arm (L6) afforded only a similar outcome (entry 15). Moreover, the chiral imidazoline L7 was also examined, giving only an inferior result (entry 16). Next, substitution on the pyridine ring of Pyrox (L8–12) was evaluated (entries 17–21), and it turned out that introduction of an electron-donating morpholine substituent (L12) could improve its performance, regarding both enantioselectivity and efficiency (entry 21). Finally, the best result (61% yield, 88% ee) was achieved (entry 24) through modifying the other reaction parameters, including solvent, temperature, reaction time, and catalyst loading (entries 22–24).
Substrate scope of the enantioselective carbo-acylation of alkenes
The scope of the asymmetric carbo-acylation was then investigated by varying the structure of both carbamic chlorides and alkyl halides (Fig. 4). It turned out that the geminal substituent of the terminal olefin has significant influence on the asymmetric induction. Bulkier alkyl group like ethyl and n-propyl gave rise to diminished enantioselectivities (3ca and 3da). In contrast, the level of enantiocontrol remained good in the case of methyl and p-methoxyphenyl as substituent (3ba and 3qa). Notably, the alkyl-substituted alkenes 1b-d were found to be much more reactive than their aryl analogues 1f and 1q, and thus required shorter reaction time (48 h). Next, various substituted aryl carbamic chlorides were surveyed, and the corresponding products 3ma and 3ra-ta were obtained in good enantiomeric excesses. The benzylic N-substituted carbamoyl chloride 1u was also successfully employed as precursor, giving the product 3ua in good enantiocontrol. Furthermore, primary and secondary iodides as well as benzyl chloride all proved to be competent substrates, yielding the products in good enantioselectivities with high tolerance of various functionalities.
Mechanistic studies
A number of control experiments were conducted to disclose the mechanism of this Ni-catalyzed carbo-acylation (Fig. 5). Concerning the enantiodetermining step, two pathways are hypothesized, which are enantioselective intermolecular alkylnickelation and intramolecular acylnickelation. The first assumption turned out to be less likely, because no hydroalkylation was observed for the carbamate 4 under standard reaction conditions, which incorporates an olefinic unit with similar electronic property to the one of the carbamic chloride 1a (Fig. 5a). In contrast, the stoichiometric reaction of the carbamoyl chloride 1c with Ni(COD)2 in the presence of ligand L12 followed by quenching with water afforded the hydroacylation product 6 in 60% ee, which is similar to the corresponding catalytic carbo-acylation, arguing for the intramolecular Ni(II)-mediated migratory insertion as the enantiodetermining step (Fig. 5b). Furthermore, no cross-coupling reaction occurred when treating methyl(phenyl)carbamic chloride (7) with n-pentyl iodide, suggesting that the addition of the alkyl group to the Ni center proceeds likely after the intramolecular migratory insertion step in the carbo-acylation (Fig. 5c). In the case of 6-iodohex-1-ene (2ai) as a radical clock, the cyclization to form the cyclopentane was found to precede the cross-coupling step to provide compound 3aai as the product, which indicates the generation of alkyl radicals starting from the corresponding iodides in this Ni-catalyzed reaction (Fig. 5d).
Relying on the aforementioned experimental evidence, we tentatively proposed the following mechanism (Fig. 6). Initially, Ni(0) is generated under reductive conditions, and then undergo oxidative addition with the carbamoyl chlorides 1 to deliver the Ni(II) complex I, which performs subsequently the enantiodetermining migratory insertion to the pendant olefin. Next, Mn-mediated reduction of the cyclic resultant Ni(II) species II enables the formation of the Ni(I) intermediate III. The following cage-bound (IV) oxidative addition with the alkyl halides 2 results in the generation of the Ni(III) species V. Upon facile reductive elimination from V, the carbo-acylation products 3 are provided. Finally, the released Ni(I)X is reduced by Mn to give the Ni(0) species for the next catalytic cycle.
Here, we developed a Ni-catalyzed carbo-acylation of tethered alkenes with both unactivated alkyl iodides and benzyl chlorides via a reductive strategy. This cyclization/cross-coupling cascade reaction furnishes diverse functional-group-rich 3,3-disubstituted oxindoles with formation of two C–C σ-bonds. The enantioselective version of this reaction was also realized by employing a chiral Ni–Pyrox complex as catalyst, enabling the construction of a quaternary stereocenter in moderate to high enantioselectivities. The preliminary mechanistic investigations indicate a Ni(II)-mediated intramolecular migratory insertion as the enantiodetermining step.
Methods
Synthesis and characterization
See Supplementary Methods (general information about chemicals and analytical methods, synthetic procedures, 1H and 13C NMR data, and HPLC data), Supplementary Figs. 12–36 (HPLC chromatograms), and Supplementary Figs. 37–244 (1H and 13C NMR spectra).
General procedure for racemic variant of the Ni-catalyzed carbo-acylation
Racemic oxazoline ligand L1 (8.2 mg, 0.04 mmol, 20 mol%), carbamoyl chlorides 1 (if solid, 0.2 mmol, 1.0 equiv), and alkyl iodides 2 (if solid, 0.4 mmol, 2.0 equiv) were added to a reaction tube equipped with a stir bar. In a nitrogen-filled glovebox, NiBr2·glyme (12.3 mg, 0.04 mmol, 20 mol%), and manganese dust (22 mg, 0.4 mmol, 2 equiv) were added to the mixture. The reaction tube was sealed and removed from the glovebox. Next, anhydrous DMA (1.2 mL) and NMM (0.3 mL) were added, followed by the addition of carbamoyl chlorides 1 (if liquid, 0.2 mmol, 1 equiv) and alkyl iodides 2 (if liquid, 0.4 mmol, 2.0 equiv) under the protection of nitrogen. Then the resulting mixture was stirred at corresponding temperature for 24–96 h (Supplementary Fig. 5). The reaction was quenched with sat. aq. NH4Cl solution (5 mL) and diluted with water (10 mL). The aqueous layer was extracted three times with EtOAc, and the combined organic layers were washed with brine (20 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. The residue was purified through column chromatography on silica gel (petroleum ether/ethyl acetate) to afford the desired product 3.
General procedure for asymmetric Ni-catalyzed carbo-acylation
Chiral oxazoline L12 (11.6 mg, 0.04 mmol, 20 mol%), carbamoyl chlorides 1 (if solid, 0.2 mmol, 1 equiv), and alkyl iodides 2 (if solid, 0.4 mmol, 2.0 equiv) were added to a reaction tube equipped with a stir bar. In a nitrogen-filled glovebox, NiBr2·glyme (12.3 mg, 0.04 mmol, 20 mol%), and manganese dust (22 mg, 0.4 mmol, 2 equiv) were added to the mixture. The reaction tube was sealed and removed from the glovebox. Next, anhydrous DMA (1.2 mL) and NMM (0.3 mL) were added, followed by the addition of carbamoyl chlorides 1 (if liquid, 0.2 mmol, 1 equiv) and alkyl iodides 2 (if liquid, 0.4 mmol, 2.0 equiv) under the protection of nitrogen. Then the resulting mixture was stirred at corresponding temperature for 24–96 h (Supplementary Fig. 6). The reaction was quenched with sat. aq. NH4Cl solution (5 mL) and diluted with water (10 mL). The aqueous layer was extracted three times with EtOAc, and the combined organic layers were washed with brine (20 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. The residue was purified through column chromatography on silica gel (petroleum ether/ethyl acetate) to afford the desired product 3.
Synthesis of starting materials and chiral ligand L12
For more details, see Supplementary Figs. 1–4.
Detailed optimization of the reaction conditions for asymmetric carbo-acylation
For more details, see Supplementary Tables 2–9.
Procedures of control experiments for mechanistic studies
For more details, see Supplementary Figs. 7–10.
Determination of the absolute configuration
For determination of the absolute configuration of triol product 3bac, see Supplementary Fig. 11. The stereochemistry of all the other products was assigned by assuming a common reaction pathway.
Data availability
The optimization of reaction conditions, the experimental procedure, and characterization data of new compounds are available within Supplementary Information. Any further relevant data are available from the authors upon reasonable request.
References
Giri, R. & KC, S. Strategies toward dicarbofunctionalization of unactivated olefins by combined heck carbometalation and cross-coupling. J. Org. Chem. 83, 3013–3022 (2018).
Phapale, V. B., Buñuel, E., García-Iglesias, M. & Cárdenas, D. J. Ni-catalyzed cascade formation of C(sp3)-C(sp3) bonds by cyclization and cross-coupling reactions of iodoalkanes with alkyl zinc halides. Angew. Chem. Int. Ed. 46, 8790–8795 (2007).
You, W. & Brown, M. K. Diarylation of alkenes by a Cu-catalyzed migratory insertion/cross-coupling cascade. J. Am. Chem. Soc. 136, 14730–14733 (2014).
Thapa, S., Basnet, P. & Giri, R. Copper-catalyzed dicarbofunctionalization of unactivated olefins by tandem cyclization/cross-coupling. J. Am. Chem. Soc. 139, 5700–5703 (2017).
KC, S., Basnet, P., Thapa, S., Shrestha, B. & Giri, R. Ni-catalyzed regioselective dicarbofunctionalization of unactivated olefins by tandem cyclization/cross-coupling and application to the concise synthesis of lignan natural products. J. Org. Chem. 83, 2920–2936 (2018).
Huang, D., Olivieri, D., Sun, Y., Zhang, P. & Newhouse, T. R. Nickel-catalyzed difunctionalization of unactivated alkenes initiated by unstabilized enolates. J. Am. Chem. Soc. 141, 16249–16254 (2019).
Koy, M., Bellotti, P., Katzenburg, F., Daniliuc, C. & Glorius, F. Synthesis of all‐carbon quaternary centers by palladium‐catalyzed olefin dicarbofunctionalization. Angew. Chem. Int. Ed. 58, 2375–2379 (2019).
Peng, Y., Yan, C.-S., Xu, X.-B. & Wang, Y.-W. Nickel‐mediated inter‐ and intramolecular reductive cross‐coupling of unactivated alkyl bromides and aryl iodides at room temperature. Chem. Eur. J. 18, 6039–6048 (2012).
Peng, Y., Xu, X.-B., Xiao, J. & Wang, Y.-W. Nickel-mediated stereocontrolled synthesis of spiroketals via tandem cyclization–coupling of β-bromo ketals and aryl iodides. Chem. Commun. 50, 472–474 (2014).
Kuang, Y., Wang, X., Anthony, D. & Diao, T. Ni-catalyzed two-component reductive dicarbofunctionalization of alkenes via radical cyclization. Chem. Commun. 54, 2558–2561 (2018).
Jin, Y. & Wang, C. Ni-catalysed reductive arylalkylation of unactivated alkenes. Chem. Sci. 10, 1780–1785 (2019).
Jin, Y., Yang, H. & Wang, C. Nickel-catalyzed reductive arylalkylation via a migratory insertion/decarboxylative cross-coupling cascade. Org. Lett. 21, 7602–7608 (2019).
Lin, Q. & Diao, T. Mechanism of Ni-catalyzed reductive 1,2-dicarbofunctionalization of Alkenes. J. Am. Chem. Soc. 141, 17937–17948 (2019).
García-Domínguez, A., Li, Z. & Nevado, C. Nickel-catalyzed reductive dicarbofunctionalization of alkenes. J. Am. Chem. Soc. 139, 6835–6838 (2017).
Zhao, X. et al. Intermolecular selective carboacylation of alkenes via nickel-catalyzed reductive radical relay. Nat. Commun. 9, 3488 (2018).
Anthony, D., Lin, Q., Baudet, J. & Diao, T. Nickel-catalyzed asymmetric reductive diarylation of vinylarenes. Angew. Chem. Int. Ed. 58, 3198–3202 (2019).
Shu, W. et al. Ni-catalyzed reductive dicarbofunctionalization of nonactivated alkenes: scope and mechanistic insights. J. Am. Chem. Soc. 141, 13812–13821 (2019).
Guo, L., Tu, H.-Y., Zhu, S. & Chu, L. Selective, intermolecular alkylarylation of alkenes via photoredox/nickel dual catalysis. Org. Lett. 21, 4771–4776 (2019).
Everson, D. A. & Weix, D. J. Cross-electrophile coupling: principles of reactivity and selectivity. J. Org. Chem. 79, 4793–4798 (2014).
Moragas, T., Correa, A. & Martin, R. Metal‐catalyzed reductive coupling reactions of organic halides with carbonyl‐type compounds. Chem. Eur. J. 20, 8242–8258 (2014).
Gu, J., Wang, X., Xue, W. & Gong, H. Nickel-catalyzed reductive coupling of alkyl halides with other electrophiles: concept and mechanistic considerations. Org. Chem. Front 2, 1411–1421 (2015).
Weix, D. J. Methods and mechanisms for cross-electrophile coupling of Csp2 halides with alkyl electrophiles. Acc. Chem. Res. 48, 1767–1775 (2015).
Wang, X., Dai, Y. & Gong, H. Nickel-catalyzed reductive couplings. Top. Curr. Chem. 374, 43 (2016).
Richmond, E. & Moran, J. Recent advances in nickel catalysis enabled by stoichiometric metallic reducing agents. Synthesis 50, 499–513 (2018).
Cong, H. & Fu, G. C. Catalytic enantioselective cyclization/ cross-coupling with alkyl electrophiles. J. Am. Chem. Soc. 136, 3788–3791 (2014).
You, W. & Brown, M. K. Catalytic enantioselective diarylation of alkenes. J. Am. Chem. Soc. 137, 14578–14581 (2015).
Wang, K., Ding, Z., Zhou, Z. & Kong, W. Ni-catalyzed enantioselective reductive diarylation of activated alkenes by domino cyclization/cross-coupling. J. Am. Chem. Soc. 140, 12364–12368 (2018).
Ma, T., Chen, Y., Li, Y., Ping, Y. & Kong, W. Nickel-catalyzed enantioselective reductive aryl fluoroalkenylation of alkenes. ACS Catal. 9, 9127–9133 (2019).
Li, Y., Ding, Z., Lei, A. & Kong, W. Ni-catalyzed enantioselective reductive aryl-alkenylation of alkenes: application to the synthesis of (+)-physovenine and (+)-physostigmine. Org. Chem. Front. 6, 3305–3309 (2019).
Ju, B., Chen, S. & Kong, W. Enantioselective palladium-catalyzed diarylation of unactivated alkenes. Chem. Commun. 55, 14311–14314 (2019).
Shu, X.-Z. et al. Highly enantioselective cross-electrophile aryl- alkenylation of unactivated alkenes. J. Am. Chem. Soc. 141, 7637–7643 (2019).
Zhang, Z.-M. et al. Enantioselective dicarbofunctionalization of unactivated alkenes by palladium‐catalyzed tandem heck/suzuki coupling reaction. Angew. Chem. Int. Ed. 58, 14653–14659 (2019).
Zhou, L. et al. Enantioselective difunctionalization of alkenes by a palladium‐catalyzed heck/sonogashira sequence. Angew. Chem. Int. Ed. 58, 2769–2775 (2019).
Jin, Y. & Wang, C. Nickel-catalyzed asymmetric reductive arylalkylation of unactivated alkenes. Angew. Chem. Int. Ed. 58, 6722–6726 (2019).
Zheng, Y.-L. & Newman, S. G. Nickel‐catalyzed domino heck‐type reactions using methyl esters as cross‐coupling electrophiles. Angew. Chem. Int. Ed. 58, 18159–18164 (2019).
Walker, J. A. Jr., Vickerman, K. L., Humke, J. N. & Stanley, L. M. Ni-catalyzed alkene carboacylation via amide C–N bond activation. J. Am. Chem. Soc. 139, 10228–10231 (2017).
Fielding, M. R., Grigg, R. & Urch, C. J. Novel synthesis of oxindoles from carbamoyl chlorides via palladium catalysed cyclisation–anion capture. Chem. Commun. 36, 2239–2240 (2000).
Anwar, U., Fielding, M. R., Grigg, R., Sridharan, V. & Urch, C. J. Palladium catalysed tandem cyclisation–anion capture processes. Part 8 [1]: In situ and preformed organostannanes. Carbamyl chlorides and other starter species. J. Organomet. Chem. 691, 1476–1487 (2006).
Yasui, Y., Kamisaki, H. & Takemoto, Y. Enantioselective synthesis of 3,3-disubstituted oxindoles through Pd-catalyzed cyanoamidation. Org. Lett. 10, 3303–3306 (2008).
Whyte, A., Burton, K. I., Zhang, J. & Lautens, M. Enantioselective intramolecular copper‐catalyzed borylacylation. Angew. Chem. Int. Ed. 57, 13927–13930 (2018).
Kaur, M., Singh, M., Chadha, N. & Silakari, O. Oxindole: a chemical prism carrying plethora of therapeutic benefits. Eur. J. Med. Chem. 123, 858–894 (2016).
Acknowledgements
This work is supported by National Natural Science Foundation of China (grant no. 21772183), Fundamental Research Funds for the Central Universities (WK2060190086), “1000-Youth Talents Plan” start-up funding, as well as University of Science and Technology of China.
Author information
Authors and Affiliations
Contributions
C.W. and Y.L. conceived and designed the experiments. Y.L. performed experiments and prepared the Supplementary Information. C.W. directed the project and wrote the paper. All authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Lan, Y., Wang, C. Nickel-catalyzed enantioselective reductive carbo-acylation of alkenes. Commun Chem 3, 45 (2020). https://doi.org/10.1038/s42004-020-0292-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s42004-020-0292-3
- Springer Nature Limited
This article is cited by
-
Ni-catalyzed carbamoylation of unactivated alkenes for stereoselective construction of six-membered lactams
Nature Communications (2022)
-
Catalyst-free carbosilylation of alkenes using silyl boronates and organic fluorides via selective C-F bond activation
Nature Communications (2021)
-
Palladium-catalyzed asymmetric carbamoyl-carbonylation of alkenes
Science China Chemistry (2021)