Abstract
Carbazole skeleton plays a significant role as a structural scaffold of many pharmacologically active compounds. Pyrazine-functionalized carbazole derivative was constructed by coupling 2-amino-5-bromo-3-methylaminepyrazine (ABMAP) into 3 and 6 positions of the carbazole ring. Multi-experimental methods were used, e.g., potentiometric, spectroscopic (ATR, UV, XRD powder,1H and13C NMR), electrochemical (cyclic voltammetry), and optical techniques, to receive the complete structural analysis, physicochemical (pKa, logP) and biological profile of a new carbazole derivative with acronym 3,6-PIRAMICAR. The interaction ability of the compound studied with potential cellular targets like Calf Thymus DNA (CT-DNA), or Bovine Serum Albumin (BSA) were also taken into account. Experiments showed the existence of strong binding, but no DNA or BSA cleavage was observed. The comparative analyzes of compounds anti-Candida action clearly show pH-dependent antifungal activity of 3,6-PIRAMICAR, which was strongly stimulated in the acidic media. Surprisingly, the titled compound turn out to be much more effective (14 times by MIC50; 8 times by MIC; c.a. 4 times by MFC) against Candida krusei than fluconazole at pH 4.
Similar content being viewed by others
The emergence of multidrug-resistant microorganisms, as well as fungal infectious diseases, is a major global problem, especially for immuno-deficient populations. The development of new antifungal agents in clinical trials is problematic inferior to the incidence of drug resistance, and the available antifungal agents are restricted. Their mechanisms are based on certain characteristics of the fungus in order to avoid biological similarities with the host1. Fungi in the Candida genus are the most common fungal pathogens which can colonize various host niches (stomach, vagina and oral mucosa) with varying ambient pH range2,3,4,5,6.
Carbazoles and derivatives with carbazole skeleton are currently tested intensively according to their antimicrobial properties which is directly relating with their structure or in more details with anaromatic N-heterocyclic ring inside7. Carbazole derivatives have been reported to be potential agents against tumor8 or opportunistic infections of AIDS9,10. The studies about high active DNA intercalators show the significance of the carbazole structural agents like planarity or aromaticity11,12. Interestingly, the mentioned parameters are described as responsible for the high affinity of carbazoles substituted at 3,6- or 2,7-positions by amine, amidine, or imidazoline groups to GC or AT-rich sequences of DNA13,14. However, chemistry of especially di-substituted 3,6-derivatives of carbazole is still not very extensively explored due to problems with synthesis of such compounds. Mainly nitrogen atom was a hot spot for carbazole derivatives14.
The first concept of the studies was to check the basic design structures assumptions to predict pharmaceuticals activity, like presented carbazole functionalized by pyrazines—our previous research objects. Consequently, the confirmation of the possibility of one direction antimicrobial properties transfers, from substituents to the main carbazole motif, was initially considered as a general project objective. The 3,6-PIRAMICAR properties of mimicking the pyrazinamide antibacterial action were also taken into account because it is typical to test at the same time antibacterial and antifungal activity. Interestingly, the proved lack of 3,6-PIRAMICAR antibacterial activity forced us to generate and applicate of a new research approach. Firstly, the pathogens were changed in tests based on the predicted similarity of unknown 3,6-PIRAMICAR to pyrazine derivatives antifungal action (selectivity against Candida albicans) studied in our previous research15,16,17,18. Additionally, we applied the pH conditions analogy (values lower than 5.5) for the pyrazinamide activation. Note, the synthesized 3,6-PIRAMICAR is the article object explored as novel alternative to fluconazole treatments. Antifungal activity and lack of antibacterial activity, on the other hand, can be an advantage because such compounds are more selective.
The pH profile of 3,6-di-(2-amino-3-(methylamino)pyrazino)-9H-carbazole (3,6-PIRAMICAR), see Fig. 1, and distribution diagrams of its species would provide the knowledge about the extent to establish the proper ionization state of compound (also considered as potent drug or pro-drug) presents at physiological pH. Electrochemistry of carbazole compounds is an object of interest mainly because of their applications19,20,21,22,23. However, it has been shown that the mechanism of biological action of some biologically active compounds is associated with their redox activity24,25. The aforementioned comparisons were expected to lead to solving research problems. The first one is related to design and determination of optimal conditions for conducting synthetic pathways to receive the 3,6-PIRAMICAR. The second is to receive the data confirming or refuting the thesis about high biological potential and activity of 3,6-PIRAMICAR as a representative of a class of symmetrical carbazole derivatives. Moreover, biological evaluation of the compound was assessed by in vitro assays to explore anticancer and antimicrobial activity. The cytotoxic effect was determined for two cancer cell lines (i.e., non-small cell lung cancer—A549 and human colorectal cancer—HCT116). The antifungal activity was determined using Candida albicans, Candida glabrata, and Candida krusei strains of fungi at various ambient pH values.
Herein, we report in detail and for the first time to the best of our knowledge, the synthesis, physicochemical properties, biological activity, and application potential of 3,6-PIRAMICAR.
Results and discussion
Proton dissociation processes
A neutral (unionized) molecule of 3,6-PIRAMICAR contains potentially six (or eleven, together with N-heterocyclic atoms) basic sites (Fig. 1). The knowledge about the potential protonation places (atoms) in structure as well as ionization state of compound active (neutral or ionized) in solution at different pH is crucial. The scientific reports prove that pyrrole protonation overlaps on an α-carbon atom26. In the case of indole derivatives—β-carbon27 is preferred place to accept the proton. The mentioned proofs suggest that for higher analog of pyrrole (indole) ring—carbazole, second side of the pyrrole ring should be blocked and as the first, the N atom of indole should be protonated. Moreover, the protonation process of N-heteroaromatic atoms in derivatives typically described in the literature28 occurs in very strong acids like concentrated (70%) perchlorate acid. The protonation reaction of 3,6-PIRAMICAR was prepared in the mentioned conditions and registered spectrophotometrically as evidenced by the reversible change presented in Supplementary Information Fig. S1A online. The principal bands in the UV spectrum proved that the protonation process occurs on N atoms. Protonation points correlate very well with Hammett constants (H0), which were, therefore, used to estimate basicity (see Supplementary Fig. S1B online). This provides an upper limit for the basic strength of the N-heteroaromatic atoms of a studied compound, in which equilibrium protonation occurs preferentially on carbon and for which nitrogen basicity is not directly measurable29. To obtain the pKa values of N-heteroaromatic atoms, the Hammett acidity function was implied to the UV-spectrophotometric titrations of 3,6-PIRAMICAR samples by using 70% HClO4 as a titrant. The values of pKa1, pKa2, and pKa3 constants, respectively, were calculated based on modified Eq. (2), and their values were summarized in Table 1. It can be seen (Fig. S1B) that the correlation between experimental and fitting data line obtained from calculations at 232 nm are in a reasonably good agreement. The hybrid potentio-spectrophotometric titration method was used to determine the protonation constants of N-aliphatic atoms. The recorded pH-dependent spectra (Fig. S2 in SI) revealed some of the proton dissociation processes at wide range pH; the calculated protonation pKa constant values are reported in Table 1. Titrations showed characteristic spectral changes in the wavelength range of 200–450 nm. 3,6-PIRAMICAR displays intense absorption bands in all the protonation forms at 245 nm, 292 nm, 314 nm, and 331 nm, which are assigned to n → π* transitions. The determined pKa values demonstrate that the proton dissociation processes overlap, and the neutral form predominates in the physiological pH range, as illustrated in Supplementary Fig. S3B. Figure 2A shows all possible protonation sites for all nitrogen acceptor atoms occurring in the 3,6-PIRAMICAR molecule. The value of pK1 can most presumably be attributed to the deprotonation of the 2°amine unit (inside of two heteroaromatic rings), while pK2 belongs to the deprotonation of the 2°amine unit (between the aliphatic substituent and heteroaromatic ring). Our assumptions are based on the charge distribution map determined using the Hückel method, as shown in Fig. 2B.
3,6-PIRAMICAR contains two acidic amide groups (–NH–) and one basic amine group (–NH2), which correspond to pKa1, pKa2, and pKa3 respectively. The amine group can attach a proton, while the amide group is able to detach a proton at specific pH conditions. The pKa of the 3,6-PIRAMICAR was determined by potentiometric titration, and the titration curve was shown in Fig. S3. Results indicate that the pKa determined by potentiometric titration agrees with most spectroscopic data. The titration curves obtained for 3,6-PIRAMICAR (Fig. S3A) show three potential changes. In the presented figure, there is a comparison of experimental data (black squares) and data obtained from the calculation by using CVEQUID program (solid line). It can be seen that the correlation between these two results is, in fact, very good for each compound studied.
Redox profile
The influence of the environment on the electrochemical characteristics of compounds included carbazole skeleton turned out to be extremely interesting. Carbazole compounds oxidize, forming the cation radicals. Their strongly π-excessing rings tend to undergo polymerization after oxidation30,31. As the carbazole cation radical is very unstable, it can couple with either another cation radical or with a parent molecule, forming the more stable di-carbazyl (dimer). The oxidation of carbazole is rather complex and has the characteristics of an electrochemical-chemical-electrochemical (ECE) process in which one electron is involved per parent molecule. Interestingly, the carbazole amine derivatives show a slightly different nature of oxidation processes32. The presence of additional nitrogen atoms supplying electrons in the molecule reduces the initial oxidation potential compared to carbazole33. 3,6-di-amino-9H-carbazole, used as a substrate for the synthesis of 3,6-PIRAMICAR, in an aprotic solvent, showed a small oxidation signal at the potential of Ea1 = 0.480 V and an intense anode peak at the potential value of Ea2 = 1.530 V (Fig. S4A in SI). The second peak of the reduction process appeared only when registering the first scan. During the next cycles, the first reduction peak also disappears. Reregistering of both signals in their initial form is only possible after cleaning the working glassy carbon (GC) electrode. The voltammogram registered for the second substrate used for the synthesis of 3,6-PIRAMICAR, i.e., 2-amino-5-bromo-3-(methylamino)pyrazine (ABMAP), showed two irreversible oxidation processes (Fig. S4B in SI). The values of anode potentials were 0.925 V and 1.408 V for Ea1 and Ea2, respectively. These peaks did not change their positions or intensities during the recording process of subsequent measurement scans.
In the aprotic solvent, two oxidation peaks were observed for the 3,6-PIRAMICAR compound (Fig. S5). The impact of scanning rate, in the range from 25 to 500 mV s−1, on the intensity and location of redox processes was investigated. The increase in the speed of recording redox processes seemingly caused an increase in the intensity of signals and shifted them towards more positive potential values. However, due to high background currents occurring at high scanning rates, the value of 100 mV s−1 was chosen for measurements. The values of oxidation potential at this scan rate were of Ea1 = 0.910 V and Ea2 = 1.483 V. These values are very similar to the value of the potentials of anode processes registered for 2-amino-5-bromo-3-(methylamino)pyrazine.
Moreover, the peaks generally maintain their intensity during the recording process of subsequent voltammograms. These factors indicate that the group responsible for signaling redox processes in the 3,6-PIRAMICAR molecule are mainly pyrazine substituents, not the carbazole moiety itself. Our results have shown that the environment (pH of the solution) has a strong impact on the redox activity of the compound. The addition of subsequent portions of 0.1 M tetrabutylammonium hydroxide (TBAH) solution (Fig. S6A) first caused the oxidation peaks to overlap each other, and then reduce signals intensity. In turn, the electrode process in the presence of 0.1 M methanesulfonic acid (MSA) causes precipitation formation in the measurement cell (Fig. S6B). Interestingly, even after the addition of one portion (10 µL) of TBAH, in consecutive measurements (without changing conditions), gradual changes were observed (Fig. 3A). The voltammogram recorded immediately after adding the base and mixing the solution by passing argon, showed two oxidation peaks approaching to each other. On the following recorded scans, a gradual disappearance of these signals was observed. Specific reduction of signal intensity in subsequent scans was also observed in the case of 3,6-di-amino-9H-carbazole (Fig. S4 in SI). This may suggest an increasing role of the aminecarbazole moiety in undergoing redox processes. For unsubstituted carbazoles, the 3, 6, and 9 positions are readily available as coupling sites. Substitution of the molecule in 3 and 6 positions eliminates their participation in the dimerization process, and thus the only likely coupling sites remain the 9(N) and optionally positions 1 or 8, respectively30,31,32. The type of dimer formed during oxidation depends on proton concentration in the area around the electrode, the status of the carbazole nitrogen (protonated or unprotonated), and the electron densities at the remaining reactive coupling sites33,34. The addition of tetrabutylammonium hydroxide solution increases the possibility of dimerization at 9-position of carbazole (Fig. 3B), by reducing the concentration of protons. The changes observed in the alkaline environment demonstrated the influence of both pH and kinetics on the oxidation process. Subsequent reactions of both cation radicals and dimers formed during the oxidation process, leading to polymerizationand the formation of more complex products that do not show oxidation signals seem to be possible35.
Interactions with biomolecules
The binding affinity of 3,6-PIRAMICAR to Calf Thymus-DNA(CT-DNA) as well as to Bovine Serum Albumin (BSA) was studied by electronic absorption microtitrations with biomolecules treated as titrants. The representative UV spectra of isolated 3,6-PIRAMICAR and its adducts with CT-DNA and BSA are given in Fig. 4. The complete number of titration spectra obtained together with the initial spectra of biomolecule titrants was collected in Supplementary Figs S7–S12 online.
The increasing DNA, as well as BSA concentrations, led to the substantial decrease in the absorption of 3,6-PIRAMICAR with slight bathochromic effects at wavelength region about 250 nm for both experiment types. The intercalation mode of compound interactions with DNA is usually presented in the literature by hypochromic and bathochromic effects34 observed during electronic absorption titrations. The absorption band intensity for 3,6-PIRAMICAR at 252 nm (7,740 dm3 mol−1 cm−1) and 333 nm (6,728 dm3 mol−1 cm−1) was decreasing with increasing of DNA concentrations. Based on the above, we observed the mentioned phenomena about hypochromic and redshift effects between 250 and 290 nm (Fig. 4A, C) in the presence of DNA or BSA interacted with 3,6-PIRAMICAR. The results obtained for 3,6-PIRAMICAR-DNA system studied, together with the knowledge about 3,6-disubstituted carbazole derivatives as compounds more specific for the GC sequence (than for AT)13, allow to suggest that the intercalation mode is quantitatively more competitive with groove binding.
It is worth noting that the intrinsic binding constants (Kb) of 3,6-PIRAMICAR with DNA and with BSA were determined from the decay of the absorbance monitored for compound studied. These parameters Kb were evaluated from the Benesi-Hildebrand Eq. 36. The Kb value is related to change in absorbance [Ao/(A − Ao)] for pure compound studied (Ao); for its adduct with a biomolecule (A) versus c−1BIOMOLECULE. The higher value of binding constant obtained for 3,6-PIRAMICAR-BSA system (1.19·105 M−1) proves the higher 3,6-PIRAMICAR affinity to association/bind with albumin than with CT-DNA (4.3·103 M−1). Moreover, the presence of three isosbestic points for both titration types experiments can be observed (Fig. 4), which indicates the strong interactions between an aromatic 3,6-PIRAMICAR chromophore and each biomolecule studied.
Biological evaluation
Fungal infections occur all over the world in parallel with the increasing number of people with immunosuppressed. Fungi in the Candida genus are the most common fungal pathogens which can colonize various host niches (stomach, vagina, and oral mucosa) with varying ambient pH range1. Drug molecules with the carbazole framework possess a wide range of biological and pharmacological activities37,38,39,40. Thus, the antiproliferative activity of 3,6-PIRAMICAR and its substrates was evaluated against human non-small cell lung cancer (A549) and colorectal carcinoma cell line (HCT116) for 72 h, using MTT assay. Investigated compounds, tested in the 250–0.4 μM concentration range on both tumor cell lines showed no anticancer activity (Table S1 in SI). Next, antimicrobial potency towards fungal species was investigated by the broth serial dilution technique. Table 2 outlines MIC50 and MIC susceptibility results, including MFC of compounds, tested at pH values of 4, 5.5, and 7, respectively, for all tested yeast strains.
Irrespective of pH, the 3,6-PIRAMICAR compound is more active than its substrates. At pH 7, none of the isolates was susceptible to investigated compounds. In general, with a progressive reduction at pH after 24 h of treatment, a significant decrease in MIC was evident with 3,6-PIRAMICAR and with 3,6-NH2, in comparison to fluconazole whose activity decreased with a descent at pH (Fig. 5, Figs S13–S15 in SI)41.
ABMAP was not active against any of the tested strains. The MIC50s of 3,6-PIRAMICAR for Candida glabrata and Candida krusei were 30.88, 10.05 μM, respectively, while the MICs values for these strains were 62.5 and 31.25 μM, respectively. Candida albicans was the most susceptible to 3,6-PIRAMICAR at pH 5.5 with MIC50 35.36 μM, while MIC was 250 μM. The highest antifungal activity of 3,6-PIRAMICAR was shown against C. krusei at pH 4, followed by MFC 62.5 μM. Compounds were also tested on fluconazole-resistant clinical isolates of different Candida species (Table S2 and S3. in SI). Out of the all tested structures, 3,6-PIRAMICAR was the most active at pH 4 toward C. krusei (74) with MIC50 98.97 μM.
Photosensitive nature
The hydro- or lipophilic character and ionization ability are the physicochemical properties used to predicts the general pharmaceutical form dominating at particular conditions. The experimental data, as well as detailed calculation parameters related to log(P)/(D) of 3,6-PIRAMICAR obtained as a result of the spectroscopic investigations, were presented in graphics and collected summarized in Supplementary Information Figs S16–S20 online. The 3,6-PIRAMICAR partition (distribution) coefficient results were also presented in Table S4 of SI. They confirmed the 3,6-PIRAMICAR properties with strong similarity to those of known lipophilic drugs (value of logP above 1.1) characterized by the high value of logP like metoprolol (selective bet-1 receptor blocker used in the treatment of cardiovascular system diseases; logP 1.87), bisoprolol (selective beta-1 adrenergic receptor antagonist with antihypertensive activity; logP 1.87) or amphetamine (poison, synthetic drug; logP 1.85)42. Interestingly, the photosensitive properties of 3,6-PIRAMICAR were revealed in our measurements. Its aqueous and octanol solutions freshly prepared exhibited the fluorescent glows, which were visible, especially in the case of the dilution process. Moreover, the radical change of colors for both 3,6-PIRAMICAR solutions exposed to UV light was observed (Fig. 6A). This observed phenomenon resembles the behavior of known fluorescent dyes like fluorescein and eosin used in the imaging process. Based on the above, it could be assumed that the compound tested might have been applied, for example, in microscopy as a marker in cells, nucleic acids, proteins, antibodies, etc. or in geology and also in environmental protection (to track watercourses and leaks from pipelines). Fluorescence microscopy (Fig. S15 in SI; Fig. 6B) and flow cytometry (Fig. 7) revealed that 3,6-PIRAMICAR accumulate after 24 h of incubation in Candida krusei cells cultured in broth RPMI 1640 or solid YPD medium buffered to pH 4 as evidenced by green fluorescence.
Flow cytometric assay
Morphological changes of C. krusei cells induced by 3,6-PIRAMICAR were observed by flow cytometric dot plot analysis (Fig. 7B, C) by comparing cell profiles of the FSC as cell size indicator and SSC as granularity indicator. There was a significant increase of cell number with lower FCS values relative to the population of untreated cells (35.1 ± 3.2%)in cells exposed to 3,6-PIRAMICAR (82.1 ± 3.1%) and fluconazole (68.7 ± 2.1%). Shrinkage of the cells is occurred by increased membrane permeabilization by pore, leading to loss of cytosolic ions or intracellular components resulting in cell cycle arrest43.
To elucidate the mode of antifungal action of compounds treatment, we investigated the effect of 3,6-PIRAMICAR and fluconazole on the membrane's structure of C. krusei using propidium iodide influx assay (Fig. 7B). Propidium iodide (PI) is a DNA intercalating fluorochrome used for viable cell exclusion that only penetrates cells with the disruptive plasma membrane44.In cells exposed to treatment at pH 4, increased fluorescent intensity (31.1 ± 5.3%) by flow cytometry was observed with 62.5 μM 3,6-PIRAMICAR compared to untreated cells (1.9 ± 4.2%). However, this effect was lower than with fluconazole (81.4 ± 6.12%). These data indicate that 3,6-PIRAMICAR reduces the integrity of cell membranes at acidic pH values. Based on that, it can be proposed that 3,6-PIRAMICAR interacts with fungal cells membranes via electrostatic interaction because of its cationic charge what results in membranes cell damage. The loss of cell membrane integrity due to the action of 3,6-PIRAMICAR could cause plasma membrane depolarization and cell death.
Methods
The idea of designing the symmetrically substituted carbazole as a central pharmacophore segment tethered with one-type pyrazine was related to stimulation of with desired pharmacological behavior. The lipophilicity control in the proposed scaffold could be accomplished with the choice of appended N-heteroaromatic pyrazine. The common approach to achieve the symmetrically substituted carbazole allowed to obtain the product (4) with acronym 3,6-PIRAMICAR. Herein, we report an efficient four-steps one component synthesis of novel carbazole motif 3,6-disubstituted by pyrazine. To generalize the reaction, the 3,6-diiodo-9H-carbazole was blocked by tosyl chloride (TsCl) on N-carbazole atom in the initial step to allow reactions with pyrazine derivatives. All the reactions proceeded reasonably well and the products (1)–(4) obtained were rigorously purified (> 95%) over silica gel column chromatography. Pyrazines functionalized carbazole were fully characterized by their1H NMR, ATR and mass (EI-MS) spectral data.
The main assumption, reactions and precursors of the synthetic pathway were presented together in Fig. 8. The experimental details together with structural analyses as well as the adequate procedure chemical and biological conditions were clearly explained and summarized in Supporting Information file (SI), Figs. S21–S29.
Chemical evaluation
The structural analyses of 3,6-PIRAMICAR synthesized were prepared by using four independent analytical techniques. The first one, elemental analysis leads to obtain the percentage compositions of the elements by an element analyzer Carlo Erba EA 1108 CHNS. The second, MS leads to receive the mass spectrum (Fig. S21 in SI) of the compound studied (positive polarization) which was registered on MALDI-TOF Biflex III apparatus (Brücker). The third one, ATR spectroscopy makes possible to record the oscillatory spectra of 3,6-PIRAMICAR in the wave number range 4,000–450 cm-1 on a Spectrum Two FT-IR instrument (Perkin Elmer). Here, the solid states of 3,6-PIRAMICAR compound studied together with its precursors, and additional reference samples like 9H-carbazole, 3,6-di-amine-9H-carbazole and 2-amino-5-bromo-3-(methylamino)pyrazine (ABMAP) were used to analyze similarities and differences in signals observed between substances selected. Finally,1H,13C NMR, XRD powder spectra of 3,6-PIRAMICAR were collected in Supporting Information file (see Supplementary Figs S22–S28 online, respectively). Both NMR spectra were obtained by AVANCE 400 MHz and D2 PHASIER spectrometers (Brüker) at the Faculty of Chemistry (University of Gdańsk). Additionally, the biomolecules (DNA and BSA) intermolecular interactions studies were monitored by electronic spectra recorded on an Evolution 300 spectrophotometer in the range of 200–450 nm (spectral bandwidth 2 nm; double beam mode with zero-baseline correction). Furthermore, two spectroscopic experiments were carried out for 3,6-PIRAMICAR partition coefficient determination, which experimental conditions, as well as their graphical forms of results, were included in the Supporting Information. We used a jacketed titration cell connected to a constant temperature water bath set to 25.0 ± 0.1 °C in all spectroscopic measurements performed.
The electrochemical measurements were carried out in a single-compartment, three-electrode cell with an Autolabpotentiostat/galvanostat PGSTAT204 (MetrohmAutolab B.V., The Netherlands) controlled by the Nova software. For the measurement of electrochemical characteristics, a concentrated solution of 3,6-PIRAMICAR with approximately 0.5 mM was used. Concentrations of substrate solutions (3,6-di-amine-9H-carbazole and 2-amino-5-bromo-3-methylaminopyrazine) were about 1 mM, respectively. The analyzed compounds were dissolved in acetonitrile together with the 0.1 M tetrabutylammonium perchlorate (TBAP). The working electrode was glassy carbon electrode of 2 mm diameter, carefully polished before each experiment using 0.5 μm alumina suspension (Buehler). The values of potential were measured versus a double junction silver/silver chloride (Ag/AgCl) reference electrode with the aqueous sodium chloride (1 M NaCl) solution in 0.1 M TBAP in methanol. The platinum wire served as an auxiliary electrode. Solutions of metanesulfonic acid and tetrabutylammonium hydroxide were used to determine the effect of pH on electrochemical characteristics. All solutions prepared were degassed by passing argon. All measurements were performed at least two times independently at 25.0 (± 0.1 °C).
The procedure of potentiometric and spectrophotometric detailed description was included in SI.
Affinity to biomolecules assay
UV–Vis titration assay was carried out in the tris-(hydroxymethyl)-amino methane (Tris–HCl) buffer solution (5 mM Tris–HCl, 50 mM NaCl, pH 7.39). A solution of CT-DNA (Sigma-Aldrich)in Tris–HCl gave a ratio of UV–Vis absorbance of 1.8–1.9 at 258 and 280 nm as standard procedure to indicate that DNA is sufficiently free of protein. Titrations were done automatically by using the CerkoLab microinjector at 25 °C and in the range 200–450 nm (Figs. S7–S10, respectively). Electronic absorption spectra were recorded after each addition of different amounts of individual biomolecule solutions.
The concentration of freshly prepared CT-DNA was calculated based on a value of absorbance at 258 nm (Fig. S11; SI) and based on the calibration curve [ɛDNA 6,600 (base pairs) M−1.cm−1]45,46. The 3,6-PIRAMICAR was dissolved in Tris–HCl to give 10 mL of the solution at mass concentration equal 2.36·10–4 M, which was used as an initial and pure carbazole derivative sample for both types of titration.
A 1.5 mL solution containing the appropriate concentration of 3,6-PIRAMICAR was titrated by successive additions of a 1.92·10–5 M stock solution of Bovine Serum Albumin (BSA). The concentration of freshly prepared BSA (titrant solution) was established based on the calibration curve obtained at 278 nm (Fig. S12; SI).
Biological evaluation
Strains and growth conditions of microorganisms
The antifungal activity was determined using the commercial strains: Candida albicans (ATCC 10231), Candida glabrata (DSM 11226) and Candida krusei (DSM 6128) and clinical fluconazole-resistant isolates from patients of the Children’s Memorial Health Institute in Warsaw (strain numbers are given in brackets): Candida glabrata (465), Candida krusei (2), Candida krusei (35), Candida krusei (74), Candida krusei (176) collected in years 2011 and 2012. Stock cultures of all strains were stored at − 80 °C with 15% v/v glycerol as cryopreservative. In each experiment, the yeast was subcultured on YPD agar plates (1% yeast extract, 2% peptone,2% glucose, and 2% agar) at 37 °C for 24 h, then inoculated in RPMI 1640 medium (Corning) supplemented with 1 M MOPS (3-N morpholinopropane sulfonic acid, EMD Chemicals) for 24 h at 37 °C under agitation at 180 rpm. After fungi incubation, inoculum amounting 105 CFU/ml were added on YPD agar plates or RPMI 1640 medium, both buffered to pH 4.0, 5.5, or 7.0 with hydrochloric acid. Unless stated otherwise, all media and consumables were purchased from Sigma-Aldrich.
Antifungal activity
The antifungal activity was determined by the broth dilution method according to guidelines of the Clinical and Laboratory Standards Institute (M27-A3 document). RPMI 1640 medium was used for preparing serial dilutions of the test and reference compound using the 96-well microtiter plates. The final concentration of the solvent did not exceed 2.5% for DMSO and did not affect the growth of microorganisms. The inoculum amounting 105 CFU/ml of all studied microorganism prepared from 24 h cultures of fungi grow at 37 °C were added to each dilution in a 1:1 ratio. Minimum Inhibitory Concentration (MIC) was established visually as the lowest concentration where no growth was observed after incubation for 24 h at 37 °C. To determine the lowest drug concentration that inhibits 50% of microorganisms’ growth, the microtitration plate was read with a microplate plate reader (Asys UVM 340 Microplate Reader, Biochrom). The absorbance was measured at 660 nm. Additionally, to obtain minimal fungicidal concentration (MFC), a 10 µl volume of suspension was taken from each well and transferred to a 48-well plate with YPD medium and incubated for 24 h at 37 °C. The MFC values were interpreted as the lowest concentration, where no growth of fungal was observed. Fluconazole was used as control antimicrobial agent.
Analysis of fungi by fluorescence microscopy
Candida krusei was incubated with the presence or absence of 10 µM 3,6-PIRAMICAR on YPD agar plates or in broth RPMI 1640 medium, both buffered to pH 4 with hydrochloric acid for 24 h in 37 °C. Cell colonies from agar plates were transferred to the slide and imaged under × 20 magnification using a fluorescence microscope (IX83 Inverted Microscope, Olympus) connected to XC50 digital color camera (Olympus) with U-FGWA filter (Olympus). Cells in broth medium were washed three times in 0.05 mM potassium phosphate buffer (pH 7.4), centrifuge at 1,000 rpm for 5 min and fixed with 3.7% paraformaldehyde for 20 min at room temperature in the dark. Cells were washed two times with potassium phosphate buffer, immersed in 90% glycerol v/v, and imaged following the same procedures described for solid medium.
Morphological changes of fungi
Candida krusei cells (105 CFU/ml) were treated in RPMI 1,640 buffered with hydrochloric acid to pH 4 with either 10 µM 3,6-PIRAMICAR or 250 µM fluconazole under the agitation of 180 rpm for 4 h at 37 °C. After incubation, the cells were harvested by centrifugation (1,000 rpm, 5 min 4 °C) and resuspended in 0.05 mM potassium phosphate buffer (pH 7.0). Morphological changes of cells induced by treatment were assessment by illuminating cells by 480 nm light from an argon ionic laser and determining their position on a forward scatter (FSC) versus side scatter (SSC) contour plot using the Guava easyCyte 8 flow cytometer (Merck Millipore).
The change in fungal membrane permeability
Fungal membrane permeabilization was determined using the propidium iodide influx assay. Candida krusei cells (105 CFU/ml) were treated with either 10 µM 3,6-PIRAMICAR or 250 µM fluconazole in RPMI 1640 buffered with hydrochloric acid to pH 4 under the agitation of 180 rpm for 4 h at 37 °C. Cells were harvested by centrifugation (1,000 rpm, 5 min, 4 °C), washed in 0.05 mM potassium phosphate buffer (pH 7.4), and stain in the dark with 10 µM propidium iodide for 15 min at room temperature. A stock solution of 1.0 mg of PI per ml was prepared in deionized water and stored protected from light in the refrigerator. The uptake of propidium iodide into C. krusei cells was detected using a Guava easyCyte 8 flow cytometer (Merck Millipore) and analyzed by FlowJo v10 software.
Conclusions
In summary, the complete structural, physicochemical and microbiological 3,6-PIRAMICAR profile together with its interactions ability against potent cellular targets were reported in details. The received data enable conditions optimization (pH 4), which lead to achieving the confirmed 3,6-PIRAMICAR activity against Candida krusei. The fungal cells membranes destruction observed in tests with 3,6-PIRAMICAR is related to its lipophilic character (logP above 1.1). In contrast to studies with fluconazole (representant of azoles drugs), the stimulation of 3,6-PIRAMICAR antifungal activity was noted after the decrease of pH values in systems studied. Additionally, 3,6-PIRAMICAR turn out to be more active against Candida species compared to its structural precursors, 3,6-diamine-9H-carbazole (3,6-NH2) and 2-amino-5-bromo-3-methylamine-pyrazine, respectively. Interestingly, the time-dependent experiments data were analyzed to note some subtle similarities between antifungal action established for 3,6-PIRAMICAR and 3,6-NH2.
This paper demonstrates also the 3,6-PIRAMICAR interaction possibilities with CT-DNA and BSA by using multi-experimental techniques. The compound studied shows a higher ability to bind BSA (1.9·105 M−1) than with DNA (4.3·103 M−1), respectively. The experimental results also indicate that a stable adduct is formed between the synthesized compound and proteins with dynamic quenching. As a perspective, we believe that our results can be considered as an initial for the research of executing the detailed mechanism of 3,6-PIRAMICAR antifungal action.
References
Spampinato, C. & Leonardi, D. Candida infections, causes, targets, and resistance mechanisms: traditional and alternative antifungal agents. Biomed. Res. Int. 2013, 204237 (2013).
Chew, S. Y. & Than, L. T. L. Vulvovaginal candidosis: contemporary challenges and the future of prophylactic and therapeutic approaches. Mycoses 59, 262–273 (2016).
Oerlemans, E. F. M. et al. Impact of a lactobacilli-containing gel on vulvovaginal candidosis and the vaginal microbiome. Sci. Rep. 10, 7976 (2020).
Guinea, J., Sánchez-Somolinos, M., Cuevas, O., Peláez, T. & Bouza, E. Fluconazole resistance mechanisms in Candida krusei: the contribution of efflux-pumps. Med. Mycol. 44, 575–578 (2006).
Orozco, A. S. et al. Mechanism of fluconazole resistance in Candida krusei. Antimicrob. Agents Chemother. 42, 2645–2649 (1998).
Berkow, E. L. & Lockhart, S. R. Fluconazole resistance in Candida species: a current perspective. Infect. Drug Resist. 10, 237–245 (2017).
Kaplancikli, Z. Synthesis of some novel Carbazole derivatives and evaluation of their antimicrobial activity. Marmara Pharm. J. 3, 105–109 (2011).
Hu, L. et al. Synthesis and structure−activity relationships of carbazole sulfonamides as a novel class of antimitotic agents against solid tumors. J. Med. Chem. 49, 6273–6282 (2006).
Tanious, F. A. et al. Effects of compound structure on carbazole dication−DNA complexes: tests of the minor-groove complex models. Biochemistry 39, 12091–12101 (2000).
Tanious, F. A., Ding, D., Patrick, D. A., Tidwell, R. R. & Wilson, W. D. A new type of DNA minor-groove complex: carbazole dication–DNA interactions. Biochemistry 36, 15315–15325 (1997).
Catoen-Chackal, S. et al. DNA binding to guide the development of tetrahydroindeno[1,2-b]pyrido[4,3,2-de]quinoline derivatives as cytotoxic agents. J. Med. Chem. 47, 3665–3673 (2004).
Manna, A. & Chakravorti, S. Modification of a styryl dye binding mode with calf thymus DNA in vesicular medium: from minor groove to intercalative. J. Phys. Chem. B 116, 5226–5233 (2012).
Tanious, F. A. et al. Sequence-dependent binding of bis-amidine carbazole dications to DNA. Eur. J. Biochem. 268, 3455–3464 (2001).
Głuszyńska, A. Biological potential of carbazole derivatives. Eur. J. Med. Chem. 94, 405–426 (2015).
Chylewska, A., Sikorski, A., Ogryzek, M. & Makowski, M. Attractive S⋯π and π–π interactions in the pyrazine-2-thiocarboxamide structure: experimental and computational studies in the context of crystal engineering and microbiological properties. J. Mol. Struct. 1105, 96–104 (2016).
Chylewska, A. et al. Crystalline pyrazine-2-amidoxime isolated by diffusion method and its structural and behavioral analysis in the context of crystal engineering and microbiological activity. RSC Adv. 6, 64499–64512 (2016).
Głębocka, A., Raczyńska, E. D., Chylewska, A. & Makowski, M. Experimental (FT-IR) and theoretical (DFT) studies on prototropy and H-bond formation for pyrazine-2-amidoxime. J. Phys. Org. Chem. 29, 326–335 (2016).
Maji, B., Kumar, K., Kaulage, M., Muniyappa, K. & Bhattacharya, S. Design and synthesis of new benzimidazole-carbazole conjugates for the stabilization of human telomeric DNA, telomerase inhibition, and their selective action on cancer cells. J. Med. Chem. 57, 6973–6988 (2014).
Mengoli, G., Musiani, M. M., Schreck, B. & Zecchin, S. Electrochemical synthesis and properties of polycarbazole films in protic acid media. J. Electroanal. Chem. Interf. Electrochem. 246, 73–86 (1988).
Kula, S. et al. Synthesis and photophysical properties of novel multisubstituted benzene and naphthalene derivatives with high 2D-π-conjugation. Opt. Mater. 47, 118–128 (2015).
Soganci, T., Baygu, Y., Gök, Y. & Ak, M. Disulfide-linked symmetric N-alkyl carbazole derivative as a new electroactive monomer for electrochromic applications. Synth. Met. 244, 120–127 (2018).
Szlapa-Kula, A. et al. Synthesis, electrochemistry and optical properties with electroluminescence ability of new multisubstituted naphthalene derivatives with thiophene and carbazole motifs. J. Lumin. 196, 244–255 (2018).
Laba, K., Lapkowski, M., Officer, D. L., Wagner, P. & Data, P. Electrochemical and optical aspects of cobalt meso-carbazole substituted porphyrin complexes. Electrochim. Acta 330, 135140 (2020).
Moreno, E. et al. 1,4-Di-N-oxide quinoxaline-2-carboxamide: cyclic voltammetry and relationship between electrochemical behavior, structure and anti-tuberculosis activity. Electrochim. Acta 56, 3270–3275 (2011).
Moreno-Viguri, E. & Pérez, S. Quinoxaline 1,4-di-N-oxide derivatives: interest in the treatment of chagas disease. Rev. Virtual de Química 5, 1101 (2013).
Yadav, D. U. & Kumar, D. Study of heterocyclic compound—pyrrole. IJRST 5 (2015).
Lakhdar, S. et al. Nucleophilic reactivities of indoles. J. Org. Chem. 71, 9088–9095 (2006).
Chylewska, A., Biedulska, M., Głębocka, A., Raczyńska, E. D. & Makowski, M. Drug-like properties and complete physicochemical profile of pyrazine-2-amidoxime: a combined multi-experimental and computational studies. J. Mol. Liq. 276, 453–470 (2019).
Masoud, M., Mostafa, M., Ahmed, R. H. & Moneim, N. Structures and chemical equilibria of some N-heterocycles containing amide linkages. Molecules 8, 430–438 (2003).
Morin, J.-F., Leclerc, M., Adès, D. & Siove, A. Polycarbazoles: 25 years of progress. Macromol. Rapid Commun. 26, 761–778 (2005).
Macit, H., Sen, S. & Saçak, M. Electrochemical synthesis and characterization of polycarbazole. J. Appl. Polym. Sci. 96, 894–898 (2005).
Zhuang, D.-X. & Chen, P.-Y. Electrochemical formation of polycarbazole films in air- and water-stable room-temperature ionic liquids. J. Electroanal. Chem. 626, 197–200 (2009).
Karon, K. & Lapkowski, M. Carbazole electrochemistry: a short review. J. Solid State Electrochem. 19, 2601–2610 (2015).
Shah, A., Zaheer, M., Qureshi, R., Akhter, Z. & Nazar, M. F. Voltammetric and spectroscopic investigations of 4-nitrophenylferrocene interacting with DNA. Spectrochim. Acta A Mol. Biomol. Spectrosc. 75, 1082–1087 (2010).
Diamant, Y. et al. Electrochemical polymerization, optical and electrical characterizations of polycarbazole on single wall carbon nanotubes. Synth. Met. 151, 202–207 (2005).
Exner, O. Calculating equilibrium constants from spectral data: reliability of the Benesi–Hildebrand method and its modifications. Chemometr. Intell. Lab. Syst. 39, 85–93 (1997).
Thevissen, K., Marchand, A., Chaltin, P., Meert, E. M. K. & Cammue, B. P. A. Antifungal carbazoles. Curr. Med. Chem. 16, 2205–2211 (2009).
Caruso, A. et al. Carbazole derivatives as antiviral agents: an overview. Molecules 24, 1912 (2019).
Issa, S. et al. Carbazole scaffolds in cancer therapy: a review from 2012 to 2018. J. Enzyme Inhib. Med. Chem. 34, 1321–1346 (2019).
Clausen, J. D. et al. Elucidation of antimicrobial activity and mechanism of action by N-substituted carbazole derivatives. Bioorg. Med. Chem. Lett. 27, 4564–4570 (2017).
Akiyama, M. et al. Nuclear factor-kappaB p65 mediates tumor necrosis factor alpha-induced nuclear translocation of telomerase reverse transcriptase protein. Cancer Res. 63, 18–21 (2003).
Bannan, C. C., Calabró, G., Kyu, D. Y. & Mobley, D. L. Calculating partition coefficients of small molecules in octanol/water and cyclohexane/water. J. Chem. Theory Comput. 12, 4015–4024 (2016).
Nelson, M. L., Grier, M. C., Barbaro, S. E. & Ismail, M. Y. Polyfunctional antibiotics affecting bacterial membrane dynamics. AntiInfect. Agents Med. Chem. 8, 3–16 (2009).
Lehtinen, J., Nuutila, J. & Lilius, E.-M. Green fluorescent protein–propidium iodide (GFP-PI) based assay for flow cytometric measurement of bacterial viability. Cytometry Part A 60A, 165–172 (2004).
Białobrzeska, W., Niedziałkowski, P., Malinowska, N., Cebula, Z. & Ossowski, T. Analysis of interactions between calf thymus DNA and 1,5-di(piperazin-1-yl)anthracene-9,10-dione using spectroscopic and electrochemical methods. J. Mol. Liq. 289, 111080 (2019).
Bouwman, E. et al. Two different copper(II) coordination geometries imposed by two closely related chelating imidazole-thioether (N2S2) ligands. Crystal structures of (1,6-bis(4-imidazolyl)-2,5-dithiahexane)chlorocopper(II) tetrafluoroborate, (1,6-bis(5-methyl-4-imidazolyl)-2,5-dithiahexane)chloro(tetrafluoroborato)copper(II), and (1,6-bis(5-methyl-4-imidazolyl)-2,5-dithiahexane)nitrato(thiocyanato-N)copper(II). Inorg. Chem. 27, 4614–4618 (1988).
Acknowledgements
This work was financially supported by a grant from the National Centre for Research and Development STRATEGMED3/306853/9/NCBR/2017.
Author information
Authors and Affiliations
Contributions
Conceptualization, A.C., M.M., Methodology, A.C., A.D., S.R., M.O., N.M.; validation, A.C., A.D.; formal analysis, M.O., N.M., A.C., S.R.; writing—original draft preparation, A.C., M.M., A.D., S.R.; N.M., M.O.; graphical conceptualization: A.C.; writing—review and editing, A.C., M.M., M. B.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Chylewska, A., Dąbrowska, A.M., Ramotowska, S. et al. Photosensitive and pH-dependent activity of pyrazine-functionalized carbazole derivative as promising antifungal and imaging agent. Sci Rep 10, 11767 (2020). https://doi.org/10.1038/s41598-020-68758-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-020-68758-w
- Springer Nature Limited
This article is cited by
-
Targeting yeast topoisomerase II by imidazo and triazoloacridinone derivatives resulting in their antifungal activity
Scientific Reports (2024)
-
Evaluation of the Binding Properties of A New Phenylurea Appended Carbazole Compound to Pepsin/Trypsin by Computational and Multi-Spectral Analysis
Journal of Fluorescence (2023)