Abstract
Oysters are unusual among bivalves in that they possess chambers, often filled with soft, chalky calcite, that are irregularly scattered throughout the shell. Because the function of these so-called chalky deposits is still unclear, evaluating the growth and distribution of chalk is important for elucidating the ecological function of this unique shell trait. Specimens of the Pacific oyster Magallana gigas, an oyster well known for chalk expression, were grown in Bodega Harbor, Bodega Bay, CA. At the end of an 11 month growing period, specimens were culled and selected animals were submitted for x-ray computed-tomography imaging. Three-dimensional reconstructions of oyster shells were used to assess the overall distribution of chalk, and also to better understand the relationship between chalk and other structures within the shell. Results indicate that chalky deposits underly sculptural features on the shell exterior, such as external ridges and changes in growth direction, and also that there is a relationship between chalk formation and oyster processes of cementation. Overall, chalk is useful for a cementing lifestyle because it enables morphological plasticity needed to conform to irregular substrates, but also acts as a cheap building material to facilitate rapid growth.
Similar content being viewed by others
Introduction
Many researchers have used preserved remains of shells (molluscan or otherwise) to improve scientific understanding of paleoecosystems and organismal interactions in the fossil record1,2,3. Oysters (Bivalvia: Ostreidae) have utility in this setting because they are well preserved in the fossil record, and are widely geographically distributed in paleo and modern ecosystems4. Moreover, stable isotope and elemental records derived from bivalve shell carbonate reflects the environmental conditions in which the shell grew5,6,7,8,9. These geochemical datasets have been used to develop proxies, reconstruct paleoclimate, and characterize the environment in which fossil oysters lived (e.g. estuarine versus fully marine)10,11,12,13. Stable isotopes have also been used to assess growth rate, season of death, and the occurrence of phytoplankton blooms in both modern and fossil Ostreids14,15,16.
Oyster shells are composed primarily of foliated calcite interspersed with lens shaped chambers17,18. These chambers are irregularly interspersed throughout the shell and are often filled with porous calcite, also referred to as chalk or chalk deposits. It is important to note that chalk is distinct from the vesicular calcite formed by some members of Gryphaeidae (Ostreoidea), which consists of hollow columnar spaces composed of granular calcite, as opposed to the interconnected calcite laths that are characteristic of chalk19,20. Chambers and chalky deposits are found in both extant and fossil oysters, though the function of these features, particularly chalk and how it forms, has been the subject of much scientific inquiry (e.g.21,22,23). Ontogenetically, the formation of chalk commences after the transition to the dissoconch stage when the oyster settles as spat, and continues throughout adulthood24. Numerous authors have hypothesized about the mechanism of chalk formation. While some studies have proposed that chalk is precipitated by the animal itself as regulated by the mantle25,26,27, others have suggested that the unique crystal structure of this feature indicates that it is a product of microbial mineralization within the oyster shell18,23,28. Finally, recent work suggests that chalk is formed when the mantle pulls away from previously deposited shell material more quickly than for folia, resulting in the porous microstructure of chalk20. Overall, differences between the formation and initiation of chalk instead of foliated calcite remains unclear. A more complete understanding of how this shell feature precipitates could also inform interpretations of fossil record and geochemical archives of oyster shells. For example, if chalk and folia are not precipitated simultaneously by oysters, then proxy data taken from only folia would not necessarily represent a continuous record.
The goal of the present research is to further characterize the growth and structure of chalky deposits in Magallana gigas (also known as Crassostrea gigas), the Pacific oyster, and to use these data to better understand the ecological function of this trait in oysters. A cohort of oysters was reared in Bodega Bay from June 2016 to May 2017. Select individuals, the twenty largest oysters that also possessed a shell shape typical of the cohort, were sacrificed, and shells were imaged using a micro X-Ray Computed Tomography (CT) scanner, which provided high-resolution 3D visualization of shells, chambers, and chalk.
Results
Visual description of shells
Like all M. gigas, shells from oysters grown in Bodega Harbor possess two oval calcareous valves of unequal convexity. The left cementing valves are generally deeply convex (i.e. cup shaped with high inflation), whereas the right non-cementing valves are flat or planar (Fig. 1). The two valves are hinged dorsally near the characteristic beak, or umbo, on the left valve. The valves are held together by an organic ligament as well as articulating teeth on the hinge, which are present on the interior surface of both valves. The ventral margin, or commissure, is able to open freely, and each valve tapers to a fine edge before transitioning to a very thin layer of periostracum, the outermost organic layer of the shell.
Accretionary growth of M. gigas proceeds with the addition of material from the umbo towards the commissure, and shell thickening is achieved by addition of material to the interior shell surface. Conspicuous on the exterior of shells are radial ridges, hereafter referred to as ridges, that trend from the umbo to the commissure. These ridges may extend to the commissure itself, but may terminate closer to the umbo. The exterior surfaces of oyster shells possess concentric laminae, which represent the lateral growth of the organism from the umbo towards the commissure. Some of these laminae terminate abruptly in terrace-like features on the shell, marking a transition from outward growth to growth that is oblique to the previous growing plane (i.e. more inward growth), resulting in higher inflation and a more deeply cupped shape for left valves (Fig. 1). These areas where growth direction changes abruptly will hereafter be referred to as growth breaks. Chalky deposits occur from just inside the commissure to the umbonal region, and vary widely in size and shape (Fig. 1). Also present on the interior surface of both valves is the oval adductor muscle scar.
Shape of typical shells
M. gigas specimens CG1-A01, CG1-A02, CG1-A03, and CG1-A04 were chosen for CT imaging because they possessed a shell shape and other morphological characteristics that were commonly observed in the oysters grown in Bodega Harbor (Fig. 2). On average, shells submitted for scanning were 59.0 ± 6.2 mm (n = 5) from umbo to commissure (i.e. shell length), and 46.4 ± 8.1 mm wide (n = 5), where width was measured at the widest point perpendicular to the shell length. Inflation of shells, measured as the maximum distance left valve and the hinge line between the umbo and the commissure, averages 14.2 ± 3.1 mm (n = 5).
Valves were approximately 2–3 mm thick near the commissure before tapering to a fine edge, but were thicker towards the umbo, which was 5–6 mm thick in most specimens. The number and size of ridges expressed on shell exteriors varies widely amongst the oysters. For example, CG1-A01 displays six ridges, 1–2 mm in width, that are easily identifiable on the shell surface (Fig. 2A,B). In contrast, CG1-A02 does not have any ridges that contact underlying shell layers, but has pronounced growth breaks where the overhanging shell layer terminates in ridges (Fig. 2C,D). CG1-A03 has just three ridges on the shell exterior, and only has distinct growth breaks near the commissure (Fig. 2E,F). Ridges within a single specimen also vary in length, and may extend over the full length of the shell, or end closer towards the umbo. Changes in growth direction occur both as growth breaks, which result in higher inflation of valves, and as a change in the primary growth direction of the valve. The latter phenomenon yields a curved shell shape, which is exemplified by specimen CG1-A02 that has a crescent shaped umbo, indicating a change in growth direction early in ontogeny (Fig. 2C).
Shape of recemented shells
Shells that recemented onto a hard substrate, such as another oyster or cage mesh material, display much greater variability in shell morphology than their counterparts that remained unattached throughout ontogeny. The commissures of animals that recemented are still generally ovate, but may also possess outgrowths that make the shell margin outline highly irregular (Fig. 2J). In addition, while the commissure of specimens CG1-A01 through CG1-A04 lie primarily in the same plane, the shell margin of CG1-A05 does not and the contour of the commissural margin may be convex or concave. Finally, recemented shells tend to retain the shape of the object onto which they were growing. For example, CG1-A05 retains the waffle-like pattern of the cage mesh onto which it had recemented (Fig. 2I). This texture, a result of growing onto cage mesh, can also be seen in specimen CG0-A01 (Fig. 2K,L). Though CG0-A01 was not submitted for CT scanning, it represents an excellent example of the morphological plasticity exhibited by specimens that grew onto another substrate. Cross sections of the suture zones of recemented oysters, specimen CG1-005 and two additional pairs of animals, showed that while chalk was abundant where oysters grew onto one another, there was no chalk laid down outside of an individuals’ periostracum (Fig. 3).
3D visualization of shells
The calcitic folia are a major component of these oyster shells, and define the structure of the external features. For example, folia define growth breaks (Fig. 4), and ridges are supported by complex structures composed of folia, creating the sculptures present on the shell exterior (Fig. 5). Three-dimensional reconstructions of oyster shells revealed that chalky deposits are expressed throughout the shell from umbo to commissure (Figs. 4, 5, 6, 7). Smaller chalky deposits are present irregularly throughout shells, including on the interior shell surface. Significant chalk formation occurs in the umbo (Fig. 6), beneath ridges (Fig. 5), and underlying growth breaks (Fig. 4) and other changes in growth direction, such as the curved umbo in CG1-A02. Chalky deposits in the umbo are generally lens shaped and are fully surrounded by folia, apparently sealing them within the shell (Fig. 6).
Discussion
Morphology and distribution of chalk and folia The timing of chalk deposition in relation to folia precipitation has been a long standing question in regards to chalky deposit formation. For bivalves in general it is well recognized that elongation is achieved by the addition of new material in the spiral direction (i.e. to the commissural margin), and shell thickening occurs by the addition of carbonate to the interior shell surface, beneath (i.e. interior to) old shell material17. Chalky deposits observed in 3D reconstructions were found interior and ventral to folia, and most were completely sealed within the shell by surrounding folia. This was true for chalk found in the umbo, as well as chalky deposits that formed directly beneath growth breaks (Figs. 4,6), though it remains unclear if calcification continues in chambers after they are sealed, as has been hypothesized previously23. Although not common, examination of 3D reconstructions also revealed the presence of chalky deposits that were not completely sealed within the shell. These appear to be the result of a small amount of chalk that was precipitated onto folia at the commissure, which was not completely sealed when the next layer of folia was deposited, leaving a small wedge of chalk exposed to the shell exterior (Fig. 5C). The position of folia as exterior to chalk indicates that folia, not chalk, is precipitated as the outermost shell layer that underlies the periostracum, and consequently provides structural support to the shell, as has been noted in previous work29. In addition, the deposition of folia produces external features, such as ridges, growth breaks, and other changes in growth direction, thus creating depressions on the interior shell surface that are subsequently filled with chalk. The pattern of chalk formation beneath growth breaks and other external features confirms previous observations that chalk fills in depressions on the interior surfaces of shells18,20,24,26,27,30,31, but also provides context for how these depressions form.
For oysters, growth breaks represent a significant change in growth direction, and are important in the context of chalk formation because these features are often associated with chalky deposits. Therefore, a more complete understanding of how growth breaks form can help elucidate the function and timing of chalk growth. Based on the observations regarding the relationship between chalk and folia, there are three possible models for shell formation at growth breaks, which all have different implications for the function of chalk in oyster shells, and also the behavior of the mantle during shell formation more generally (Fig. 8).
Model 1 First, the mantle lays down the periostracum (the outermost organic layer of the shell) which is followed by deposition of a thin layer of folia directly beneath, towards the shell interior. Next, the mantle separates from the previously formed shell, and without retracting significantly, begins forming a layer of periostracum and folia at an oblique angle to the previous growing plane, creating a growth break. This new geometry creates a depression on the interior shell surface, directly below where the second layer of periostracum and folia branched off from the first. This depression is subsequently filled with chalk. As the oyster continues to thicken and extend its shell outward, this chalky deposit beneath the growth break is sealed within the shell with a new layer of folia. In Model 1, the growth break is caused by the mantle detaching from the initial layer of periostracum, which may be caused by breakage of the periostracum at the commissure, or some other interruption (Fig. 8: row 1).
Model 2 First, the mantle lays down the periostracum, which is followed by deposition of a thin layer of folia directly beneath the external organic layer. Next, the mantle detaches from the currently forming layer of periostracum and retracts to a point along the previously formed shell. Then, the mantle begins forming a new layer of periostracum and folia, inward from the previous layer, at an angle oblique to the previously growing plane. This new geometry creates a depression on the interior shell surface, directly interior to where the second layer of periostracum and folia branched off from the first. This depression is subsequently filled with chalk. As the oyster continues to thicken and extend its shell outward, this chalky deposit beneath the growth break is sealed within the shell by a new layer of folia. In Model 2, the growth break is also caused by the mantle detaching from the initial layer of periostracum, which may be caused by breakage of the periostracum at the commissure, or some other environmental interruption. This scenario differs from Model 1 in the behavior of the mantle. In Model 2, the mantle retracts and builds new shell material inward from the previous growing plane. In contrast, in Model 1, the mantle does not retract; rather, it moves toward the interior space between valves and precipitates the next layer while remaining extended (Fig. 8: row 2).
Model 3 First, the mantle lays down the periostracum, which is followed by deposition of a thin layer of folia directly beneath the external organic layer. Next, the mantle precipitates a small mound of chalk that extends to the outermost extent of the previously grown shell. The mantle detaches from the currently forming layer of periostracum and retracts to a point along the previously formed shell. Then, a new layer of periostracum and folia is precipitated interior to the initial chalk mound, and extends past this chalky deposit, thus leaving the chalk exposed to the shell exterior. This new growth break also creates a depression on the interior shell surface, directly below the point where the first folia, the umbo end of the chalk mound, and the second layer of folia and periostracum intersect. This space is subsequently filled with chalk, and as the oyster continues to thicken and extend its shell outward, the chalky deposit beneath the growth break is sealed within the shell. Here, the formation of the growth break is not driven by the separation of the mantle from the first layer of periostracum. Instead, the change in growth direction is a result of the formation of the chalk mound, which directs new growth at an angle oblique to the previous growing plane. For shells observed in this study, growth breaks are not associated with chalky deposits (i.e. the initial chalk mound described here) that are exposed to the shell exterior, as in Model 3. Therefore, we can exclude Model 3 as an explanation for growth breaks, and the change in shell growth direction immediately following a growth break (Fig. 8: row 3).
Models 1 and 2 are more difficult to differentiate based on shell morphology alone because as described, they result in the same, or very similar, set of features, and the major differences between these two models concerns the behavior of the mantle during growth break formation. However, other lines of evidence can be used to parse out which model is more likely the to produce the shell features observed. For Model 1, the mantle does not retract and instead moves away from the previous growing plane by pivoting away from the old shell. Therefore, the new layer of periostracum and folia should be the same length as the initial layers, because the mantle has remained fully extended. In contrast, if the mantle retracts (Model 2) and builds the second layer of periostracum outward from old shell material, the newer layers will be shorter (i.e. terminate closer to the umbo than the first layer of folia) until enough growth has occurred to extend new folia past the old shell material. This second pattern has been observed in the cross section in Fig. 1D. Therefore, Model 2, which includes mantle retraction, is the most likely representation of how growth breaks form and how the mantle behaves in this context. In addition, Model 2 agrees well with previous work in which oyster mantles were directly observed to contract during shell formation and cementation32. In an experiment in which the shell margin of the left valve of an oyster was removed, the mantle subsequently began forming a new layer of periostracum on old shell material, dorsal to the commissure (32, Fig. 7B). This illustrates that the mantle does retract in order to form new periostracum and shell outward from old shell material consistent with Model 2. Additional observational work, such as that performed by Yamaguchi32, coupled with careful measurements to establish how far back the mantle retracts during growth break formation, would yield definitive evidence to support Model 1 or Model 2.
Chalky deposits and cementation Chalky deposits were observed to be extensive at sites where shells reattached to a substrate, such as where oysters cemented to other individuals or cage mesh material (Figs 2L, 7). For oysters that recemented onto cage material, the periostracum was the outermost layer, indicating it was laid down first to conform to the irregular surface. Similar observations were also made by Yamaguchi32, who also proposed that the mantle is an active participant in shell cementation by pressing newly made periostracum into the substrate, thus promoting attachment. Therefore, chalky deposits are involved in cementation at least to the extent that chalk allows the oyster to conform to an uneven substrate while maintaining a favorable internal space.
Interestingly, Harper33 recorded the presence of a chalky deposit outside of an M. gigas shell, between the periostracum and the substrate. If the presence of chalk between the shell and the substrate is a common occurrence, then this would indicate that chalk plays a more central role in cementation than simply conferring the ability to conform to an uneven substrate. In the present study, three pairs of oysters that had recemented to one another were sectioned and examined for these chalky deposits occurring outside of the periostraca (Fig. 3). However, none were found. Although this may indicate that a larger sample size is required to survey for this phenomenon, we propose that external chalky deposits, such as that found by Harper33, were aberrant. This indicates that chalk is generally not directly used for oyster attachment. But, how was the chalk observed by Harper33 emplaced between the periostracum and the substrate?
While the mantle pressing of the periostracum to the substrate may be one component of the cementation process for M. gigas32, a mantle-produced organic-inorganic adhesive plays a central role in attaching oysters to the substrate. Harper33 hypothesized that the organic fraction of the cement is able to move through the permeable periostracum to fill the space between this layer and the substratum, thus attaching the oyster. There is additional evidence to suggest that mantle secreted organics play a central role in determining crystal morphology in molluscan shells34,35,36,37,38,39. Thus, if the mantle-secreted organic precursors to chalky calcite were inadvertently leaked through the porous periostracum, this may explain the present of chalk in a space that would normally be occupied by cement33. While this remains a speculative hypothesis, additional work characterizing the organic constituents of shell layers, and addressing the ability of these organics to mobilize through the periostracum, would help to resolve these questions.
Functional ecology of chalk Data presented here indicate that chalk is associated with morphological variability in M. gigas, and is useful for cementation because it allows the animal to conform to an irregular substrate while maintaining a favorable internal space. Although many other bivalves are able to achieve a cementing lifestyle without the use of chalk, the high porosity of chalk produces a shell structure that is much less dense than surrounding folia19,40. In addition, chalk formation is associated with rapid growth rates, and very large, thick shells10,23. This indicates that chalk, in addition to being useful for cementation and accommodating morphologic plasticity, enables rapid shell growth by acting as a relatively cheap building material during shell construction. Future work comparing the strength or durability of cementation in oysters that produce chalk versus oysters and other cementing bivalves that do not (e.g. Chamids) would provide additional insight into the tradeoffs associated with using this material to aid cementation. Last, although recent work suggests that folia and chalk are precipitated synchronously20,41, open questions remain regarding the timing of folia versus chalk deposition within the shell. Additional experiments employing both marking techniques (e.g. calcein) and stable isotope geochemistry would help to determine the temporal relationship between chalk and folia, particularly as it relates to the formation of growth breaks and other features discussed here.
Methods
Study organism, oyster culturing, and environmental setting
For this study, chalky deposit formation was investigated in M. gigas, which is commonly farmed on the coast of California. All specimens of M. gigas obtained for this experiment were spawned by by Hawaiian Shellfish LLC. In nature, oyster larvae undergo a metamorphosis during which they settle to the seafloor as spat (juveniles) and cement themselves to a hard substrate, which may either be a rocky substrate or another oyster42. Aquaculture practices regularly sort and separate juvenile oysters by size, yielding singles (i.e. individual oysters that are unattached to other individuals) that are suitable for commercial purposes. When settled juveniles reached a size of 1.4 mm (+/− 0.2 mm) they were placed on ice and shipped overnight to the Starbird Mariculture, Inc facility in Bodega Harbor, Bodega Bay, CA (38\(^{\circ }\)19’41.56”N, 123\(^{\circ }\)03′22.61″W). Oysters were grown in the Floating Commercial Upweller System (FLUPSY) at Starbird Mariculture Inc. until they reached a size of 4–5 mm (approximately 4–7 months old). At this time, oysters used for this experiment were separated and moved to mesh cages that were secured to a dock in Bodega Harbor immediately adjacent to the FLUPSY and all specimens were initially singles (i.e. unattached to other individuals). Oysters were monitored and cleaned of epibionts approximately every 2–3 weeks. The permits necessary for outplanting oysters and using the following protocols were obtained from the California Department of Fish and Wildlife.
Bodega Harbor is a relatively shallow bay on the California coast that is protected from wave action by two parallel jetties at its entrance. The harbor is well ventilated and is almost completely flushed during each tidal cycle. Bodega Harbor receives little freshwater input from April to November, and is periodically exposed to nutrient rich water during strong upwelling events43.
Computed tomography
Oyster specimens that were submitted for computed tomography (CT) scanning were moved from the FLUPSY to synthetic mesh cages on June 19, 2016. The five specimens listed in Table 1 were sacrificed on May 5, 2017 and submitted for CT analysis thereafter. Specimens CG1-001 through CG1-004 were singles that were selected because they displayed shell morphology that was representative of the rest of the population. Over the course of this experiment it became apparent that oysters were able to secondarily cement to a hard substrate long after the initial settlement phase, including to other oysters and the cages themselves. CG1-005 was selected as an example of two singles that cemented onto one another and cage material, yielding a specimen with two individuals. A separate oyster cohort was outplanted prior to the primary group for a separate experiment and reared under the same conditions until animals were culled. One specimen from this group, CG0-A01, was used for the present study because it also exemplified the effect of cementation on shell morphology. However, this specimen was not submitted for CT-scanning because it was too large for the scanner.
X-ray tomographic images were obtained on the Zeiss Xradia 520 Versa (Carl Zeiss Microscopy, Inc.) with the Flat Panel extension at the UC Davis Center for Molecular and Genomic Imaging (CMGI). This produced 46 um x 46 um x 46 um voxels. Center for Active Visualization in the Earth Sciences (http://KeckCAVES.org) open source software for 3D visualization was used to view scans, specifically Vrui44 and 3DVisualizer45.
Recemented shell cross sections
To characterize attachment of oysters that recemented to one another (i.e. non-singles), specimen CG1-005 and two additional oysters randomly selected from the same cohort that were not submitted for CT scanning were sectioned through the suture zone between two individuals. This was done using a Buehler IsoMet low-speed saw. The cut surface was ground using a 600 grit diamond wheel, and the shell-half was mounted onto a large slide (51mm × 75mm) using Hillquist AB thin section epoxy. Shells were then re-sectioned using Buehler PetroThin thin section saw, resulting in mounted shell sections that were approximately 500–700 \(\mu\)m thick. Sections were digitized using a scanner.
Accession codes
Computed tomography scan files are available in .txm format from Dryad (https://doi.org/10.25338/B8X02M).
References
Cowen, R. Analogies between the recent bivalve Tridacna and the fossil brachiopods Lyttoniacea and Richthofeniacea. Palaeogeogr. Palaeoclimatol. Palaeoecol. 8, 329–344 (1970).
Seilacher, A. Aberrations in Bivalve evolution related to photo- and chemosymbiosis. Hist. Biol. 3, 289–311 (1990).
Leighton, L. R. Inferring predation intensity in the marine fossil record. Paleobiology 28, 328–342 (2002). https://doi.org/10.1666/0094-8373(2002)028<0328:IPIITM>2.0.CO;2
Stenzel, H. B. Oysters. In Treatise on Invertebrate Paleonotlogy, vol. 3 of Mollusca 6: Bivalvia, p. i–iv, N953–N1224 (Geological Society of America, Boulder, Colo., 1971).
Surge, D., Lohmann, K. & Dettman, D. L. Controls on isotopic chemistry of the American oyster, Crassostrea virginica: implications for growth patterns. Palaeogeogr. Palaeoclimatol. Palaeoecol. 172, 283–296. https://doi.org/10.1016/S0031-0182(01)00303-0 (2001).
Surge, D. & Lohmann, K. C. Evaluating Mg/Ca ratios as a temperature proxy in the estuarine oyster, Crassostrea virginica. J. Geophys. Res. 113, 1–9. https://doi.org/10.1029/2007JG000623 (2008).
Ullmann, C. V., Wiechert, U. & Korte, C. Oxygen isotope fluctuations in a modern north sea oyster (Ccrassostrea gigas) compared with annual variations in seawater temperature: Implications for palaeoclimate studies. Chem. Geol. 277, 160–166 (2010).
Ullmann, C. V., Böhm, F., Rickaby, R. E., Wiechert, U. & Korte, C. The giant pacific oyster (Crassostrea gigas) as a modern analog for fossil ostreoids: Isotopic (Ca, O, C) and elemental (Mg/Ca, Sr/Ca, Mn/Ca) proxies. Geochem. Geophys. Geosyst. 14, 4109–4120. https://doi.org/10.1002/ggge.20257 (2013).
Mouchi, V., de Rafélis, M., Lartaud, F., Fialin, M. & Verrecchia, E. Chemical labelling of oyster shells used for time-calibrated high-resolution mg/ca ratios: a tool for estimation of past seasonal temperature variations. Palaeogeogr. Palaeoclimatol. Palaeoecol. 373, 66–74 (2013).
Kirby, M. X. Differences in growth rate and environment between tertiary and quaternary crassostrea oysters. Paleobiology 27, 84–103 (2001).
Brigaud, B., Pucéat, E., Pellenard, P., Vincent, B. & Joachimski, M. M. Climatic fluctuations and seasonality during the late jurassic (oxfordian-early kimmeridgian) inferred from 180 of paris basin oyster shells. Earth Planet. Sci. Lett. 273, 58–67 (2008).
Bougeois, L. et al. A high resolution study of trace elements and stable isotopes in oyster shells to estimate central asian middle eocene seasonality. Chem. Geol. 363, 200–212 (2014).
de Winter, N. J. et al. An assessment of latest cretaceous Pycnodonte vesicularis (lamarck, 1806) shells as records for palaeoseasonality: a multi-proxy investigation. Climate of the Past 14, 725–749 (2018).
Kirby, M. X., Soniat, T. M. & Spero, H. J. Stable isotope sclerochronology of Pleistocene and Recent oyster shells (Crassostrea virginica). Palaios 13, 560–569 (1998).
Goodwin, D. H., Cohen, A. N. & Roopnarine, P. D. Forensics on the half shell: a sclerochronological investigation of a modern biological invasion in San Francisco bay. U.S. Palaios 25, 742–753. https://doi.org/10.2110/palo.2010.p10-015r (2010).
Goodwin, D. H., Gillikin, D. P. & Roopnarine, P. D. Preliminary evaluation of potential stable isotope and trace element productivity proxies in the oyster Crassostrea gigas. Palaeogeogr. Palaeoclimatol. Palaeoecol. 373, 88–97. https://doi.org/10.1016/j.palaeo.2012.03.034 (2013).
Cox, L. R. General features of bivalvia. In Treatise on Invertebrate Paleonotlogy, vol. 1 of Mollusca 6: Bivalvia, chap. General Features of Bivalvia, N3–N121 (Geological Society of America, Boulder, Colo., 1969).
Chinzei, K. & Seilacher, A. Remote biomineralization I: Fill skeletons in vesicular oyster shells. Neues Jahrbuch fur Geologie und Palaontologie 190, 349–361 (1993).
MacDonald, J., Freer, A. & Cusack, M. Alignment of crystallographic c -axis throughout the four distinct microstructural layers of the oyster Crassostrea gigas. Cryst. Growth Des. 10, 1243–1246. https://doi.org/10.1021/cg901263p (2009).
Checa, A. G., Harper, E. M. & González-Segura, A. Structure and crystallography of foliated and chalk shell microstructures of the oyster Magallana: the same materials grown under different conditions. Sci. Rep. 8, 1–12. https://doi.org/10.1038/s41598-018-25923-6 (2018).
Chinzei, K. Shell structure, growth, and functional morphology of an elongate cretaceous oyster. Paleontology 29, 139–154 (1986).
Komatsu, T., Chinzei, K., Zakhera, M. S. & Matsuoka, H. Jurassic soft-bottom oyster Crassostrea from Japan. Palaeontology 45, 1037–1048. https://doi.org/10.1111/1475-4983.00274 (2002).
Vermeij, G. J. The oyster enigma variations: a hypothesis of microbial calcification. Paleobiology 40, 1–13. https://doi.org/10.1666/13002 (2014).
Carriker, M. R. & Palmer, R. E. Ultrastructural morphogenesis of prodissoconch and early dissoconch valves of the oyster Crassostrea virginica. Proc. Natl. Shelfisheries Assoc. 69, 103–128 (1979).
Orton, J. & Amirthalingam, C. Notes on shell-depositions in oysters. J. Mar. Biol. Assoc. UK 14, 935–954 (1927).
Korringa, P. On the nature and function of deposits in the shell of “Chalky” Ostrea edulis Linnaeus. Proc. Calif. Acad. Sci. 27, 133–158 (1951).
Palmer, R. E. & Carriker, M. R. Effects of cultural conditions on morphology of the shell of the oyster Crassostrea virginica. Proc. Natl. Shelfisheries Assoc. 69, 58–72 (1979).
Banker, R. M. & Vermeij, G. J. Oyster microbial communities and implications for chalky deposit formation. Hydrobiologia 816, 121–135 (2018).
Lee, S.-W. et al. Mechanical characteristics and morphological effect of complex crossed structure in biomaterials: fracture mechanics and microstructure of chalky layer in oyster shell. Micron (Oxford, Engl. : 1993) 42, 60–70. https://doi.org/10.1016/j.micron.2010.08.001 (2011).
Chinzei, K. Adaptive significant of lightweight shell structure in soft bottom oysters. N. Jb. Geol. Palaont. Abh. 195, 217–227 (1995).
Chinzei, K. Adaptation of oysters to life on soft substrates. Hist. Biol. 25, 223–231. https://doi.org/10.1080/08912963.2012.727412 (2013).
Yamaguchi, K. Shell structure and behavior related to cementation in oysters. Mar. Biol. 118, 89–100 (1994).
Harper, E. M. Post-larval cementation in the ostreidae and its implications for other cementing bivalvia. J. Molluscan Stud. 58, 37–47 (1991).
Checa, A. G., Rodríguez-Navarro, A. B. & Esteban-Delgado, F. J. The nature and formation of calcitic columnar prismatic shell layers in pteriomorphian bivalves. Biomaterials 26, 6404–6414. https://doi.org/10.1016/j.biomaterials.2005.04.016 (2005).
Marin, F., Luquet, G., Marie, B. & Medakovic, D. Molluscan shell proteins: primary structure, origin, and evolution. Curr. Top. Dev. Biol. 80, 209–76. https://doi.org/10.1016/S0070-2153(07)80006-8 (2008).
Suzuki, M. & Nagasawa, H. Mollusk shell structures and their formation mechanism. Can. J. Zool. 91, 349–366. https://doi.org/10.1139/cjz-2012-0333 (2013).
Joubert, C. et al. Temperature and food influence shell growth and mantle gene expression of shell matrix proteins in the pearl oyster Pinctada margaritifera. PLoS ONE 9, 1–9. https://doi.org/10.1371/journal.pone.0103944 (2014).
Checa, A. G., Macias-Sanchez, E., Harper, E. M. & Cartwright, J. H. E. Organic membranes determine the pattern of the columnar prismatic layer of mollusc shells. Proc. R. Soc. B 283, 20160032 (2016).
Mouchi, V. et al. Chalky versus foliated: a discriminant immunogold labelling of shell microstructures in the edible oyster Crassostrea gigas. Mar. Biol. 163, 1–15. https://doi.org/10.1007/s00227-016-3040-6 (2016).
Meng, Y. et al. Crystallographic interdigitation in oyster shell folia enhances material strength. Cryst. Growth Des. 18, 3753 (2018).
Langlet, D. et al. Experimental and natural cathodoluminescence in the shell of Crassostrea gigas from Thau Lagoon (France): ecological and environmental implications. Mar. Ecol. Prog. Ser. 317, 143–156 (2006).
Bayne, B. Chapter 9—reproduction. In Biology of Oysters, vol. 41 of Developments in Aquaculture and Fisheries Science (ed Bayne, B.) 565 – 701 (Elsevier, 2017). https://doi.org/10.1016/B978-0-12-803472-9.00009-1.
Olyarnik, S. V. & Stachowicz, J. J. Multi-year study of the effects of Ulva sp. blooms on eelgrass Zostera marina. Mar. Ecol. Prog. Seri. 468, 107–117. https://doi.org/10.3354/meps09973 (2012).
Kreylos, O. Advances in Visual Computing, chap. Environment-independent VR development (Spring, Berlin, 2008).
Billen, M. et al. A geoscience perspective on immersive 3d gridded data visualizataion. Comput. Geosci. 34, 1056–1072 (2008).
Acknowledgements
Thanks to Doug Rowland at the UC Davis Center for Molecular and Genomic Imaging for help with computed-tomography. We also thank Geerat Vermeij for providing feedback on earlier iterations of this manuscript. Thanks also to funding sources for this work: the Melbourne R. Carriker Student Research Award from the American Malacological Society and the Ernest E. Hill Fellowship for Environmental Sciences.
Author information
Authors and Affiliations
Contributions
R.M.W.B. conceived, designed, and conducted the experiment and collection of material, performed analysis and interpretation of data, and drafted the manuscript. D.Y.S. performed analysis and interpretation of the data, and reviewed the article for intellectual content.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Banker, R.M.W., Sumner, D.Y. Structure and distribution of chalky deposits in the Pacific oyster using x-ray computed tomography (CT). Sci Rep 10, 12118 (2020). https://doi.org/10.1038/s41598-020-68726-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-020-68726-4
- Springer Nature Limited