Abstract
In this study we test whether principal components of the strain rate and stress tensors align within Switzerland. We find that 1) Helvetic Nappes line (HNL) is the relevant tectonic boundary to define different domains of crustal stress/surface strain rates orientations and 2) orientations of T- axes (of moment tensor solutions) and long-term asthenosphere cumulative finite strain (from SKS shear wave splitting) are consistent at the scale of the Alpine arc in Switzerland. At a more local scale, we find that seismic activity and surface deformation are in agreement but in three regions (Basel, Swiss Jura and Ticino); possibly because of the low levels of deformation and/or seismicity. In the Basel area, deep seismicity exists while surface deformation is absent. In the Ticino and the Swiss Jura, where seismic activity is close to absent, surface deformation is detected at a level of ~2 10−8/yr (~6.3 10−16/s).
Similar content being viewed by others
Introduction
Motivation
GPS networks, that measure long-term deformation at the surface, provide a unique opportunity to place seismic activity in context with geological observations resulting of long periods of tectonic activity (i.e. sea-level changes, geology, and erosion rates). Although they highlight various periods of times, the relationship between surface deformation (i.e. GPS), crustal seismicity (i.e. moment tensors principal components), and strain in the asthenosphere (i.e. shear wave splittings) is of genuine interest, both for understanding the origin of the surface deformation observed and quantifying seismic hazard. For instance, the comparison of directions of principal components of both stress and strain tensors helps understanding whether stress accumulates along faults1,2,3,4,5 or through blocks6,7,8, whether seismic ruptures are triggered9,10,11,12,13,14,15, encouraged or impeded16 and, finally, how stress is transferred to surrounding fault systems17,18,19,20. Also, the comparison between strain rates and asthenosphere strains sheds light on the upper mantle strength21,22 and reveals whether the current tectonic period could be responsible and/or parented to the anisotropy detected in the mantle23,24,25.
Across strongly active plate boundaries, linking seismic activity and surface deformation is made easier because strain rates are high (>10−7/yr) and permanent GPS networks are dense26,27,28. There, higher strain rates tend to shorten seismic cycles lengths27, enabling us to document larger portions of the seismic cycle and informing us on the preparation of future mainshocks. For slowly deforming intra-plate regions, however, we understand less about the relationship between surface deformation and seismicity: strain rates are smaller, seismic activity may not be sufficient to deform the surface while seismic hazard may still be significant29,30,31,32. We take Switzerland for an example of this situation and investigate the link between GPS strain rates and the seismicity observed since 2 decades.
Seismic Activity
At the meeting point between the central European platform and the Adria plate (Fig. 1a), Switzerland is at a key location to understand the dynamics of lithosphere in the region. Over the last millennium, historical earthquakes such as for Mw = 6.6 Basel 135633,34,35,36, Mw = 6.2 Churwalden 129537,38, Mw = 6.1 Visp 1855 Valais39,40,41,42,43,44 and Mw = 6.1 Sierre 194645,46 were reported. Since 1500’s six Mw ~ 6.0 events in the wider Valais area47 ruptured different fault systems with an average recurrence interval of ~100 years48. Another peculiarity of Switzerland’s seismicity lies in its depth distribution (Fig. 2a). North of the Helvetic Nappes (HN), hypocentre depths are limited to the upper crust with extreme values up to Moho depths (~35 km) near Luzern, while south of the HN, the earthquakes depths remain shallower than 15 km49,50. The transition from shallow to deep seismicity was interpreted as an indication of high pressure fluids51. Such a transition (topography, geology) between the Swiss Molasses and the Alpine arc domain cannot be confirmed using the moment tensor catalogue: most focal mechanisms (first motions solutions) are of strike-slip type except in the southern Valais (Fig. 2b). This last observation raises questions regarding the tectonic status (active, non-active) and real nature of the Alpine arc’s current dynamics (e.g. resulting of gravitational spreading, surface expression of a lithosphere discontinuity).
Surface Deformation
The surface deformation of the region is limited52,53,54, and is considered to be in agreement with moderate-to-low level of seismic activity. Horizontal strain rates (<10−7/yr) are likely the consequence of the motion of the Adria plate55,56 towards the North-East57,58. Because of current shortening rates are small (<3 mm/yr59) and knowing the total convergence is from 30060 to 480 km61, the Alpine belt is today seen either as inactive62,63 and/or close to isostatic equilibrium64. The latter is in agreement with vertical rates (up to 1.2 mm/yr south of the Helvetic Nappes) observed by both multi-decadal levelling65,66 and GPS measurement campaigns67,68,69,70. Because uplift rates are densely mapped in Switzerland, such a whole-arc view on vertical motions can however be refined. For instance, there is no correlation between elevation of the topography and uplift rates inferred of levelling campaigns, except in the Jura arc (Fig. 3). There, the uplift rates are in agreement with levelling measurements made in the Rhine graben71 or in the Jura very locally72, but are also anti-correlated with elevations in Jura at the arc scale (Fig. 3). On the horizontal plan, the situation is also complex, reflecting the interplay between inherited geology73 and active processes. Together, horizontal convergence and uplift variations74 explain why, even if they remain rare, large magnitude (Mw > 6.0) earthquakes occur37.
In order to understand the tectonics acting in the central Alps in Switzerland, we 1) map the strain rate field measured using GPS during the last 2 decades, 2) investigate whether the HN can be associated with changes of orientations of the principal components of the strain tensors and 3) at last, by comparing those with orientations of P-/T- axes, and fast axes of shear waves splittings, we discuss whether the orientations of principal components of the stress tensors constrained by moderate magnitude seismic events (Ml > 2.0) are compatible with mantle deformation observed in the region63.
Results
At the country scale, shear and extension rates dominate compression rates (Fig. 4a–d). This observation fits well with a crustal seismicity mostly composed of strike-slip events and with previous studies focusing on long-term deformation of central and western Alps75,76. Spatially, the HN cannot be seen as a limit across which strain rates vary. Indeed, in the region of Lausanne and Geneva (shear rates up to ~4.0 10−8 strain/yr, Fig. 4c) and within in the Jura arc (~2.0 10−8 strain/yr), deformation is detected. Unlike seismicity (Fig. 4c), strain rates are spatially homogeneous. However, such a crude view of Switzerland’s surface deformation is quickly challenged by comparisons of seismicity and strain rates performed at a more local scale.
In specific areas, we find apparent discrepancies between strain rates and seismic activity (i.e. occurrence of earthquake).
-
In the central Jura, ~NW-SE extension is found (Fig. 4a) while only low seismicity is observed. This observation appears to be surprising although it is not the first time that extension was constrained across the Jura arc: the same conclusion was reached after mapping the strain field of Switzerland using 3D interpolation of strain rates on a regular grid77; and after a joint processing of the AGNES/COGEAR datasets78. The extension is therefore not due to an artefact of network geometry or an interpolation issue. Due to the poor density of the network in the region, extension across the Neufchatel lake is not the unique mechanism that is able to explain the GPS vector field in this area. The same vector field could be generated by the motion associated with a strike slip fault oriented NW-SE and located between the localities of St Aubin and Yverdon-les-bains. Such faults have been documented in the area79, but further investigation will be necessary to identify which tectonic structure may be responsible for the deformation observed.
-
South of the HN, directions of maximum shortening are parallel to the front, (i.e. ~E-W direction) except in the east near Engadin where shortening directions are ~N-S (Fig. 8b). This observation is well in agreement with observation made across the Italy-Switzerland border80.
-
In the north-western Valais, the ~N-S extension (few ~E-W compression) is in agreement with the focal mechanisms (Fig. 2b) inferred from first motion arrivals81.
-
In the north-east of the Swiss Molasses, no substantial deformation is observed where diffuse seismicity is still observed (Fig. 2c). In the Ticino, both uplift (~1.0 mm/yr) and deformation (2.0 10−8/yr) are observed while MW > 4 earthquakes are absent in historical seismicity catalogues of this area39. There, the GPS network is not dense enough to capture local deformation.
In a situation in which strain rate is detected but earthquake magnitudes are too small to complete a moment tensor analysis, we attempt to use the strain rate field to characterize the regional stress field through the orientation of principal stress component. Indeed, it has been shown21 that the directions of strain rate tensor components inferred from GPS are a good proxy of the principal stress components projected in the horizontal plane (i.e. ~orientation of S H ). Following the same idea, orientations of principal components of the strain rate tensor components with borehole breakouts orientations were successfully compared22. Here, we compare directions of the maximum shortening rates (GPS) with P-/T- axes orientations in order to constrain the orientation of σ1. Comparison of orientations of S H and P- axes have been used in the past to infer the direction of σ1 at the local scale82,83,84 within uncertainties85. The alignment of maximum shortening directions with S H and P- orientations would imply that the lithosphere strain rates and crustal stress fields are consistent. First, we find that strain and stress components orientations are similarly scattered (~20 degrees; Table 1) both north and south of the HN. Interestingly, shortening strains, T- and P- axes orientations rotate across the HN of +32, −28 and −15 degrees N, respectively (Table 1). Rotation is well visible for the strain principal axes along defined profiles but also within groups (Figs 5, 6 and 7). Everywhere, the orientations of maximum shortening and of P- axes fall in the same quadrant (Fig. 8) and are associated with the location of HN (or to the Basal Alpine thrust). Such an agreement suggests that 1) south of the HN the maximum shortening axes directions can be considered a good proxy for the direction of the principal stress component and therefore 2) lithosphere deformation and crustal seismic activity are consistent. The spatial consistency of the rotation for strain/stress datasets, nevertheless of their inherent diversity and of their lack of causality (it is difficult to understand how one induces the other), implies that both strain-rate and stress fields are induced by a same set of forces deforming the crust and possibly the lithosphere at the regional scale. From this spatial analysis we conclude that the HN delimit spatially two regimes of deformation and seismic activity. Variation of the strain rates across the Alpine arc is not visible, suggesting the strain is well distributed across fault systems, as observed in the seismicity catalogue (Fig. 2c).
Regarding the balance between long- and short-term deformation, we complete a comparison between shear wave splittings (SKS phase) and surface deformation. As shown in New-Zealand22 and California 201221, the comparison between surface deformation rate measured by continental (20–50 km spacing) GPS networks and shear-wave splittings measurements allows the comparison between current average lithosphere deformation and vertically cumulated strain as sampled by seismic waves (SKS and SKKS) through, asthenosphere and lithosphere. In western and central Alps, the presence of Lattice Preferred Orientations (LPO) anisotropy (delays δt up to ~2 s) has been detected63. Amplitudes of travel time delays leave little doubt about their origin. Cumulating such large time delays over a wide region while keeping their orientation stable (only +/−17 degrees of variation within Switzerland) would require a strong organization of the deformation of crustal layers in all directions, which is not observed. We conclude then that the strain mapped using SKS splitting’s originates mostly from mantle deformation and the contribution of crustal anisotropy must be limited. However, because of the inherent difficulty to date strain, it is not possible to determine whether the asthenosphere flow was still active and/or only recent using shear-wave splittings only63. Here we have an opportunity to solve this problem by comparing fast axis of shear wave splitting with seismicity and strain/stress fields measured today. South of the HN, the shear-wave splitting directions (38 +/−17 degree north) are consistent with both the orientations of T- axes (26 +/− 25 degree north) but less with directions of maximum extension (−5 +/− 49 degree north). This suggests that 1) a significant amount of finite strain is present through the Alpine arc (they are ~40 degrees off to the GPS extension rates). North of the HN in the Neuchatel area, the directions of fast axes of shear wave splitting’s align with directions of maximum shortening (Fig. 8a and b); implying either decoupling at the base of the lithosphere (or within the crust) exists or that the surface deformation observed is of shallow origin.
Conclusion
Switzerland represents a transition between stable continental regions with infrequent moderate to large magnitude events (Mw < 6) and more active areas where mainshocks (Mw > 6) occur every 50 years or less. We compare GPS surface strain rate field, shear wave splitting measurements, and principal components of crustal stress (P-/T- axes) of Switzerland in order to get a clearer picture of the processes active today. Each dataset gives access to various time- (from 102 yr to >105 yr) and space-scales (from 104 m to 105 m) that we compare in the same framework.
At the country scale, seismicity and lithosphere strain rates are compatible through their respective orientations. We find the HN to be a major discontinuity that allows mapping both the changes of orientations of principal components of strain-rate and stress tensors and the changes in the seismicity depths (Fig. 9). The agreement of long- and short-space scale measurement seems to suggest that the central Alps are not close to experience a rapid extensional collapse such as described elsewhere86,87. The Jura, however, seems to be the place of a current geologic activity (i.e. extension combined with subsidence) that will require more investigations to be better understood.
Strain accumulated in the Valais and the Ticino are of similar amplitudes (~2 10−8/yr), while the seismic moment released in the Ticino is ten times smaller than in the Valais and may therefore either 1) lead to an event of significant magnitude that is not present in today’s historical catalogue for this area or 2) could be explained by the occurrence of dislocation creep. within the lithosphere.
Albeit we suggest that strain rates constrained from surface measurements fit well with the orientations of the stress components in the crust during the period covered by seismicity catalogues, we stay aware that the current lithosphere seismic activity as we measure it today may be well not representative of longer periods of time; the clustered seismicity observed in Switzerland could well suggest that even if slip rates are small today, they may vary over time periods as it has been observed in more active areas16,88,89.
Materials and Methods
A-Datasets
We use two datasets that have their own spatial and temporal resolutions.
-
First, we use a catalogue of moment tensor solutions (first motions) for Switzerland (Mw < 5) to inform us on the orientation of the stress field through the analysis of P- and T- axes orientations. Principal axes of the moment tensor solutions give approximate orientation of the local stress field in the crust and span over the last ~40 years.
-
Second, we use the strain rates computed from GPS velocity fields. Because of the GPS network density (<1 site per 103 km2) interpolation scheme used in this paper (see later for a full description), we are not able to resolve strain rates generated by small fault systems and any shallow sub-surface processes (<5–10 km depth). The GPS strain rate field has then very much to do with lithosphere deformation and less with crust structure. The agreement between stress and strain rate tensors principal components orientations would indicate that crustal and lithosphere deformation are consistent. Two things could mask this agreement: existing fault systems and post-seismic activity. Inherited fault systems can drive the orientation of rupture along fault, orientation that may not necessarily consistent with the stress inferred of borehole breakouts.
The GPS velocity field, results of campaigns carried out over the last 2 decades. We expect the surface velocities to be representative of the interseismic deformation field plus a component of postseismic deformation. Regarding postseismic activity, thanks to studies carried out on the postseismic deformation period that followed the 2004 Mw6 Parkfield90 and the 2009 Mw6.3 L’Aquila91 earthquakes, we know that the postseismic deformation period that follows a Mw6.0 earthquake does not last for more than 15 months. In consequence, as the last Mw ~ 6.0 event in Switzerland occurred in Sierre in 1846, we assume the surface velocity field observed today is not disturbed by large scale postseismic deformation. We expect then that the velocity field observed today is representative of a period that could be longer than the time interval between the oldest and the most recent campaigns.
Geodetic data
We use the GPS surface velocity field (CHTRFv10) resulting of the processing of GPS campaigns (Table 2) and continuous GPS network data by SWISSTOPO teams68,69,92. Data collected in Switzerland have been processed using sites located in Europe (GRAZ, PFA2, PFAN, WETT and ZIM2) allowing a more stable estimation of troposphere state and of the orbits parameters. Formal uncertainties on velocities (<10−5 m/yr) tells us that the velocity field’s estimation is robust but do not reflect well the day to day repeatabilities (~3 mm) usually observed on time-series of permanent sites; even troposphere conditions are well constrained93. For the rest of the study, and in the light of campaign characteristics (first, last epoch), we assume that uncertainties on horizontal velocities components are of 0.1 mm/yr.
Seismic data
The Swiss Seismological Service (SED, http://www.seismo.ethz.ch/index_EN) reports local seismic activity (locations, magnitudes and when possible moment tensors) and routinely estimates moment tensors and earthquake focal mechanisms. This effort resulted in an accurate catalogue of P- and T- axes81,94 made of 211 events located in Switzerland and surrounding areas for the period 1968–2013 (Fig. 2 and Table 3).
As these events represent only a fraction of the seismic moment released during the interseismic period, we supplement the catalogue of moment tensors with the earthquake catalogue ECOS-09 that enable us to map the spatial distribution of the seismic activity (Fig. 2c). The ECOS09 catalogue (http://hitseddb.ethz.ch:8080/ecos09/introduction.html) is complete down to intensity V since 1878, IV since 1964 and Mw3.0 since 197637. We list in Table 3 the characteristics of each earthquake catalogue mentioned above.
B- Strain rate computation method
We completed an inversion of GPS horizontal velocities to constrain the amplitudes and directions of the horizontal strain rate components using the software SSPX version 2D95. The strain rate field has been computed on a regular grid using a nearest-neighbour approach (node interval of 25 km and 6 neighbouring GPS sites included at each grid point in case they are within 50 km of the node). We assume that strain rates are not significant when rates computed from uncertainties on velocities are larger than rates computed using their amplitudes. In other words, at a specific location, if the strain rate computed from uncertainties on velocities is larger than the ones computed using velocity amplitudes, the strain rate at this location is set to zero. This approach, however, does not prevent to be more selective: we consider that any strain rate smaller than 2.10−9 strain/yr (or a relative motion of 2 mm/yr over 1000 km) should not be trusted.
References
Murray, M. H. & Segall, P. Modeling broadscale deformation in northern California and Nevada from plate motions and elastic strain accumulation. Geophys. Res. Lett. 28, 4315–4318 (2001).
Bennett, R. A., Rodi, W. & Reilinger, R. E. Global positioning system constraints on fault slip rates in southern California and northern Baja, Mexico. J. Geophys. Res. 101(21), 943–921,960 (1996).
d’Alessio, M. A., Johanson, I. A., Burgmann, R., Schmidt, D. A. & Murray, M. H. Slicing up the San Francisco Bay Area: block kinematics and fault slip rates from GPS-derived surface velocities. J Geophys Res-Sol Ea 110, B06403 Artn b06403 (2005).
Qizhi, C. et al. A deforming block model for the present-day tectonics of Tibet. J Geophys Res 109, 16–16, https://doi.org/10.1029/2002jb002151 (2004).
Apel, E. V. et al. Independent active microplate tectonics of northeast Asia from GPS velocities and block modeling. Geophys Res Lett 33, https://doi.org/10.1029/2006gl026077 (2006).
England, P. & McKenzie, D. A Thin Viscous Sheet Model for Continental Deformation. Geophysical Journal of the Royal Astronomical Society 70, 295–321 (1982).
Houseman, G. & England, P. Crustal Thickening Versus Lateral Expulsion in the Indian-Asian Continental Collision. J Geophys Res-Sol Ea 98, 12233–12249 (1993).
Garcia-Castellanos, D. & Jimenez-Munt, I. Topographic evolution and climate aridification during continental collision: insights from computer simulations. PLOS one, 1–32, https://doi.org/10.1371/journal.pone.0132252 (2015).
Brodsky, E. E. Long-range triggered earthquakes that continue after the wave train passes. Geophys Res Lett 33 (2006).
Brodsky, E. E. New constraints on mechanisms of remotely triggered seismicity at Long Valley Caldera. J Geophys Res 110, https://doi.org/10.1029/2004jb003211 (2005).
Nadeau, R. M. & Dolenc, D. Nonvolcanic tremors deep beneath the San Andreas Fault. Science 307, 389–389 (2005).
Nadeau, R. M. & Guilhem, A. Nonvolcanic Tremor Evolution and the San Simeon and Parkfield, California, Earthquakes. Science 325, 191–193, https://doi.org/10.1126/science.1174155 (2009).
Pollitz, F. F. & Sacks, I. S. Stress triggering of the 1999 Hector Mine earthquake by transient deformation following the 1992 Landers earthquake. B Seismol Soc Am 92, 1487–1496 (2002).
Parsons, T. Tectonic stressing in California modeled from GPS observations. J Geophys Res-Sol Ea 111, https://doi.org/10.1029/2005jb003946 (2006).
Felzer, K. R. & Brodsky, E. E. Testing the stress shadow hypothesis. J Geophys Res-Sol Ea 110, https://doi.org/10.1029/2004jb003277 (2005).
Houlié, N. & Phillips, R. J. Quaternary rupture behavior of the Karakoram Fault and its relation to the dynamics of the continental lithosphere, NW Himalaya–western Tibet. Tectonophysics 599, 1–7, https://doi.org/10.1016/j.tecto.2013.03.029 (2013).
Toda, S. & Stein, R. S. Response of the San Andreas Fault to the 1983 Coalinga-Nuñez Earthquakes: An Application of Interaction-based Probabilities for Parkfield. J. Geophys. Res. 107 (2002).
Perfettini, H. & Avouac, J. P. Stress transfer and strain rate variations during the seismic cycle. J Geophys Res-Sol Ea 109, https://doi.org/10.1029/2003jb002917 (2004).
Freed, A. M. Earthquake triggering by static, dynamic, and postseismic stress transfer. Annual Review of Earth and Planetary Sciences 33, 335–367, https://doi.org/10.1146/annurev.earth.33.092203.122505 (2005).
Bufe, C. G. Coulomb stress transfer and tectonic loading preceding the 2002 Denali fault earthquake. B Seismol Soc Am 96, 1662–1674, https://doi.org/10.1785/0120050007 (2006).
Houlié, N. & Stern, T. A comparison of GPS solutions for strain and SKS fast directions: implications for modes of shear in the mantle of a plate boundary zone. Earth Planet. Sci. Lett. 345–348, 117–125, https://doi.org/10.1016/j.epsl.2012.06.029 (2012).
Chamberlain, C. J., Houlié, N., Bentham, H. L. M. & Stern, T. A. Lithosphere–asthenosphere interactions near the San Andreas fault. Earth Planet Sc Lett 399, 14–20, https://doi.org/10.1016/j.epsl.2014.04.048 (2014).
Hess, H. H. Seismic Anisotropy of the upper most mantle under oceans. Nature 204, 629–631 (1964).
Vinnik, L. P., Farra, V. & Romanowicz, B. Azimuthal Anisotropy in the Earth from Observations of SKS at GEOSCOPE and NARS Broad-Band Stations. B Seismol Soc Am 79, 1542–1558 (1989).
Silver, P. & Chan, W. Shear wave Splitting and Subcontinental Mantle Deformation. J. Geophys. Res. 96(16), 429–416, 454 (1991).
Trota, A. et al. Deformation studies at Furnas and Sete Cidades Volcanoes (Sao Miguel Island, Azores). Velocities and further investigations. Geophys J Int 166, 952–956, https://doi.org/10.1111/j.1365-246X.2006.03039.x (2006).
Houlié, N. & Romanowicz, B. Asymmetric deformation across the San Francisco Bay Area faults from GPS observations in Northern California. Phys. Earth Planet. Inter. 184, 143–153 (2011).
Hudnut, K. W., Bock, Y., Galetzka, J. E., Webb, F. H. & Young, W. H. In Seismotectonics in convergent plate boundary (eds Y. Fujinawa & A. Yoshida) 167–189 (Terra Scientific Publishing Company, 2002).
Walters, R. J. et al. The 2009 L’Aquila earthquake (central Italy): A source mechanism and implications for seismic hazard. Geophys Res Lett 36, https://doi.org/10.1029/2009gl039337 (2009).
Wiemer, S., Giardini, D., Faeh, D., Deichmann, N. & Sellami, S. Probabilistic seismic hazard assessment of Switzerland: best estimates and uncertainties. Journal of Seismology 13, 449–478, https://doi.org/10.1007/s10950-008-9138-7 (2009).
Giardini, D., Woessner, J. & Danciu, L. Mapping Europe’s Seismic Hazard. Eos 95, https://doi.org/10.1002/2014EO290001 (2014).
Woessner, J. et al. The 2013 European Seismic Hazard Model - Key Components and Results. Bulletin of Earthquake Engineering, 1–44, https://doi.org/10.1007/s10518-015-9795-1 (2015).
Fäh, D. et al. The 1356 Basel earthquake: an interdisciplinary revision. Geophys J Int 178, 351–374, https://doi.org/10.1111/j.1365-246X.2009.04130.x (2009).
Meghraoui, M. et al. Active normal faulting in the upper Rhine graben and paleoseismic identification of the 1356 Basel earthquake. Science 293, 2070–2073, https://doi.org/10.1126/science.1010618 (2001).
Ferry, M., Meghraoui, M., Delouis, B. & Giardini, D. Evidence for Holocene palaeoseismicity along the Basel-Reinach active normal fault (Switzerland): a seismic source for the 1356 earthquake in the Upper Rhine graben. Geophys J Int 160, 554–U552, https://doi.org/10.1111/j.1365-246X.2005.02404.x (2005).
Kozak, J., Cermak, V., Kozak, J. & Cermak, V. Basel Earthquake, 1356 (2010).
Fäh, D. et al. ECOS-09 Earthquake Catalogue of Switzerland Release 2011. Report and Database. Public catalogue. (Swiss Seismological Service ETH Zurich, Zurich, 2011).
Schwarz-Zanetti, G., Deichmann, N., Fah, D., Masciadri, V. & Goll, J. The earthquake in Churwalden (CH) of September 3,1295. Eclogae Geologicae Helvetiae 97, 255–264, https://doi.org/10.1007/s00015-004-1123-8 (2004).
Fäh, D. et al. Earthquake Catalogue Of Switzerland (ECOS) and the related macroseismic database. Eclogae Geologicae Helvetiae 96, 219–236, https://doi.org/10.1007/s00015-003-1087-0 (2003).
Gisler, M., Fah, D. & Deichmann, N. The Valais earthquake of December 9, 1755. Eclogae Geologicae Helvetiae 97, 411–422, https://doi.org/10.1007/s00015-004-1130-9 (2004).
Fritsche, S., Faeh, D., Gisler, M. & Giardini, D. Reconstructing the damage field of the 1855 earthquake in Switzerland: historical investigations on a well-documented event. Geophys J Int 166, 719–731, https://doi.org/10.1111/j.1365-246X.2006.02994.x (2006).
Kozak, J. & Vanek, J. The 1855 Visp (Switzerland) earthquake: Early attempts of earthquake intensity classification. Studia Geophysica Et Geodaetica 50, 147–159, https://doi.org/10.1007/s11200-006-0008-x (2006).
Fritsche, S. & Faeh, D. The 1946 magnitude 6.1 earthquake in the Valais: site-effects as contributor to the damage. Swiss Journal of Geosciences 102, 423–439, https://doi.org/10.1007/s00015-009-1340-2 (2009).
Fritsche, S., Faeh, D. & Schwarz-Zanetti, G. Historical intensity VIII earthquakes along the Rhone valley (Valais, Switzerland): primary and secondary effects. Swiss Journal of Geosciences 105, 1–18, https://doi.org/10.1007/s00015-012-0095-3 (2012).
Fritsche, S. & Fäh, D. The 1946 magnitude 6.1 earthquake in the Valais: site-effects as contributor to the damage. Swiss Journal of Geosciences 102, 423–439, https://doi.org/10.1007/s00015-009-1340-2 (2009).
Wanner, E. & Grütter, M. Edude sur les répliques de tremblement de terre du Valais, de 1946 à 1950. Bulletin de la Murithienne fascicule LX- VII, 24–41 (1950).
Fäh, D. et al. Coupled seismogenic geohazards in Alpine regions. Bollettino Di Geofisica Teorica Ed Applicata 53, 485–508, https://doi.org/10.4430/bgta0048 (2012).
Fäh, D. And the COGEAR Working Group. In 14th World Conference on Earthquake Engineering (Beijing, China, 2008).
Deichmann, N. et al. Earthquakes in Switzerland and surrounding regions during 2011. Swiss Journal of Geosciences 105, 463–476, https://doi.org/10.1007/s00015-012-0116-2 (2012).
Diehl, T. et al. Earthquakes in Switzerland and surrounding regions during 2012. Swiss Journal of Geosciences 106, 543–558 (2013).
Deichmann, N. et al. Earthquakes in Switzerland and surrounding regions during 2001. Eclogae Geologicae Helvetiae 95, 249–262 (2002).
Tesauro, M., Hollenstein, C., Egli, R., Geiger, A. & Kahle, H.-G. Analysis of central western Europe deformation using GPS and seismic data. Journal of Geodynamics 42, 194–209, https://doi.org/10.1016/j.jog.2006.08.001 (2006).
Ustaszewski, K. & Schmid, S. M. Latest Pliocene to recent thick-skinned tectonics at the Upper Rhine Graben – Jura Mountains junction. Swiss J. Geosci. 100, 293–312 (2007).
Villiger, A., Geiger, A., U., M. & Brockmann, E. SWISS 4D: Estimation of the tectonic deformation field of Switzerland based on GPS measurements. Swiss Academy of Sciences (2011).
Anderson, H. & Jackson, J. Active Tectonics of the Adriatic Region. Geophysical Journal of the Royal Astronomical Society 91, 937–983, https://doi.org/10.1111/j.1365-246X.1987.tb01675.x (1987).
Ward, S. N. Constraints on the seismo-tectonics of the central Mediterranean from very long baseline interferometry. Geophys. J. Int. 117, 441–452 (1994).
Nocquet, J. M. & Calais, E. Crustal velocity field of western Europe from permanent GPS array solutions, 1996–2001. Geophys. J. Int. 154, 72–88 (2003).
Battaglia, M., Murray, M., Serpelloni, E. & Bürgmann, R. The Adriatic region: An independent microplate within the Africa-Eurasia collision zone. Geophys. Res. Lett. 31, https://doi.org/10.1029/2004GL019723 (2004).
Serpelloni, E. et al. Kinematics of theWestern Africa-Eurasia plate boundary from focal mechanisms and GPS data. Geophys J Int. 169, 1180–1200, https://doi.org/10.1111/j.1365-246X.2007.03367.x (2007).
Menard, G., Molnar, P. & Platt, J. P. Budget of Crustal Shortening and Subduction of Continental-Crust in the Alps. Tectonics 10, 231–244 (1991).
Schmid, S. M., Pfiffner, O. A., Froitzheim, N., Schonborn, G. & Kissling, E. Geophysical-geological transect and tectonic evolution of the Swiss-Italian Alps. Tectonics 15, 1036–1064, https://doi.org/10.1029/96tc00433 (1996).
Lyon-Caen, H. & Molnar, P. Constraints on the deep structure and dynamic processes beneath the Alps and adjacent regions from an analysis of gravity anomalies. Geophys. J. Int. 99, 19–32 (1989).
Barruol, G., Bonnin, M., Pedersen, H., Bokelmann, G. H. R. & Tiberi, C. Belt-parallel mantle flow beneath a halted continental collision: The Western Alps. Earth Planet Sc Lett 302, 429–438, https://doi.org/10.1016/j.epsl.2010.12.040 (2011).
Champagnac, J. D., Molnar, P., Anderson, R. S., Sue, C. & Delacou, B. Quaternary erosion-induced isostatic rebound in the western Alps. Geology 35, 195–198, https://doi.org/10.1130/g23053a.1 (2007).
Jeanrichard, F. Contributions à l'étude du mouvement vertical des Alpes. Boll. di Geodesia e Cienze Affini 31, 17–40 (1972).
Gubler, E., Kahle, H. G., Klingele, E., Mueller, S. & Olivier, R. Recent Crustal Movements in Switzerland and Their Geophysical Interpretation. Tectonophysics 71, 125, https://doi.org/10.1016/0040-1951(81)90054-8 (1981).
Kahle, H. G. et al. In Deep Structure of the Swiss Alps (eds O.A. Pfiffner et al.) 25–259 (Birkhäuser, 1997).
Brockmann, E. et al. In International Association of Geodesy (ed S. Kenyon et al.)(Springer-Verlag Berlin Heidelberg).
Brockmann, E. & Schlatter, A. In EUREF 2011 conference, May 25–28, 2011.
Schlatter, A., Schneider, D., Geiger, A. & Kahle, H. G. Recent vertical movements from precise levelling in the vicinity of the city of Basel, Switzerland. International Journal of Earth Sciences 94, 507–514, https://doi.org/10.1007/s00531-004-0449-9 (2005).
Fuhrmann, T., Westerhaus, M., Zippelt, K. & Heck, B. Vertical displacement rates in the Upper Rhine Graben area derived from precise leveling. J Geod. 88 (2014).
Madritsch, H. et al. Late Quaternary folding in the Jura Mountains: evidence from syn-erosional deformation of fluvial meanders. 22, 154 (2010).
Schlunegger, F. & Kissling, E. Slab rollback orogeny in the Alps and evolution of the Swiss Molasse basin. Nature Communications 6, 8605, https://doi.org/10.1038/ncomms9605 (2015).
Cenni, N. et al. Present vertical movements in central and northern Italy from GPS data: possible role of natural and anthropic causes. Jour. Geodymanics (2013).
Sue, C. & Tricart, P. Neogene to ongoing normal faulting in the inner western Alps: A major evolution of the late alpine tectonics. Tectonics 22, https://doi.org/10.1029/2002tc001426 (2003).
Delacou, B., Sue, C., Champagnac, J.-D. & Burkhard, M. In Deformation Mechanisms, Rheology and Tectonics: From Minerals to the Lithosphere Vol. 243 Geological Society Special Publication (eds D. Gapais, J. P. Brun, & P. R. Cobbold) 295-310 (2005).
Villiger, A. Improvement of the Kinematic Model of Switzerland (Swiss 4D II) PhD thesis, ETH (2014).
Limpach, P., Villiger, A. & Geiger, A. Swiss National Report on the GEODETIC ACTIVITIES in the years 2011 to 2015 (IUGG, Prague, 2015).
Mock, S. & Herwegh, M. Tectonics of the central Swiss Molasse Basin: Post-Miocene transition to incipient thick-skinned tectonics? Tectonics 36, 1699–1723, https://doi.org/10.1002/2017TC004584 (2017).
Serpelloni, E., Anzidei, M., Baldi, P., Casula, G. & Galvani, A. Crustal velocity and strain-rate fields in Italy and surrounding regions: new results from the analysis of permanent and non-permanent GPSnetworks. Geoph. J. Int. 161, 861–880 (2005).
Kastrup, U. Stress field variations in the Swiss Alps and the northern Alpine foreland derived from inversion of fault plane solutions. J Geophys Res 109, https://doi.org/10.1029/2003jb002550 (2004).
Scheidegger, A. E. The tectonic stress and tectonic motion direction in Europe and Western Asia as calculated from earthquake fault plane solutions. Bull. Seis. Soc. Am. 54, 1519–1528 (1964).
Shirokova, E. I. General features in the orientation of principal stresses in earthquake foci in the Mediterranean-Asian seismic belt. Physics of the Solid Earth, 12–22 (1967).
Hardebeck, J. L. & Michael, A. J. Stress orientations at intermediate angles to the San Andreas Fault, California. J Geophys Res 109, https://doi.org/10.1029/2004jb003239 (2004).
McKenzie, D. The relationship between fault plane solutions for earthquakes and the directions of the principal stresses. B. Seismol. Soc. Am. 59, 591–601 (1969).
Teng, L. S. Extensional collapse of the northern Taiwan mountain belt. Geology 24, 949–952, https://doi.org/10.1130/0091-7613(1996)024<0949:ecotnt>2.3.co;2 (1996).
Platt, J. P. & Vissers, R. L. M. Extensional collapse of thickened continental lithosphere - a working hypothesis for the Alboran sea and Gibraltar arc. Geology 17, 540–543, https://doi.org/10.1130/0091-7613(1989)017<0540:ecotcl>2.3.co;2 (1989).
Walcott, D. The kinematics of the plate boundary zone through New Zealand: a comparison of short- and long- term deformations. Geophys. J. Astr. Soc. 79, 613–633 (1984).
Freed, A. M., Ali, S. T. & Bürgmann, R. Evolution of stress in Southern California for the past 200 years from coseismic, postseismic and interseismic stress changes. Geophys J Int 169, 1164–1179, https://doi.org/10.1111/j.1365-246X.2007.03391.x (2007).
Savage, J. C. & Langbein, J. Postearthquake relaxation after the 2004 M6 Parkfield, California, earthquake and rate-and-state friction. J Geophys. Res. 113, https://doi.org/10.1029/2008JB005723 (2008).
Devoti, R. et al. The coseismic and postseismic deformation of the L’Aquila, 2009 earthquake from repeated GPS measurements. Ital. J. Geosci. 131, 348–358, https://doi.org/10.3301/IJG.2012.15 (2012).
Brockmann, E., Marti, U., Schlatter, A. & Schneider, D. CHCGN activities in Switzerland Activities for a Swiss Combined Geodetic Network. (SWISS TOPO Bern, 2003).
Houlié, N., Funning, G. & Bürgmann, R. Use of a GPS-derived troposphere model to improve InSAR deformation estimates in the San Gabriel Valley, California. Trans. Geosc. Rem. Sensing 54, 5365–5374, https://doi.org/10.1109/TGRS.2016.2561971 (2016).
Marschall, I., Deichmann, N. & Marone, F. Earthquake focal mechanisms and stress orientations in the eastern Swiss Alps. Swiss J. Geosci. 106, 1–12, https://doi.org/10.1007/s00015-013-0129-5 (2013).
Cardozo, N. & Allmendinger, R. SSPX: A program to compute strain from displacement/velocity data. Computers and Geosciences 35, 1343–1357 (2009).
Serpelloni, E., Faccenna, C., Spada, G., Dong, D. & Williams, S. D. P. Vertical GPS ground motion rates in the Euro-Mediterranean region: New evidence of velocity gradients at different spatial scales along the Nubia-Eurasia plate boundary. J. Geophys. Res. Solid Earth 118, 6003–6024, https://doi.org/10.1002/2013JB010102 (2013).
Wagner, M., Kissling, E. & Husen, S. Combining controlled-source seismology and local earthquake tomography to derive a 3-D crustal model of the western Alpine region. Geophys J Int 191, 789–802, https://doi.org/10.1111/j.1365-246X.2012.05655.x (2012).
Spada, M., Bianchi, I., Kissling, E., Agostinetti, N. P. & Wiemer, S. Combining controlled-source seismology and receiver function information to derive 3-D Moho topography for Italy. Geophys J Int 194, 1050–1068, https://doi.org/10.1093/gji/ggt148 (2013).
Wessel, P., Smith, W. H. F., Scharroo, R., Luis, J. F. & Wobbe, F. Generic Mapping Tools: Improved version released. EOS Trans. AGU 94, (409–410 (2013).
Delacou, B., Sue, C., Champagnac, J. D. & Burkhard, M. Present-day geodynamics in the bend of the western and central Alps as constrained by earthquake analysis. Geophys J Int 158, 753–774, https://doi.org/10.1111/j.1365-246X.2004.02320.x (2004).
International Seismological Centre, On-line Bulletin. (International Seismological Centre, Thatcham, United Kingdom, 2015).
Fry, B., Deschamps, F., Kissling, E., Stehly, L. & Giardini, D. Layered azimuthal anisotropy of Rayleigh wave phase velocities in the European Alpine lithosphere inferred from ambient noise. Earth Planet Sc Lett 297, 95–102, https://doi.org/10.1016/j.epsl.2010.06.008 (2010).
Reinecker, J., Tingay, M., Muller, B. & Heidbach, O. Present-day stress orientation in the Molasse Basin. Tectonophysics 482, 129–138, https://doi.org/10.1016/j.tecto.2009.07.021 (2010).
Singer, J., Diehl, T., Husen, S., Kissling, E. & Duretz, T. Alpine lithosphere slab roll back causing lower crustal seismicity in northern foreland. Earth & Planet. Sc. Lett. 397, 42–56 (2014).
Brockmann, E., Schlatter, A., Marti, U. & Schneider, D. CHCGN activities in Switzerland, Activities for a Swiss Combined Geodetic Network. (Swiss topo, 2004).
Deichmann, N. et al. Earthquakes in Switzerland and surrounding regions during 1997. Eclogae Geologicae Helvetiae 91, 237–246 (1998).
Marshall, S. T., Funning, G. J. & Owen, S. E. Fault slip rates and interseismic deformation in the western Transverse Ranges, California. J Geophys Res-Sol Ea 118, 4511–4534, https://doi.org/10.1002/jgrb.50312 (2013).
Acknowledgements
We thank Pr. E. Kissling, Pr. S. Schmid, Dr. A. Villiger, Dr. V. Picotti and the writing club group of SEG for their contributions in improving the manuscript. We also thank Pr. Dr. Niu and Pr. Dr. Schlunegger plus two anonymous reviewers. This work could not have been possible without the support of the ARC1/ARC2 team of the University of Leeds, UK.
Author information
Authors and Affiliations
Contributions
N.H. initial idea; N.H. and J.W. completed the figures design; N.H., J.W., D.G., and M.R. wrote the text.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Houlié, N., Woessner, J., Giardini, D. et al. Lithosphere strain rate and stress field orientations near the Alpine arc in Switzerland. Sci Rep 8, 2018 (2018). https://doi.org/10.1038/s41598-018-20253-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-20253-z
- Springer Nature Limited
This article is cited by
-
The Saint-Ursanne earthquakes of 2000 revisited: evidence for active shallow thrust-faulting in the Jura fold-and-thrust belt
Swiss Journal of Geosciences (2022)
-
How Alpine seismicity relates to lithospheric strength
International Journal of Earth Sciences (2022)
-
Spatial relation of surface faults and crustal seismicity: a first comparison in the region of Switzerland
Acta Geodaetica et Geophysica (2018)