Abstract
Antigen-antibody interaction is crucial in autoimmune disease pathogenesis, as multiple sclerosis and neuromyelitis optica. Given that, autoantibodies are essential biomolecules, of which the myelin oligodendrocyte glycoprotein (MOG) can figure as a target. Here we combined Molecular Dynamics (MD), Steered Molecular Dynamics (SMD), and Atomic Force Microscope (AFM) to detail MOG recognition by its specific antibody. The complex model consisted of the MOG external domain interacting with an experimental anti-MOG antibody from the Protein Data Bank (1PKQ). Computational data demonstrated thirteen MOG residues with a robust contribution to the antigen-antibody interaction. Comprising five of the thirteen anchor residues (ASP102, HIS103, SER104, TYR105, and GLN106), the well-known MOG92–106 peptide in complex with the anti-MOG was analysed by AFM and SMD. These analyses evidenced similar force values of 780 pN and 765 pN for computational and experimental MOG92–106 and anti-MOG detachment, respectively. MOG92–106 was responsible for 75% of the total force measured between MOG external domain and anti-MOG, holding the interaction with the antibody. The antigen-antibody binding was confirmed by Surface Plasmon Resonance (SPR) measurements. Combined approaches presented here can conveniently be adjusted to detail novel molecules in diseases research. This can optimize pre-clinical steps, guiding experiments, reducing costs, and animal model usage.
Similar content being viewed by others
![](https://media.springernature.com/w215h120/springer-static/image/art%3A10.1186%2Fs40478-019-0786-3/MediaObjects/40478_2019_786_Fig1_HTML.png)
Introduction
Mechanisms related to healthy and pathogenic events in organisms depend on processes of biorecognition and interaction, particularly those involved in immune response as antigen-antibody binding1. Antibodies are highly-specialized proteins that recognize structural and chemical patterns of foreign elements, named antigens. An antigen-antibody interaction presents specificity and high affinity determined by the complementarity-determinant region (CDR), which is formed by six variable loops in the light (L1, L2, and L3) and heavy (H1, H2, and H3) chains of the antibody1,2,3. In light of their features during an autoimmune response, antibodies are shown to be important by targeting endogenous components in the pathogenesis of demyelinating diseases as multiple sclerosis (MS) and neuromyelitis optica spectrum disorders (NMOSD)4.
In this context, the myelin oligodendrocyte glycoprotein (MOG) has been extensively investigated as a target of autoantibodies in demyelinating diseases’ mechanism5,6, especially in MS7,8 and NMOSD9,10. MOG is a protein with 28 kDa expressed only in the central nervous system (CNS)11. This protein is found in oligodendrocytes and myelin sheath of CNS neurons, representing about 0.05% of the total myelin protein11. The function of MOG remains unclear, but its late expression in the CNS suggests an involvement in the compaction and maintenance of the myelin structure5. Significant information about MOG in the CNS immune response came from experimental autoimmune encephalomyelitis (EAE), an important animal model in demyelinating diseases investigation12. Currently, available data suggest that antibodies against MOG are not restricted to a disease in particular, but could indicate the demyelination of the CNS5,13. In spite of all obtained data, new approaches are needed to complement and enhance available data on the correlation between MOG and demyelinating diseases9,11,14.
Considering the rapid development of nanoscience and nanotechnology, advanced computational methods could be valuable tools for biomolecular interaction description and comprehension as well as they can extensively contribute to the understanding of MOG as a target during the demyelination process15. The application of computational techniques of modelling and simulation in the demyelinating disease research is in the beginning, but showed promising results in the description and characterisation of autoantigens, antigen presenting process, and T-cell activation16,17.
In this work, computational approaches were implemented in the MOG-antibody 3D complex, considering MOG external domain and MOG immunogenic peptides, aiming structural and dynamic data generation for demyelinating diseases understanding. Here, the MOG-antibody interaction was simulated by means of Molecular Dynamics (MD), together with Steered Molecular Dynamics (SMD) and Atomic Force Microscopy techniques, which have identified residues in the MOG structure that anchored the antigen-antibody complex and demonstrated a huge contribution of the MOG92–106 encephalitogenic peptide holding the interaction between the specific external domain of MOG and an experimental anti-MOG antibody.
Results
Antigen-antibody structural fluctuation during complex formation
In order to detail the dynamics of the antigen-antibody interaction, the complex formed by MOG external domain and Fab portion of the experimental MOG-specific antibody, previously described by Breithaupt et al.6, was simulated using MD programs for 200 ns. The structural variation of both MOG and demyelinating antibody Fab portion was monitored and evaluated concerning root-mean-square deviation (RMSD) calculation. RMSD values were obtained considering (a) the anti-MOG Fab portion only; (b) MOG external domain only; and (c) the complex composed of MOG and anti-MOG Fab molecules. Fig. 1a highlights a difference in the structural variation pattern between anti-MOG Fab and MOG external domain. The anti-MOG Fab molecule showed a larger conformational fluctuation than MOG protein during the simulation, presenting average values of 0.63 ± 0.08 nm against 0.30 ± 0.03 nm, respectively. Additionally, Fig. 1b explores the contributions of each Fab region, in which the variable region, including CDR residues, fluctuated more than the constant region. CDR loops, composed of 55 residues in the variable region, were identified in the anti-MOG Fab structure using the abYsis system18 as highlighted in green in the complex structure (Fig. 1b).
Biomolecules structure and antigen-antibody interaction maintenance
The formation of hydrogen bonds between the complex biomolecules and water as well as salt bridges was monitored in the course of MD simulation. Table 1 compares both values obtained in every 20 ns of simulation, which shows that the number of salt bridges decreased, and the hydrogen bond formation increased along the simulation time. Average values calculated for hydrogen bonds and salt bridge formation were 2,093 ± 56 and 65 ± 4, respectively.
Also, considering hydrogen bonds are crucial for the antigen recognition, and binding by an antibody molecule19, they were quantified during the simulation. These measurements considered hydrogen bonds formed between (a) anti-MOG Fab residues and MOG external domain, and (b) CDR residues and MOG external domain (Fig. 2). All the analyses were based on CDR information in the anti-MOG structure described previously using the abYsis system (Fig. 2a,b). The obtained data highlight a CDR contribution of 60% in the total hydrogen bonds involved in the complex maintenance along the simulation (Fig. 2d). In this context, the anti-MOG Fab heavy chain contributed more for antigen-antibody binding than the light chain. Among the six CDRs, H3, H2, and L3 were the most interactive against a minor support from H1, L1, and L2 (Fig. 2c).
Hydrogen bond contribution for antigen-antibody complex formation. (a) The complex formed by the MOG external domain (green) and the anti-MOG Fab portion (light chain highlighted in white and heavy chain in grey). (b) Identification of the six CDR in the anti-MOG Fab structure, in which L1 is shown in red, L2 in blue, L3 in orange, H1 in yellow, H2 in cyan, and H3 in purple. (c) Contributions of CDR residues in terms of hydrogen bonds (black dashed lines) in the interaction between MOG (green) and anti-MOG Fab for every 40 ns of simulation. (d) Hydrogen bonds quantified for the complex in every 10 ns of simulation.
Concerning residues in the MOG external domain structure that anchor the complex with the anti-MOG Fab portion (Fig. 2c); they were identified and ranked according to hydrogen bonds contribution. Thus, from the highest to the lowest contributor, the thirteen MOG residues involved in antigen-antibody hydrogen bonds were: GLU108, GLY1, SER104, HIS103, ASN53, THR33, ASP102, GLN106, GLU107, ARG52, GLN4, TYR105, and TYR40.
Complex free-binding energy analysis
The complex formed by MOG and anti-MOG Fab (Fig. 3a) was described in terms of free-binding energy (ΔGbind) considering parts of the MD trajectory with the lowest RMSD values. Based on the data presented in Fig. 1a, ΔGbind calculation considered 15,000 frames, more precisely from 53 to 68 ns of the simulation, in which was observed a less structural fluctuation. Then, using an interval of 10 ps for the measurements, a set of 1,500 energy values was obtained from the MD trajectory. The average ΔGbind calculated for the complex was −43.1 ± 17.6 kcal mol−1. Our data for electrostatic (ΔEelec) and van der Waals (ΔEvdW) contribution to the ΔGbind calculation were, respectively, −438.4 ± 45.9 kcal mol−1 and −79.0 ± 6.4 kcal mol−1. This lower value for ΔEelec in comparison with ΔEvdW suggested a crucial electrostatic contribution to the complex formation and maintenance. Electrostatics features of the complex were analysed according to the electrostatic potential obtained by APBS (Adaptive Poisson-Boltzmann Solver)20 program (Fig. 3b). Binding sites of both MOG external domain and the anti-MOG Fab portion (Fig. 3c,d, respectively) showed the most interactive regions oppositely charged, indicating a significant role of electrostatics for antigen-antibody complex formation and maintenance.
Electrostatic potential (−3.0 KBT/e to + 3.0 KBT/e) of the MOG-Fab complex. (a) The complex structure composed of MOG external domain (green) and the anti-MOG Fab portion (black). (b) Complex electrostatic potential representation in which the interaction site is represented by the horizontal plane. (c) Superior view of the horizontal plane with the most interactive region of the MOG molecule comprised in the dark square. (d) Inferior view of the horizontal plane with the most interactive region of the anti-MOG Fab portion comprised in the dark square.
SMD and AFM forces involved in MOG-antibody binding
Force values involved in the antigen-antibody interaction were obtained from a set of 40 SMD simulation data considering both the entire external domain of MOG and immunogenic MOG92–106 peptide. The MOG92–106 was chosen for the simulations considering the high proportion of the thirteen MOG anchor residues, identified by hydrogen bond analysis in Fig. 2, concentrated in this peptide (5 of the 13 residues were included in MOG92–106), as better explained in the Discussion section. Fig. 4a shows the evolution of the applied force during 3 ns of simulation considering MOG external domain and the variable region of the anti-MOG Fab portion (Fv) system. According to the presented data, the unbinding event occurred in about 1 ns of SMD simulation after the application of an external force of 1,042 pN, with a standard deviation of 192 pN among all the 20 simulations data.
Fig. 4b illustrates the unbinding dynamics of the complex formed by MOG92–106 immunogenic peptide and the anti-MOG Fv portion based on force values presented in the 20 simulations performed. The average unbinding force was 780 pN measured after about 970 ps of simulation, in which a standard deviation of 128 pN was observed. The Fig. 4 highlights the main steps of the SMD unbinding process: complex maintenance (yellow region), in which the antigen-antibody binding force is higher than the applied external force; detachment process (pink region), in which the applied force is high enough to detach MOG external domain from the Fv portion; and molecules separation (blue region), in which molecules have no interaction. Biomolecules structural changes are also represented in the upper panel of Fig. 4.
The obtained SMD force value for the MOG92–106-Fv portion detachment process is in agreement with the AFM measurements of the same complex, as shown in Fig. 5. AFM force curve (Fig. 5a) indicated an adhesion force (Fad) value of 765 pN, which is included in the AFM boxplot variation range represented in Fig. 5c. Fig. 5b presents the similarity between computational and AFM information, especially considering force values and curve shape. Systems in the Fig. 5c are described regarding the interaction between (1) unfunctionalised tip and rabbit anti-MOG; (2) peptide MOG92–106 and unspecific antibody (anti-glutathione-S-transferase); (3) peptide MOG92–106 and specific antibody (rabbit anti-MOG92–106); and (4) SMD data concerning MOG92–106 and anti-MOG binding.
Surface plasmon resonance (SPR) measurements were carried out in order to confirm the antigen-antibody binding (Fig. 6). The SPR analysis followed the tip functionalisation steps regarding layers deposition via injection. Fig. 6a depicts the angular scan corresponding to the gold sensor functionalised with a self-assembled monolayer of cysteamine hydrochloride (Au/Cys) followed by a protein A (Au/Cys/pA) and the anti-MOG layers (Au/Cys/pA/anti-MOG). A shift in the SPR angle of 0.077° was verified due to the specific interaction with MOG92–106 (Fig. 6b). To evidence the specificity of the interaction between anti-MOG with MOG92–106, an unspecific antibody (anti-GST) was also tested to the MOG92–106 injection. Fig. 6c depicts the real-time behaviour of the systems involving anti-MOG and anti-GST after the injection of MOG92–106.
(a) SPR angular scan of the Au/Cys/pA/anti-MOG sensing surface assembly: Au/Cys in green, Au/Cys/pA in red, and Au/Cys/pA/anti-MOG (sensing surface) in blue; (b) SPR angle shift Δθ due to the specific interaction between the sensing surface in blue with MOG92–106 peptide in black. (c) Real-time Δθ monitoring during the MOG92–106 followed by water injection over the specific anti-MOG in black and unspecific anti-GST surface in grey.
Discussion
This study involved a deep computational investigation of the MOG-antibody complex in aqueous solution. For a significant nanoscale description, available data on MOG structure and its specific antibody6,21 were taken into account together with considerations from the experimental-theoretical interface background of our research group. This study presented the following highlights: (1) Fab portion fluctuation of autoantibodies occurs during the antigen binding; (2) hydrogen bonds and salt bridges are important to the antigen-antibody complex structure maintenance, presenting values inversely related along the time; (3) CDR contribution is significant for properly antigen binding, especially regarding heavy chain residues; (4) electrostatics seems to be decisive during MOG recognition and binding by an antibody; and (5) the peptide MOG92–106 function in the binding process indicated its role as an anchor during MOG external domain recognition by demyelinating antibodies. Each finding is discussed with details in the following paragraphs.
Firstly, a distinct variation profile was noticed between anti-MOG Fab and MOG external domain (Fig. 1a), which showed to be strictly related to the molecule function in the organism. The higher flexibility degree of the anti-MOG Fab structure was expected since it comprises several loops and their mobility is required for a proper antigen binding22,23. Indeed, anti-MOG Fab fluctuation was more influenced by the variable than the constant region (Fig. 1b). Similarly, a more rigid MOG structure, presenting a less variation, is demanded since this protein seems to act in the CNS myelin structure maintenance5.
Hydrogen bonds and salt bridges were useful parameters for the system hydration effects, 3D structure maintenance, and structural stability analysis24,25,26. As can be seen from Table 1, hydrogen bonds and salt bridges values are inversely proportional, which is in agreement with Franca et al.27 and our previous work28 results. This situation may be explained by two factors: (i) salt bridges are weakened by solvation effects26, and (ii) charged amino acids induce new hydrogen bonds with water molecules27,28. Thus, the number of salt bridges decreases and, consequently, the conformational fluctuation is induced along the simulation (Fig. 1a). Additionally, low values of standard deviation of both hydrogen bonds and salt bridges revealed a small variation among measured values. Thus, structural stability and maintenance during the simulation are indicated.
Concerning antigen-antibody interaction, hydrogen bonds presented a pivotal role in complex formation and maintenance. CDR actively supported the antigen binding by the anti-MOG Fab portion, particularly CDR-H3 and H2 in the heavy chain. Light chain CDR, such as L1 and L2, presented a minor contribution in the antigen-antibody binding. Osajima and colleagues29,30 obtained similar results for hydrogen bonds during MD simulations of several Fab-antigen complexes, especially considering a CDR-H3 highest contribution and a CDR-L2 smallest contribution. The most interactive region of MOG was identified, which comprised thirteen residues that anchored the antibody binding. Ten of these residues are related to three MOG peptides referred as encephalitogenic in the literature: MOG1–2231 (GLY1, and GLN4), MOG35–5513 (TYR40, ARG52, and ASN53), and MOG92–10631 (ASP102, HIS103, SER104, TYR105, and GLN106). Also, we found three residues of MOG (THR33, GLU107, and GLU108) closely located to the three referred immunogenic peptides with a relevant contribution to the antigen-antibody complex.
Interestingly, Yannakakis and colleagues16 demonstrated key residues of MOG35–55 in the T-cells stimulation process during the interaction of Human Leukocyte Antigen (HLA), MOG35–55, and T-cell Receptor (TCR) using MD simulation. These results suggested the participation of some MOG residues, particularly TYR40 and ARG52, during the T-cell antigen presentation process. Thus, in comparison with our findings, a correlation between the processes of cellular and humoral response is evidenced with an overlap of key anchor residues.
The measured affinity involved in the antigen-antibody complex complemented our findings on hydrogen bonds established between MOG and anti-MOG Fab molecules. The obtained ΔGbind average value (−43.1 ± 17.6 kcal mol−1) is in agreement with several Fab-antigen complexes analysed by Osajima et al.29,30, who calculated similar values of ΔGbind for these complexes with a major electrostatic contribution for antigen-antibody binding. This finding was expected since electrostatic forces and energies play a central role in the specificity and interaction between biological macromolecules, especially proteins, which are highly charged (Fig. 3b)32,33. According to our data, electrostatic contributions were decisive for the affinity and highly specific antigen-antibody binding, which can be reflected regarding salt bridges and hydrogen bonds formed during the complex maintenance33.
Fig. 3c,d highlight the most interactive region of the MOG and anti-MOG Fab, respectively, with their charges reflected by electrostatic potential. These regions showed to be oppositely charged and, thus, presented a strong interaction during the simulations. They comprise both significant interactive CDR of Fab (H3, H2, and L3) and MOG residues strongly involved in hydrogen bonds (Fig. 2c). So, surface charges showed to be essential for the MOG and Fab binding.
Considering the information extracted from this MD simulation, we selected the MOG92–106 peptide for binding forces analysis by SMD and AFM methods. This peptide showed to actively participate in the interaction with the antibody since it involved a higher number of anchor residues. SMD data were obtained for MOG-Fv and MOG92–106-Fv interaction systems to precisely understand the contribution of specific residues for antigen-antibody binding. For the MOG-Fv system, the obtained results (Fig. 4a) complied with Su and Wang34 study, which presented comparable unbinding force values (~2,000 pN) and shape of SMD force curve for a similar system. For the MOG92–106-Fv system, computational data acquired were successfully validated by AFM measurements considering a similar antigen-antibody complex as shown in Fig. 5.
Fig. 5c boxplots highlight the force values variation of both AFM and SMD experiments, in which 100% of the obtained computational forces were included in the AFM force value range. The position of the SMD median value is contained in the AFM boxplot range, which comprises 50% of the representative force values of experimental adhesion events. This fact denotes the correspondence between the median values of SMD and AFM measurements. Also, these median values were distinct from those presented by control measurements, validating our data.
SPR data experimentally demonstrated both AFM tip functionalisation and antigen-antibody binding. Firstly, Fig. 6a,b evidence the assembling of the sensing surface which each curve shift indicates a new layer deposition. Secondly, binding and specificity of the complex composed of anti-MOG and MOG92–106 could be confirmed (Fig. 6c). In the anti-MOG system, the SPR shift remained after removing the MOG92–106 from the reaction channel via water flux. This occurred due to the specific interaction and formation of the antibody-peptide complex. In the anti-GST system, the SPR signal returned to initial values after removal of the MOG92–106 solution. This was expected considering the absence of interaction between MOG92–106 and anti-GST.
Fig. 4a compared with Fig. 4b suggested a significant contribution of the MOG92–106 peptide to the antigen-antibody interaction concerning forces involved in the complex maintenance. The force values computationally measured for both systems indicate that the force needed to detach the MOG92–106 peptide represent 75% of the total force to completely remove MOG external domain from the complex with the antibody. Thereby, our results suggest a decisive contribution of the MOG92–106 in the MOG recognition by specific demyelinating antibodies, highlighting this peptide as an epitope in the binding of the MOG external domain. Computer-aided techniques showed to be valuable tools in epitope characterisation35,36. In this study, we successfully employed MD and SMD approaches in the identification of the epitope recognized by MOG-demyelinating antibodies for the first time.
To sum up, the present study has provided detailed information concerning the antibody recognition of MOG, a relevant protein in demyelinating disorders. MD and SMD simulations successfully provided molecular details about MOG external domain and its specific antibody interaction. These analyses highlighted several residues related to three encephalitogenic peptides of MOG (MOG1–22, MOG35–55, and MOG92–106) with a significant contribution to the maintenance of the MOG-Fab complex. The affinity and specificity between MOG and the anti-MOG Fab portion were analysed and efficiently proved by computational, AFM, and SPR data. The SMD detachment force for the complex was successfully confirmed by AFM and suggests an important role for the MOG92–106 in the MOG recognition process, holding the entire complex. Further studies involving sample analysis of patients with demyelinating diseases using the sensor device described here could be interesting to confirm the computational results of this paper, as performed in similar studies in our research group15,37,38,39. Significant MOG descriptive data were generated and complied with several decades of MOG research, especially using animal models as EAE11,13. In this context, the application of combined methods as presented here can contribute to the investigation of new molecules related to autoimmune demyelinating disorders.
Methods
System preparation
The initial antigen-antibody 3D structure was obtained based on the crystallographic data of the interaction between the Fab portion of the demyelinating MOG-specific antibody 8–18C5 and MOG external domain from protein data bank (PDB) (PDB ID 1PKQ)6. The complex model included some modifications in the crystallographic structure by adding missing residues and hydrogen atoms according to Franca et al.27 protocol. Then, the refined complex model was inserted in a TIP3P40 simulation box. Some adjustments in the interaction system were assigned before the simulation. Firstly, the Cα atom of the residue number 440 (CYS) in the heavy chain was fixed to mimic the presence of the IgG Fc (fragment crystallizable) portion. Secondly, considering the crystallographic data referring to the MOG extracellular domain description, the Cα atom of the residue number 121 (PHE) in the MOG chain was also fixed, mimicking the presence of intact MOG protein in the myelin plasma membrane.
Molecular Dynamics (MD) simulation and Free-binding energy calculation
MD simulation was carried out using CHARMM36 force field41 within the NAMD 2.9 program42. The input system was minimized under NVT ensemble condition, considering a time step of 2 fs, a cutoff distance of 12 Å for short-range interactions, and particle-mesh Ewald (PME) formalism43. The system temperature was gradually increased to 310 K, and then the equilibration step occurred during 200 ns under NpT ensemble condition at 1 atm and 310 K, respectively, using a Langevin piston44 and thermostat. MD trajectory analysis considered hydrogen bonds and salt bridges formation as well as RMSD of the biomolecules. Hydrogen bonds were quantified via Visual Molecular Dynamics (VMD)45 Hbonds plugin following computational protocols applied for similar antibody systems in the literature29,30,46. A hydrogen bond was quantified when the distance between a hydrogen donor (D) and an acceptor atom (A) was shorter than 3.5 Å as well as the angle H-D-A was shorter than 60.0°. Salt bridges formation was monitored via VMD Salt Bridge plugin according to Ierich et al.28 protocol. A salt bridge was quantified when the distance between the oxygen atom of an acidic residue and the nitrogen atom of a basic residue was shorter than 3.2 Å. Additionally, differences between the initial atomic coordinates and new positions assumed by residues during the simulation were measured using RMSD values.
Finally, the MOG-Fab complex free-binding energy (ΔGbind) was measured from parts of the 200 ns MD simulation trajectory with less structural fluctuation. A total of 15 ns (15,000 frames) was selected for ΔGbind analysis. The estimation of ΔGbind occurred based on the average of the binding energies values obtained for every 10 ps using molecular mechanics combined with the Poisson-Boltzmann surface area (MM/PBSA) method47. MM/PBSA was applied by Calculation of Free Energy (CaFE) plugin48 implemented to VMD program. Additional trajectories required for ΔGbind calculation were obtained using the same protocol described for antigen-antibody complex MD simulation. Poisson-Boltzmann calculation was carried out by APBS program.
SMD simulation protocol
SMD simulations were performed considering the Fv portion of Fab in complex with (a) MOG external domain, and (b) MOG92–106 peptide (Fig. 7).
In the first system (Fig. 7a) the Cα atoms of the residues ARG114 and SER337 were fixed in the antibody. The external force was applied in the Cα atom of the residue PHE121 of MOG external domain structure. In the second system (Fig. 7b), fixed atoms were the same, and the external force was applied in the Cα atom of the first residue (ASP) of the MOG92–106 peptide. For each system, 20 SMD simulations of 3 ns were conducted independently using a spring constant k of 2.15 kcal (mol Å2)−1 at a constant pulling velocity of 0.00005 Å timestep−1 (0.025 Å ps−1).
Atomic force microscope (AFM) measurements
The experiments involving a prototype of AFM-based sensor were performed in a Veeco AFM, Nanoscope VTM model (Veeco Instruments Inc, Plainview, New York, USA), Multimode-VS system, with PicoForce package. For these experiments, silicon nitride AFM tips (DNP-10, Bruker Nano Inc, Billerica, Massachusetts, USA) with a spring constant of 0.03 N/m estimated by Thermo tuneTM (Veeco Instruments Inc, Plainview, New York, USA), and a nominal radius of 20 nm were used. Firstly, tips were sterilized by UV-ozone (ProcleanerTM Pro, Salt Lake City, Utah, EUA). After sterilization process, tip surface was chemically modified. The immobilisation of MOG92–106 peptides (Peptide and Chemistry Laboratory of IQ-USP, University of São Paulo, São Paulo, SP, Brazil) was carried out on a layer composed of (3-aminopropyl)triethoxysilane (APTES, 99%, Sigma-AldrichⓇ, St. Louis, Missouri, USA) and polyethylene glycol (PEG, Sigma-AldrichⓇ, St. Louis, Missouri, USA).
In a similar protocol, the surface of mica substrate (Mica muscovite, Ted Pella Inc., Redding, California, USA) previously cleaved was sterilized, and rabbit IgG anti-MOG92–106 molecules (Rheabiotech, Campinas, SP, Brazil) were immobilised on the sample surface using protein A protocol49. Control experiments were carried out as follow: (1) unfunctionalised tip interacting with substrate treated as described earlier and (2) tip functionalised with MOG peptides interacting with unspecific antibodies (a commercial anti-glutathione-S-transferase). Force-distance curves were obtained in triplicate via AFM in a fluid cell, carried out in phosphate buffered saline pH 7.4 (Sigma-AldrichⓇ, St. Louis, Missouri, USA), and the measured adhesion forces were analysed by Origin program (OriginLab, Northampton, Massachusetts, EUA).
Surface Plasmon resonance (SPR) experiment
SPR measurements were performed with the SPR Navi 200 system (BioNavis, Finland) using Kretschmann configuration50 and wavelength λ = 670 nm. Gold sensors (50 nm-thick, BioNavis, Finland) were cleaned with a mixture of 5 H2O:1 NH4OH:1 H2O2 (v/v) for 10 min at 80 °C and washed extensively with ultrapure water. After, the gold sensors were functionalised overnight with 25 mM aqueous cysteamine hydrochloride. The sensor surface was assembled by further adsorption of protein A (50 μg mL−1 in water) and the layer of anti-MOG (50 μg mL−1 in water). The control measurements (unspecific antibody) were performed with the anti-GST (50 μg mL−1 in water). All the experiments were carried out at 2 °C using water as a carrier under flux of 15 μL min−1.
Data Availability
All data generated or analysed during this study are included in this paper.
References
Sela-Culang, I., Kunik, V. & Ofran, Y. The structural basis of antibody-antigen recognition. Front. Immunol. 4, 302 (2013).
Marillet, S., Lefranc, M.-P., Boudinot, P. & Cazals, F. Novel structural parameters of ig-ag complexes yield a quantitative description of interaction specificity and binding affinity. Front. Immunol. 8 (2017).
Fukuda, N. et al. Role of the mobility of antigen binding site in high affinity antibody elucidated by surface plasmon resonance. J. Biochem. 161, 37–43 (2017).
Kinzel, S. & Weber, M. S. The role of peripheral CNS-directed antibodies in promoting inflammatory CNS demyelination. Brain Sci. 7 (2017).
Mayer, M. C. & Meinl, E. Glycoproteins as targets of autoantibodies in CNS inflammation: MOG and more. Ther. Adv. Neurol. Disord. 5, 147–159 (2012).
Breithaupt, C. et al. Structural insights into the antigenicity of myelin oligodendrocyte glycoprotein. Proc Natl Acad Sci US A 100, 9446–51 (2003).
Spadaro, M. et al. Autoantibodies to MOG in a distinct subgroup of adult multiple sclerosis. Neurol. Neuroimmunol. & Neuroinflammation 3 (2016).
Jarius, S. et al. MOG-IgG in NMO and related disorders: a multicenter study of 50 patients. part 1: Frequency, syndrome specificity, influence of disease activity, long-term course, association with AQP4-IgG, and origin. J. Neuroinflammation 13, 279 (2016).
Passos, G. R. et al. MOG-IgG-associated optic neuritis, encephalitis, and myelitis: Lessons learned from neuromyelitis optica spectrum disorder. Front. Neurol. 9, 1–15 (2018).
Spadaro, M. et al. Histopathology and clinical course of MOG-antibody-associated encephalomyelitis. Annals Clin. Transl. Neurol. 2, 295–301 (2015).
Ramanathan, S., Dale, R. C. & Brilot, F. Anti-MOG antibody: The history, clinical phenotype, and pathogenicity of a serum biomarker for demyelination. Autoimmun. Rev. 15, 307–324 (2016).
Constantinescu, C. S., Farooqi, N., O’Brien, K. & Gran, B. Experimental autoimmune encephalomyelitis (EAE) as a model for multiple sclerosis (MS). Br. J. Pharmacol. 164, 1079–1106 (2011).
Peschl, P., Bradl, M., Höftberger, R., Berger, T. & Reindl, M. Myelin oligodendrocyte glycoprotein: Deciphering a target in inflammatory demyelinating diseases. Front. Immunol. 8, 529 (2017).
Olsson, T. White matter disease: Roles of anti-MOG antibodies in demyelinating diseases. Nat. Rev. Neurol. 7, 248–249 (2011).
Leite, F. L., Hausen, M., Oliveira, G. S., Brum, D. G. & Oliveira, O. N. Nanoneurobiophysics: new challenges for diagnosis and therapy of neurologic disorders. Nanomedicine (London, England) 10, 3417–3419 (2015).
Yannakakis, M. P. et al. Molecular dynamics at the receptor level of immunodominant myelin oligodendrocyte glycoprotein 35–55 epitope implicated in multiple sclerosis. J. Mol. Graph. & Model. 68, 78–86 (2016).
Alberga, D. et al. Comparative molecular dynamics study of neuromyelitis optica-immunoglobulin g binding to aquaporin-4 extracellular domains. Biochimica Et Biophys. Acta 1859, 1326–1334 (2017).
Swindells, M. B. et al. abYsis: Integrated antibody sequence and structure-management, analysis, and prediction. J. Mol. Biol. 429 (2016).
Akiba, H. & Tsumoto, K. Thermodynamics of antibody-antigen interaction revealed by mutation analysis of antibody variable regions. J. Biochem. 158, 1–13 (2015).
Baker, N. A., Sept, D., Joseph, S., Holst, M. J. & McCammon, J. A. Electrostatics of nanosystems: application to microtubules and the ribosome. Proc. Natl. Acad. Sci. United States Am. 98, 10037–10041 (2001).
Corrada, D., Morra, G. & Colombo, G. Investigating allostery in molecular recognition: insights from a computational study of multiple antibody-antigen complexes. The J. Phys. Chem. B 117, 535–552 (2013).
Sotriffer, C. A., Rode, B. M., Varga, J. M. & Liedl, K. R. Elbow flexibility and ligand-induced domain rearrangements in antibody fab NC6.8: large effects of a small hapten. Biophys. J. 79, 614–628 (2000).
Zhang, X. et al. 3d structural fluctuation of IgG1 antibody revealed by individual particle electron tomography. Sci. Reports 5, 9803 (2015).
Petukhov, M., Rychkov, G., Firsov, L. & Serrano, L. H-bonding in protein hydration revisited. Protein Sci.: A Publ. Protein Soc. 13, 2120–2129 (2004).
Bosshard, H. R., Marti, D. N. & Jelesarov, I. Protein stabilization by salt bridges: concepts, experimental approaches and clarification of some misunderstandings. J. molecular recognition: JMR 17, 1–16 (2004).
Xie, N.-Z., Du, Q.-S., Li, J.-X. & Huang, R.-B. Exploring strong interactions in proteins with quantum chemistry and examples of their applications in drug design. PLoS ONE 10 (2015).
Franca, E. F., Leite, F. L., Cunha, R. A., Oliveira, O. N. & Freitas, L. C. G. Designing an enzyme-based nanobiosensor using molecular modeling techniques. Phys. Chem. Chem. Phys. 13, 8894–8899 (2011).
Ierich, J. C. M. et al. A computational protein structure refinement of the yeast acetohydroxyacid synthase. J. Braz. Chem. Soc. 26, 1702–1709 (2015).
Osajima, T., Suzuki, M., Neya, S. & Hoshino, T. Computational and statistical study on the molecular interaction between antigen and antibody. J. Mol. Graph. & Model. 53, 128–139 (2014).
Osajima, T. & Hoshino, T. Roles of the respective loops at complementarity determining region on the antigen-antibody recognition. Comput. Biol. Chem. 64, 368–383 (2016).
Amor, S. et al. Identification of epitopes of myelin oligodendrocyte glycoprotein for the induction of experimental allergic encephalomyelitis in SJL and biozzi AB/h mice. J. Immunol. (Baltimore, Md.: 1950) 153, 4349–4356 (1994).
Zhang, Z., Witham, S. & Alexov, E. On the role of electrostatics on protein-protein interactions. Phys. biology 8, 035001 (2011).
Sinha, N. & Smith-Gill, S. J. Electrostatics in protein binding and function. Curr. Protein & Pept. Sci. 3, 601–614 (2002).
Su, Z.-Y. & Wang, Y.-T. A molecular dynamics simulation of the human lysozyme-camelid VHH HL6 antibody system. Int. J. Mol. Sci. 10, 1719–1727 (2009).
Yang, J. et al. Potent anti-angiogenesis and anti-tumor activity of a novel human anti-VEGF antibody, MIL60. Cell. &. Mol. Immunol. 11, 285–293 (2014).
Potocnakova, L., Bhide, M. & Pulzova, L. B. An introduction to b-cell epitope mapping and in silico epitope prediction. J. Immunol. Res. 2016 (2016).
Garcia, P. et al. A nanobiosensor based on 4-hydroxyphenylpyruvate dioxygenase enzyme for mesotrione detection. IEEE Sensors J. 15, 2106–2113 (2015).
Moraes, A. S. et al. Atrazine detection in liquid using a nanoimmunosensor based on chemically modified atomic force microscopy tips. Sens. Lett. 14, 508–514 (2016).
Rodrigues, L. F. et al. Nanomechanical cantilever-based sensor: An efficient tool to measure the binding between the herbicide mesotrione and 4-hydroxyphenylpyruvate dioxygenase. Nano 12, 1750079 (2017).
Jorgensen, W. L., Chandrasekhar, J., Madura, J. D., Impey, R. W. & Klein, M. L. Comparison of simple potential functions for simulating liquid water. The J. Chem. Phys. 79, 926–935 (1983).
Huang, J. & MacKerell, A. D. CHARMM36 all-atom additive protein force field: validation based on comparison to NMR data. J. Comput. Chem. 34, 2135–2145 (2013).
Phillips, J. C. et al. Scalable molecular dynamics with NAMD. J. Comput. Chem. 26, 1781–1802 (2005).
Darden, T., York, D. & Pedersen, L. Particle mesh ewald: An n.log(n) method for ewald sums in large systems. The J. Chem. Phys. 98, 10089–10092 (1993).
Feller, S. E., Zhang, Y., Pastor, R. W. & Brooks, B. R. Constant pressure molecular dynamics simulation: The langevin piston method. The J. Chem. Phys. 103, 4613–4621 (1995).
Humphrey, W., Dalke, A. & Schulten, K. VMD: visual molecular dynamics. J. Mol. Graph. 14(33–38), 27–28 (1996).
Cheung, L. S.-L. et al. Characterization of monobody scaffold interactions with ligand via force spectroscopy and steered molecular dynamics. Sci. Reports 5, srep08247 (2015).
Kollman, P. A. et al. Calculating structures and free energies of complex molecules: combining molecular mechanics and continuum models. Accounts Chem. Res. 33, 889–897 (2000).
Liu, H. & Hou, T. CaFE: a tool for binding affinity prediction using end-point free energy methods. Bioinforma. (Oxford, England) 32, 2216–2218 (2016).
Coen, M. C. et al. Adsorption and bioactivity of protein a on silicon surfaces studied by AFM and XPS. J. Colloid Interface Sci. 233, 180–189 (2001).
Kretschmann, E. & Raether, H. Radiative decay of non radiative surface plasmons excited by light. Zeitschrift fur Naturforschung A 23, 2135–2136 (1968).
Acknowledgements
The authors would like to thank the São Paulo Research Foundation (FAPESP 2014/12082–4, 2012/50839–4, 2014/21530-0, 2015/05283-6, 2015/06847-0, 2014/26369-3, 2013/09746-5, 2014/15093-7, and 2016/19387-0), Coordination for the Improvement of Higher Education Personnel (CAPES), and CNPq (305069/2016-0 and 459768/2014-0) for their financial support. We acknowledge Prof. Dr. Maria Terêsa Machini and Nancy Mayumi Okuda-Shinagawa from the Institute of Chemistry of the University of São Paulo (IQ-USP) for providing MOG92–106 peptides, and Rheabiotech Laboratory Research and Development for providing specific antibodies for AFM experiments. This work used the resources of the Centro Nacional de Processamento de Alto Desempenho em São Paulo (CENAPAD-SP). The authors also thank the financial support of the National Institute for Science and Technology on Organic Electronics - INEO (CNPq 465572/2014-6, FAPESP 2014/50869-6, and CAPES 23038.000776/201754).
Author information
Authors and Affiliations
Contributions
J.C.M.I., D.G.B., A.S.M. and F.L.L. designed research, performed research, and analysed data. A.S.M., P.S.G. and A.M.H. measured and analysed AFM experiments data. L.A.P. provided support for antibody-based experiments. J.C.M.I., E.F.F., G.S.O. and L.C.G.F. established computational protocols. C.M.M. and M.F. performed SPR measurements. All the authors wrote the paper.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ierich, J.C.M., Brum, D.G., Moraes, A. et al. Antibody-mediated biorecognition of myelin oligodendrocyte glycoprotein: computational evidence of demyelination-related epitopes. Sci Rep 9, 2033 (2019). https://doi.org/10.1038/s41598-018-36578-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-36578-8
- Springer Nature Limited